VM Manager doesn't recognize virtual machine

Hi there.
I've created 2 virtual machines (Red Hat with EBS-12i), a vision and a fresh install and I have the VM manager installed in another machine. It all worked fine untill the day that I had to move the machines to another place and I was forced to change the IP of the machines.
After I made the IP changes I lost the access to the vision virtual machine, the VM manager sees the fresh VM but doesn't sees the vision.
Do you know if there is a tool that can probe the VM server to search for the virtual machines or the configuration file where there is the location of the VM?
Thanks and regards,
Ricardo Vilhena

vilhena wrote:
Do you know if there is a tool that can probe the VM server to search for the virtual machines or the configuration file where there is the location of the VM?VM Manager can do that itself. On the Resources tab of VM Manager, select "Virtual Machine Image" and then import --> From Server Pool. It will find all the running VMs that exist in /OVS/running_pool/ that are not already being managed by VM Manager.

Similar Messages

Import Manager doesn't recognize E1MARAM segment

Using MDM_CLNT_EXTR and MATERIAL_EXTRACT object to create IDOC for materials. Use WE14 to send IDOC to XML port. I then use Import Manager to import XML doc into MDM.
If I use a material number range in MDM_CLNT_EXTR that gets multiple materials, the MDM import manager sees the E1MARAM segment as a source table. However, if I only specify 1 material number in the extraction program then the import manager doesn't recognize the E1MARAM segment.
I can open the XML files and see that the segment is there. Does anyone have any experience with this?
Thanks,
-Aaron

Hi,
Are you using standard Import maps or Custom Import map?
Regards,
Rajani

Time Machine doesn't backup Virtual Machines files

I've 90 GB of disk space to backup included 2 Vmware virtuale machines files in a 250 GB external drive. The first file is a Linux Server of 2 GB. The second file is a Win XP installation of about 13 GB.
I've started Time Machine on 21 november and both files have been backuped correctly for 2 days.
After this, none other backups of these files have been made despite their size changes almost every day.
I've checked a little adn it seems those are the only files excluded in Time machine backups and I'm sure that they are not excluded.
Can someone says to me why it happens and how to solve it?
Thanks

I have some additional suggestions for you -- mainly trying to find a workaround for you.
First, if you haven't done so already, make sure your virtual environments are shut off while you do a Back Up Now just in case there's some issue with access to those files while the virtual environments are running.
Next, create a small file (e.g., a Text Edit file) in the folder containing a virtual environment. Do a Back Up Now. Does Time Machine back up that new file? If not then the problem must be at the level of that folder or higher in the file structure (i.e., it's not the virtual environment file itself that's got the problem).
You can work your way up the file hierarchy to find out which folder finally will cause an added file to be backed up.
Next, try this:
Open the Console (all messages) and leave it on screen so you can see if any error messages get thrown.
Open System Preferences / Time Machine. Click on the lock and authenticate if necessary. Click on Options. Drag your virtual environment file into the Do Not Back Up list. If you find an enclosing folder also seems to have this problem drag it in as well (shouldn't hurt to have them both in there).
Now click OK and then exit System Preferences. That should be enough to make this take effect but just to be certain, quit the Console (presuming no useful messages) and Restart the machine.
Once you have logged in again, re-open the Console and then go back into System Preferences / Time Machine / Options. Click on each line you have added to the Do Not Back Up list, in turn, and then click on the "-" at the bottom of the list to remove it from the list.
Click OK to accept these changes. This may trigger an immediate back up but if not exit System Preferences. Now open Time Machine preferences again to watch what happens and do a Back Up Now. Again, keep an eye on the Console for errors.
If this gets your virtual environment files backed up, then try making a change to one of them and do another Back Up Now to see if it is picked up again.
Failing all that, if you have enough disk space on your main drive, try making a copy of a virtual environment file and see if Time Machine will back up the copy. If it does, you might try switching to using the copy. It is possible there is some sort of permissions error in your original that may get corrected when you make the copy.
The last suggestion is even more drastic, but AppleCare will probably ask you to try it:
Create a new user account. Create a new virtual environment from scratch in that user account (do NOT just copy your existing file over). Does Time Machine back that up?
If so, try copying over your original environment file (you can do this through the public "drop box" for example -- make sure the little "+" symbol is showing before you release the file so that a copy is made as opposed to just moving the file (hold Option during the drag and drop to make this happen if it doesn't happen automatically). Does Time Machine back up the copy of your original environment file now in the new user account?
This will isolate whether the problem is system-wide or specific to your current user account.
--Bob

MSI GE70 Doesn't Support Virtual Machines

I'm running Windows 7 x64 on my MSI GE70 and was planning to run a virtual machine for testing purposes. I tried using VMWare Workstation and Oracle VirtualBox but both are showing the same error about VT-X not being enabled/supported. I tried running the MSIHQ Tool and it identified this version of the BIOS on my laptop:
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Fri 03/07/2014 at 20:40:58.01
Mainboard: MS-1756
PCB Version: REV:1.0
BIOS Version: E1756IMS.10F
BIOS Date: 12/18/2012
EC-FW Version:
I tried downloading the most updated version of the GE70's BIOS for Windows 7 and it seems to be of the same version though the release date is 2012-12-26, while my existing BIOS date is 12/18/2012. I'm having doubts that this will resolve the issue since the BIOS version is the same as the one I've downloaded from the MSI website: E1756IMS.10F.

http://yoyoclouds.wordpress.com/2012/04/25/how-to-check-whether-your-pc-has-virtualization-enabled-or-not/
Take a look at that. Most likely Windows isn't configured right for it.

Remote Update Manager doesn't recognize applicable updates

Hi,
We have a script scheduled to run Remote Update Manager on one of our client machines. This machine is currently running OSX 10.8.5 and Adobe Creative Cloud. When looking at Creative Cloud directly, we can clearly see that there are updates available for our Adobe products. Remote Update Manager, however, does not recognize these updates and will therefore not automatically update. This prevents the user from working as they do not have access to administrative credentials used to update these applications.
I have included an example of the returned messages by Remote Update Manager. These logs are pulled as of this morning but, as you can see, still reflect an outdated entry of 10/17/13.
| UpdaterCore library initialized successfully.
10/17/13 09:48:24:600 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:24:600 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore CheckForUpdate...
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | CheckForUpdates completed successfully.
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:25:186 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | Starting UpdaterCore DownloadUpdates...
10/17/13 09:48:25:188 | [WARN] | | AAMEE | Utilities | RemoteUpdateManager | | | No new applicable Updates. Seems like all products are up-to-date.
10/17/13 09:48:25:188 | [INFO] | | AAMEE | Utilities | RemoteUpdateManager | | | **************************************************
10/17/13 09:48:25:189 |
I was wondering if you had any advice on the next steps to resolve.
Thanks,
Evan

Some links that may help
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0
-http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Desktop Manager Doesn't Recognize My Phone

I've recently upgraded my computer from Windows XP to Windows 7, and on my original XP machine, I had DTM installed and it worked just fine with my Bold 9000. On my new Windows 7 machine, I've downloaded Desktop Manager 6.0, installed it, but when I plug in my phone into the computer, the Summary page in DTM still says "Connect your BlackBerry device". I know my computer recognizes my BB, because I can see it listed as 2 drives under My Computer (BB and my removable memory card). How can I get DTM to recognize my phone?

Hi There, I have a similar problem with my 9105. DM does not see my device. I have tried so many things that I am reaching the point where I go back to Windows Mobile. To make matters worse I paid for the Documents To Go upgrade so that I could sync my docs but that to can not see the device either. On the PC (XP) under device manager it shows as connected. And also as further below. Desperate

LaCie Desktop Manager doesn't recognize LaCie RAID with my 2011 MacBook Pro

Hello,
I have a new MacBook Pro 17" but I am not able to use the LaCie Desktop Manager with the LaCie 4big Quadra Enterprise Class RAID. The drive is recognized by the finder via eSATA, FireWire, USB, but is not recognized by the LaCie Desktop Manager. This prevents me from encrypting the drive. The LaCie Desktop Manager could recognize the raid with my early 2008 MacBook Pro.
I'd like to know if anyone else is having the same problem with their 2011 MacBook Pro.
I have been communicating with LaCie support but he tells me that he can't check the same or similar configuration as mine.
Thanks,
Dennis

Looks like the cable is the same if you still have the 2010.
http://www.ifixit.com/MacBook-Parts/MacBook-Pro-15-Inch-Unibody-Mid-2009-Mid-201 0-Early-2011-SATA-SuperDrive-Cable/IF161-040

Desktop Manager doesn't recognize blackberry 8800 series

Hi. I have a blackberry 8800 series and it is having trouble being recognized by the blackberry desktop manager plugged in via the USB cable.
The blackberry desktop manager is version 4.6. It's running on a Windows XP laptop. The account has full administrative access to the laptop.
If you look at the Windows device manager you'll see the blackberry listed.
When you open the blackberry device manager the blackberry PIN is seen for a brief time then it is gone and you see "none".
There is one funny thing that happens. When you originally plug the blackberry in and then turn on the Device Manager, I see a quick install screen come up. That screen goes away quickly.
I've done a clean uninstall of the software. Reinstalled. Taken the battery out and put it back in. Placed the blackberry USB cable in every port still no dice.
I've seen numerous posts on the Internet and on this board with similar issue but, none really solved.
Has anyone seen this strange installation window come up?
Thanks for any help. I really don't want to wipe out either the blackberry or OS on the laptop as there is a time constraint.

I believe that the most recent updates are on the laptop but, I'll check again. I'm nervous that this is an issue with the laptop. It's an older Sony Vaio and may not be able to handle the 8800 series. I looked on Sony's website and updated the Vaio with the most current firmware

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Windows 10 Technical Preview - There is NO "Hyper-v Virtual Machine Management" service???

hi all,
There's no such Windows Topic as "WTP Virtualization", so I post this thread here, a somewhat "VIRTULIZATION" related.
I installed WTP (not server) x64 enterprise 9879, and added "Hyper-v Management" feature (management only, without Hyper-v core) in Control Panel. Then I found that there was no "Hyper-v
Virtual Machine Management" in Services panel, and there was no such file "c:\windows\system32\vmms.exe". Therefore I cannot connect to Windows Server 2012 R2 Hyper-v through WTP Hyper-v Manager.
I confirm the reason is what I state above. Firewall rules are properly configured on both Hyper-v server and WTP. I also used hvxxxx.wsf to configre anondcom to be "allow". When
I connect WS 2012 R2 through WTP, Hyper-v manager on WTP says "Please confirm VMMS server is running".
Is it a bug, or lack of implementation, or restriction of preview edition?
Any suggestion is appreciated! Thanks!

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

Windows Pro 8.1 Hyper-V enabled - cannot connect to Virtual Machines

I'm running Windows Pro 8.1. Virtualization is enabled in BIOS. Account is in Admin, Hyper-V, RDP groups. I open Hyper-V manager. Create a new Virtual Switch (internal) and name it. Then create a new virtual machine - name it, place it in a folder under
C:, Specify Generation (tried both 1 and 2), startup memory 512mb not dynamic, Lan- select the virtual switch created earlier, create an vhdx hard disk, and install the O.S. from an ISO on C. Creates the new VM under Virtual Machines.
I select the new VM, click connect, then start. A window opens with the new VM on server and says it's connecting to it and it's status is Running. In the Hyper-V manager in the New Virtual Machine pane (bottom pane) it shows a image that
appears to have a login screen. The VM window that displays the "Connection to" eventually throws an error : Virtual machine connection: Cannot connect to the virtual machine, Try to connect again. contact your admin, Try again etc. selecting connect
eventually errors out with check integration services etc. I've read the logs, there are no errors. When I try to shut down or turn off the vm it doesn't respond. I've configured this before on different boxes. It's the work environment for the MCSA 70-462
training kit Preparation. any direction would be greatly appreciated.

That is correct. This has been well documented.
The WMI namespace changed. 2008 and 2008 R2 now of the v1 virtualization namespace. 2012 knows of both v1 and v2. And 2012 R2 only knows the v2 virtualization namespace.
That said, there is more to this.
2008 management console only knows 2008 features. So if you connect it to a 2012 server to manage the 2012 server, you cannot manage any of the features released with 2008 R2 nor 2012.
So, take this second point, mix it with the first point and I recommend that your management server / client release matches the release of the Server you are managing.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

CC doesn't recognize that I have an account and signed in

I am signed in, I open photoshop or illustrator and I get the 'continue trial' box. I have CC on two machines- one laptop (Macbook pro) and one desktop (macpro) and on the macbook pro the application manager doesn't recognize that I have paid for the subscription. I have signed out and then signed back in a few times but no help

Illustrator CS6 on Mac OSX Lion. It crashed once when we were trying to save, and once when we tried to reopen a file. When it crashes we reopen it, sign in again (this is when the trail message comes up). It signs in fine, but the file gets corrupted.
Right now I just uninstalled and reinstalled and will see if that helps.

Virtual Machine installs on wrong server

I have install OVM OVS:
Server1 -- Oracle VM Manager
Server2 -- Oracle Virtual Server -- Server Pool Master, Utility Server
Server3 -- Oracle Virtual Server -- Virtual Machine Server
When I create my Virtual Machine (using Oracle VM Manager), it creates the Virtual Machine on Server2 and not on Server1.
Thanks,
Steve

hi Steve,
Server2 -- Oracle Virtual Server -- Server Pool
Master, Utility Serveron this server, paste out the output of this cmd,
/opt/ovs-agent-2.2/db/db_dump.py srv
rgds,
Dyno

Changing adobe ID - Adobe Cloud Manager doesn't work

Hi guys!
I have on my mac Adobe Creative Cloud Manager with all the app installed in English. All work.
I changed my ID with new subscription of all the CC product, but the Manager doesn't recognize what i have installed, so when i try to update, install or uninstall the apps, i can't.
I already try with CC cleaner, but doesn't work...
I already also delete the OOBE folder...
Anyone can help me?

Please refer : http://helpx.adobe.com/creative-suite/kb/troubleshoot-update-issues-cs5-cs5.html#main_Trou bleshoot_Adobe_Application_Manager_problems_or_failures

VMM 2012: How to Configure Automatic Start and Stop Actions for a Virtual Machine?

Does somebody know how to confgure Automatic Start and Stop Actions for a Virtual Machine in VMM 2012?
I miss that option.

Automatic Start or Automatic Restart actions are available for virtual machines running on a Hyper-V cluster from within Virtual Machine Manager.
From within Virtual Machine Manager, bring up the Virtual Machine's properties:
Click "Hardware Configuration"
Click "Availability"
Click "High", "Medium", or "Low" to enable automatic start/restart or
Click "Do not restart automatically" to disable automatic start/restart
Screenshot from VMM 2012 for a VM running in a Server 2012 R2 Hyper-V cluster:
VMs running on a cluster have to be marked "Highly Available" and logically, Microsoft assumes that you'll want these VMs to be running all the time when this setting is selected. If the cluster fails or needs to be restarted, you can set the priority
by which a VM restarts, or you can set the VM to not restart at all when cluster services are restored by using the settings above.

VM Manager doesn't recognize virtual machine

Similar Messages

Maybe you are looking for