VM using cluster shared volume will not run if the CSV is owned by a different node.

If a VM is owned by node "A" and the VHD file is on a CSV that is owned by node "B", it will fail to start. Hyper-v manager popup says that the VHD file is not accessible. If you change the owner of the CSV file to
node "A", it works. This would imply that the node cannot access the files on the CSV it does not own. However, the you can logon to the nodes and all have access to the csv.
This is a Server 2008 R2 cluster. I would appreciate any help in solving this.

Hi Dana,
No you don't need to destroy the cluster.
If you run cluster validation from fail over cluster manager it will allow you to run all checks. It will mention that you have resources that are using some of the CSV but then give you the option to take those cluster resources offline during the test
to check all storage. Or to leave those CSV out of the test depending on which you choose. All other test should be possible with the cluster up and it will NOT need to be destroyed to run them.
Open validation wizard
Select "Run all test (recommended)
On the next window check all storage and then run the checks.
NOTE: This will take all resources offline so if checking CSV with VMs on it would be probably best to shut them down first.
Kind Regards
Michael Coutanche
Blog:Twitter:LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Similar Messages

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

Hyper V hosts with Cluster Shared Volume do not provide Shared VHDX ability

Hi there, i've configured a pair of Hyper V hosts (UCS B230 M2) with SAN-Boot and access to a Shared Fiber Channel LUN.
No matter what I try, when I add a SCSI Adapter and one VHDX virtual disk to a VM, the option for "Advanced" never shows up therefore I can not share the VHDX file between another VM, which prevents any VM based clustering from working (IE: Clustered
SQL server)
Here are the settings I have configured:
The LUN has been formatted with NTFS
The Hyper V hosts have been configured as a Windows Cluster with an IP address and the Fiber Channel LUN configured as a Cluster Shared Volume
I follows the guides below
Create a CSV
https://technet.microsoft.com/en-us/library/dn265980.aspx
Create a shared VHDX
https://technet.microsoft.com/en-us/library/dn282283.aspx
Further details:
Two HyperV server core hosts built
Both joined to AD
Both joined to a Windows failover cluster
One 2TB Fibre Channel LUN presented from an EMC VNX array to both hosts
LUN formatted as NTFS
LUN created as a Cluster Shared Volume
Cluster Shared Volume present on both HyperV hosts
VM created within the Cluster Shared Volume
VM Booted up and Windows 2012 has been installed
VM gracefully shut down
Through the HyperV Manager, going in to VM settings,create a SCSI adapter, create a new VHDX file inside the CSV, the “Advanced” option for the VHDX is not present, therefore the option to make the VHDX file shared is not available
I have followed all steps in the Microsft Technet pages to create a CSV and a VM with Shared VHDX
I’ve cleared all settings and restarted multiple times, but this option is not present

Hi Sir,
>>No matter what I try, when I add a SCSI Adapter and one VHDX virtual disk to a VM, the option for "Advanced" never shows up therefore I can not share the VHDX file between another VM
>>Yes we are using Hyper-V Server 2012 R2
As we know Hyper-v server 2012R2 is a free version without GUI , I'm afraid you are not using Win 8.1 or other windows server 2012R2 to manage that free version hyper-v server .
Shared vhdx is a new feature came with 2012R2 , if use previous windows to manage 2012R2 you will not see "advanced" option (The blue circle belongs 2012 , the red circle belongs to 2012R2 ):
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

The slide show runs in "live mode" but will not run from the browser.

Here is the link to the web page http://www.williamshomesteadranch.com/welldone.html
This is the first time that I've tried to use a widget and it looks good, but will not run fromthe browser.

The answer to the problem is very simple, the main images cannot be found. Please have a look at the following markup starting with line 305 or thereabouts:
      <ul id="ImageSlideShow" title="Jesse the Border Collie">
        <li><a href=Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg src="Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg" title="Jesse"><img src="Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg" alt="photos-1.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg src="Spry-UI-1.7/jackandjesse/jackandjesseonbeach257x381.jpg" title="Jesse and his Friend"><img src="Spry-UI-1.7/jackandjesse/jackandjesseonbeachthumbnail.jpg" alt="photos-2.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg src="Spry-UI-1.7/jackandjesse/jackjessesoccer251x378.jpg" title="Jesse playing soccer with his friend"><img src="Spry-UI-1.7/jackandjesse/jackjessesoccerthumbnail.jpg" alt="photos-3.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg src="Spry-UI-1.7/jackandjesse/jackjesserestbeach365x246.jpg" title="Jesse and his Friend resting"><img src="Spry-UI-1.7/jackandjesse/jackjesserestbeachthumbnail.jpg" alt="photos-4.jpg" /></a></li>
        <li><a href=Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg src="Spry-UI-1.7/jackandjesse/jackjessedwnbeach250x350.jpg" title="A Walk down the Beach"><img src="Spry-UI-1.7/jackandjesse/jackjessedwnbeachthumbnail.jpg" alt="photos-5.jpg" /></a></li>
      </ul>
Now take a closer look at the first image.
The thumbnail is jacksjessethumbnail.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjessethumbnail.jpg. Bless me, the thumnail is there. No problem here.
The main image is jacksjesse251x270.jpg and, according to the markup, can be found at http://www.williamshomesteadranch.com/Spry-UI-1.7/jackandjesse/jacksjesse251x270.jpg. Lo and behold, the image cannot be found. The problem must be here.
We can do the same analysis for each of the remaining images with the same result. This means that the main images have not been uploaded to the correct folder or that the path to the main image is incorrect.
Assuming that the path to the main image is correct, using DW, have a look in your local folder as follows
Then 1. single left click on the jackandjesse folder to highlight it, 2. click on the symchronise button, 3. make sure you have the correct selections in the Synchronize Files dialog and click on preview.
Then click on OK as per
and the files should be uploaded to the correct remote folder.
Gramps

My ipod syncs and is fully charged but will not run tried the reset still comes up with the language screen Any ideas how to fix?

How to fix my nano so I can use

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

I am trying to play music and videos but the volume will not show on the screen unless i have head phones in also the buttons on the side will not change my ringtone volume

i am trying to play music and videos but will not see the volume control unless i have head phones in also phone will not move off silent mode and wont turn up with the volume buttons

its not showing the headphone sign its showing ringer when i press the button but no volume i have tryed to restore it but didnot work

Macbook Pro will not boot on external Firewire drive. Mybook with 2 partitions containing 2 OSX images using CCC. Volumes will not display when booting but do display when the internal drive is running OSX using Startup utility.

I've reset SMC and PRAM several times. Activiatng Terminal from Recovery HD displays the following:
-bash-3.2# diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *250.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *1.3 GB     disk1
   1:        Apple_partition_map                         30.7 KB    disk1s1
   2:                  Apple_HFS Mac OS X Base System    1.3 GB     disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 TB     disk2
   1:                        EFI                         209.7 MB   disk2s1
   2:                  Apple_HFS MyBook1                 999.8 GB   disk2s2
   3:                  Apple_HFS MyBook2                 767.2 GB   disk2s3
Any comments are greatly appreciated.

Applejack is just a command-line "front-end" for a number of different command-line tools you can use in single-user mode, and I'm not sure whether it's Lion-compatible. You can always try booting into single-user mode and executing:
/sbin/fsck -fy
That's unlikely to solve your problems, though. Since you can't boot from two different hard drives and your optical drive, that indicates there's a more serious hardware issue, or multiple hardware issues.

Windows 7, 64 bit, dowloaded the itunes 10 upgrade. Everything looked fine, seemed to install perfectly. But it will not run. The program opens, and within 2-3 seconds an error message pops up, "iTunes has stopped working." tried reinstall. No luck.

Read other posts and answers about codecs. But When I followed the Apple Support procedures for reinstall I first uninstalled all Apple software from the PC including QuickTime, and have not reinstalled QuickTime.
Any help will be much appreciated!

Hi sahgin,
The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

After years of using firefox, it suddenly will not connect to the internet. Internet Explorer connects with no problem.

I'm using a WIFI connection and have had no problem for many months. All of a sudden, I get "Problem loading page"; "Firefox cannot establish a connection with the server". MS Internet Explorer works fine.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites

HiQ will not run as a user on win2k pr sp2.

HiQ runs fine as a poweruser or administrator, however I have lab where students use it and it will not run if you are a standard user.
I have windows 2000 pro SP2.
Thanks,
bb

Have you tried giving the user administrative privileges?

Battery shows as having charge in System Profiler yet will not run from bat

My MacBook is about a year and half old. My battery just started doing this a few days ago. It shows as not charging. Checking the battery shows that it has 85% power left (this was 86% the day it started). The magsafe connector stays green. The MacBook will not run without the power connected.
I am not sure if this is an issue with the battery, the batteries connector, or with my MacBook. I'm pretty tight fro cash right now and need my MacBook working. I don't have money to throw at parts I don't need. If anyone has experienced this issue before and has any insight please let me know. I'm a starving web programmer and I need to be able to bring my MacBook with me to meet with clients.
Thanks,
Steven
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3738-3b2a
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 4211
Fully charged: No
Charging: No
Full charge capacity (mAh): 4939
Health Information:
Cycle count: 232
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12158
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: No

Do you think it is software. It will not even boot when the power is not connected. I was thinking it was a problems with ACPI in the EFI BIOS. The strange thing is just a moment ago the magsafe went orange and the power states calculating. This is the first time I've seen the magsafe orange since this started four days ago. I came back to this thread to update it with this little tidbit and saw your reply.
This is my current power information from system profiler:
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3738-3b2a
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 4199
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 4939
Health Information:
Cycle count: 232
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12148
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 20
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
Charging: Yes

Adobe CS will not run, stops half-way

I used Adobe CS for many years and now suddenly it will not run. The answer I get is: Photoshop not responding.
Any suggestions?

We cannot know. We need system info. Also trash the PS prefs. if they got currupted, there may be issues.
Mylenium

PB will not run on battery-RePost

Sorry, but I posted this under the battery and power section w/o a response.
A coworkers 12" PB will not run off the battery. As soon as she removes the power cord it shuts off. New working battery was purchased and used.
Any ideas?
Thanks

There are 3 components to the charging circuit: The power adapter, the battery, and the logic board (and within that the dc-in card).
When the battery is installed, what does it say about it in the system profiler (click blue apple, about this mac, more info, power)? What's the fully charged vs current capacity? Even though it's new, how many cycles are on the battery? When you push the button on the battery, how many lights light up?
You might have the person try resetting the power management unit (PMU), following directions at http://docs.info.apple.com/article.html?artnum=14449
If you know for a fact the power adapter is working, and that the battery is fully charged, then it's either a dc-in card problem (this is the card which has the plug the power adapter plugs into) or a logic board issue.

Powerbook G4 Will not run off power adapter

Hi,
My powerbook G4 starts up and runs fine from the battery but will not run when the battery runs down even though the power adapter is plugged in.
The ASP shows that the adapter is plugged in but not charging.
I have tried three different power adapters, has anyone got any ideas?
Steve

Did yu notice this behaviour immediate after a software update? it appears you aren't the only one with charging issues. I don't know of any solution so you may want to search through these forums to see if anyone did find a fix for this problem.

VM using cluster shared volume will not run if the CSV is owned by a different node.

Similar Messages

Maybe you are looking for