VMI: Reduce Stock in transit - what is the right method?

Hi Gurus,
We are using APO/SCM system to implement VMI functionality to replenish stock at customer location. We need to build stock in transit at customer location after PGI happens in ECC.
Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
SAP recommends following four methods to reduce:
http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
1. Goods receipt information is not sent from the customer to the vendor
2. The open purchase order quantity is sent from the customer to the vendor
3. A proof of delivery is sent from the customer
4. The stock in transit quantity is sent from the customer to the vendor
Out of these 1 and 2 methods are feasible in our scenario.
Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
Thanks in advance,
Niranjan

hey
I don't think this is related to XI.
Please post it in correct forum
https://forums.sdn.sap.com/index.jspa?categoryID=1
Thanks
Aamir

Similar Messages

VMI and reduce Stock in Transit - what are the right methods?

Hi Gurus,
We are using APO system to implement VMI functionality to replenish stock at customer location. We need to build stock in transit at customer location after PGI happens in ECC.
Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
SAP recommends following four methods to reduce:
http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
1. Goods receipt information is not sent from the customer to the vendor
2. The open purchase order quantity is sent from the customer to the vendor
3. A proof of delivery is sent from the customer
4. The stock in transit quantity is sent from the customer to the vendor
Out of these 1 and 2 methods are feasible in our scenario.
Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
Thanks in advance,
Niranjan

Dear Niranjan,
I have implemented SCM-APO VMI using Past Releases of SCM (version 4.1) for upto 300 Customer Sites & 500-1000 Products.
In my experience ... this is a Big Custom Development using EDI - IDOCs / ALE wherein you Receive from Customer the Data either as "Open Orders" or "Goods Receipt" of VMI Order at Customer Store or "In-transits" as they view it. There is a Facility to receive them in the PROACT IDOC but you have to write IDOC FUnction Modules to post the Data to the
VMI Planning Area as well as at Product-Location you have to Daily Delete the In-transit Order (Category EI or AH for ASN) and Upload Intransit Quantity directly into Live-Cache as a Order. The Development is also complex as you need to Map the VMI Customer Product to the Vendor/Manufacturer's Product COdes in SCM-APO.
I have experience implementing VMI like this several years ago ... and I am not sure if SAP SCM-APO built anything Standard for the Interface over the years. If you are not sure get a ALE/IDOC & ABAP Consultant or XI Consultant to work with you on the Project.
You can Delete In-transit Quantities by using RLCDEL Transaction for Category EI or AH (if ASNs are used). You need a IDOC/ALE Development to Calculate and Upload In-Transits and Update into the VMI Planning Area as well as Download to a FILE which you can use via another ABAP Development to Upload In-transits at the Product-Location (Customer) in SCM-APO.
Hope this helps.
Regards,
Ambrish Mathur

VMI: reduce Stock in transit - what is the correct method?

Hi Gurus,
We are using APO/SCM system to implement VMI functionality to replenish stock at customer location. We need to build stock in transit at customer location after PGI happens in ECC.
Now, stock in transit is show up in 'Stock in transit' key figure, but the question is how to reduce stock in transit once it is received at customer location.
SAP recommends following four methods to reduce:
http://help.sap.com/saphelp_scm2007/helpdata/en/f1/f69a3dcbcfac53e10000000a114084/frameset.htm
1. Goods receipt information is not sent from the customer to the vendor
2. The open purchase order quantity is sent from the customer to the vendor
3. A proof of delivery is sent from the customer
4. The stock in transit quantity is sent from the customer to the vendor
Out of these 1 and 2 methods are feasible in our scenario.
Please share your experience if you have used any of these methods, I want to hear from someone who implemented any of these methods before deciding on a method.
Thanks in advance,
Niranjan

After research and testing I found second method looks good to me. I tested in our test system, this works pretty much they way it is described in the help (link in above message) . The issue is resolved.

VMI - what is the right planning book?

Hi Gurus,
We are implementing VMI, My question is what is the right Planning area/Planning book.
I understand there is standard Planning area/book 9AVMI03 and 9AVMI(1) exists specifially for VMI. What are advantages using 9AVMI03 instead of standard 9ASNP02 ? If I am creating a new planning area should I copy VMI or Standard Planning area.
Please share your experiance.
Thanks,
Niranjan

Hi Niranjan,
Your point and question is very valid. But if you see, VMI is subset under SNP. So, 9ASNP02 is the master planning area which contains all key figures relevant to SNP which is inclusive of VMI key figures.
If you use planning area for VMI, all relevant key figures for VMI will be designed under this which will avoid complexities at later stage.
But there is no harm in using 9ASNP02 as well.
Hope your query is clarified. Please confirm
Regards
R. Senthil Mareeswaran.

What is the right way to connect the adapter to my macbook when charging?

what is the right way to connect the adapter to my macbook when charging.
is it connect the magsafe connector first before plugging the adapter to the outlet? or the way around? or both ways will do?
what if i'm using a surge protection with a on/off button, can I just turn the surge protector extension on and off without disconnecting the magsafe connector and adapter plug from my laptop when i'm not using it?
thank you very much

If there is any arcing it may be because the adapter is dirty. It is best to plug in the wall wart then attach the magsafe to the MacBook. As GfulDedFan mentioned this reduces the chance of power surging the MacBook. I have done mine this way since he day I bought it and have never had an arc. I keep it clean to reduce the chance of this happening. The following will help in the care of your supply.
Apple: Use and cleaning of MagSafe power connector

What is the right process for moving system to another plant

Dear Guru,
I have below scenario which i would like to understand what should be the right process to deal with it..
Organization Structure.
Company code: C500
Business area : 500A
Plant A500 and S500 which is under the same company code and same Business area.
Storage location: SW01 and AW01 which are physically same location address
I have this scenario where the user have a PO under Plant S500 which already GR and IR and the physical goods is currently placed in Storage location SW01.
But the user realized the Material should be created under Plant A500.
For the above case, can anyone please advice me what should be the better process instead of reversal the IV/GR/PO? and what is the right process for MM and considering also from the finance point of view?
Thank you very much,
Regards,
CheeWee

Hi
It is the configuration issue. SOmetime it happens when you copy the Reference plant to your Plant.
Change the setting and make it both Qty & Value if you really want to manage the stock qty with value then proceed.
Valuation area is nothing but a Plant.
karthik
Edited by: Karthik on Jul 25, 2011 1:23 PM

What is the right charger for a MacBook Pro 13" mid 2009 model?

What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger. A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
All help much appreciated. THANK YOU

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

What are the avlble methods to Measure Quality of Customer Service in SAP

Hi
We are in Retail business, and I would like to know what are the available methods to measure the Quality of Customer service in SAP CRM. Help us to get the required information?
Best regards

Venkat,
there are two aspects to this :
1. The overall philosophy ( for want of a better word ) of QOS for any service - there is a lot of thought that has gone into measuring QOS for a service - hence I would say that QOS is more related to the specific service than the entire domain.
2. Measuring the quality of service in terms of what ? - there are a lot of KPIs for the same some of them could be :
Average time taken to service a customer
Does the customer get all that they want in the store or only some of the items ( partial fill)
Are the products neatly arranged and easy to access
average time taken for the customer to get what h/she needs
customer facilities like parking / childern play area etc
Availability of attendants / helpers for the customer
home delivery
credit options... etc etc and the list could go on endlessly ... as you can see it is very specific to the service being provided and accordingly you will get KPIs for the same.
As for measauring the same - there are umpteen ways to do the samedepending on the place it gets recorded - you can have surveys / web surveys / POS details etc etc - what is it that you are looking for specifically ?
Arun
Hope it helps....
Message was edited by:
Arun Varadarajan

What are the different methods to find the user-exit for any requirement?

Hi Everybody,
What are the different methods to follow to find the user-exit for any requirement?
Thanks & Regards,
Nagaraju Maddi

The following program search all the user exits involved with a T-code:
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP® User Exits exists.
*& Tables
TABLES : tstc,     "SAP® Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP® Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP® Modifications
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

What are the right names for the 2 OHS?

Hi,
Currently we have 2 options for an HTTP Web Server for APEX:
- An Oracle HTTP Server (OHS) from the database companion CD.
- An Oracle HTTP Server (OHS) from the Oracle Application Server.
The first OHS is based on Apache 1.3.x and the second on Apache 2.0.x.
What are the right way to reference them so people know what your are talking about? In the manuals they are just called OHS but since they are not the same I would like to distinguish them some way. What do you call them?
Regards Pete

OK now I think got it:
OHS from the database companion CD and from the Application Server are both based on an Apache 1.3.x HTTP server.
On the Oracle Application Server companion CD is an OHS based on an Apache 2.0.x HTTP server. This release does not contain the mod_plsql module an can therefor not be used for APEX.
Regards Pete

What's the right way to delete an entire backup ?

I've had two Macs doing wireless Time Machine backups to one Time Capsule.
Question: I got rid of one Mac, and want to delete its backup entirely (but leave the other computer's backups untouched). What's the right way to do it?

Bob Timmons wrote:
Jespes, welcome to the discussions!
Open your hard drive. Your Time Capsule icon should appear under the SHARED heading.
Click on the Time Capsule and a folder will appear to the right.
Double click the folder and you should see a xxxxxx.sparsebundle file for each computer that has been backing up.
Click on the xxxxx.sparsebundle file that you want to delete to highlight it and then click the gear shaped icon just above. Select Move to Trash. (Do not drag the file to the Trash as this will not work).
Be careful, as the file will be deleted instantly and you will not be able to retrieve it.
many thanks!

What is the right way to move a directory to another drive?

When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.

Bazsl wrote:
When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.
That's something I just did successfully one hour ago...
I suppose your are in the 'folder' view with full folder tree, not in the 'My folder' view which only shows the lower subfolder level recorded in the database.
Do you try to move a folder with its subfolders ?

What's the right way to add a swipe handler to a DataGrid?

H All:
What’s the right way to add a swipe handler to a DataGrid?
(Target = Android, AIR using Flash IDE)
Adding a handler to the DataGrid works; but (as expected) it only works on the datagrid itself. Like if you swipe on the background before rows are fully added. Adding columns over the datagrid, prevents the datagrids’ swipe handler from firing.
Trying to add a swipe hander to the columns themselves, results in the below error.
// Below code fails with
// 1061: Call to a possibly undefined method addEventListener through a reference with static type
//   fl.controls.dataGridClasses:DataGridColumn. So ... DataGridColumn doesn’t support addEventListener...
There must be a better way(?).
Thanks
            import fl.controls.DataGrid;
            import fl.controls.dataGridClasses.DataGridColumn;
           // Works, but only on the grid itself; as when the rows do not fill the space tor the datagrid.
            myDataGrid.addEventListener (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);
            var c1:DataGridColumn = new DataGridColumn("Notes");
            c1.width = 90;
            c1.cellRenderer = CenterAlignCell;
            c1.addEventListener (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);

Adobe list of properties and methods:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/controls/dataGridCla sses/DataGridColumn.html

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

I'm moving to an imac from a PC. I want to move my itunes library from the PC to my new imac. What is the best method and where can I find instructions?

Move iTunes from PC to MAC, http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

VMI: Reduce Stock in transit - what is the right method?

Similar Messages

Maybe you are looking for