VMM 2013 R2 Manager - Remote Control issue

Hello Everyone,
Looks like Im having a remote control to the VMM server issue. Everytime I try to connect to console of the VM machine, I get this error:
"An authentication error has occurred Code: 0x80004005" Remote computer: servername.mydomain.com"
The VMM server has been added to our domain and I'm logged in as the Domain Admin. Is there a permissions group I might be missing or is it something else?
Please Let me know
Thank you
Devon

The 'first' VMM administrator is the domain user account of the logged on user that installed VMM.
If the domain admin performed the install of VMM, then they would be the first administrator by default. If someone else did, than that user is the first administrator and they have to add the domain admin as an SCVMM administrator within SCVMM.
Also, you cannot move an SCVMM server from one domain to another. You will end up with broken security. You have to re-install SCVMM.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Similar Messages

Configuration Manager Remote Control: rc.exe - Entry Point Not Found

It appears this may have been caused by a patch since it happened after our systems were patched, but I can't be sure. This issue was reported before on SCCM servers that had KB2830477 installed. In some cases removing it works, but not in all
cases.
To create this error, we right-click a computer in a collection in the SCCM admin console on one of the SCCM servers, we get the message "Configuration Manager Remote Control: rc.exe - Entry Point Not Found" with the text "The procedure entry
point PdhAddEnglishCounterW could not be located in the dynamic link library pdh.dll." If the SCCM admin console is installed on a workstation, this can be used to start Remote Tools without a problem. This is only on Windows 2008 R2 servers
running the SCCM Admin console.

Does this continue to occur if you reinstall the console?
Does the console match the version of the ConfigMgr site?
Have you reviewed your AV logs to see if it might be getting in the way?
Have you used procmon to potentially identify issues with locating the the DLL?
Does this happen when folks are launching the admin console while directly RDPed into the server or when the console is served up using RemoteApp (given that's what the mentioned hotfix is for)?
Jason | http://blog.configmgrftw.com

Windows server remote management / remote control agent

I have installed ZFS 6.5. I have installed the agent on an windows server
I have the consoleone snapins installed but there is no option to remote
control in consoleone on the server object. The server does not show any
sign of Zen remote control. Does the agent install include remote control
agent? If not, were is the install located and how do you configure it?
Also when getting packages what is the difference between ZFS 3.0 and the
version that comes with Zfs 6.5?

Corey,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Audigy 2 NX Remote Control Issues

I am unable to use the remote control bundled with the Audigy 2 NX for anything but (un)muting and changing the volume. Obviously the remote is sending the signal and the box is receiving it. I've installed the latest version of Creative MediaSource 3 and the remote control manager:
CMS_PCAPP_LB_3_30_2.exe
CMS_RMT_PCAPP_LB_2_30_02.exe
I have made sure that "Enable Creative MediaSource Remote Control" is enabled and that I have selected the proper remote model, "Creative RM-500," in the Remote Control & OSD Settings menu. Howerver, under "Select this as the remote control receiver:" there are no devices available. Yet the Audigy 2 NX is plugged in and functioning. It shows up as my acti've sound output device and I am able to play sound through it.
Any suggestions
I'm running Window's Vista 32bit with 4 GB of RAM and an Intel Core2 Duo T9400 at 2.53GHz.
Thanks!

I have a small problem of my own.
I have a setup like Laptop---> Audigy 2NX -----> Analog 7. spkr system on Windows Vista 32 bit.
I am having a hell of a time in getting the SPDIF to work.
Do you know how to get sound from the SPDIF?
I thought the new drivers I installed? would solve the problem. But with them, the SPDIF I/O controls are greyed out and there is no sound through the speakers when I set SPDIF as default speakers.
Hi ppkumar,
So do you mean that when you set SPDIF as default speakers, you do not get any sound through the analog 7. speakers system that is connected to the Audigy 2 NX? Is there any sound from the SPDIF? When default is set to SPEAKERS instead of SPDIF, does your analog 7. speakers work correctly?
If you get sound from your SPDIF but not your analog 7. speakers when default is set to SPDIF, and sound from your analog 7. speakers but not the spdif when SPEAKER is default, then I would think the Audigy 2 NX is behaving correctly since that would be what I would expect.

ZCM 11.2.3 Remote Control Issue

I have zcm 11.2.3 MU1 installed.. I just imaged a few windows 7 64 bit computers ... installed agent and novell client.. all seems to work just fine with them (ie policies, inventory etc) BUT I cannot remote control them..I Get a failed to connect to server when I try to remote control (both Ip address and DNS name).. I turned off the firewall and that made no difference.. anyone tell me where to look for logs to see why it is failing on these computers ??.. I can remote control other computers no problem

Originally Posted by roehmdo
thanks - the remote policy if definitely applied to these workstations... looking at the tid,, would these logs exist on the workstation or the server ?
It's all in the TID
Component Name: Remote Management
Enable Debugging:
Device being remoted:
Set agent logging to debug and above with zicon.
Stop “Novell ZENworks Remote Management powered by VNC” service either using cmd or services.msc
Windows workstation set:
Location: HKLM\Software\Novell\ZENworks\Remote Management\Agent
****Location: 10.3 and later: HKLM\Software\Novell\ZCM\Remote Management\Agent
Name: DebugMode
Type: DWORD
Data: 2
Location: HKLM\Software\Novell\ZENworks\Remote Management\Agent
****Location: 10.3 and later: HKLM\Software\Novell\ZCM\Remote Management\Agent
Name: DebugLevel
Type: DWORD
Data: decimal value 10 or hex value ' a'
Location for x64 Windows 7:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Novell\ZCM \Remote Management\Agent
After the above registry changes, Restart “Novell ZENworks Remote Management powered by VNC” service either using cmd or services.msc
Device running the browser performing Remote Management:
In the Remote Management Dialog box, select "More Options" and check "Enable logging"
Log Locations:
Device being remoted:
Windows workstation:
%ZENWORKS_HOME%\logs\WinVnc.log
%ZENWORKS_HOME% \logs\LocalStore\zmd-messages.log
Windows Vista workstation:
%ZENWORKS_HOME%\logs\WinVncApp.log %ZENWORKS_HOME%\logs\WinVnc.log
%ZENWORKS_HOME% \logs\LocalStore\zmd-messages.log
Device running the browser performing Remote Management:
novell-zenworks-vncviewer.txt
location:
Internet Explorer 7 on W2003 or XP: Current user's desktop
Internet Explorer 7 on Vista: last directory browsed from IE 7
Firefox: Firefox directory, for example, C:\Program Files\Mozilla Firefox
From the server used for ZCC to RM:
loader-messages.log
services-messages.log
zcc.log
Thomas

Remote control issue with only some users

I'm having an issue that I can't seem to find any reference to anywhere.
Our client has two servers. One is Server 2003 and is running AD, the other is 2008R2 and is running terminal services.
When I create a new user in AD, if I set the option in AD to allow remote control, do not require permission and interact and I set these options before the first time the user logs into the terminal then I can remote control that user's session without
a problem.
However, if I leave the defaults in AD to allow remote control but require the user's permission and the user logs into the terminal the first time with permissions set like that then forever more I can never remote into that user's sessions. Changing the
options in AD later to not require user's permission no longer helps. When I try to remote into that user's session the user does not get a pop-up requesting permission, rather I just get an Access Denied message. If I try to shadow via an elevated command
prompt I get error 317. I haven't been able to find any differences in GP or the registry between users that I can shadow and those I can't. Some setting specific to each user is getting set on first login that can't seem to be undone by changing the settings
in AD. Where might I find this?
Thanks!

Hi,
Thank you for posting in Windows Server Forum.
Please check that you have added user under “Remote Desktop User” local group. In addition they are
added under GPO setting “Allow logon through Remote Desktop Services” and
not added under “Deny logon through Remote Desktop Services”.
You can check the setting under below mention path.
GPO_name\Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment
More information:
Allow log on through Remote Desktop Services
http://technet.microsoft.com/en-us/library/dn221985.aspx
In addition please check that you are not limiting in number of users who can connect simultaneously and also verify Remote Desktop Services Logon rights. Please check beneath article for additional details.
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176
Hope it helps!
Thanks,
Dharmesh

Solution manager Remote Connection issues

Hi
I'm currently in the process of setting up Solution Manager 7.1 on windows Server 2008r2 using central system.
I did the prerequisite check & the Solman installation and i'm actuallly working on the post-installation steps.
I'm experiencing difficulty with the step : "Configure Remote Connection to SAP".
I followed the informations provided on :   http://service.sap.com/remoteconnection
In the technical prerequesite you have to set up a connection to sap support.
So i have to choose a connection type : I selected Internet connection so my first question is : do we need "VPN with SNC" or "VPN OR SNC" ?
I personnaly understood VPN or SNC.
So from here i decided to use SNC.
The first step was to set up & configure the SAProuter. I decided to do it on an another computer on the same domain ( not on the same computer where Solution Manager is installed ) but i'm not sure it is necesary
I assume I can install Saprouter on the same location as the Solution manager? do you recommend it ?
The Basic Functions testing with niping is working.
The next step is : "establish Internet Connections"
So now i can choose between SNC or VPN : my goal is to establish the connection as fast as possible.
I actually don't have a switch available ( i can get one if necesary but time is running ... ) so i'm opting for the SNC solution.
I tryed to get the certificate for the saprouter but i don't have a register SAProuter, but when i opened a customer messager for component XX-SER-NET, SAP answered about the impossibility to access SAP service Backbone with an SNC , saying that i will need to register a VPN site to site connection to SAP => i don't get it .... Can someone explain it to me ?
So please can one of you guru's tell me how to set this remote connection :
-which materials ( server / switch / firewalls ) ?
-where to get the right documentation ?
-What about DMZ ?
-I have a single IP Address is that enough ? ( setting up nat for port 3299 )
- do i have to contact a service provider ?
My idea was initially to set up the SAProuter on the same computer as the SOLMAN setup & use SNC communication to communicate with SAP but it doesn't seems that easy. Do i need separate installation for Saprouter <=> Solution Manager. ?
What's the minimal infrastructure to establish this connection ?
In addition to that, after configuring the SAProuter, i had trouble with the SAPMMC : on my system , on the instance 0 , the process disp+work.EXE won't run ( yellow light )and i can't find where i made a mistake if you have suggestions ...
Really need your help, i'm on a short deadline ... Any help, even incomplete, would be appreciated.
Thanks a lot.

Thx for the answer.
I actually managed to register my saprouter with SAP and was granted with CN/OU & connection informations.
I followed this guide : http://service.sap.com/saprouter-sncdoc with the addition of this guide : http://wiki.sdn.sap.com/wiki/display/Basis/SAProuterviaSNC.
My first issue : I'm running with a Windows server 2008 r2 enterprise edition 64 bits with a processor Intel Xeon 2.4ghz ( dualcore). so i decided to use the crypto folder "nt-x86_64"
For the environment variable i set as System variables SECUDIR = C:\usr\sap\saprouter and SNC_LIB = C:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
The generation/install of the certificate is alright ( sapgenpse get_my_name -v -n Issuer is OK )
using the command :saprouter -r -K "p:CN=mycn, OU=myOUnbr, OU=SAProuter, O=SAP, C=DE" i have
I get the following message : trc file     dev_rout
                                                no ligging active
Its strange cause it looks like its running but when i check the services running on windows saprouter isn't started .... How to know if SAProuter is running right ?
If i folow the SAP procedure : Step 3 : test of the ip connection by the customer : SAP Remote Services : technical preparation ( see SAP Note 812386 ) : it's ask in the note to implement note 766505 via SNOTE : i get the following error msg : Error in remote connection to destination SAPOSS : Error when opening an RFC connection ( LB: Hostname or service of the message server unknown#DEST = SA
What's wrong ?
If i use T oss1 in parameter => technical setting => i set my saprouter info in SAProuter 1 ( at customer site ) with instance no. 99 and if SAProuter and SAPNet Message Server at SAP i put the following : Name : sapserv2 / IP Address 194.39.131.34 intance no. 99 and message server name oss001/ DB Name 001/ Instance no.01.
When trying to "Logon to SAPNet" i have an error Unable to connect to SAPNet message server ( default connection will be used ... )
and followed by the error screen : "partner '80.15.173.168:sapdp99' not reached WSAECONNREFUSED : Connection refused. do you want to see the detailed error description ? "
Details : module nixxi.cpp / line 3286 / Method : NipConnect2:80.15.173.168:3299 / Return code : -10 / System call : connect / Error No : 10061 / Error Text WSAECONNREFUSED: Connection refused / Counter : 10
Any idea ?
when doing niping.exe -c -H /H/mylocalSR/H/194.39.131.34/H/194/39.131.34 i obtain :
Wed Dec 07 21:20:09 2011
connect to server o.k
Wed Dec 07 21:20:09 2011
send and receive 10 messages (len 1000)
times -
avg   122.148 ms
max   193.731 ms
min   81.564 ms
tr 15.990 kB/s
excluding max and min :
av2   118.273 ms
tr2   16.514 kB/s
Is it the expected output ?
I've maintained system data in service.sap.com/system-data ( selecting the sap router ) then i tryed to use the SAP service connection, downloaded the .exe but i can't find the stfk.oez. I realized that in my maintain connection screen i have no space for entering any routestring. Seems wrong ?
Do i have to use the SAO?
i've made nat redirection from my router as this : from my public ip to my lan ip ( 192.168.x.x) what should i enter in the routestring : /H/public or lan or hostname ?/S/3299 ?
Hoping you can help me ! ( the goal of all this is to set up RFC connection for postinst step of Solution manager ).
Edited by: BLANCHARD Guillaume on Dec 7, 2011 10:47 PM

Import Manager Remote Key issue

Dear All,
I have imported all the records from R3 system in Material repository. Since the full MATMAS xmls were of bigger size I devided it into 5 ports MARA, MARC, MARM, MVKE, MBEW.
Now while importing MARA, remote key was not mapped by mistake.
But we want local Material numbers (i.e. material numbers from R3).
so now do i need to reimport everything again or is there any workaround to it.
-Poonam

Hi Poonam,
In lines with what nitin has said
I feel is the right way to go about with the scenario when you have to deal with remote sytems and remote keys.
To explain:
When ever you are importing data from an external system you need to maintain a remote key which will identify that these set of records are coming from a differnt remote system.
For this we use Remote sytem mapping.
The unique key of the incoming source file is to be mapped with the remote key in the destination side in Import manger.
This remote key will then act as your primary key and can be used in the matching field tab.
The unique key then can be cloned to map it with its correcponding field in the MDM rep.
Eg Material no -> Remote key
Material no(cloned) -> Material no
Then when you syndicate these field you need to do proper mapping in the syndicator for the remote sytem and then on your local id will be store in the value field and global id in the remote key field
Hope it helped
Kindly reward points if found useful
Thanks
Simona

Apple TV Remote COntrol Issues....

Our Apple TV remote stopped working after a few months of use...
We replaced the battery, but it still does NOT work.
Wondering if there is anyway to troubleshoot the remote itself?
Hopefully we are not out another $20 for the replacement - haven't used it that much!
Thanks in advance for any guidance.
VR,
The Ryans

Welcome to the Apple Community.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Remote Control and Firewall WinXP SP2

Does any of you guys know how to prepare WindowsXP SP2 release which would
enable firewall settings when installed?
What is the most efficient way to handle this? I am just trying to prepare
the remote control issue before SP2 is released.
Thanks in advance for your input.
Jeff

hi,
you can open port that is need for ZENworksPORT UDP : 17611762 TCP:
21, 517,1763.
I can remote management a workstation that is a windows xp with sp2 now.
"Michael Rhoadarmer" <[email protected]> дʼ
news:Tnntc.920$[email protected]..
> 1761 1762 1763
>
> >>> Michael Rhoadarmer<[email protected]> 05/27/2004
9:58:35 AM >>>
> We open up 1761,3, & 3 TCP and use [localhost] for the field for computer
host. (inclued the brackets)
>
> >>> JS<[email protected]> 05/21/2004 4:18:35 PM >>>
> Does any of you guys know how to prepare WindowsXP SP2 release which would
> enable firewall settings when installed?
> What is the most efficient way to handle this? I am just trying to prepare
> the remote control issue before SP2 is released.
>
> Thanks in advance for your input.
>
> Jeff
>
>
>
>
>
>

Remote Control and error 1456

We are having a Remote control issue with more and more PC's. If they are
logged in, we can remote control them. If they have bee restarted and are
waiting to log in, then we can not remote control them. We Can use
diagnostics on them though....
Zen 4.01 ir7 is where we are.
We are also having an issue where many times after imaging, the ISD is not
populated into windows, and gets associated with our Image PC's workstation
object. If we clear the ISD, delete both workstation objects, and reboot the
target PC, it does re-import correctly. The remote control issue does not
get fixed when this happens though....
I have seen that rmerrorlog.txt has been asked for in the past to help solve
this issue, so We are including that. Any help in resolving what we have set
wrong is appreciated.
Thanks,
Mark Waters, CNA
John Evans, MCNE
Systems Group
Housing and Food Services
Michigan State University
watersmd at mail dot hfs dot msu dot edu
1st attempt to remote control target PC was not Logged in. It Failed - Error
1456.
2nd attempt was when target PC was logged in. It Worked.
PC with ConsoleOne - A004686
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
returning -201
#(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
#(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
Trying to load the resource DLL from Nls\ENGLISH directory
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
successfully
#(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
LoadandParseCommand
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
Successfull!!!
#(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
Successful!!!
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
#(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out WallPaperRequest
#(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
Startreceiving event
#(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread : Received
Startreceiving Event
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
Command
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of did->DrishtiType
sent to Agent is 1
#(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
Packet succesfully
#(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
reallocation
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
event
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
ReceiveData(For Header) is -1
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of StartReceiveThread
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
HandleRCSession
#(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
#(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
Target PC - A003514
#(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'A003514.Workstations.UHsg.HFS'
#(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
operations disabled.
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 0, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
A003514.Workstations.UHsg.HFS, treename - HFS
#(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
authenticated...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
failed...
#(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
initializeContext() failed for master 1, tree:HFS
#(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for master replica returned : -201
#(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
server
#(768)# 11:45:47 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
#(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenLite.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
Successfully loaded ZenAutil.dll and its dependent DLLs
#(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
policies...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading boolean
attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
user:, tree:HFS
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
'z_Global Workstation Package:General:Remote Control
Policy.WorkstationPackages.Workstations.UHsg.HFS'
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
#(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
active...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading policies
#(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
name...
#(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
#(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
context
#(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
authentication for nearest replica returned : 0
#(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
#(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
unloaded ZenAutil.dll
#(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
over...
#(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
#(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
successfully
#(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed RcAgent.DLL's
Init Proc Address
#(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
#(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
#(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
#(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
#(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote Control
session for P1.
#(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
#(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
#(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
#(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
#(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
ESC_START_VIEWING_DARPAN Successful
#(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
#(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
#(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
#(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
returned. Closed thread is = 1
#(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
#(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
session is set
#(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in send
thread
#(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window. Calling
CloseConnection().
#(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
#(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
#(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
#(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
#(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
#(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
#(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
hAcceptThread Signals
#(768)# 11:47:12 AM 02/13/07 Critical :
RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
successfully unloaded from memory
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory ...
#(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not unloaded
from memory and it is forcefully unloaded...
#(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
#(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin

Delete a few test workstation objects. Delete the object that was created by
the Image PC. Run DSREPAIR. Disable windows firewall. Reboot the PCs. Check
if the Workstation objects are created and if you can remotely control
them.
"Mark Waters" <[email protected]> wrote in message
news:[email protected]...
> We are having a Remote control issue with more and more PC's. If they are
> logged in, we can remote control them. If they have bee restarted and are
> waiting to log in, then we can not remote control them. We Can use
> diagnostics on them though....
> Zen 4.01 ir7 is where we are.
> We are also having an issue where many times after imaging, the ISD is not
> populated into windows, and gets associated with our Image PC's
> workstation
> object. If we clear the ISD, delete both workstation objects, and reboot
> the
> target PC, it does re-import correctly. The remote control issue does not
> get fixed when this happens though....
> I have seen that rmerrorlog.txt has been asked for in the past to help
> solve
> this issue, so We are including that. Any help in resolving what we have
> set
> wrong is appreciated.
>
> Thanks,
> Mark Waters, CNA
> John Evans, MCNE
> Systems Group
> Housing and Food Services
> Michigan State University
> watersmd at mail dot hfs dot msu dot edu
>
>
> 1st attempt to remote control target PC was not Logged in. It Failed -
> Error
> 1456.
> 2nd attempt was when target PC was logged in. It Worked.
>
>
> PC with ConsoleOne - A004686
>
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:45:46 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:45:46 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:45:46 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:45:47 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:45:47 AM 02/13/07 CRITICAL : Authentication Failed:
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > LoadAndAuthenticate
> returned FALSE
> #(89212)# 11:45:51 AM 02/13/07 CRITICAL : CONSOLE > Authentication Failed:
> returning -201
> #(89212)# 11:45:51 AM 02/13/07 NORMAL : Out of process
>
>
>
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Starting console
> #(89212)# 11:47:03 AM 02/13/07 Normal : ZenGetLangValueFromNWLanguage:
> Trying to load the resource DLL from Nls\ENGLISH directory
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Resource is loaded
> successfully
> #(89212)# 11:47:03 AM 02/13/07 Normal : CONSOLE > Inside
> LoadandParseCommand
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > AppData.bSessionRestart
> ==
> FALSE Hiding window
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Command line parameters
> parsed successfully
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : CONSOLE > Init Client
> Successfull!!!
> #(89212)# 11:47:03 AM 02/13/07 NORMAL : Before Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : After Authentication
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Authentication
> Successful!!!
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Initialize returned TRUE
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : RTT > Avg Delay is 0
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Sent out
> WallPaperRequest
> #(89212)# 11:47:04 AM 02/13/07 Normal : CONSOLE > Send Thread : Received
> Startreceiving event
> #(89212)# 11:47:04 AM 02/13/07 NORMAL : CONSOLE > Receive Thread :
> Received
> Startreceiving Event
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Received CMD_AGENT_READY
> Command
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Compression sending is 6
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Value of
> did->DrishtiType
> sent to Agent is 1
> #(89212)# 11:47:05 AM 02/13/07 NORMAL : CONSOLE > Sent out the DisplayInfo
> Packet succesfully
> #(89212)# 11:47:06 AM 02/13/07 Critical : HandlePacket >>Memory
> reallocation
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > LookForTerminate got an
> event
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of SendThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Value returned from the
> ReceiveData(For Header) is -1
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > out of
> StartReceiveThread
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of process
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Receive thread
> terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : CONSOLE > Send thread terminated
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of Startsession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of startsession :
> HandleRCSession
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : Out of DeInit
> #(89212)# 11:47:13 AM 02/13/07 NORMAL : out of HandleRCSession
>
>
> Target PC - A003514
>
> #(768)# 11:45:46 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:45:47 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'A003514.Workstations.UHsg.HFS'
> #(768)# 11:45:47 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Normal : Neither policy settings active. All
> operations disabled.
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 0, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:45:47 AM 02/13/07 Normal : workstation DN -
> A003514.Workstations.UHsg.HFS, treename - HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:45:47 AM 02/13/07 Critical : Workstation NOT yet
> authenticated...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: initializeContext()
> failed...
> #(768)# 11:45:47 AM 02/13/07 Critical : ZENNDSUtil: readVerifyInformation:
> initializeContext() failed for master 1, tree:HFS
> #(768)# 11:45:47 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for master replica returned : -201
> #(768)# 11:45:47 AM 02/13/07 Critical : Unable to reach the eDirectory
> server
> #(768)# 11:45:47 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:45:47 AM 02/13/07 Normal : RMSessionFinished - Begin
> #(768)# 11:45:47 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:45:47 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
>
>
> #(768)# 11:47:02 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenLite.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\ZenPol32.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully loaded
> dependent modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : LoadZenAutilLibraryAndGetProc:
> Successfully loaded ZenAutil.dll and its dependent DLLs
> #(768)# 11:47:03 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempting to read
> policies...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENUtil: ZENIsWorkstationRegistered:
> wsDN = 'CN=A003514.OU=Workstations.OU=UHsg.O=HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation is registered
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Failure in reading
> boolean
> attribute DM:Ignore Policy in CN=A003514.OU=Workstations.OU=UHsg.O=HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Attempt to read using
> user:, tree:HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Workstation Policy -
> 'z_Global Workstation Package:General:Remote Control
> Policy.WorkstationPackages.Workstations.UHsg.HFS'
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: User Policy - ''
> #(768)# 11:47:03 AM 02/13/07 Normal : Only workstation policy settings
> active...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Finished reading
> policies
> #(768)# 11:47:03 AM 02/13/07 Normal : Reading workstation DN and tree
> name...
> #(768)# 11:47:03 AM 02/13/07 Normal : workstation DN -
> CN=A003514.OU=Workstations.OU=UHsg.O=HFS, treename - HFS
> #(768)# 11:47:03 AM 02/13/07 Normal : Loading : C:\Program
> Files\Novell\ZENworks\WMSchApi.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : Workstation IS authenticated...
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
> successfully
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Successfully initialized
> context
> #(768)# 11:47:03 AM 02/13/07 Normal : AgentDSAuthenticationHandler:
> authentication for nearest replica returned : 0
> #(768)# 11:47:03 AM 02/13/07 Normal : ZENNDSUtil: Unloaded modules...
> #(768)# 11:47:03 AM 02/13/07 Normal : UnLoadZenAutilLibrary :Successfully
> unloaded ZenAutil.dll
> #(768)# 11:47:03 AM 02/13/07 Normal : LaunchRcRvAgent: CalculateRTT is
> over...
> #(768)# 11:47:04 AM 02/13/07 Normal : Darapan is loaded successfully
> #(768)# 11:47:04 AM 02/13/07 Normal : Init Proc of RCAgent has been called
> successfully
> #(768)# 11:47:04 AM 02/13/07 Critical : Successfully executed
> RcAgent.DLL's
> Init Proc Address
> #(768)# 11:47:04 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_AGENT_READY is sent
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_SUPRESS_WALLPAPER is received
> #(768)# 11:47:04 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:04 AM 02/13/07 Normal : CMD_KEY_MASK is received
> #(768)# 11:47:04 AM 02/13/07 normal : CMD_DISPLAY_INFO is received
> #(768)# 11:47:04 AM 02/13/07 Normal : Display Info. received. Remote
> Control
> session for P1.
> #(768)# 11:47:04 AM 02/13/07 Normal : Console version is SP1
> #(768)# 11:47:04 AM 02/13/07 Normal : Calling startlookforchangesthread.
> #(768)# 11:47:04 AM 02/13/07 Normal : InitialDisplayInfo sent
> #(768)# 11:47:04 AM 02/13/07 Normal : DRIVER to use is DARPAN
> #(768)# 11:47:04 AM 02/13/07 Normal : CallInitDrishti :
> ESC_START_VIEWING_DARPAN Successful
> #(768)# 11:47:04 AM 02/13/07 Normal : Came out after loading the driver
> #(768)# 11:47:04 AM 02/13/07 normal : Setting hook to cursor shapes is ok
> #(768)# 11:47:04 AM 02/13/07 Normal : Got WM_SWITCH_DESKTOP
> #(768)# 11:47:05 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 Normal : RecvThread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WaitThread : WaitForMultipleObjects
> returned. Closed thread is = 1
> #(768)# 11:47:12 AM 02/13/07 Normal : Periodic Check thread is returning
> #(768)# 11:47:12 AM 02/13/07 Normal : In desktop change thread terminate
> session is set
> #(768)# 11:47:12 AM 02/13/07 normal : Terminate session event is set in
> send
> thread
> #(768)# 11:47:12 AM 02/13/07 Normal : Close msg for visible window.
> Calling
> CloseConnection().
> #(768)# 11:47:12 AM 02/13/07 Normal : Clean up is going to start
> #(768)# 11:47:12 AM 02/13/07 Normal : LookforchangesThread returning
> #(768)# 11:47:12 AM 02/13/07 Normal : WallPaperThread is closed
> #(768)# 11:47:12 AM 02/13/07 normal : All the threads are closed normally
> #(768)# 11:47:12 AM 02/13/07 Normal : Call to update desktop is made
> #(768)# 11:47:12 AM 02/13/07 normal : RC session is completed successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : CZenRmServer::RCRvThread:
> hAcceptThread Signals
> #(768)# 11:47:12 AM 02/13/07 Critical :
> RMAudit::Auditing.cpp:recordAuditLog() The audit record is corrupted.
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: RcAgent.dll is
> successfully unloaded from memory
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory ...
> #(768)# 11:47:12 AM 02/13/07 Normal : RcRvThread: Ict_Uc.dll is not
> unloaded
> from memory and it is forcefully unloaded...
> #(768)# 11:47:12 AM 02/13/07 Normal : Darapan is Unloaded successfully
> #(768)# 11:47:12 AM 02/13/07 Normal : RMSessionFinished - Begin
>

Help me i cannot use my remote-control.

I was using my remote-control a while ago( I think it's been only for 5 mins) , then suddenly It didn't work, how can i fix it? do i have to bring it to mac store?
Message was edited by: BENHONG

I'm having remote control issues as well. It stops working, and the option to disable or enable the IR receiver disappears from the security pane of system preferences. If I start and restart my Mac several times, I can usually bring it back. I use the remote frequently for watching movies. The resetting procedure doesn't work. Anyone know how to deal with this?

Remote control of ipad by hand movements

I think iPad can be remote controlled by hand movements and this is especially necessary in case when you put it on the table and want to change the page of the ebook or want to shift to another song. In such cases, you don't want to handle the iPad, just lazilyyou may want to control it by hand gestures or just say, by your voice. Such control can be made by an app, I think.

Hi John, I don't suppose you got any further with your ipad remote control issue. I'm in a similar situation with an elderly relative, and wondered if Mobile Me might help? We're in the process of setting up an iPad2 from our own iTunes account (might be a different scenario to yours if your dad has his own iTunes a/c?) and as yet don't know if we can actually do what we would like to do... ie. update apps remotely when required, download software for them. I know it's a major hand holding exercise, but at present they're out of internet loop completely and miss out so much, on things like, research/browsing, on-line offers, maps to get places, e-mail etc. And in most cases once these things are set up, interconnectivity is one button push away. So if you have any advice or pointers, they would be very much appreciated.
Also this is not on wifi, as getting broadband for someone else is another story, so it's planned just to be 3G on '3' for now. facetime would be good but don't think the 3G connection would even let you near that, and also I have no idea how much data that would eat up.

Issue with KB2830477 and SCCM 2012 Remote Control Viewer

I've just rolled out Feb '13 updates for Windows 7. The update KB2830477 appears to cause
an issue when closing a remote control session using SCCM Remote Control Viewer
(2012).
The following error appears:
"ConfigMgr Remote Control Viewer has Stopped Working"
"A Problem Caused the Program to Stop Workingcorrectly. Please Close the
Program"
In the Event log, the following event is triggered in Windows Logs>Application.
Faulting application name: CmRcViewer.exe, version: 5.0.7711.0, time stamp: 0x4f42f979
Faulting module name: msxml6.dll, version: 6.30.7601.17988, time stamp: 0x5091ff29
Exception code: 0xc0000005
Fault offset: 0x00056368
Faulting process id: 0x24c0
Faulting application start time: 0x01cf2d7bf99dc96d
Faulting application path: C:\Program Files\Microsoft Configuration
Manager\RemoteControlViewer\CmRcViewer.exe
Faulting module path: C:\Windows\System32\msxml6.dll
This is with an EventID: 1000. Removing the update resolves the issue.
Report Id:
36c3642d-9970-11e3-89bd-028037ec0200

Hi,
I recommend you check the log file CMRcViewer.log:
It records details about the activity of the remote control viewer.
Located in the %temp% folder on the computer running the remote control viewer.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

H E L P ! ! Managing Parental Controls & Cloning using Apple Remote Desktop

Hello folks,
I work in an UK University managing a Lab of Mac Pro's. We've just had a kit upgrade and I've spent the last few days installing and configuring the systems. There are two accounts on each machine; an 'administrator' and a 'student' (a managed account). All managed by Apple Remote Desktop.
Basically, after installing the OS 10.6 and other software, I've setup one machine as I would like it to be and want to clone 'Parental Controls' settings from one machine to the rest. Sounds simple. Hmmm. Well despite being able to see all the other machines on the network and connecting to them using the administrator login, the settings won't copy.
I have being using the 'Copy' & 'Paste Settings' in the Parental Controls Prefs Pane, ensuring that the "Manage parent controls from another computer" is ticked on the destination machine. The settings appear to copy, or when selected duplicate, so there appears to be two versions Photoshop, Illustrator etc etc.
I've follow the limited information I've found on the net, but am still experiencing problems. I've run Disk Utils, checked and repaired the Permissions, used Time Machine to copy the settings using Migrate Users Utility.
I'm not sure if these issues are connected to a problem I had with CS3 licensing where the volume licence "stopped" working. As the Adobe apps are the constantly stating, on the "student" account, that the user doesn't have permission to open them. Despite being ticked in the Parental Controls Panel. I've cured this on one machine, the one I want to clone the Parental Prefs of.
Well … after that monologue - can anyone suggest a way of cloning these prefs (wherever they live) rather than having to format and use Time Machine to clone the entire OS and Mac?
I'd love a Unix command which I could send from ARD - but I'm a still a little green to it's use.
All comments, solutions and help gratefully received.
Thanks in advance,
Dan

Hi
+"Is there any way to permanently install parental controls in on a mac mini with Snow leopard server software on it?"+
I don't think so? Besides there's no need for it. Parental Controls is available as a Managed Preference (or MCX) using WorkGroup Manager either at Users, Group or Hardware Level. Launch the application and click on the Preferences icon and you'll see what I mean.
Tony

VMM 2013 R2 Manager - Remote Control issue

Similar Messages

Maybe you are looking for