VMM - Add 2 hosts in cluster. 1st added OK, 2nd Failed Error 416. Retry gives Error 2912 An instance of the service is already running 0x80070420

Have 2 host cluster as part of infrastructure adding to VMM.
Added cluster server. 1st had no issue and has picked up it's VMs. Second gave this error below:
Error (416)
Agent installation timed out while waiting on service VMMAgentInstaller on host02domain.private.
Recommended Action
Ensure that the Windows Installer service is running on host02.domain.private and try the operation again.
Sure the Windows Installer has nothing to do with this but in case I manually started it on the server without issue.
On retrying first without starting Windows Installer manually and then doing so in both instances I get:
Error (2912)
An internal error has occurred trying to contact the host02.domain.private server: : .
WinRM: URL: [http://host02.domain.private:5985], Verb: [INVOKE], Method: [GetVirtualizationStatus], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/scvmm/AgentManagement]
An instance of the service is already running (0x80070420)
Recommended Action
Check that WS-Management service is installed and running on server host02.domain.private. For more information use the command "winrm helpmsg hresult". If host02.domain.private is a host/library/update server or a PXE server role then ensure
that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
I've tried killing the VMM Agent running on the host (which is running now after the attempted deploy) and rerunning - as the second error indicates it can't run because it's already running (far as I can figure). But even though it takes longer to run then
it still fails with exactly the same error.
I've checked the host and winrm shows as already running and already set up for remote management.
Am I missing something?

Hi Allister,
What is the version of SCVMM ?
Did you follow the document ?
As for VMM 2008R2 ：
"On the Select Host Servers page, in the Computer name box, type either the name of the cluster or the name of any node in the cluster, and then click
Add."
"Do not skip Active Directory name verification. If you do, the wizard will add the host as a stand-alone host instead of discovering the cluster nodes "
"When you specify the name of a failover cluster that was created in Windows Server 2008 or Windows Server 2008 R2, or you specify a node in one of these clusters, the Add Hosts Wizard discovers all nodes in the cluster and adds
them to VMM. "
https://technet.microsoft.com/en-us/library/ee236431.aspx
Also 2012 ：
https://technet.microsoft.com/en-us/library/gg610648.aspx
For your case , I  would suggest you to stop VMM service and remove the added cluster from
scvmm then follow the article and add cluster again .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

  • I would like to add family members to my existing apple id that is used for my iCloud account.  All of the family members already have existing apple ids.  Can I make these existing apple ids part of my family?

    Adding existing apple id to an iCloud family share
    I would like to add family members to my existing apple id that is used for my iCloud account.  All of the family members already have existing apple ids.  Can I make these existing apple ids part of my family?  I have tried this, but "verifying" the apple id always fails with "existing family member" or an error something to the effect "unable to do at this time, try again later."
    Thanks

    "am I still able to register another phone to the same ID?"
    Yes.
    ") that I do end up creating a new apple ID "
    This will cause complications.  i do not recommend this.

  • I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

    I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

    There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

  • Adding a 2nd and 3rd Drive

    I just added a 2nd and 3rd ata drive to my 450 MHZ tower. The motherboard had an open plug that said ata.
    I plugged in the cord (strip) that came with the drive into the board and into the additional hard drives.
    (fyi) I took both hard drives and strip from a working unix server.
    I plugged in power to each.
    I started up the mac. It shows the 1st drive on the desktop, but no others. Disk utility doesn't see the new drives either.
    What did I miss?
    Any help would be greatly appreciated. Thanks.
    PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI
    PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI

    Hi omoriginals ,
    Welcome to the Discussions.
    Your computer can only mount two drives unless you add another ATA controller card in an empty PCI slot. There's one bus that has the ability to control two drives.
    The additional drive and cable you installed will need to be removed. The other that you attached to the existing data cable needs to have its jumper set to "slave" and then attach it to the center position on the cable. The jumpers are small plastic and metal blocks that connect two pins located next to where the data cable attaches to the drive. There should be a diagram on the drive for the settings. Just set it, reinstall then format it with Disk Utility (in your Utilities folder).
    John

  • Adding Used DC under CRMWEB gives error " .dcdef  checked out by others"

    Hello E-Commerce Experts,
    We need to extend E-Commerce 7.0 b2b application (claims and returns). After much struggle, we could finally deploy the custom application. We now would like to extend it and have new fields added.
    We need to to defined a used dependency in the web module project crm/eservice/web/cr_b2b for customer extension DC provided for java action classes (crm/home/crm/ext) but are getting an error saying:
    DC definition could not be checked out: the file .dcdef is checked out by others. None of the objects have been checked out by any other developers.
    Please advise as to how to resolve this error.
    Additionally, we would like to add CRMJAVA SC as a development component, so we could refer the existing java files. But we are not able to import it properly. It shows up as an empty SC in NWDS after being imported.
    Your help would be highly appreciated.
    Thanks!

    I was able to resolve my error. I had created some other instances of the same project under a different workspace.
    Follow these steps for every workspace  you might have created your project in (except the current workspace):
    For every open activity ( Windows -> Show View -> Open Activities)
    - Select your open activity  -> Right Click -> Revert  and then Delete the activity  (Right click -> delete)
    Delete all your open activities.
    Open your current project and Resync all DCs.
    Now try to add used DC for the web module project.
    It should work.

  • Hyper-V host fails with "RPC Server unavailable" error when I try to promote Windows Server in virtual machine to a domain controller

    Host: Windows Server 2012 R2 with Hyper-V and RRAS (for Internet over NAT)
    VM: Windows Server 2012 R2 with installed Active Directory Domain Services
    When I open AD DS configuration window (“promote this server to a domain controller”) many services and programs on my host (include Hyper-V, RRAS & Server Manager) fails with RPC Server unavailable error.

    Hello Aleksandr,
    There wasn't any configuration information, ipconfig /all, network setup, etc. So it's difficult to tell.
    More importantly, are you trying to promote the host server? If yes, that is not advised, for one, because it's a Hyper-V server, (not suggested at all), and two, RRAS is installed. RRAS is problematic with any domain controller because it turns it into
    a multihomed domain controller.
    Active Directory communication fails on multihomed domain controllers
    http://support.microsoft.com/kb/272294/
    Multihomed DCs (with more than one unteamed NIC or multiple IPs) with DNS, RRAS, iSCSI, Clustering interfaces, management interfaces, backup interfaces, and/or PPPoE adapters - A multihomed DC is not a recommended configuration, however there are ways to
    configure a DC with registry mods:
    http://blogs.msmvps.com/acefekay/2009/08/17/multihomed-dcs-with-dns-rras-and-or-pppoe-adapters/
    7 Reasons not to Make Hyper-V a Domain Controller
    http://www.altaro.com/hyper-v/reasons-not-to-make-hyper-v-a-domain-controller/
    Domain Controller as Hyper-V host
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/4ff14bec-a815-473b-8d2a-33e91e17197b/domain-controller-as-hyperv-host?forum=winserverhyperv
    Networking?
    I don't know how your networking is setup, whether there are multiple NICs on the host server, if they are teamed, if you have the host interface set to allow the operating system to share administration, or if there are separate interfaces for each. Can
    the host OS ping/communicate with the DC virtual machine?
    If there are more than one NIC, you have the choice to team the NICs and share the Teamed NICs for the Hyper-V OS and the VMs, or keep them separate where one is devoted for the Hyper-V OS, and one for the VMs.
    Hyper-V Server VLAN Network Configuration
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/0aa71d2a-ebf9-4a3e-bbf5-94db55339fa2/hyperv-server-vlan-network-configuration?forum=winserverhyperv 
    Recommendation:
    Why not just create another VM DC?
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • After host crash - cluster no longer working correctly in SCVMM 2012

    Hi
    one of our nodes in our cluster crashed. It came back. All the VMs on this host were running on other hosts so failover worked fine BUT for 2 VMs. One of those 2 VMs is - according to VMM - running on the crashed host. The other VM is - according to VMM
    - running on another host node which did not fail.
    I have a lot of job errors saying that VMM library object virtuals disk is missing of those two VMs. So I looked into the FailoverManager. There I was able to see that the VMs are running on totaly different host nodes then what VMM tells me. In addition
    those VMs work just fine. I connected to both of them over Hpyer-V and they are just fine and the application also work without a problem. Please not those VMs are not shown twice or missing in VMM.
    Live Migration to the Host node that crashed is no longer possible. But when looking into the status on VMM - it tells me that everything is fine. From Hpyer-V Manager I am able to do live migration to this host. But no longer from VMM console.
    I rebooted the host node with no change. I refreshed the host nodes (all) in FailoverManager and in SCVMM, I refreshed the cluster... nothing. So I wanted to remove the cluster from SCVMM and re-add it. Doesn't work... It started with the first host and
    after that my cluster was somewhat broken (I thought that removing cluster - NOT "uncluster" - wouldn't have an effect on the cluster itself - well I was wrong). Anyway I repaired the cluster it is back into VMM but I still have the issues with the VMs. There
    are only warning on the VMM server that the library object (vhd) is missing but on the cluster nodes itself there are no errors.
    Any ideas what I could do. I have no clue what to do about the VM which is supposed to be on this host but in FailoverManager it is on a totally different server. Any ideas?

    Hi,
    version is SCVMM 2012 RC - yes there were errors with live migration but unfortunately I receive so many warning messages now (about missing library objects for vhd files) that the errors from tuesday are already gone. I guess they might be in database ...
    The log files you asked for are from 2011 when the cluster was created - no entries after that.
    No the cluster is not in Maintenance or Pause mode - i checked that. Remove and re-join the cluster with VMM 2012 RC was already tried. As described above: that failed - the first cluster node was removed and after that the job failed in VMM. I found the
    error message quite ironic because it said that "cluster node 1" is no longer reachable. Nooo really... it just had been removed a second before the "remove cluster" job failed. Unfortunately this job played havoc with my cluster. It took me 4 hours to bring
    it back online (mostly VMs).
    The good thing is, my cluster is somewhat working again - meaning after I repaired it and was able to re-add the missing cluster node back into VMM live migration now works both from Hyper-V and from SCVMM. The VERY bad part is that now several more VMs
    are - according to VMM - runing on "cluster node 1" while the Failover Manager says they are runing on "cluster node 2 or 3...". In addition I get many more warning messages. This error is the one I am trying to eleminate. As said I haven't found anything
    which helped me narrow done a solution. Everything I tried so far didn't have any response or - like the cluster - it made things quite bad (temporary). I checked the Event logs on the cluster nodes and VMM itself. Currently there are no error messages there.
    Warning messages in VMM:
    Warning (23234) VM Refresher encountered an error while creating or updating <vm name> with id XXXXX. VMM cannot find VirutalHardDisk object XXX. Ensure the library object is valid, and then try the operation again.
    Warning (10647) The virtual network adapter for the virtual machine <vm name> is connected to a virtual network switch <swtich name> that is not valid.
    Does anyone know how to change the time interval of the "VM Refresher"? I get those warning messages for each VM every 2 min. As there are several VMs affected by now I have several thousend messages each day...

  • Changing Hyper-V host and cluster virtual IP addresses to new subnet/VLAN

    I have a 2 node Hyper-V 2012 R2 failover cluster, managed by System Center Virtual Machine Manager 2012 R2, and I would like to change the IP addresses of the hosts and the cluster, in order to move them to a new subnet and VLAN. The existing and new subnets
    are able to route to each other so all hosts will still be able to communicate throughout the parts of the process where they may be on separate subnets. There is also a dedicated cluster heartbeat network on its own subnet and VLAN that I am not altering
    in any way.
    The 2 hosts are configured with 4 nics in a team, with dedicated virtual interfaces for each of the following:
    -Live Migration
    -Cluster Heartbeating
    -Host management/general traffic (the cluster virtual IP address is also on the same subnet as these interfaces).
    It is the host management/general traffic addresses that I want to change. The interfaces were created and configured with the Add-VMNetworkAdapter, New-NetIPAddres and Set-VMNetworkAdapterVlan commands.
    Please advise if the following process is correct:
    1) Evacuate all the VMs from the first host to be changed and put it in maintenance mode.
    2) Use Set-VMNetworkAdapter to change the name of the interface (the current name refers to the VLAN it's on)
    3) Use Set-NetIPAddress to change the IP address and gateway of the interface as appropriate
    4) Use Set-VMNetworkAdapterVlan to set the VLAN ID
    5) Take the host out of maintenance mode and move all VMs off the other host
    6) Repeat above steps on the other host
    I know that I will then need to change the cluster virtual IP address, but I have no idea how to do this or where to look for that setting. Please advise!
    Cheers.

    Hi new_guise,
    For changing cluster node's IP address please refer to the link below :
    https://support.microsoft.com/kb/230356?wa=wsignin1.0
    For changing VIP please refer to this article :
    http://blogs.technet.com/b/chrad/archive/2011/09/16/changing-hyper-v-cluster-virtual-ip-address-vip-after-layer-3-changes.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • "Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

    Hello,
    I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
    I'm running Windows Server 2008 R2,
    Any ideas?

    Hi saeedawadx,
    Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
    or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
    The following related article will give more helpful tips,
    The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
    http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
    Trouble Connecting to Cluster Nodes? Check WMI!
    http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Explain me about the Host,Node,Cluster,Binary volume in HANA terminalogy ?

    Hi Team ,
    I am just refering through some documents related to SAP HANA Architecture and Landscape and came through the above mentioned jargon , will u please clearly explain me about these and how they are related .
    Thanks
    Dinu Pendyala

    Hello Dinesh,
    In SAP HANA Architecture there is no mention of any host, node, cluster, binary volume.
    These all are the common term, which is used in computer world.
    The same meaning is applicable everywhere.

  • Failed to add node to cluster

    Hey, I am currently migrating my cluster.
    I removed the server pool master according to the metalink note by doing a failover (stopped the agent on the server pool master)
    Deleted the old master (node2) from the server pool.
    Executed the cleanup script on node2 and switched it off
    Modified the cluster.conf on the remaining node and remove the entries for the old master node2.
    Replaced the old server with new hardware -
    same name - same ip.
    Now I try to add this server to the server pool, but I get a timeout message
    OVM-1006 Register Oracle VM Server (node2) Failed: errcode=00001, errmsg=CDS accquire lock /etc/ovs-agent/db/srv.lock timeout. locker process is 8339
    Where can I look ?
    Christian

    Lemeunier wrote:
    > environment: sles 10 sp3, oes2, cluster services
    >
    > problem: reconfiguring oes to add a node to the cluster is causing the
    > error *failed to add node to cluster*
    >
    > history: I installed a 4 node cluster in a HP C7000 blade. We had to
    > replace the network switch in the blade center by a virtual connect
    > flex-10. This resulted in a loss of network connectivity, so I removed 3
    > of 4 nodes from cluster and eDirectory.
    > This worked fine, replication and time synchronisation was succesfully
    > and all server objects belonging to these 3 servers were deleted.
    >
    > Now the new switch has been configured and network connection
    > reestablished. Reconfiguring eDirectory and other oes2 services
    > succeeds, alle server objects are recreated, eDirectory is in sync, but
    > reconfiguring cluster services does not succeed.
    >
    > What do I have to do, to reconfigure cluster service and add nodes to
    > the cluster?
    >
    > Thank you for all hints.
    >
    > Ursula
    >
    >
    Did you remove the cluster rpms and then reinstall the rpms. I would
    recommend following TID 3131978 and see if that helps.

  • Finding the handler host in cluster when using sticky sessions

              Our design is like this: we have Apache front-ending the WL cluster. The session
              is not replicated across WL hosts in cluster. However, the Apache-weblogic bridge
              takes care of handling sticky - sessions ( i.e. forwarding requests in same session
              to one host in cluster )
              Now, we have some code running on Apache itself , in Perl.
              The requirement is as follows : In the Perl code, we trap certain requests which
              are NOT forwarded to Weblogic. However, in the Perl code, we do trap the JSESSIONID
              cookie. Now, using this cookie value, is it possible to know which WL host in
              cluster is handling its corresponding session ??
              This is required, since the Perl module is supposed to make an explicit HTTP request
              to that WL host - passing the JSESSIONID as a parameter - for authentication.
              Thanks,
              Subodh
              

    can the perl module send this request to the apache webserver itself and set
              the cookie the same? That would allow apache plugin to send it to the right
              node.
              "Subodh" <[email protected]> wrote in message
              news:[email protected]..
              >
              > Our design is like this: we have Apache front-ending the WL cluster. The
              session
              > is not replicated across WL hosts in cluster. However, the Apache-weblogic
              bridge
              > takes care of handling sticky - sessions ( i.e. forwarding requests in
              same session
              > to one host in cluster )
              >
              > Now, we have some code running on Apache itself , in Perl.
              >
              > The requirement is as follows : In the Perl code, we trap certain requests
              which
              > are NOT forwarded to Weblogic. However, in the Perl code, we do trap the
              JSESSIONID
              > cookie. Now, using this cookie value, is it possible to know which WL host
              in
              > cluster is handling its corresponding session ??
              >
              > This is required, since the Perl module is supposed to make an explicit
              HTTP request
              > to that WL host - passing the JSESSIONID as a parameter - for
              authentication.
              >
              >
              > Thanks,
              > Subodh
              >
              

  • I ordered a ringtone that came as a song and did not appear in a position to be added.  It did not show up but came through as a song and asking me to add it to a playlist.  This is not what I wanted to do and I promptly follow the prompt to "Buy"

    I ordered a ringtone that came as a song and did not appear in a position status to be added.  It did not show up but came purchased as a song and now asking me to add it to a playlist.  This is not what I wanted to do and I promptly follow the prompt to "Buy more options" to get what I thought was a ringtone.  Please help!

    The ONLY place to buy a ready made ringtones is from the iphone itself from the itunes app, then "More">"Ringtones"
    If you bought from your computer, then you need to create the ringtone.  You can create a ringtones from just about any song/sound file for free.
    Google will find several ways to do this.

  • Lab View crashes when I add element to cluster

    Hi guys,
    My program is quite large, so I try to explain my core problem. When I add a new element in the cluster called "Summary" it obviously generates an error.
    But when I start to run the program, bearing in mind that the program should show me the occured errors, LabView 8.5 crashes.
    This cluster has about 160 elements,18 local variables,which are distrubuted in the whole program and its information is used in different SubVi's.
    It's strange that my other clusters react normally according to that problem and the program doesn't crash.
    What could the problem be?
    Cheers, Nobby

    Hi Nobby,
    what answer do you expect?
    All we know is that you named your cluster "Summary". We neither have a vi attached nor the cluster typedef... And you don't give any error description (apart from "it crashes")...
    All I can say is: probably you have some overuse of local variables
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Capacity Planning for Hyper-V individual host and Cluster

    Hi Experts
    I need to know some basic idea about Capacity planning for Hyper-V which requires Capacity Planning for Hyper-V individual host and Cluster.
    I got attached info on websites but still not clear. Can someone link me to an effective website or help me to calculate the required sizing. W
    Regards Suman B. Singh

    Hi,
    You might want to check out these websites:
    http://www.microsoft.com/en-us/download/details.aspx?id=39057
    http://technet.microsoft.com/en-us/library/dd277865(v=office.12).aspx
    http://technet.microsoft.com/en-us/solutionaccelerators/dd537570.aspx
    Cheers
    Andrew

Maybe you are looking for