VMM Agent install fails on Windows Server 2012 R2 Hyper-V

Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 server either from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
Thanks
Kumaresan Lakshmanan

So, I've managed to research this some more since Thursday and I've come to the conclusion that Hyper-V does a horrible job of supporting Qualcomm NIC cards. That's the only thing I can conclude as far as where the issue is originating. I've read many
post and walkthroughs but nothing that has helped. The issue wasn't with any settings in the domain controller. The issue was that there really is a slow connection originating at the domain controller that is a VM and has network connectivity through the
virtual switch from Hyper-V. So, next question is, how do I get the DC to have better connectivity through the NIC that Hyper-V won't give it? If hyper-v would allow passthrough, this would be so much simpler. VM-ware is looking really good at this point.
Im disappointed in MS right now.

Similar Messages

ProClarity 6.3 PAS install fails on Windows Server 2012

We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
The following requirements are missing:
Windows Server 2003 SP1
We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
Has anyone successfully installed on Windows Server 2012? Is there a way to force the installer not to check for the OS?
Thanks.
Kevin

I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product. Remember, after the
installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64 installation. Also, the App pool needs to work with .NET 2.0 not 4.0.
Good luck!
Byron
BNavas

Windows Azure Tools for Visual Studio 2013 - v2.2 install fails on Windows Server 2012 R2

Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
The installation completes without any errors on my VM running Windows Server 2012 R2, however its not recognized in VS2013 ? It also breaks the Publish functionality when I try and publish a web site to my hosting provider.

I tried install, uninstall, reinstall cycle several times without success. Any help would be greatly appreciated.
here is my About info:
Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Installed Version: Professional
LightSwitch for Visual Studio 2013   06177-004-0444002-02824
Microsoft LightSwitch for Visual Studio 2013
Microsoft Office Developer Tools for Visual Studio 2013 ENU   06177-004-0444002-02824
Microsoft Office Developer Tools for Visual Studio 2013 ENU
Team Explorer for Visual Studio 2013   06177-004-0444002-02824
Microsoft Team Explorer for Visual Studio 2013
Visual Basic 2013   06177-004-0444002-02824
Microsoft Visual Basic 2013
Visual C# 2013   06177-004-0444002-02824
Microsoft Visual C# 2013
Visual C++ 2013   06177-004-0444002-02824
Microsoft Visual C++ 2013
Visual F# 2013   06177-004-0444002-02824
Microsoft Visual F# 2013
Visual Studio 2013 Code Analysis Spell Checker   06177-004-0444002-02824
Microsoft® Visual Studio® 2013 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
ASP.NET Web Frameworks and Tools 2012.2   4.1.21001.0
For additional information, visit http://go.microsoft.com/fwlink/?LinkID=309563
ASP.NET Web Frameworks and Tools 2013   5.0.11001.0
For additional information, visit http://www.asp.net/
BusinessObjectEditor   1.0
Information about my package
CodeRush for Visual Studio   13.2
Common Azure Tools   1.0
Provides common services for use by Azure Mobile Services and Windows Azure Tools.
CreateLayoutWizardPkg   1.0
Create layout wizard.
DevExpress.ExpressApp.Design.DesignDynamicPackage   1.0
DevExpress VSIX Package
DevExpress.ExpressApp.DesignPackage   1.0
DevExpress VSIX Package
DevExtreme.Design   13.2.6
DevExtreme Visual Studio integration package
DXCore for Visual Studio   13.2
DXCore for Visual Studio
PreEmptive Analytics Visualizer   1.2
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools
Workflow Manager Tools 1.0   1.0
This package contains the necessary Visual Studio integration components for Workflow Manager.
XtraReports package   1.0
XtraReports package

CryptDecrypt function failing on Windows Server 2012

Hi,
I have a sample program which does encryption / decryption.
This program works on Win7 and Win8.1 but fails on Windows Server 2012.
Please can somebody help me on resolving this issue?
const char KEY_FILE[255] = "C:\\key.txt";
In Constructor:
dwResult= 0;
hProv = 0;
hKey = 0;
hSessionKey = 0;
cbBlob = 0;
pbBlob = NULL;
cbBlob = file_length(KEY_FILE);
pbBlob = (BYTE*)malloc(cbBlob + 1);
memset(pbBlob, 0, cbBlob + 1);
FILE *fp = fopen(KEY_FILE, "rb");
if (fp) {
fread(pbBlob, 1, cbBlob, fp);
fclose(fp);
} else {
free(pbBlob);
pbBlob = NULL;
if (!CryptAcquireContext(&hProv, NULL, MS_DEF_PROV, PROV_RSA_FULL, 0))
dwResult = GetLastError();
if (dwResult == NTE_BAD_KEYSET)
if (!CryptAcquireContext(&hProv, NULL, MS_DEF_PROV, PROV_RSA_FULL, CRYPT_NEWKEYSET))
dwResult = GetLastError();
MessageBox("Error [0x%x]: CryptAcquireContext() failed.", "Information", MB_OK);
return;
} else {
dwResult = GetLastError();
return;
if (pbBlob) {
if (!CryptImportKey(hProv, pbBlob, cbBlob, 0, 0, &hSessionKey))
dwResult = GetLastError();
MessageBox("Error [0x%x]: CryptImportKey() failed.", "Information", MB_OK);
return;
} else {
if (!CryptImportKey(hProv, PrivateKeyWithExponentOfOne, sizeof(PrivateKeyWithExponentOfOne), 0, 0, &hKey))
dwResult = GetLastError();
MessageBox("Error CryptImportKey() failed.", "Information", MB_OK);
return;
if (!CryptGenKey(hProv, CALG_RC4, CRYPT_EXPORTABLE, &hSessionKey))
dwResult = GetLastError();
MessageBox("Error CryptGenKey() failed.", "Information", MB_OK);
return;
//{{AFX_DATA_INIT(CCryptoEncryptionDlg)
m_cipher = _T("");
m_clear = _T("Encrypt me");
When I click on Encryption Button:
UpdateData();
unsigned long length = m_clear.GetLength() +1;
unsigned char * cipherBlock = (unsigned char*)malloc(length);
memset(cipherBlock, 0, length);
memcpy(cipherBlock, m_clear, length -1);
if (!CryptEncrypt(hSessionKey, 0, TRUE, 0, cipherBlock, &length, length))
dwResult = GetLastError();
MessageBox("Error CryptEncrypt() failed.", "Information", MB_OK);
return;
m_cipher = cipherBlock;
m_clear = "";
free(cipherBlock);
UpdateData(FALSE);
When I click on Decrypt button:
UpdateData();
unsigned long length = m_cipher.GetLength() +1;
unsigned char * cipherBlock = (unsigned char*)malloc(length);
memset(cipherBlock, 0, length);
memcpy(cipherBlock, m_cipher, length -1);
int retVal = CryptDecrypt(hSessionKey, 0, TRUE, CRYPT_DECRYPT_RSA_NO_PADDING_CHECK, (BYTE*)cipherBlock, &length);
if (!retVal)
dwResult = GetLastError();
MessageBox("Error CryptDecrypt() failed.", "Information", MB_OK);
return;
dwResult = GetLastError();
m_clear = cipherBlock;
m_cipher = "";
free(cipherBlock);
UpdateData(FALSE);
The source is from http://www.codeproject.com/Articles/11578/Encryption-using-the-Win-Crypto-API
I just got the source code from above link and compiled in VS2012. The same code works as-is in Win8.1 but fails in loading itself in Windows Server 2012.
Thanks in advance.
Regards,
Raj

Windows CE is pretty old but I see that used a bit in 3rd world markets where people are not rich enough to afford more modern gear.
I use 7-zip for backups, and the SDK is open source which means it can be used in another project such a specialized backup or other tool
7-zip has the AES in the SDK which is been checked as solid.
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Not able to install IIS on Windows Server 2012

I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.

Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

SQL Server 2008 R2 & 2008 R2 SP1 installation fails in Windows server 2012

Hi All,
I have a strange issue here. I have a Windows server 2012 VM where i want to deploy SQL 2008 R2 Enterprise edition.
When i Run the setup every thing goes fine and during the installation wizard i get this error " The Folder path Program files contains invalid characteristics. I get this error 3 - 4 times during the installation wizard and the installation fails.
Below is the screenshot for the same.
So i checked few articles regarding the compatibility issue and found the below article and upgraded my setup to SQL 2008 R2 SP1 using the below article.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Again i still see the same above errors and with that a new error related to a MOF File.
Below are the contents of the error logs. Can some one assist on this issue.
======================================================
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 13:53:03
End time: 2015-01-15 14:04:29
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0xA60E3551%400xD3BEBD98%401211%401
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: D:\SQLServer2008R2_SP1\x64\setup\
Installation edition: ENTERPRISE
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: E2KLAB\SCOMAC
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: D:\SQLServer2008R2_SP1\SP
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: E2KLAB\SCOMAC
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: E2KLAB\SCOMAC
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr,E2KLAB\SCOMAC,E2KLAB\SCOM Admins
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\sql_common_core_loc_Cpu64_1033_1.log
MSI error description: The folder path 'Program Files' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\SystemConfigurationCheck_Report.htm
Gautam.75801

Hi Alberto,
Still the same issue.
I installed the SQL 2008 R2 without SP1 and changed the service accounts to system account and repaired the .NET using the .NET Repair tool
Also changed the installation directory to D:\ Drive this time. Still same issue.
log file:
===============
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 22:55:37
End time: 2015-01-15 23:07:32
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SQLSysClrTypes_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SQL Server 2008 R2 Datacenter edition for only Windows server 2008 R2\x64\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: D:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SystemConfigurationCheck_Report.htm
Any other suggestion i can try ?
Gautam.75801

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

Windows server 2012 Datacenter Hyper-V Cluster -- Failed to validate Operating System Installation Option?

Hi I have a 4 node Windows server 2012 Hyper-V cluster. When I try to run a cluster validation report, everything else is fine but it fails at validate the Operating System Installation Option step. I did some research but couldn't really find any solution.
Anyone knows how to pass this test? Thanks.
Here's the error I get when run the test:
An error occurred while executing the test.
The operation has failed. An error occurred while getting the operating system installation option for node "server1"

Hi JasonLiu2002,
Please post the original error information, the current information is so wide that difficult to determine where may have issue and please offer more information about your
server configuration, you can refer the following article to prepare your cluster environment first.
Windows Server 2012 Hyper-V Best Practices (In Easy Checklist Form)
http://blogs.technet.com/b/askpfeplat/archive/2013/03/10/windows-server-2012-hyper-v-best-practices-in-easy-checklist-form.aspx
When you preparing the new cluster on Server 2012 please install the Recommended hotfixes and updates for Windows Server 2012-based failover clusters updates.
http://support.microsoft.com/kb/2784261
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

If DPM 2012 agent installation support to windows server 2012 ?

i have DPM 2012 and i need to install agent on windows server 2012

Yes, you need.
You can refer to these links :
DPM 2010
http://technet.microsoft.com/en-us/library/ff399140.aspx
DPM 2012
http://technet.microsoft.com/en-us/library/jj860400.aspx
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions.

Getting error 'proc_createNewAppSiteDomainIds' when I try to install SharePoint on Windows Server 2012

I have a Windows Server 2012 setup with SQL 2012 SP1 installed. I have tried to install Sharepoint Foundation 2013 and also full blown Sharepoint version...but during the wizard setup I always get 'Cannot find the object 'proc_createNewAppSiteDomainIds',
because it does not exist or you do not have permission.
The install created my db in sql 'team1p-vm' but that is it.
What am I missing?
During the install I have tried both Complete and Stand-alone as the Server Type.
When it gets to the product configuration wizard I use:
Create a new server farm
I enter my database server name: team1p-vm
Database name: SharePoint_Config
I enter my db access account
I enter a farm security settings passphrase
I use 17012 as my port number, select NTLM
I see my configuration settings...
Click Next and I get the error on task 3 of 10.
here is the dump of the application Log: At least some of it.
An exception of type System.Data.SqlClient.SqlException was thrown. Additional exception information: Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.
System.Data.SqlClient.SqlException (0x80131904): Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.

Can you see if there is anything in the SQL ERRORLOG on the SQL Server that may help at the time you see this error?
Does your user account (the user you're installing SharePoint with) have the sysadmin fixed role in SQL Server?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

Windows 8.1 SOFTWARE registry hive load failed on Windows Server 2012

Hello,
I am participated in custom Windwows Software backup/restore project development that requires load of Windows SOFTWARE/SYSTEM registry hives from target OS system drive connected to Windows system.
On all Windows version except Windows 8.1 program works correctly but when host system (on that programm run on) is Windows Server 2012 or Windows 8 and target system is Windows 8.1 registry hive load failed with following error:
Failed to load f:\Windows\System32\config\software: [1009] The configuration registry database is corrupt.
After run of 'chkdsk /r' error still remained. All requred security privileges (SE_BACKUP, SE_RESTORE) are applied. All systems are 64-bit.
Generally even system registry editor (regedit) could not open SOFTWARE hive from Windows 8.1 with following error:
Cannot Load f:\Windows\System32\config\software: Error while loading hive.
But when host system is Windows 7 or Windwos Server 2008 then SOFTWARE hive loaded without any problem.
So is there some Windows 8/8.1 registry hives validation mechanism or additional security checks tha prevents load of registry hives fromother OS instance?

Sorry for later response. I was busy with other tasks.
The procMon tool shows RegLoadKey is failed when it tried to load the hive on Windows 8.1 (8.1 based WinPE also). On Windows 7, I didn't see the error (Shows Success instead of REGISTRY CORRUPT). Once the hive is load & unloaded on Windows 7 OS, the
check sum of the hive is changed, and I can load the updated hive with regedit in Windows 8.1 OS.
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\SQMClient\Windows","SUCCESS",""
"reg.exe","752","RegQueryKey","HKLM","SUCCESS","Query: HandleTags, HandleTags: 0x0"
"reg.exe","752","RegOpenKey","HKLM\Software\Microsoft\Rpc","SUCCESS","Desired Access: Query Value"
"reg.exe","752","RegQueryValue","HKLM\SOFTWARE\Microsoft\Rpc\IdleTimerWindow","NAME NOT FOUND","Length: 144"
"reg.exe","752","RegCloseKey","HKLM\SOFTWARE\Microsoft\Rpc","SUCCESS",""
"reg.exe","752","QueryNameInformationFile","C:\Dhoni","SUCCESS","Name: \Dhoni"
"reg.exe","752","RegQueryKeySecurity","HKLM","SUCCESS",""
"reg.exe","752","RegLoadKey","HKLM\target1","REGISTRY CORRUPT","Hive Path: C:\Dhoni\SYSTEM1"

Installing driver on windows server 2012 R2 in VAIO-VPCEH38FN model

Hi,
Q1. I'm using Windows server 2012 R2. How can I install ethernet driver,Wifi Driver, Bluetooth driver etc in my VAIO laptop. can i install or not?
Q2. can i install one Windows 7 and another Windows server OS in same drive?
Please reply soon.. Thank you!
Rajnikant

Hi Rajnikant,
>>>Question1
As Dave have mentioned above, we may need to consult with the manufacturer of the laptop.
>>>Question2
If you want to create a multi-boot system, please refer to the link below,
http://technet.microsoft.com/en-us/library/ee829686(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support

WSUS Role Failing on Windows Server 2012

Hi Team,
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 25 - Connection string is not valid)
When we enablling the role on WIndows server 2012, I got the error like
Instance Name Properly doest not exist
Paramater name : ConfigurationStore
But SQL server is working fine

When we enablling the role on WIndows server 2012, I got the error like
is this question related to WSUS + SUP + CM 2012 ? If so, some help from
here?
Anoop C Nair -
@anoopmannur :: MY Site:
www.AnoopCNair.com ::
FaceBook:
ConfigMgr(SCCM) Page ::
Linkedin:
Linkedin<

VMM Agent install fails on Windows Server 2012 R2 Hyper-V

Similar Messages

Maybe you are looking for