VMM Agent Installation Issues (Was previously installed fine, now refuses to install (ends prematurely)

The VMM agent was installed on two Hyper-V host servers just fine (they were then removed temporarily from SCVMM), but trying to add the servers back into SCVMM it insisted the versions of the agents on the two hosts were unsupported (even though it
installed them) so it requested they were removed before retrying, after removing the agents it now refuses to install them and suggests installing them locally. Installing them on the local host manually just causes the installation to end prematurely.
The firewall is completely disabled
UAC is turned off
I have also tried running from elevated cmd using msiexec /I
Any ideas??

Hi,
Please refer below as it has some useful troubleshooting steps that might help you.
http://support.microsoft.com/kb/2742275
As you have tried from an elevated cmd, have you tried restarting Add Host job in VMM as the last step?
http://networkerslog.blogspot.com/2013/07/unable-to-add-hyper-v-host-due-to.html
You can use PowerShell to reassociate the Host.
http://blogs.technet.com/b/jonjor/archive/2013/02/15/managing-hyper-v-hosts-using-virtual-machine-manager-fails-with-error-0x8033803b.aspx
Let me know of any development.
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

Similar Messages

Oracle 10gR2 Grid Management Agents installation issues

I have downloaded the Grid Management Agent from the oracle downloads website and installed on one of my AIX servers but after running through the installation the server does not show up in Grid Control.
Our Grid Control is running on RH4 server.
The platform of host server i am attempting to install the agent on is AIX5.3
I unzipped the following file
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I ran the installer and it all seemed to work ok
I have checked the dbconsole is running,EMCTL STATUS DBCONSOLE
I have checked the agent is running EMCTL STATUS AGENT
I have checked the listener is running LSNRCTL STATUS
I have checked the database is up by CONNECT / AS SYSDBA
I can conect to the http://myserver:1158/em
The local enterprise manager works fine however as i say the server does not appear in my Grid Control console.
I have restarted al the afforementioned listeners, agents etc.
Can anyone give me a pointer as to why after what would appear to be a succesfull install the serevr does not appear in Grid Control console.

yingkuan again thanks for the reply
I have read the installation readme and it says i have these installation methods
1 - Methods for mass deployment
2 - Using Oracle Universal Installer (OUI) to install agent
3 - silent installation
4 - NFS Mounted agent installation
I am running the runInstaller method (2) from the list above
Like i say i basically downloaded the following file from Oracle Downloads:
AIX_Grid_Control_agent_download_10_2_0_3_0.zip
I FTP'd the file from my PC to the server i wish to be the agent.
I then ran the runInstaller from AIX_Grid_Control_agent_download_10_2_0_3_0/aix/agent/install.
However at no point was i asked to insert the OMS server or any other details.
I have read a couple of different readme files and followed what i believe to be the installation instructions. Could you or anyone else possibly throw any light on what i am doing wrong.
again any assitance greatly appreciated

Adobe Flash Player 9 was previously installed with elevated permissions

I have had to disable flash on our websites in order to make
them useable. Looks like flash 9 was updated yesterday and now pops
up a dialog asking to be reinstalled with admin privs. Considering
no one on aprox 250 machines has admin privs, I am now faced with
the task of spending 15 minutes installing and or upgrading flash
on 250 pcs.
THIS IS NOT ACCEPTABLE. what kind of QA did you do on this
release, because im pretty pissed right now.
I have tried the fix located here: (
http://dontpokebadgers.com/axaa/
) which approves the classID, but this does not seem to work. I am
sure other people must be experiencing this issue. I require you to
perform one of the following actions:
1) Provide a method to disable auto updating the flash active
x control
2) Provide group policy settings that will enable seemless
installation in the background. This would ideally be registry
based and not have anything to do with an MSI file that I would
need to bundle into a startup script.
3) Roll back flash to a working version that does not have
this horrible bug
4) Silently fail to update flash, as the old flash still
renders the content after the error message has been cleared.
Please respond ASAP. I am sure you are about to get a flood
of complaints as you have now changed the default behavior of the
flash player, which unfortunately, much of the internet now
uses.

There already is a method for disabling auto-update, as well
as control over many other options for your users... So this isn't
a bug at all. This is auto-update doing what it's supposed to do.
As the network admin you have to disable it.. Read on...
First, as a network install you should be using the (free)
licensed distribution version of Flash Player. The licensing is
here:
http://www.adobe.com/licensing/
That will get you EXE installers for your network if you want them.
Most importantly it gives you the legal ability to distribute the
player and then control it using the following....
Flash Player Administrator's Guide:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
Also please keep in mind that these forums are not official
support channels. They're peer-to-peer support. So in the future
please go through
http://www.adobe.com/support/flashplayer
for needs such as this. We do offer support to network admins
supporting the install...

Audit Vault Agent Installation issue

Hi All,
I have installed the following things
1) Audit Vault Server (10.2.2.0.1) on a Windows 2003 Server
2) I completed the post-installation tasks
3) I am trying to install Audit Vault agent (10.2.2) on HPUX (11.11) machine.
I start the AV Agent runInstaller, and fill the details like AVAgent name, Username, connect String etc, then click on next , it throws the following error:
"error1: the AV server is expecting an agent with the given name to be installed on another machine"
I am able to ping from Windows to HP machine and Vice versa (By IP Address and Hostname).
Can anyone tell me where i am going wrong and how to solve it.
Please mail to my email address ([email protected])
Thanks & Regards,
Rakesh

Hi,
The details of the installation done so far:
1) I have installed "Oracle Audit Vault Server (10.2.2)" on a Windows 2003 machine providing the following details
a) Audit vault Name
b) Audit Vault Home
c) Audit Vault Administrator
d) Administrator Password
e) Audit Vault Auditor
f) Ausitor Password
g) Database Vault Owner and Manager
h) Created a Audit Vault Agent user and added the user to the udit Vault server using AVCA.
2)I invoke the "Audit Vault Agent" Installer from a HP-UX machine and provide details viz.,
a) Audit vault Agent Name (Same name when i executed the AVCA command above)
b) Aduit Vault Agent Home
c) Agent Username
d) Agent Password
e) Audit Vault Server Connect String (Provide the Database details as mentioned in Audit Vault Server (localhost:port:servicename)
and when i click on the next button it throws me the following error:
"error1: the AV server is expecting an agent with the given name to be installed on another machine".
Hope this gives you a better idea. Waiting for your reply.
Thanks & Regards,
Rakesh

I have downloaded Viber to my iPhone 4s, it was previously working but now displays a message saying i need to connect to the internet before i can make a call or anything else, My phone is connected but the app does not seem to recognise this?

I have downloaded Viber to my iphone 4S, it was previously working, but as of today it has continually asked for an internet connection when i try to make a call or send a message. It displays this message while connected to the internet at my home, or with 3g. my internet connections seems to work fine on other apps that require this. I have tried to reinstall viber but i can not not setup my profile becauase the same message displays. does anyone know how i can resolve this?

Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
Tim

Issue is it was previously installed on another computer. How do we install it on our new computer? The old computer is gone.

We have a 3 year old iPod touch we are trying to I install on our computer. The

- Transfer iTunes purchases:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
newer copy
- Connect the iPod to your computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup

Lion Macbook Air installation Issues - Won't Install

I sucessfully installed Lion on my iMac, then I downloaded it with my same user id from my macbook air (1.4ghz). I proceed with the installation, it claims to finish and then reboots. The Lion App store icon then sits on my dock and the computer is still running Snow Leopard at least it seems to be. However, when I go to about this mac it says 10.7.
This is a mistake since the machine is still physically running snow leopard, there is no mission control, no air drop, etc, AND the lion icon is still in my dock waiting to install!
I have repeated this process countless times and keep getting the same results.
Please help!

did you mean to say 'this problem has been SOLVED' ?
i'm having the same issue.... and always presumed the downloaded lion install was fine since it does image checking, etc.
either way.... i'll be giving it another download and try again

DPM Agent Installation issue.

A target server was running fine. All databases replica becomes inconsistent then to troubleshoot I uninstall DPM agent and trying to reinstall.
Firewall is enabled on target server , When I am trying to install from DPM console, getting error : Error 319 : Agent operation failed with communication error with DPM Agent Coordinatior service on target server.
When I tried to install at client end, its giving error : DPMAgentinstaller failed with errorcode =0x80070643,error says, fatal error during installation. Check log files in [WINDIR]Temp\MSDPM*.Log
When I checked log at temp folde, All I find Installer error 1708,1709 and 2205 2228.
Any thoughts.
Thanks in Advance

Hi
Maybe try adding a rule to the firewall:
netsh advfirewall firewall add rule name="DPM Remote Agent Push" dir=in action=allow service=any enable=yes profile=any remoteip=<IPAddress>
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Installation issues - Finalcut not installing but all other programs do.

I just recently upgraded to Snow Leopard (not sure if that has anything to do with it.) I have the Final Cut Studio 2 package. I've never had an issues installing, just putting the discs in one after the other as usual. However this time Final Cut is not appearing anywhere on the hard drive. Any suggestions would be appreciated. Thanks.

Eva, It's unclear to me exactly what you did, or what happened. Are you saying you installed the entire FCS2 package, but then when you looked in the Applications folder, FCP wasn't there?
Before you installed Snow Leopard, as Tom W. wrote, did you completely erase your iMac's hard drive?
I read your previous post, and it looks like FCP was working okay before you upgraded the OS. It could be there was just some glitch during the installation process. Rare, but it happens. Doing another clean erase and install might get you up and running again.
BTW, any particular reason why you upgraded the OS? My observation, especially with pro apps, is if everything is working well, it's best to stay with the same OS the apps were originally designed for.
Tom T.

DPM 2012 Agent installation issue

I have SCDPM 2012 RTM installed on my machine and whenever I try to install the agent remotely , DPM services stops and installation stucks at 1 percentage,
Mohan Kumar.

hi Both,
Yes I tried both the options mentioned but still I am facing the same issue. My Agent Co-ordinator service in DPM Master server goes stopped mode frequently. Below are the errors.
+ System
- Provider
   [ Name] Service Control Manager
   [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
   [ EventSourceName] Service Control Manager
- EventID 7036
   [ Qualifiers] 16384
   Version 0
   Level 4
   Task 0
   Opcode 0
   Keywords 0x8080000000000000
- TimeCreated
   [ SystemTime] 2012-09-17T09:17:10.071569200Z
   EventRecordID 86366
   Correlation
- Execution
   [ ProcessID] 588
   [ ThreadID] 8352
   Channel System
   Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
   Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
   440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00   D.P.M.A.
0008: 43 00 2F 00 31 00 00 00   C./.1...
+ System
- Provider
   [ Name] Service Control Manager
   [ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
   [ EventSourceName] Service Control Manager
- EventID 7036
   [ Qualifiers] 16384
   Version 0
   Level 4
   Task 0
   Opcode 0
   Keywords 0x8080000000000000
- TimeCreated
   [ SystemTime] 2012-09-17T09:17:10.071569200Z
   EventRecordID 86366
   Correlation
- Execution
   [ ProcessID] 588
   [ ThreadID] 8352
   Channel System
   Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
   Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
   440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00   D.P.M.A.
0008: 43 00 2F 00 31 00 00 00   C./.1...
Mohan Kumar.

SCOM Agent installation Issue

Dear all,
We have SCOM 2012 r2 , when we install agent through discovery . We got the below error
The Operations Manager Server cannot process the install/uninstall request for computer xxxxx due to failure of operating system version verification.
Operation: Agent Install
Install account: XXXXX
Error Code: 80070035
Error Description: The network path was not found.
Any idea what would be the issue here ?
Gone through some forum , but no luck
http://www.scapaot.de/blog/?p=291
Thanks,
74KMS

Hi
Kevin Holman has a great blog on troubleshooting agent install issues here:
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
The error you state has "Manual Agent Install" as the "fix".
Could you confirm:
1. The agent is in the same domain as the SCOM Management Server?
2. Can you do an NSLookup from the Management Server to the agent FQDN?
3. If you try and install the agent manually, do you get an error or does it complete?
Cheers
Graham

Adobe AIR installation issue - hangs at "Installing..."

Hello everyone!
I know questions similar to this have been asked many times before, but I did not manage to find the solution to my problem after a few hours of reading and trying the various 'solutions' around the net and this forum. I apologise if I missed it.
I cannot seem to install Adobe AIR. I run a freshly downloaded installation executable, but it hangs at "Installing..." and 0% progress for a very, very, very long time, if I let it. This last try has been going for 45 minutes as I write. The only way to get out of the installer is through Task Manager and killing the service, as hitting 'Cancel' just makes the installer attempt to cancel endlessly.
I tried installing it in safe mode but there it gives an error saying I may not have administrative permissions (which I do have);
I created a new user account;
I "run as Administrator" and am using an account with administrative rights;
I tried it through the command line with putting the file in c:\ and running "AdobeAIRInstaller.exe -silent" without quotes from c:\;
I have shut off all my antivirus software;
I tried downloading it with a different browser;
I tried using the MicrosoftFixit.ProgramInstallUninstall, and took Adobe AIR off the list;
I tried uninstalling all Adobe products and then reinstalling them, with Adobe AIR last
... and some more things, but none of this has helped. Here's what the installation log generates when it hangs:
[2012-12-25:01:16:36] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
[2012-12-25:01:16:36] Commandline is:
[2012-12-25:01:16:36] No installed runtime detected
[2012-12-25:01:16:40] Relaunching with elevation
[2012-12-25:01:16:40] Launching subprocess with commandline c:\users\terri\appdata\local\temp\air7b85.tmp\adobe air installer.exe -ei
[2012-12-25:01:16:40] Runtime Installer begin with version 3.5.0.880 on Windows 7 x86
[2012-12-25:01:16:40] Commandline is: -stdio \\.\pipe\AIR_7668_0 -ei
[2012-12-25:01:16:40] No installed runtime detected
I would much appreciate any help or advice anyone can give me regarding this! This is starting to drive me nuts.
Thank you.
( also, this is my first post, so please forgive if I've done anything wrong or not according to etiquette! )

Ok, I understand. So before we continue, we really need to figure out what the exact error is. Can you, on at least 2 systems, generate the MSI logs we'll need? Here's a document that explains how to enable logging and where to find the logs once they've been created:
How to enable Windows logging
Once you've enabled logging, try installing again. Grab the newly created msi logs and either post here or email me at [email protected] I'll examine the logs and see if we can find a common issue between the systems.
Thanks,
Chris

Agent Installation Issue

Hi guys . While installing the agent on an asset Solaris system:
root@system: /var/tmp/OC $ /opt/SUNWxvmoc/bin/agentadm configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
agentadm: Version 12.1.2.2161 launched with args: configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : workarounds configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : db configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
Validating step : sc_console configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
verified sc_console command is OK
Validating step : setup_hmp configure -u root -p /var/tmp/OC/mypasswd
Validating step : scn_agent configure
scn_agent Common Agent Container environment is OK
Validating step : setup_net configure
skipping setup_net step for zone VC.
Validating step : uce_agent configure
Validating step : config_sysconfig configure
Validating step : final configure
End of validation
executing step : workarounds
workaround configuration done.
executing step : db
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
configuring db
INFO: hd_domain_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for Domain Model successful
configuring jobs db
INFO: hd_jobs_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for job manager successful
INFO: db decrypted the password.
executing step : sc_console
verified sc_console command is OK
Configuring sc_console
*checking existing sc_console connections
doing sc-console registration
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
CE: java.net.ConnectException: Connection timed out
Code: 10
ERROR: Connection refused.
sc-console registration failed on [10].
sc-console : Unknown error. *
It does not seem to be connecting . What seems to be the issue here and how can I resolve it ?

Hi,
it looks like the network error I had in the past. Doe haave a firewall between Client and Proxy ?
Is your client connected to more than one network ? If so it can be helpful to use the -a option.
I would check firewall andd routing.
Kind regards
tunix2k

After I clear the history I have to re-log in (even "my yahoo" homepage) to certain sites and reconfirm my identity , and videos on web sites require me to download a plug-in that was previously installed .

On the days I don't clear the history, My yahoo opens up with me logged in. Also when I go to games sites or facebook, I am logged in. Not the case after I clear the hist. Also I am required to request an ID code via email and wait for a phone call to receive it so I can access my bank account after I clear the hist. Am prompted to "click here to download a required plugin" on sites I frequent with no trouble. I click and the plugin can't be found, and no info regarding which plugin it is. First time it happened, a different site had the same problem, but my click resulted in an automatic download. This time I gave up and used IE.

Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice

IS 6 Installation issue - web server install fails

Trying to install Identity Server 6.0 on a machine (Solaris 8) with no luck. The web server package (SUNWamws) installation fails about half way thorugh. We're installing as root using JDK 1.3.1_06. This same exact distribution was used to successfully install IS 6 about 10 times over the last month or so. Now we get this..........
Extracting Upgrade Files ...
[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-jc: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-java: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-webpub: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0mld.so.1: /usr1/is6/SUNWam/servers/bin/https/bin/install-snmp: fatal: libplc4.so: open failed: No such file or directory
Killed
[0m[0msh: /usr1/is6/SUNWam/servers/bin/https/bin/install-cleanup: not found
[0m

Same problem here. Installing on new Solaris 8 machine. Used to work before. That lib appreas to be part of the Mozilla distribution if that's any help.
Donie

VMM Agent Installation Issues (Was previously installed fine, now refuses to install (ends prematurely)

Similar Messages

Maybe you are looking for