VMM Library server refresh fails with error 2910
After changing our Library structure I'm getting this error whenever I try to refresh the library share on one of our Library servers:
I have no idea why VMM tries to access a file inside userprofiles\temp. The svc_scvmm is a service account, but not the account used for communication with the library server from VMM. The correct service account is a member of the local admins, so the problem
shouldn't lie there. The file it's asking for simply doesn't exist.
Anyone have any pointers?
Hi Trond,
"Was your library share on the VMM server? VMM requires that you have a Library Server on the VMM server. If you try to remove this server through VMM, you will get an error not allowing you to do this.
If the files on the new share are the same ones that were refeshed into the old share, the library refresher should find that they have moved. Whenever the library refresher brings files under management it tags them with an ID. However
if these files were copied before they had been put into the orginal library share, they will be missing the necessary tag that identifies them as being identical and therefore not found. At this point you'll have to remove and recreate the templates.
I believe the error you are seeing is because the VMM Server account is not in the administrators group on the host machine. You could either add the account or re-add the library server using the administrator console. "
This is quoted from the following similar thread :
https://social.technet.microsoft.com/Forums/en-US/63225d77-9efe-4ecd-8903-468a7f7eb8f8/change-of-a-library-server?forum=virtualmachinemanager
Hope this is helpful to you .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
Similar Messages
-
Time Machine backups to OS X Server intermittently failing with error 21
I have a Mac Mini running OS X Server, with two USB drives connected and selected within OS X Server as Time Machine backup destinations. I have an iMac and a Macbook Air, both of which are using Time Machine to backup themselves up to the Time Machine Service on the server (all are running the latest version of Mavericks).
Intermittently, the iMac backup fails. The iMac's console log shows:
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:55:34 Nigels-iMac.local com.apple.backupd[15418]: Waiting 60 seconds and trying again.
Aug 23 13:56:06 Nigels-iMac.local mds[72]: (Normal) Volume: volume:0x7fa702995000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Backups-1
Aug 23 13:56:45 Nigels-iMac.local com.apple.backupd[15418]: Network destination already mounted at: /Volumes/Backups-1
Aug 23 13:57:29 Nigels-iMac.local com.apple.backupd[15418]: Quota in effect for '/Volumes/Backups-1': Zero KB
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Failed to eject volume /Volumes/Backups-1 (FSVolumeRefNum: -141; status: -47; dissenting pid: 0)
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Giving up after 3 retries.
Aug 23 13:58:16 Nigels-iMac.local com.apple.backupd[15418]: Backup failed with error 21: 21
The Mac Mini console log shows nothing apparently wrong.
Restarting the server (not the iMac) clears the problem and the iMac will then once again backup to the server for some time (e.g. a day).
There are two USB drives, one for each backup sparse bundle and although the two disks have different names in the Finder, OS X Server has named them both Backup (one is shown as 'Backup' and the other as 'Backup-1' in the Time Machine Services Backups tab).
I am wondering whether the failure occurs when coincidentally the iMac and the Macbook both try to back up at the same moment. Any advice about how to isolate the problem, or a solution would be gratefully received!1. This procedure is a diagnostic test, to be carried out on the server. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Move Virtual Machine from Hyper-V Server 2008 R2 SP1 to Hyper-V Server 2012 fails with Error 2901
I have six Hyper-V 2008 R2 SP1 servers and two Hyper-V 2012 servers. I am running SCVMM 2012 SP1. I am trying to use "move virtual machine" from within SCVMM to move VMs from a 2008 host to a 2012 host. I have tried different VMs on different hosts
and they all fail with this error:
==========
Error (2901)
The operation did not complete successfully because of a parameter or call sequence that is not valid.
The parameter is incorrect (0x80070057)
Recommended Action
Ensure that the parameters are valid, and then try the operation again.
==========
I have successfully created a VM on one of the 2012 hosts and moved it to the other 2012 hosts. I can move VMs from 2008 host to 2008 host. I just cannot move VMs from 2008 host to 2012 host.
Does SCVMM 2012 SP1 not support moving VMs from Hyper-V 2008 to Hyper-V 2012?Hello Kevin,
Have you got an resolution yet ? Do you have latest update roll up pack applied to SCVMM 2012 SP1?
With SCVMM 2012 SP1 " Running VMs (Live Migartion) and VMs which are in Saved state or having checkpoints can not be migrated from 2008R2 host to 2012 Host "
above was fixed in SCVMM 2012 Update Roll up 1
Apart this please check the approx. size of data (VHDs) which will get transferred over the network , If you have large files chances are more to get such errors.
Thanks
~NY -
DB02 refresh fails with "Error has occurred in JCL submission service"
In a number of our systems, we get an error when using the refresh option of the DB02 transaction. The error states that "Error has occurred in JCL submission service; see system log". We can execute the refresh successfuly in batch using DB13.
There are no messages in the SM21 system log nor the zOS system log. We also have confimred there is no authorization issue. The CCJ WLM started task is started but then no job is actually submitted to the mainframe.
Any thoughts from anyone would be most appreciated.
Thanks,
Bob Di FilippoI received an answer from Thomas Vogt from SAP on this issue. Here is his response.
"This is an error while testing the ability of SYSADM to access TSO.
The quickest workaround is to purge job JOB04711 in JES, this is the
jobid the test is using (in Germany 4711 is a 'random' meaningless
number derived from a german perfume brand). Of course we will fix
this error.
After purging the job will run from DB02 as well. As a test a have
modified SY-SUBRC in debugging mode, job REFRESH_DB02 is currently
running." -
Restart Orchestrator server service failed with error 1053
Hi,
I'm using Orchestrator 6.0. I always get an error 1053 after restart Orchestrator server service.
And no matter how many times I restart my OS, the Orchestrator server service cannot be started any longer.
Does anyone can help on this?
By the way, if I installed a vCenter server 6.0 and Orchestrator 6.0 on a same machine, Orchestrator would always get this error. But if I installed them on different machines, Orchestrator server service can running well sometimes. Is there any limitation when install vCenter server 6.0 and Orchestrator 6.0?
Thanks in advance.
VickyIs the orchestrator configurator service running? If so, log in to https://<orchestratorserver>:8283 and take a look on the configuration. If not, take a look to the logs of the vRO service and if you like, post em here.
-
Cube refresh fails with an error below
Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PMI work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM -
Trying to assign Security Baseline fails with error 24001
We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
We have followed the steps here
http://technet.microsoft.com/en-us/library/gg675110.aspx
But the job to assign the baseline fails with the following:-
Error 24001
Update server operation failed with error: The specified item could not be found in the database.
We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2Remove wsus from VMM and add it again.
This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem. -
USMT Errors - Request to SMP failed with error 0x80004005
The client I am at we are working on using USMT integrated with their OSD task sequence. Yesterday we setup a State Migration Point on the DP that is located at this office. We ran a task sequence for testing purposes that just basically does the Scan
State. The few machines we tested this task sequence on successfully completed the task.
This morning we have tried some more testing and now the task doesn't work. The job fails at the point where it is requesting user store space. The log files shows that it knows about the SMP and that it request access but it fails and continues
on trying to find another available SMP.
The first few attempts the errors are based on "Failed to connect to
\\SERVER.DOMAIN\SMPSTORED_241ADE445 (53)
"Cannot connect to http://SERVER.DOMAIN SMP root share"
"Request to SMP 'http://SERVER.DOMAIN' failed with error (Code 0x80004005) Trying next SMP.
"SMP request to 'http://server.domain" failed with error: E_SMPERROR_ENCRYPTKEY_EMPTY (103)
"ClientKeyRequestToSMP failed (0x80004005)
We have removed the SMP and have re-added it.
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.Hi,
See if this thread helps solve the problem
http://social.technet.microsoft.com/Forums/en-US/c3883768-5a49-45bc-b173-5f7eff8eca53/usmt-capture-task-sequence-failing?forum=configmanagerosd
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12
Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggestPlease run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012
Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards AkselHello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network... -
Enroll OS X client to OS X Server 3.0.2 fails with error -67693
Hi,
trying to enroll my OS X client system (10.9.1) to my OS X Server system (10.9.1/3.0.2) fails with error -67693. This happens both when trying to enroll via "server/mydevices" and via an enrollment profile created with profile manager.
Console displays the message "Cert signature reques failed with -67693":
19.01.14 20:50:31,179 mdmclient[2972]: ProcessRequestCertSignatureResponse: Cert signature request failed with -67693
19.01.14 20:50:33,695 com.apple.preferences.configurationprofiles.remoteservice[2925]: *** ERROR *** [CPInstallerUI:501] Profile installation (Entfernte Verwaltung (com.apple.config.chester.local.mdm)) (<NSOSStatusErrorDomain:-67693> Der Vorgang konnte nicht abgeschlossen werden. (OSStatus-Fehler -67693.)
UserInfo: {
CallStackSymbols = (
"0 SCEP 0x0000000102bcf40a SCEP + 9226",
"1 SCEP 0x0000000102bdc1ac SCEP + 61868",
"2 SCEP 0x0000000102bd2e97 SCEP + 24215",
"3 ConfigurationProfiles 0x00000001007f222c -[ProfileDomainPluginController installProfileWithPlugin:replacingProfile:outActions:] + 1279",
"4 ConfigurationProfiles 0x00000001007ea585 -[CPProfileManager installProfile:forUser:] + 4056",
"5 mdmclient 0x0000000100784677 mdmclient + 99959",
"6 libdispatch.dylib 0x00007fff91ea02ad _dispatch_client_callout + 8",
"7 libdispatch.dylib 0x00007fff91ea1166 _dispatch_barrier_sync_f_invoke + 39",
"8 mdmclient 0x0000000100783600 mdmclient + 95744",
"9 mdmclient 0x000000010078c914 mdmclient + 133396",
"10 mdmclient 0x0000000100787ce3 mdmclient + 113891",
"11 mdmclient 0x000000010078c54d mdmclient + 132429",
"12 mdmclient 0x0000000100788e55 mdmclient + 118357",
"13 libdispatch.dylib 0x00007fff91ea02ad _dispatch_client_callout + 8",
"14 libdispatch.dylib 0x00007fff91ea73cf _dispatch_sync_f_invoke + 39",
"15 mdmclient 0x0000000100788d85 mdmclient + 118149",
"16 mdmclient 0x00000001007891cd mdmclient + 119245",
"17 libxpc.dylib 0x00007fff95557510 _xpc_connection_call_event_handler + 58",
"18 libxpc.dylib 0x00007fff95556123 _xpc_connection_mach_event + 2124",
"19 libdispatch.dylib 0x00007fff91ea3afe _dispatch_client_callout4 + 9",
"20 libdispatch.dylib 0x00007fff91ea43b8 _dispatch_mach_msg_invoke + 143",
"21 libdispatch.dylib 0x00007fff91ea2633 _dispatch_queue_drain + 359",
"22 libdispatch.dylib 0x00007fff91ea369e _dispatch_mach_invoke + 154",
"23 libdispatch.dylib 0x00007fff91ea1fa3 _dispatch_root_queue_drain + 75",
"24 libdispatch.dylib 0x00007fff91ea3193 _dispatch_worker_thread2 + 40",
"25 libsystem_pthread.dylib 0x00007fff9287fef8 _pthread_wqthread + 314",
"26 libsystem_pthread.dylib 0x00007fff92882fb9 start_wqthread + 13"
IsInternalError = 1;
Enrolling iOS devices seems to work fine…
Any help would be appreciated!Sven luekemeier
Take a look at https://discussions.apple.com/thread/5762561?tstart=0 i hope it fixes your issue. -
Exec of OIDLDAPD Server failed with error=2
I have successfully installed OID from Oracle 9i DB for Linux (RH 7.2).
After running $ORACLE_HOME/ldap/postcfg/postcfg I've got the following output:
DB creation successful
OID Schema creation succeeded
OIDMON started
Unable to bind to the OID server
and oidmon.log is:
2002/01/31:14:54:15 Starting Monitor Process, PID=32405
2002/01/31:14:54:15 Updating Process Table...
2002/01/31:14:54:15 Starting OIDLDAPD Server, PID=32407
2002/01/31:14:54:15 Exec of OIDLDAPD Server failed with error=2
2002/01/31:14:54:16 OIDLDAPD Instance 1 added into registry
2002/01/31:14:54:26 OIDLDAPD server terminated normally
2002/01/31:14:54:26 Check log file oidldapd01.log
2002/01/31:14:54:26 Deleting OIDLDAPD instance 1 from Process table
2002/01/31:14:54:26 OIDLDAPD Instance 1 deleted from registry
There is no oidldapd01.log was created. ?????
Help !!!I am seeing the same error when I try to start oidmon and oidldap from a linux startup script. I still haven't been able to find an answer.
-
Time Machine copy failed with error:28
Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
This time, it keeps returning. I have no idea what to do:
Here's a log:
2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
"query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
"query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x585250
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 00:04:18
>
Using server: <KSOmahaServer:0x292b10
engine=<KSDaemonUpdateEngine:0x287110>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
LastActiveDate = 2012-11-25 19:27:11 +0000;
LastActivePingDate = 2012-11-26 08:00:15 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
LastActivePingDate = 2013-02-16 08:00:39 +0000;
LastActiveDate = 2013-02-16 22:57:18 +0000;
"com.google.musicmanager" = {
LastActivePingDate = 2012-07-29 06:59:48 +0000;
LastActiveDate = 2012-07-28 19:04:42 +0000;
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
server=<KSOmahaServer:0x292b10>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
server=<KSOmahaServer:0x292b10>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="53810"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x28ec80
productID=com.google.Chrome
version=24.0.1312.57
xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-18 13:11:31
tagPath=/Applications/Google Chrome.app/Contents/Info.plist
tagKey=KSChannelID
brandPath=/Library/Google/Google Chrome Brand.plist
brandKey=KSBrandID
versionPath=/Applications/Google Chrome.app/Contents/Info.plist
versionKey=KSVersion
>,
<KSTicket:0x29fe80
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 00:04:18
>
Using server: <KSOmahaServer:0x595c80
engine=<KSDaemonUpdateEngine:0x287110>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
LastActiveDate = 2012-11-25 19:27:11 +0000;
LastActivePingDate = 2012-11-26 08:00:15 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
LastActivePingDate = 2013-02-16 08:00:39 +0000;
LastActiveDate = 2013-02-16 22:57:18 +0000;
"com.google.musicmanager" = {
LastActivePingDate = 2012-07-29 06:59:48 +0000;
LastActiveDate = 2012-07-28 19:04:42 +0000;
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
server=<KSOmahaServer:0x595c80>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
server=<KSOmahaServer:0x595c80>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="53812"></daystart>
<app appid="com.google.Chrome" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28>>> Enter Time Machine and manually delete unnecessary backups to make
>>> sufficient room for new ones.
>>
>>
>> I haven't figured out how to do this. Where is this setting?
>
> I have not figured this out either. But there is a command line
> program tmutil (time machine utility) that can delete backups, and
> also do much more. I am not an expert in this area, so I can only
> suggest that you open a Terminal.app and type
> man tmutil
>
> Be careful Howard. If Time Machine is not able to delete old backup
> jobs, something is wrong with your backup disk.
If I recall correctly you do this by going on to TM and using one of the
pull down menus in the top apple menu strip ....
I myself am having problems with TM. I erased the external target disk and
started TM again. However it stops wverytime and refuses to backup ..
Telling me there isn't enough room even though the ext space is much
bigger. It also quotes the size of my HD content about 20% bigger than
finder says weird.
Howard (another one...)
============
1. Enter the time Machine
2. Scroll back it time for a few generations
3. Select the folder(s) to delete
4. Under the "Action" item (or gear icon), select the delete option you
want.
=================
> The last couple of days my Time Machine has run out of space during
> backups (error 28).
Just to be certain, is that really "28" or is it "-28"? (I assume it is
a positive error number, as error -28 is
> In the past, when I've seen this, I just say OK, and the problem goes away
> by itself, as it clears up space.
>
> My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
>
> I tried using Disk Utility to fix permissions, but those buttons were
> greyed out. Disk Utility did not find any problem with the disk.
Repair Permissions is not relevant for Time Machine backups. It only
repairs permissions on files installed by the OS X Installer application
(or the OS installation or preinstalled OS, or Software Update). TM
backups don't qualify.
In any case, Time Machine deletes old backups using root privileges so
it doesn't care about permissions on the backup drive.
> Time Machie preferences show 13.3 GB of 1 TB available.
>
> I haven't been adding stuff to my computer lately more than getting
> mail.
>
> Oldest backup: December 29, 2012
> Latest backup: February 15, 2013
>
> Excluded from backups is the backup drive, my downloads folder, and my
> Mobile Documents folder.
>
> Estimated size of full backup 397.5 GB
Something odd is happening here. Given your described usage, you should
not be chewing through 1 TB of backups in less than three months. I've
gone more than a year on a drive with a similar ratio and not filled it
(and I am backing up my downloads, sometimes two or three times as I
move them to other folders).
Has anything major been done to the computer within that timeframe, e.g.
installing a new hard drive, or erasing the main drive and restoring
from backup? If so, that drive is treated as a new one and would require
another full backup, leaving the old one there.
A similar possibility is if Time Machine thought the computer had been
replaced, which would result in a new backup being started, and would
also leave the old backup unable to be deleted automatically.
In this case, you wouldn't be able to directly access the backups prior
to the change using "Enter Time Machine", but could get to them by
holding down the Option key and choosing "Browse Other Backup Disks"
from the Time Machine menu.
> What suggestions do you have for me to resolve this issue.
Which OS X version are you running?
Have a look in system.log (using Console) to see if Time Machine logged
any relevant information when the backup failed. Look for references to
"backupd" (which is the background software which does Time Machine
backups).
============= -
Client install fails with Error 0x87d00280 on ccmsetup log file
CAS and Primary Server are on Server 2012 R2, Clients are Win 7 and Server 2008 R2 in
same Domain. Primary Server has DP and MP installed, I can successfully install client from my Primary Server through Client Push Installation. I don't see any errors on SCCM Console.
On the client side I can see C:\Windows\ccmsetup\ccmsetup.exe is installed and the "ccmsetup"
Service is not in running status.
When I checked the ccmsetup log file, the latest error message says - Have already tried all
MPs, Couldn't find DP locations. Also another line says - The Certificate Selection Criteria was not specified. There are no Certificates in "MY" store.
Do I need to install self signed Certificate through MMC snap-ins, DNS issue or I am missing
something, Please help!
Angur J Patelis your MP set to https ? seems like its certificates issue. You can go through the documentation
https://technet.microsoft.com/en-us/library/gg682023.aspx? on how to setup PKI in sccm 2012 to check if you have created certificates as needed .
this might help you http://jackstromberg.com/2014/09/system-center-2012-r2-configuration-manager-ccmsetup-failed-with-error-code-0x87d00280/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr -
CreateTsMedia failed with error 0x80070002
Trying to create a task sequence media "capture media" and its failing. I have trying a ton of things. The key errors are below including the entire log. How do I fix this? Frustrating!
server 2008 r2
sccm 2012 R2 CU1
I have removed the boot package and recreated it. ADK 8.1 is install on local computer. MDK 2013 is also install on local computer.
![LOG[Resources file not found in toolkit.
The system cannot find the file specified. (Error: 80070002; Source: Windows)]LOG]!><time="20:29:28.656+240" date="09-09-2014" component="CreateTsMedia" context="" type="3" thread="21452"
file="mediatoolkit.cpp:173">
<![LOG[Failed to create media generator (0x80070002)]LOG]!><time="20:29:28.656+240" date="09-09-2014" component="CreateTsMedia" context="" type="3" thread="21452" file="createtsmedia.cpp:342">
<![LOG[CreateTsMedia failed with error 0x80070002, details='']LOG]!><time="20:29:28.656+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="createtsmedia.cpp:355">
<![LOG[ ===============================================================]LOG]!><time="20:28:38.564+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872"
file="createmedia.cpp:979">
<![LOG[Begin media creation: ]LOG]!><time="20:28:38.565+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:980">
<![LOG[Media: capture]LOG]!><time="20:28:38.567+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:267">
<![LOG['Provider'=nasd-sql1.nasd.local]LOG]!><time="20:28:38.567+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:208">
<![LOG['Site Code'=NAZ]LOG]!><time="20:28:38.567+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:208">
<![LOG['Distribution Points(s)'=NASD-SCCM-DP.NASD.LOCAL]LOG]!><time="20:28:38.567+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:208">
<![LOG['Boot Image Package ID'=NAZ00097]LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:208">
<![LOG['Physical Media Type'=UFD+FORMAT]LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:208">
<![LOG['Media Destination'=F:\]LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:208">
<![LOG[Media label: 'Configuration Manager 2012']LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:1025">
<![LOG[Creating media from Admin Console]LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:1029">
<![LOG[COMMAND LINE: ]LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:929">
<![LOG[CreateMedia.exe /K:capture /N:**** /P:nasd-sql1.nasd.local /S:NAZ /C:**** /D:NASD-SCCM-DP.NASD.LOCAL /L:Configuration Manager 2012 /B:NAZ00097 /T:UFD+FORMAT /F:F:\ ]LOG]!><time="20:28:38.568+240" date="09-09-2014"
component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:930">
<![LOG[Another thread has been started to create TS media]LOG]!><time="20:28:38.568+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="createmedia.cpp:589">
<![LOG[======= CreateCaptureMedia invoked =======]LOG]!><time="20:28:38.569+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="createtsmedia.cpp:1207">
<![LOG[---------------------------- CreateTsMedia ----------------------------]LOG]!><time="20:28:38.569+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452"
file="createtsmedia.cpp:245">
<![LOG[Requested output path: F:\ (UFD+FORMAT)]LOG]!><time="20:28:38.569+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="createtsmedia.cpp:267">
<![LOG[Total number of TS variables: 0]LOG]!><time="20:28:38.569+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="createtsmedia.cpp:106">
<![LOG[Temporary directory 'C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_21452' created, free space on drive 'C:' is 3925 MB]LOG]!><time="20:28:38.570+240" date="09-09-2014" component="CreateTsMedia" context=""
type="1" thread="21452" file="tempdirectory.cpp:87">
<![LOG[Opened WMI namespace '\\nasd-sql1.nasd.local\root\SMS\site_NAZ' ]LOG]!><time="20:28:38.641+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="mediafactory.cpp:924">
<![LOG[Local computer is MTIT7230]LOG]!><time="20:28:38.664+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="utils.cpp:384">
<![LOG[Package manager created successfully]LOG]!><time="20:28:38.665+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="mediafactory.cpp:408">
<![LOG[Local computer is MTIT7230]LOG]!><time="20:28:38.666+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="utils.cpp:384">
<![LOG[Creating policy manager]LOG]!><time="20:28:38.666+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="mediafactory.cpp:444">
<![LOG[Setting up Install Toolkit]LOG]!><time="20:28:38.666+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="mediatoolkit.cpp:214">
<![LOG[Copying package NAZ00097 to C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_21452\Cache]LOG]!><time="20:28:38.787+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452"
file="packagemgr.cpp:334">
<![LOG[Retrieving info for package NAZ00097.6]LOG]!><time="20:28:38.788+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="packagemgr.cpp:1042">
<![LOG[Content library is on remote system 'NASD-SCCM-DP.NASD.LOCAL']LOG]!><time="20:28:39.576+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="utils.cpp:617">
<![LOG[Connected to remote registry service on 'NASD-SCCM-DP.NASD.LOCAL']LOG]!><time="20:28:39.660+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="utils.cpp:691">
<![LOG[Content Library: Local Path='E:\SCCMContentLib', Remote Path='\\NASD-SCCM-DP.NASD.LOCAL\SCCMContentLib$', File Library Usable Drives='E:\,C:\']LOG]!><time="20:28:39.690+240" date="09-09-2014" component="CreateTsMedia"
context="" type="1" thread="21452" file="utils.cpp:830">
<![LOG[Registering package NAZ00097.6 with content at \\NASD-SCCM-DP.NASD.LOCAL\SCCMContentLib$]LOG]!><time="20:28:40.018+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452"
file="packagemgr.cpp:591">
<![LOG[VerifyContentHash: Hash algorithm is 32780]LOG]!><time="20:29:23.140+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="downloadcontent.cpp:1829">
<![LOG[Hash value of package NAZ00097 is verified]LOG]!><time="20:29:28.373+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="packagemgr.cpp:494">
<![LOG[ADK installation root registry value not found.]LOG]!><time="20:29:28.375+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="wimfile.cpp:197">
<![LOG[Loaded C:\Windows\system32\wimgapi.dll]LOG]!><time="20:29:28.375+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="wimfile.cpp:334">
<![LOG[Opening image file C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_21452\Cache\NAZ00097\boot.NAZ00097.wim]LOG]!><time="20:29:28.375+240" date="09-09-2014" component="CreateTsMedia" context="" type="1"
thread="21452" file="wimfile.cpp:412">
<![LOG[Applying image 1 to volume C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_21452\Toolkit]LOG]!><time="20:29:28.585+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452"
file="wimfile.cpp:603">
<![LOG[Closing image file C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_21452\Cache\NAZ00097\boot.NAZ00097.wim]LOG]!><time="20:29:28.651+240" date="09-09-2014" component="CreateTsMedia" context="" type="1"
thread="21452" file="wimfile.cpp:448">
<![LOG[Resources file not found in toolkit.
The system cannot find the file specified. (Error: 80070002; Source: Windows)]LOG]!><time="20:29:28.656+240" date="09-09-2014" component="CreateTsMedia" context="" type="3" thread="21452"
file="mediatoolkit.cpp:173">
<![LOG[Failed to create media generator (0x80070002)]LOG]!><time="20:29:28.656+240" date="09-09-2014" component="CreateTsMedia" context="" type="3" thread="21452" file="createtsmedia.cpp:342">
<![LOG[CreateTsMedia failed with error 0x80070002, details='']LOG]!><time="20:29:28.656+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="21452" file="createtsmedia.cpp:355">
<![LOG[Media creation process that was started from Admin Console completed.
]LOG]!><time="20:29:28.737+240" date="09-09-2014" component="CreateTsMedia" context="" type="1" thread="5872" file="createmedia.cpp:1065">
<![LOG[CreateMedia.exe finished with error code 80070002]LOG]!><time="20:29:28.737+240" date="09-09-2014" component="CreateTsMedia" context="" type="2" thread="5872" file="createmedia.cpp:1123">I did intergrate MDT 2013 with configmgr on the server and on my workstation
I did a full install of ADK 8.1 and also tried ADK 8.0.
ADK 8.1 is installed on the Site server.
SAme problem.
<![LOG[======= CreateCaptureMedia invoked =======]LOG]!><time="11:32:51.280+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="createtsmedia.cpp:1207">
<![LOG[---------------------------- CreateTsMedia ----------------------------]LOG]!><time="11:32:51.281+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324"
file="createtsmedia.cpp:245">
<![LOG[Requested output path: J:\ (UFD+FORMAT)]LOG]!><time="11:32:51.281+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="createtsmedia.cpp:267">
<![LOG[Total number of TS variables: 0]LOG]!><time="11:32:51.281+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="createtsmedia.cpp:106">
<![LOG[Temporary directory 'C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_1324' created, free space on drive 'C:' is 3796 MB]LOG]!><time="11:32:51.282+240" date="09-13-2014" component="CreateTsMedia" context=""
type="1" thread="1324" file="tempdirectory.cpp:87">
<![LOG[Opened WMI namespace '\\nasd-sql1.nasd.local\root\SMS\site_NAZ' ]LOG]!><time="11:32:51.357+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="mediafactory.cpp:924">
<![LOG[Local computer is MTIT7230]LOG]!><time="11:32:51.381+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="utils.cpp:384">
<![LOG[Package manager created successfully]LOG]!><time="11:32:51.381+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="mediafactory.cpp:408">
<![LOG[Local computer is MTIT7230]LOG]!><time="11:32:51.383+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="utils.cpp:384">
<![LOG[Creating policy manager]LOG]!><time="11:32:51.383+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="mediafactory.cpp:444">
<![LOG[Setting up Install Toolkit]LOG]!><time="11:32:51.383+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="mediatoolkit.cpp:214">
<![LOG[Copying package NAZ0009B to C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_1324\Cache]LOG]!><time="11:32:51.500+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324"
file="packagemgr.cpp:334">
<![LOG[Retrieving info for package NAZ0009B.3]LOG]!><time="11:32:51.500+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="packagemgr.cpp:1042">
<![LOG[Content library is on remote system 'NASD-SCCM-DP.NASD.LOCAL']LOG]!><time="11:32:52.221+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="utils.cpp:617">
<![LOG[Connected to remote registry service on 'NASD-SCCM-DP.NASD.LOCAL']LOG]!><time="11:32:52.287+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="utils.cpp:691">
<![LOG[Content Library: Local Path='E:\SCCMContentLib', Remote Path='\\NASD-SCCM-DP.NASD.LOCAL\SCCMContentLib$', File Library Usable Drives='E:\,C:\']LOG]!><time="11:32:52.316+240" date="09-13-2014" component="CreateTsMedia"
context="" type="1" thread="1324" file="utils.cpp:830">
<![LOG[Registering package NAZ0009B.3 with content at \\NASD-SCCM-DP.NASD.LOCAL\SCCMContentLib$]LOG]!><time="11:32:52.669+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324"
file="packagemgr.cpp:591">
<![LOG[VerifyContentHash: Hash algorithm is 32780]LOG]!><time="11:34:25.934+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="downloadcontent.cpp:1870">
<![LOG[Hash value of package NAZ0009B is verified]LOG]!><time="11:34:32.496+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="packagemgr.cpp:494">
<![LOG[ADK installation root registry value not found.]LOG]!><time="11:34:32.497+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="wimfile.cpp:207">
<![LOG[Loaded C:\Windows\system32\wimgapi.dll]LOG]!><time="11:34:32.497+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="wimfile.cpp:344">
<![LOG[Opening image file C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_1324\Cache\NAZ0009B\boot.NAZ0009B.wim]LOG]!><time="11:34:32.498+240" date="09-13-2014" component="CreateTsMedia" context="" type="1"
thread="1324" file="wimfile.cpp:422">
<![LOG[Applying image 1 to volume C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_1324\Toolkit]LOG]!><time="11:34:32.713+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324"
file="wimfile.cpp:613">
<![LOG[Closing image file C:\Users\MFAHEY~1.NAS\AppData\Local\Temp\_tsmedia_1324\Cache\NAZ0009B\boot.NAZ0009B.wim]LOG]!><time="11:34:32.770+240" date="09-13-2014" component="CreateTsMedia" context="" type="1"
thread="1324" file="wimfile.cpp:458">
<![LOG[Resources file not found in toolkit.
The system cannot find the file specified. (Error: 80070002; Source: Windows)]LOG]!><time="11:34:32.775+240" date="09-13-2014" component="CreateTsMedia" context="" type="3" thread="1324"
file="mediatoolkit.cpp:173">
<![LOG[Failed to create media generator (0x80070002)]LOG]!><time="11:34:32.775+240" date="09-13-2014" component="CreateTsMedia" context="" type="3" thread="1324" file="createtsmedia.cpp:342">
<![LOG[CreateTsMedia failed with error 0x80070002, details='']LOG]!><time="11:34:32.775+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="1324" file="createtsmedia.cpp:355">
<![LOG[Media creation process that was started from Admin Console completed.
]LOG]!><time="11:34:32.868+240" date="09-13-2014" component="CreateTsMedia" context="" type="1" thread="8832" file="createmedia.cpp:1065">
<![LOG[CreateMedia.exe finished with error code 80070002]LOG]!><time="11:34:32.868+240" date="09-13-2014" component="CreateTsMedia" context="" type="2" thread="8832" file="createmedia.cpp:1123">
Maybe you are looking for
-
Catching the exception thrown in a java class on a JSP front end
I have a web service created in JAVA.. The modules throw certain exceptions and i am having auto generated JSP created from the WSDL's , which i can obviously edit. i want to catch these exceptions in this JSP page.. Any clue how to do this? Thanks.
-
How do I launch this program??
-
Why can't I load Candy Crush Saga on facebook? Help me please?
I have just downloaded and installed firefox, but I cannot load Candy Crush Saga although it works well with other games on facebook. I do not know why. At the first time, firefox informed me that it lacked the updated flash player, so i installed th
-
Printing sapscript form out of ABAP report
Hello, I was wondering if there is a way to trigger the print output of a sapscript form out of an ABAP report? Maybe some kind of function module? Thanks Anne
-
Does dv always import automatically in full quality? I know that the viewer canvas is not full quality but when i export from the timeline as a quicktime dv pal movie the quicktime movie also doesn't look like full quality. Does working on a macbook