VMS 2.2 import configs from routers setup by CSPM 3.0

Our VPN routers all have more than one Pre-shared key, one for each VPN partner router. I read that VMS 2.2 only supports one preshared key on import. How then to I setup the routers to have more than one VPN partner? Do I have to use the same preshared key even if one router has multiple spokes and some of those spokes acutally act as hubs themselves?

To the best of my knowledge, Management Center for VPN Routers 1.1 allows different keys to be specified. For more information on setting up the same, please see the documentation at http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/cw2000_b/vpnman/vms_2_1/rmc1_1/user_gd/index.htm

Similar Messages

How to import config from 4404 WLC to WLC 5508

Hi all
In one week I need to import the config from my 4404 WLC to my new 5508, then I just want to change the mgnt IP address of the 5508 and then bring it into the same mobility group.
How do I import the config when the 5508 is straight out of the box?
Many thanks
Carl

Heck!!!!
This is unfortunately correct as per the doc you provided! :-(
I am already aware that there are some commands and features differs among different platforms but I thought Cisco passed this barrier by making WLC platform chooses appropriate commands from config file and ignore commands that does not suite importing platform!! but it does not seem to be correct!!!!!
I think if backup config file has only features that another platform support then config restore would possibly work.
But if config file has commands that considered unknown to the importing platform then here the problem may reside!
Surendra: do you know what are the consequences of doing this unsupported scenario of moving backup config amont different platforms?
I think Carl can try restoration process anyway and if does not work he can go to manual configuraiton then. But he is still have the chance of getting the config restored correctly.

Error from iTunes Setup Asst -- iTunes cannot locate the CD Config folder

It says: iTunes cannot locate the CD Configuration folder, so you cannot import or burn CDs and DVD's. This folder must be in the same directory as iTunes.
Because of space issues, I moved iTunes to run off of a portable hard drive (it's a silver iomega 100 GB drive, if it matters). I had to uninstall and reinstall iTunes and import the old library into iTunes to get it to work, but now it's giving me the error.
I just imported music from a disc, so that works actually, but when I try to burn a disc, it says "disc burner or software not found." I'm flummoxed.
Diagnostics are below:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D820
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: NVIDIA Quadro NVS 110M \GeForce Go 7300
IDE\DiskST980825AS_____________________________8.02___, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskHTS421210H9AT00_______0000, Bus Type USB
IDE\CdRomSONYDVD+-RW_DW-Q58A____________________UDS2___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
Failed while scanning for CD / DVD drives, error 2500.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
Any help anyone could provide would be much appreciated.
Dell Latitude D820 Windows XP

Howdy beanettejurke,
The article linked below provides troubleshooting tips that’ll resolve optical drive issues, like the CD alert you’re seeing when launching iTunes on your PC.
iTunes for Windows: Troubleshooting CD issues caused by device filters - Apple Support
Cheers,
-Jason

10.6.8 stops me importing photos from Olympus camera

1. Recently bought a new Olympus VR310 digital camera. I couldn't get either Image Capture (6.0.1) or iPhoto (9.1.5) to import images from day one, onto my Mac Mini running Snow Leopard 10.6.8. However, if I took the SDHC card out of the Olympus and put it into an older Canon Ixus digital camera , and used that to upload, then both Image Capture and iPhoto worked perfectly. So it's not the card. Or the USB connection. It's something special to the Olympus and the Mac. Obviously I tried all the usual stuff about dumping plist files etc. Nothing worked.
2. The problem manifests itself, when the Olympus is connected, as Image Capture being unable to show more than one, if any, thumbnails, and it is unable to import at all. In iPhoto the problem manifests immediately it calls up the Olympus as a connected camera. The dreaded spinning beachball of death kicks off, and the program 'stops responding'. Even after I quit iPhoto and unmount the Olympus, iPhoto will not open without the spinning ball of death until I restart.
3. Anyway, I tried connecting the Olympus to my son's Macbook, (System 10.6.7, Image Capture 6.0.1 and iPhoto 9.1.1) and all worked perfectly. Hmm… so it's NOT just down to the Olympus. It's something to do with my setup.
4. I also have a bootable USB drive connected to the Mini, so I booted into that, so I then have my computer and my user preferences etc running under the bootable drives System 10.6.6, Image Capture 6.0.1, and iPhoto 9.1.5. That worked perfectly with the Olympus too. So it's not my the combination of my user settings, Image Capture 6.0.1, or iPhoto 9.15, or the Olympus.
5. My guess then was it was some corruption of the system on the Mac Mini. So I reinstalled the Mac Mini system, from the install DVD, so I had a nice fresh Snow Leopard 10.6.0. That gave me Image Capture 6.0.1 and iPhoto 9.1.5. When I attached the Olympus, everything worked perfectly. Great.
THEN, I updated the system from Apple's Oftware Update, all the way to 10.6.8, which is where I started from.
6. And guess what. Nothing works anymore. Immediately before the update, the Olympus importing worked. Immediately afterwards it didn't. I'm back where I was at the beginning, with exactly the same problem.. I can't import from the Olympus but the Canon is fine. (see 1 and 2 above)
So, it seems to me that the Upgrade straight to 10.6.8 is what caused the problem. And given I could get the Olympus to work on my son's computer (system 10.6.6) it's something between 10.6.6 and 10.6.8. Why the Canon works on all the permutations, and not the Olympus, I don't know. I don't know why the Olympus ONLY doesn't work with 10.6.8.
7. Obviously there are tedious workarounds (but none that lets iPhoto capture the photos directly) which I can use to get the images into iPhoto eventually, but hey, this is an Apple Mac, who wants to be doing tedious workarounds all the time.
I've had Macs since 1984 (I'm that old…) so I'm a fan, and I'm reasonably competent, but this has me stumped.
Any ideas, anyone.
Any help much appreciated.
Ian Waterston

You launched iPhoto and from its Preferences you selected Connecting camera opens.....

Upgraded to 10.6.8 and now can't import photos from Olympus camera

1. Recently bought a new Olympus VR310 digital camera. I couldn't get either Image Capture (6.0.1) or iPhoto (9.1.5) to import images from day one, onto my Mac Mini running Snow Leopard 10.6.8. However, if I took the SDHC card out of the Olympus and put it into an older Canon Ixus digital camera , and used that to upload, then both Image Capture and iPhoto worked perfectly. So it's not the card. Or the USB connection. It's something special to the Olympus and the Mac. Obviously I tried all the usual stuff about dumping plist files etc. Nothing worked.
2. The problem manifests itself, when the Olympus is connected, as Image Capture being unable to show more than one, if any, thumbnails, and it is unable to import at all. In iPhoto the problem manifests immediately it calls up the Olympus as a connected camera. The dreaded spinning beachball of death kicks off, and the program 'stops responding'. Even after I quit iPhoto and unmount the Olympus, iPhoto will not open without the spinning ball of death until I restart.
3. Anyway, I tried connecting the Olympus to my son's Macbook, (System 10.6.7, Image Capture 6.0.1 and iPhoto 9.1.1) and all worked perfectly. Hmm… so it's NOT just down to the Olympus. It's something to do with my setup.
4. I also have a bootable USB drive connected to the Mini, so I booted into that, so I then have my computer and my user preferences etc running under the bootable drives System 10.6.6, Image Capture 6.0.1, and iPhoto 9.1.5. That worked perfectly with the Olympus too. So it's not my the combination of my user settings, Image Capture 6.0.1, or iPhoto 9.15, or the Olympus.
5. My guess then was it was some corruption of the system on the Mac Mini. So I reinstalled the Mac Mini system, from the install DVD, so I had a nice fresh Snow Leopard 10.6.0. That gave me Image Capture 6.0.1 and iPhoto 9.1.5. When I attached the Olympus, everything worked perfectly. Great.
THEN, I updated the system from Apple's Oftware Update, all the way to 10.6.8, which is where I started from.
6. And guess what. Nothing works anymore. Immediately before the update, the Olympus importing worked. Immediately afterwards it didn't. I'm back where I was at the beginning, with exactly the same problem.. I can't import from the Olympus but the Canon is fine. (see 1 and 2 above)
So, it seems to me that the Upgrade straight to 10.6.8 is what caused the problem. And given I could get the Olympus to work on my son's computer (system 10.6.6) it's something between 10.6.6 and 10.6.8. Why the Canon works on all the permutations, and not the Olympus, I don't know. I don't know why the Olympus ONLY doesn't work with 10.6.8.
7. Obviously there are tedious workarounds (but none that lets iPhoto capture the photos directly) which I can use to get the images into iPhoto eventually, but hey, this is an Apple Mac, who wants to be doing tedious workarounds all the time.
I've had Macs since 1984 (I'm that old…) so I'm a fan, and I'm reasonably competent, but this has me stumped.
Any ideas, anyone.
Any help much appreciated.
Ian Waterston

You launched iPhoto and from its Preferences you selected Connecting camera opens.....

How to load a config from one appliance and publish it to both

Hi,
We're using AsyncOS7.5 on two WebAppliances S360 with a
Configuration Master 7.5 (M160).
I used one of both appliances to implement URL Filtering and now I'd like to transfer
this coniguration to the the master in order to publish it to both appliances.
As I could see it doesn't appear to be possible to load the config from one
specific appliance.
How can I do that the best?
Any hints?
Thanks
Jannis

Jannis,
You can import the config file from the WSA which URL filtering has been configured to the M160 in Configuration Master 7.5. This will wipe out the current configuration master 7.5 stored in the M160, and you can then publish the same config to the other WSA.
Check the online help for section "Initializing and Importing Configuration Masters"
Hope this helps.
- donny

OIA-OIM Integration, Error while trying to import users from OIM to OIA

Hi Experts,
I have used depreciation method to integrate OIA 11gR1 with OIM 9.1.0.2 BP13.
When I am trying to import Users from OIM to OIA, I am getting the following error: " failed reading the magic number mapping file"
Here are logs. Can anyone tell me what is this error about?
12:28:33,000 DEBUG [QuartzJobListener] OIM1: job about to be executed
12:28:33,000 DEBUG [IAMJob] ******* executing job OIM1 *******
12:28:33,000 INFO [DefaultRemoter] Exec: dwrSchedulerService.getJobStatus()
12:28:33,000 DEBUG [DefaultRemoter] --Object created, not stored. id=0
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): throw 'allowScriptTagRemoting is false.';
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): //#DWR-INSERT
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): //#DWR-REPLY
12:28:33,000 DEBUG [DebuggingPrintWriter] out(46): var s0={};var s1={};s0.currentCount=0;s0.groupName="IAM";s0.job=null;s0.jobName="OIM1";s0.jobStatusId=null;s0.jobType="Import/Export Progress";s0.lastAccessedTime=0;s0.launcher=null;s0.monitorMap=s1;s0.status=1;s0.timeElapsed=0;s0.totalCount=0;
dwr.engine._remoteHandleCallback('20','0',[s0]);
12:28:33,015 DEBUG [IAMJob] ---> executing job 'OIM1' using IAMJobExecutor
12:28:33,015 DEBUG [IAMJobExecutor] found valid iam service
12:28:33,015 DEBUG [IAMJobExecutor] looking for iam server connection 'OIM1'
12:28:33,031 DEBUG [IAMJobExecutor] ----> adding connection defined in config files [dbIAMConnection, fileIAMConnection]
12:28:33,031 DEBUG [IAMJobExecutor] found 3 iam server connections
12:28:33,031 DEBUG [IAMJobExecutor] checking iam server connection 'OIM1'
12:28:33,031 DEBUG [IAMJobExecutor] found matching iam server connection 'OIM1'
12:28:33,031 DEBUG [IAMJobExecutor] found valid iam server OIM1
12:28:33,031 DEBUG [IAMJobExecutor] IAM action specified is ACTION_IMPORT_USERS[2]
12:28:33,031 DEBUG [OIMIAMSolution] In Read Users ...
12:28:33,031 DEBUG [OIMIAMSolution] publishing import starting event...
12:28:33,031 DEBUG [OIMIAMSolution] Starting import run id ---> null
12:28:33,031 DEBUG [OIMIAMSolution] Trying to establish a connection with OIM Server...
12:28:33,031 DEBUG [OIMIAMSolution] ************** OIM Connection Params *************
12:28:33,031 DEBUG [OIMIAMSolution] XL Home ---> E:\Middleware10G_Home\xellerate
12:28:33,031 DEBUG [OIMIAMSolution] login config ---> E:\Middleware10G_Home\xellerate\config\auth.config
12:28:33,031 DEBUG [OIMIAMSolution] Naming Factory Initial ---> : weblogic.jndi.WLInitialContextFactory
12:28:33,031 DEBUG [OIMIAMSolution] Provider URL --> t3://vkalyan-in:7001
12:28:33,031 DEBUG [OIMIAMSolution] ****************************************************
12:28:33,031 DEBUG [OIMIAMSolution] ********** Connecting to OIM Server **********
12:28:33,031 DEBUG [DefaultIAMListener] storing new ImportRun
12:28:33,109 DEBUG [SrmIndexDaemon] Checking Imports or Re-Indexing Activity...
12:28:33,109 INFO [SrmIndexDaemon] Imports or Re-Indexing are Running. Stopping online indexing
12:28:33,156 ERROR [JobRunShell] Job IAM.OIM1 threw an unhandled Exception:
java.lang.ExceptionInInitializerError
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:46)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.jgroups.stack.ProtocolStack.<init>(ProtocolStack.java:88)
at org.jgroups.JChannel.init(JChannel.java:1568)
at org.jgroups.JChannel.<init>(JChannel.java:257)
at org.jgroups.JChannel.<init>(JChannel.java:240)
at org.jgroups.blocks.NotificationBus.<init>(NotificationBus.java:69)
at com.opensymphony.oscache.plugins.clustersupport.JavaGroupsBroadcastingListener.initialize(JavaGroupsBroadcastingListener.java:113)
at com.opensymphony.oscache.base.AbstractCacheAdministrator.configureStandardListeners(AbstractCacheAdministrator.java:328)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.createCache(GeneralCacheAdministrator.java:305)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.<init>(GeneralCacheAdministrator.java:99)
at com.thortech.xl.cache.OSCacheProvider.initialize(Unknown Source)
at com.thortech.xl.cache.CacheFactory.getCacheProvider(Unknown Source)
at com.thortech.xl.cache.CacheUtil.<clinit>(Unknown Source)
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy116.importUsers(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: org.jgroups.ChannelException: failed reading the magic number mapping file
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:101)
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:43)
... 38 more
Caused by: java.io.IOException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:89)
at org.jgroups.conf.MagicNumberReader.parse(MagicNumberReader.java:69)
at org.jgroups.conf.MagicNumberReader.readMagicNumberMapping(MagicNumberReader.java:57)
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:73)
... 39 more
Caused by: java.lang.NullPointerException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:84)
... 42 more
12:28:33,156 ERROR [ErrorLogger] Job (IAM.OIM1 threw an exception.
org.quartz.SchedulerException: Job threw an unhandled exception. [See nested exception: java.lang.ExceptionInInitializerError]
at org.quartz.core.JobRunShell.run(JobRunShell.java:213)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: java.lang.ExceptionInInitializerError
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:46)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.jgroups.stack.ProtocolStack.<init>(ProtocolStack.java:88)
at org.jgroups.JChannel.init(JChannel.java:1568)
at org.jgroups.JChannel.<init>(JChannel.java:257)
at org.jgroups.JChannel.<init>(JChannel.java:240)
at org.jgroups.blocks.NotificationBus.<init>(NotificationBus.java:69)
at com.opensymphony.oscache.plugins.clustersupport.JavaGroupsBroadcastingListener.initialize(JavaGroupsBroadcastingListener.java:113)
at com.opensymphony.oscache.base.AbstractCacheAdministrator.configureStandardListeners(AbstractCacheAdministrator.java:328)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.createCache(GeneralCacheAdministrator.java:305)
at com.opensymphony.oscache.general.GeneralCacheAdministrator.<init>(GeneralCacheAdministrator.java:99)
at com.thortech.xl.cache.OSCacheProvider.initialize(Unknown Source)
at com.thortech.xl.cache.CacheFactory.getCacheProvider(Unknown Source)
at com.thortech.xl.cache.CacheUtil.<clinit>(Unknown Source)
at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
at Thor.API.tcUtilityFactory.<init>(Unknown Source)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy116.importUsers(Unknown Source)
at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
... 1 more
Caused by: org.jgroups.ChannelException: failed reading the magic number mapping file
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:101)
at org.jgroups.conf.ClassConfigurator.<clinit>(ClassConfigurator.java:43)
... 38 more
Caused by: java.io.IOException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:89)
at org.jgroups.conf.MagicNumberReader.parse(MagicNumberReader.java:69)
at org.jgroups.conf.MagicNumberReader.readMagicNumberMapping(MagicNumberReader.java:57)
at org.jgroups.conf.ClassConfigurator.init(ClassConfigurator.java:73)
... 39 more
Caused by: java.lang.NullPointerException
at org.jgroups.conf.MagicNumberReader.parseClassData(MagicNumberReader.java:84)
... 42 more
12:28:33,156 DEBUG [QuartzJobListener] OIM1: job was executed
12:28:33,156 DEBUG [VaauSchedulerEventListenerImpl] Processing VaauSchedulerEvent
12:28:33,156 INFO [VaauSchedulerEventListenerImpl] Job executed: OIM1, IAM
12:28:33,156 INFO [VaauSchedulerEventListenerImpl] Job run time: 0s
12:28:33,156 INFO [VaauSchedulerEventListenerImpl] Next Run: null
Regards
Kalyan

I solved the above error by removing oscache***.jar file and keeping only oscache.jar in lib directory.
However I am getting some other error this time. Let me know if you have any suggestions:
11:27:08,015 DEBUG [QuartzJobListener] job1: job about to be executed
11:27:08,015 DEBUG [IAMJob] ******* executing job job1 *******
11:27:08,046 DEBUG [IAMJob] ---> executing job 'job1' using IAMJobExecutor
11:27:08,046 DEBUG [IAMJobExecutor] found valid iam service
11:27:08,046 DEBUG [IAMJobExecutor] looking for iam server connection 'OIM1'
11:27:08,078 DEBUG [IAMJobExecutor] ----> adding connection defined in config files [dbIAMConnection, fileIAMConnection]
11:27:08,078 DEBUG [IAMJobExecutor] found 3 iam server connections
11:27:08,078 DEBUG [IAMJobExecutor] checking iam server connection 'OIM1'
11:27:08,078 DEBUG [IAMJobExecutor] found matching iam server connection 'OIM1'
11:27:08,078 DEBUG [IAMJobExecutor] found valid iam server OIM1
11:27:08,078 DEBUG [IAMJobExecutor] IAM action specified is ACTION_IMPORT_USERS[2]
11:27:08,078 DEBUG [OIMIAMSolution] In Read Users ...
11:27:08,078 DEBUG [OIMIAMSolution] publishing import starting event...
11:27:08,078 DEBUG [OIMIAMSolution] Starting import run id ---> null
11:27:08,078 DEBUG [OIMIAMSolution] Trying to establish a connection with OIM Server...
11:27:08,078 DEBUG [OIMIAMSolution] ************** OIM Connection Params *************
11:27:08,078 DEBUG [OIMIAMSolution] XL Home ---> E:\Middleware10G_Home\xellerate
11:27:08,078 DEBUG [OIMIAMSolution] login config ---> E:\Middleware10G_Home\xellerate\config\auth.config
11:27:08,078 DEBUG [OIMIAMSolution] Naming Factory Initial ---> : weblogic.jndi.WLInitialContextFactory
11:27:08,078 DEBUG [OIMIAMSolution] Provider URL --> t3://vkalyan-in:7001
11:27:08,078 DEBUG [OIMIAMSolution] ****************************************************
11:27:08,078 DEBUG [OIMIAMSolution] ********** Connecting to OIM Server **********
11:27:08,078 DEBUG [DefaultIAMListener] storing new ImportRun
11:27:08,156 INFO [DefaultRemoter] Exec: dwrSchedulerService.getJobStatus()
11:27:08,156 DEBUG [DefaultRemoter] --Object created, not stored. id=0
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): throw 'allowScriptTagRemoting is false.';
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): //#DWR-INSERT
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): //#DWR-REPLY
11:27:08,156 DEBUG [DebuggingPrintWriter] out(35): var s0={};var s1={};s0.currentCount=0;s0.groupName="IAM";s0.job=null;s0.jobName="job1";s0.jobStatusId=null;s0.jobType="Import/Export Progress";s0.lastAccessedTime=0;s0.launcher=null;s0.monitorMap=s1;s0.status=1;s0.timeElapsed=0;s0.totalCount=0;
dwr.engine._remoteHandleCallback('139','0',[s0]);
11:27:11,187 ERROR [JobRunShell] Job IAM.job1 threw an unhandled Exception:
java.lang.AssertionError: Failed to generate class for com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:790)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:779)
     at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:74)
     at weblogic.rmi.internal.StubInfo.resolveObject(StubInfo.java:226)
     at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:207)
     at sun.reflect.GeneratedMethodAccessor81.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at java.io.ObjectStreamClass.invokeReadResolve(ObjectStreamClass.java:1061)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1762)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     at weblogic.rmi.extensions.server.CBVInputStream.readObject(CBVInputStream.java:64)
     at weblogic.rmi.internal.ServerRequest.unmarshalReturn(ServerRequest.java:100)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_HomeImpl_1032_WLStub.create(Unknown Source)
     at Thor.API.tcUtilityFactory.getUnauthenticatedOperations(Unknown Source)
     at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
     at Thor.API.tcUtilityFactory.<init>(Unknown Source)
     at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
     at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
     at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy114.importUsers(Unknown Source)
     at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
     at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:788)
     ... 37 more
Caused by: java.lang.ArrayIndexOutOfBoundsException: 20
     at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.ensureInitialized(Unknown Source)
     at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.<init>(Unknown Source)
     ... 42 more
11:27:11,203 ERROR [ErrorLogger] Job (IAM.job1 threw an exception.
org.quartz.SchedulerException: Job threw an unhandled exception. [See nested exception: java.lang.AssertionError: Failed to generate class for com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub]
     at org.quartz.core.JobRunShell.run(JobRunShell.java:213)
     at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:534)
Caused by: java.lang.AssertionError: Failed to generate class for com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:790)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:779)
     at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:74)
     at weblogic.rmi.internal.StubInfo.resolveObject(StubInfo.java:226)
     at weblogic.rmi.internal.StubInfo.readResolve(StubInfo.java:207)
     at sun.reflect.GeneratedMethodAccessor81.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at java.io.ObjectStreamClass.invokeReadResolve(ObjectStreamClass.java:1061)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1762)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     at weblogic.rmi.extensions.server.CBVInputStream.readObject(CBVInputStream.java:64)
     at weblogic.rmi.internal.ServerRequest.unmarshalReturn(ServerRequest.java:100)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_HomeImpl_1032_WLStub.create(Unknown Source)
     at Thor.API.tcUtilityFactory.getUnauthenticatedOperations(Unknown Source)
     at Thor.API.tcUtilityFactory.getPropertyValue(Unknown Source)
     at Thor.API.tcUtilityFactory.<init>(Unknown Source)
     at com.vaau.rbacx.iam.oracle.OIMIAMSolution.getUtilityFactory(OIMIAMSolution.java:2542)
     at com.vaau.rbacx.iam.oracle.OIMIAMSolution.readUsers(OIMIAMSolution.java:754)
     at com.vaau.rbacx.iam.service.impl.RbacxIAMServiceImpl.importUsers(RbacxIAMServiceImpl.java:119)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy114.importUsers(Unknown Source)
     at com.vaau.rbacx.scheduling.executor.iam.IAMJobExecutor.execute(IAMJobExecutor.java:121)
     at com.vaau.rbacx.scheduling.manager.providers.quartz.jobs.AbstractJob.execute(AbstractJob.java:72)
     at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
     ... 1 more
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
     at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerator.java:788)
     ... 37 more
Caused by: java.lang.ArrayIndexOutOfBoundsException: 20
     at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.ensureInitialized(Unknown Source)
     at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_1032_WLStub.<init>(Unknown Source)
     ... 42 more
11:27:11,203 DEBUG [QuartzJobListener] job1: job was executed
11:27:11,203 DEBUG [VaauSchedulerEventListenerImpl] Processing VaauSchedulerEvent
11:27:11,203 INFO [VaauSchedulerEventListenerImpl] Job executed: job1, IAM
11:27:11,203 INFO [VaauSchedulerEventListenerImpl] Job run time: 3s
11:27:11,203 INFO [VaauSchedulerEventListenerImpl] Next Run: null

Problems importing connections from a SAN directory

Is anybody having a problem importing connections from a directory that's on a SAN?
My network is setup so that the Application Data directory is out on a SAN and when SQL Developer opens up the file dialog, current directory is listed as C:\ and entry in the file name field is file://<server>/<path to my stuff>/Application Data/SQL Developer/. This looks fine but when I click on the "Open" button to get the directory listing, an error dialog pops up with the following message:
The directory C:\file:\<server>\<path to my stuff>\Application Data\SQL Developer is not accessible. Please select a different directory.
When I change the current directory to the drive that maps the SAN location, I get the same message only with C: replaced with another drive letter.
If I had to guess, the dialog is not processing the file:// protocol indicator properly before it attempts to get the directory listing. Does anyone have a work around?

Other users also had problems with network shares, so you're right that might very well be the cause of your problems.
As workaround, try mapping the settings folder to a local drive. Add this to \sqldeveloper\bin\sqldeveloper.conf:
AddVMOption -Dide.user.dir=C:\sqldeveloperHope that helps,
K.

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

What's wrong? Verify and compare Cisco 2901 config after loading old config from Cisco 2801

Hi Cisco Community / Friends,
I am new to this site though I have cisco account for many years. I am a CCNA ,I passed my certification on January 2013 I seldom use and utilized my skills on networking becuase of my type of work. I am Project Eng'r working in a System integrator company . Anyway, I would like to ask assistance on the configurations of my Cisco router for this gov't projects.. Here's the situation.
We have a new project for the VSAT Comm'n of Coast Watch Station , The VSAT was installed 7 years ago. The VSAT was only used for a year by this Gov't agency because of subscription issue. Now, they wants to revive and use their VSAT facilities for the Coast watch monitoring. Now, some of this routers are working up to now and for some site are already defective so I need to replace the old 2801 router with a new equivalent model which is Cisco 2901. My plan was just to load the old config into the new Cisco 2901 router. However, after loading it to the new router, I am a little worried because I've got some errors received. I load the old config by copying the old files, edit it in notepad, and load the config using Secure CRT (terminal emulator). When I copy the old config of cisco 2801 to new router cisco 2901 , below are the command not recognized on Cisco 2901. What's wrong ? What are these commands for?
Appreciate your comments and help on this matter.. Thank You very much
Note: I Attached the original config from Cisco 2801 and the other file is the config after I load the config file to Cisco 2901.
(Errors see below)
CWS_4_Pandami(config-erm)#mmi polling-interval 60
                         ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi auto-configure
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#no mmi pvc
                               ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-erm)#mmi snmp-timeout 180
                                                        ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config-if)#interface GigabitEthernet0/1
CWS_4_Pandami(config-if)# description ===CWS4 SAT Modem===
CWS_4_Pandami(config-if)# bandwidth 256
CWS_4_Pandami(config-if)# ip address 192.168.42.1 255.255.255.0
CWS_4_Pandami(config-if)# duplex auto
CWS_4_Pandami(config-if)# speed auto
CWS_4_Pandami(config-if)# priority-group 1
                                                    ^
% Invalid input detected at '^' marker.
CWS_4_Pandami(config)#access-list 100 permit ip any any dscp cs5
CWS_4_Pandami(config)#priority-list 1 protocol ip high list 100
                          ^
% Invalid input detected at '^' marker.

Hi
From Cisco's website:
The Modem Management Interface (MMI) is software that enables auto-provisioning for the Cisco 827 routers. The MMI uses a fixed PVC to communicate with the Proxy Element (PE) residing on the digital subscriber line access multiplexer (DSLAM). Using MMI, the Cisco 827 router updates the running image and downloads the prescribed configuration using a configuration file or configuration values in a provisioning information database.
The customer premise equipment (CPE) can be automatically configured using the Cisco DSL CPE download, but it can be configured only with the image provisioning feature.
So because this is your device, you don't want to use MMI anyways.
And "priority-list" is QoS. Probably that QoS-command is old and removed, because now QoS is configured using class-maps and policy-maps.

What is the best way to import contacts from a spreadsheet to my iphone 4S

Hi,
I have around 20,000 contacts that I wish to import onto my iphone 4S.
I am currently compiling a spreadsheet from all different sources. I am based in the UK.
Would there be any format that I need to used?
Is there some sort of application that can be usedto import contacts from different sources?
Thanks guys!

The only way you're gonna get your contacts into the iPhone contacts app is by syncing them through iTunes, from a supported contact application on your computer, or through an Exchange setup like Gmail. So, you will have to get these contacts into Oulook, Windows Address Book, OS X Address Book or in the "cloud".

Failure importing video from the Desktop in iMovie 2009?

When I attempt to import a folder of .MOV videos from the desktop into an existing project in iMovie 2009, it appears to go through the loading and importing steps, but the entire process and loading bar only occur for a matter of seconds, and no video appears to be imported.
I have tried importing the video as a new event, and the process happens the same way, this time creating a new event folder in the Event Library, but with nothing in it.
I have tried selecting only one video, also to no avail.
I have also tried to import videos formatted in .AVI, this failed.
Anyone had this issue, or know a fix/workaround? At this point I don't know how to import video from the hard drive into a new project at all. Dragging the files from desktop to event frame within iMovie does not work either.

Well, I think the 9-pin to 4-pin cable is the best way to go. Get your camera's power adapter out and plug the camera into the wall first. Once the camera's got power, put it into VCR/playback mode. Then also go into the Menus on the camera and also check your manual to make sure you are sending the video signal out through the firewire and not just through the RCA video jacks. I don't know if the GL2 has a control for the Firewire jack, but just double-check that to make sure it's turned on.
Now setup the Mac to recognize the camera. Shut it down completely and plug the firewire cable into the Mac. Make sure your camera hasn't gone to low power/sleep mode. Startup the Macintosh, when you see the desktop appear launch iMovie. Then go to File Menu > Import from Camera. And in that window that pops up it should list your GL2 in addition to the iSight webcam.

Can't import config to anything beyond 6.01 - say it isn't so

Hi all
Just downloaded, burned, and delivered MARS 6 image to one of our sites last week. Target box reimaged from 4.3.6. Exported config from 4.3.6, etc. according to the Cisco documents.
After the re-image, on the config import, i hit this error
File from_04_3_60_to_06_0_60.sql missing from schema.
Configuration import failed with error code: 1
Configrestore failed!
Error: failed to import config data.
A bit of digging - turns out apparently I have to reimage specifically to v 6.01, import the original config to that version, then update the 6.01 image with each sequential 6.x point release individually.
Is this correct?
OK - you got me on a technicality - the upgrade docs do refer to 6.01, but silly me, I just assumed that subsequent point releases of MARS would maintain / preserve the same functionality so I used the latest available 6.06 image.
Is there a quick fix? otherwise this looks like a do-over -and if that works, then a lot of incremental updates.
<sigh>....

Yes, unfortunately migration from version 4.3.6 only works to version 6.0.1, and you would need to perform incremental upgrade from version 6.0.1 onwards. Sorry, no easy and quick way unfortunately.

Importing Markers from Pr / Sb / Ae CS3

I saw that 'Dools' said they figured out how to import
markers from Premiere CS3 into Flash CS3 but I still am unable to
see these markers transfer. I have tried exporting an FLV file from
Premiere with info in the Chapter field. But I don't see any cue
points in the file when I bring it into Flash. I have also tried
Soundbooth. Soundbooth does created an actual xml file but still I
don't see the corresponding cue points in Flash and would really
appreciate any tips from those that have made it work. All of the
manuals mention the capability but don't go much further.
I'm using Premium Production CS3 on Windows.
Thanks a lot,
-Scott

Here's some sample Actionscript 2.0 code (Sorry, haven't
updated it for AS3 yet) that will let you verify external XML cue
points in your Soundbooth or Premiere exported video:
Actionscript 2.0 based Flash Cue Point Data Exchange
Demonstration
Requires:
- FLVPlayback component on the Stage with an instance name of
my_FLVPlybk
- Dynamic Text Field on the Stage with an instance name of
currentCuePoint
- Cue Point XML file
var myCues:XML = new XML(); //Create XML Object
var curCueTime:Number = 0; //Set current cue point to 0
var curCueName:String = ""; //Set current cue point name to
myCues.ignoreWhite = true; //Ignore Whitespace in XML file
First, setup the onLoad routine to parse the cue file.
The file being loaded is a cue points XML file exported from
Adobe Soundbooth.
The example assumes it's relative to the swf but could also
be loaded using
http:// or file:// */
myCues.onLoad = function(success) {
if (success) {
convertCues(myCues); // Function located at end of script
myCues.load("darjeeling_external.flv_markers.xml"); //change
these filenames
my_FLVPlybk.contentPath = "darjeeling_external.flv"; // to
match your own
var listenerObject:Object = new Object();
listenerObject.cuePoint = function(eventObject:Object):Void {
trace("Cue Point \"" + eventObject.info.name + "\" fired at:
" + eventObject.info.time+ " (type: " + eventObject.info.type+")");
currentCuePoint.text = (eventObject.info.time + " seconds:
Cue Point \"" + eventObject.info.name + "\" (type: " +
eventObject.info.type+")");
my_FLVPlybk.addEventListener("cuePoint", listenerObject);
function convertCues(cueFile) {
for (i=0; i < cueFile.firstChild.childNodes.length; i++) {
curCueTime = (Number(cueFile.firstChild.childNodes
.firstChild.firstChild.nodeValue)/1000);
curCueName =
cueFile.firstChild.childNodes.firstChild.nextSibling.nextSibling.firstChild.nodeValue;
trace("Adding Cue " + i + " at time: " + curCueTime + "
named: \"" + curCueName + "\"");
my_FLVPlybk.addASCuePoint(curCueTime, curCueName);
Here's a similar block of code, but to display embedded cue
points in your FLV files:
Actionscript 2.0 based Flash Cue Point Data Exchange
Demonstration
Requires:
- FLVPlayback component on the Stage with an instance name of
my_FLVPlybk
- Dynamic Text Field on the Stage with an instance name of
currentCuePoint
var myCues:XML = new XML(); //Create XML Object
var curCueTime:Number = 0; //Set current cue point to 0
var curCueName:String = ""; //Set current cue point name to
my_FLVPlybk.contentPath = "darjeeling_embedded.flv";
var listenerObject:Object = new Object();
listenerObject.cuePoint = function(eventObject:Object):Void {
trace("Cue Point \"" + eventObject.info.name + "\" fired at:
" + eventObject.info.time+ " (type: " + eventObject.info.type+")");
currentCuePoint.text = (eventObject.info.time + " seconds:
Cue Point \"" + eventObject.info.name + "\" (type: " +
eventObject.info.type+")");
my_FLVPlybk.addEventListener("cuePoint", listenerObject);
There is a known bug in Adobe Media Encoder that prevents cue
points from being embedded in an audio-only FLV. It isn't clear
that's the case you're seeing, but if you disabled video export
when you created the FLV, that may explain the problem you're
seeing.
Durin

How to use imported paths from Photoshop/Illustrator as motion guides

Hi folks,
I've been raking the internet with no success for an answer to my question, but I've had no luck so far.
What I'm hoping to achieve animation wise is to have a shape move around a set path that was created in Photoshop. The reason being, it's a very specific shape (near enough a square but with curved corners and a chunk missing out of one of the sides), and I used the paths feature in Photoshop to create it and stroke the path for the smoothest possible effect. What I'd ideally like to do is import the same path I used to create the shape into Flash Professional CS6 and then use that same path to guide a small symbol around the edge of the square.
So far, I've worked out how to apply motion to a symbol through basic tweens, and then I can draw out a line using the pencil tool and apply that to the tween so it follows the pencil line instead of just going from point A to point B. The problem is, this looks awful...I'm not good enough with a mouse to create absolutely perfect shapes freehand, so I just want to be able to use the Photoshop path as my motion guide instead of having to make another one from scratch.
I've looked around for various importing methods, the most success I've had is exporting the paths to an Illustrator file, and then importing the Illustrator file into Flash directly. However, I have NO idea where these paths go when they're imported, or how to access them. If I import them to the stage, they seemingly disappear before I've even seen them, and if I import them to the library they just aren't there.
I could also do with a brief description of how paths work in Flash - I'm familiar with the Photoshop layout, what with the paths appearing in a panel next to the layers one (makes perfect sense to me, as you can just switch between the two panels to view whatever you want). I just don't understand how they work in Flash and what I should be looking for....
Many thanks in advance for any help!
Todd

I had a play around with some variations of this. What I can't grasp is why Flash won't recognise my shape layer as a motion path. I've tried breaking it down, that doesn't work... I traced it narrowly in Photoshop and imported it as a thin line with a gap (so essentially a line with two ends), and it comes into Flash as a bitmap or something of that sort. I found an option that traces the bitmap, and appears to convert it into a shape layer...I've managed to find the optimal settings so the line is joined all the way through apart from the start and end points. The only thing is, Flash seems to not even notice this as a guide layer when I apply it to the symbol I'm trying to animate. It just doesn't even notice it's there. The object moves straight from point A to point B in a straight line, the guide layer does nothing to adjust the motion... Is it not possible for the traced line to act as a motion guide? It's a shape, it is a single line with a start point and an end point, and there are no other instances of anything else in the layer - just the line and nothing else.
This seems way more difficult than it should be...I'm sure Adobe could have integrated a MUCH easier system for importing paths from Photoshop that actually exist in Flash rather than disappearing into some abyss instead!
Here is a screenshot of what I'm working with: http://gyazo.com/4c1046767e1ee8bf99f65751b9ba81b8
The long black oval is the shape I'm trying to animate. I've tried applying tweens to it while it's in shape form and while it's in every different symbol form, all to no avail.
The black line is what I'm trying to use as the guide. Having looked online, people seem to be able to just use the "paste in place" option and it somehow knows exactly what they mean and animates around the line perfectly. I tried that and it didn't work (no surprise there), and then I tried the motion guide layer setup and it also didn't work. I'm not sure if tracing a bitmap into a shape layer somehow removes any possibility of the line being recognisable as a line or something...could that be the case?
Is there a simple way to turn a shape layer (in this case the black line) into a motion guide that I'm missing? I thought just turning the layer into a guide layer would do the trick, but obviously not :/

VMS 2.2 import configs from routers setup by CSPM 3.0

Similar Messages

Maybe you are looking for