VMS 2.3 on 2003 server?

Folks,
Does anyone know if VMS 2.3 can be installed on 2003.
Thanks

VMS 2.3 can only be installed on Windows 2000 sp4. The replacement product for VMS called Cisco Security Mgr (CSM) will be supported on Server 2003. CSM will be available tentatively around early 2006.

Similar Messages

VMS 2.2 On win2003 server

Can VMS 2.2 or 2.3 be installed on windows 2003 server.
if they can be then how

VMS 2.3 can only be installed on Windows 2000 sp4. The replacement product for VMS called Cisco Security Mgr (CSM) will be supported on Server 2003. CSM will be available tentatively around early 2006.

2003 Server in Hyper V

Good Morning,
I have a 2008 server and I am running HYPER V with a virtualized 2008 server and I am also trying to virtualize a 2003 server. I have installed the 2003 server but I cant get the mouse to work. Hyper v is telling me to install the integration services which I try and do and then I get an error saying that "an error has occured the specified program requires a newer version of windows."
Am i able to install a 2003 virtualized server on a 2008 server running hyper V?

Yep, Brian's on point with this one
You'll need to make sure you're running the Release version of Hyper-V by downloading the RTM Update
950050 Description of the update for the release version of the Hyper-V technology for Windows Server 2008
http://support.microsoft.com/default.aspx?scid=kb;EN-US;950050
The VMs that you have configured now may not work after you update to RTM. If you cannot start them after you update, read this article:
949222 Virtual machines that were created on the beta version of the Hyper-V role do not start after the Hyper-V role is updated to a later version
http://support.microsoft.com/default.aspx?scid=kb;EN-US;949222
Now, in regard to the message you're seeing when you attempt to install the ICs. Windows 2003 requires Service Pack 2 before the Integration Services will install. Download it here http://technet.microsoft.com/en-us/windowsserver/bb229701.aspx and then install it and the ICs will install just fine.
=============================
In regard to the error about the patch not applying to your system, verify wether or not it's already installed.
Go to Programs and Features in the Control Panel, then select 'Show installed Updates' in the upper left hand corner, and look for (KB950050) - it should be toward the bottom if not the actual last update listed.
If you have it there then the message is right - it doesn't apply. Then all you'd need to do is install Sp2 for 2003 and you'll be good to go for installing the Integration Services.
Hope this helps.This posting is provided "AS IS" with no warranties, and confers no rights.

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

Space Problem in G: - after NW2004s SR1 installation on Windows 2003 server

HI Friends,
I have installed NW2004s SR1 on Windows 2003 server with Oracle 10g database successfully. My server has sufficient harddisk space as follows.
C: 9.6GB
G: 24GB
H:64GB & I: 73GB.
RAM is 6GB
While installing NW2004s i have defined a paging size on C: 400MB-1600MB and
i have set the option as System Manageble on other drives G, H& I drives. I did not get any Swap space problem while installing.
During installation I have chosen G: drive to store MirrorlogA, MirrorlogB, Oraarch, OriglogA, OriglogB folders of Oracle for redolog archives,.Total size of all these folders is 17.4 GB
G: drive has one more folder Program files which is of 155KB and no other files exist in it.
But My system says that I am running out of Space on G: drive and free space available now is only 44MB.
My question is where has the rest 5GB of space gone? Is it consumed as a part of Paging file which i have set on this drive as System manageble??
I have set the same option on other drives too i..e H & I. But i am not facing any space issues for these drives.
What could be going wrong?? Please suggest me how to correct this
Thanks
mv_d

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Netweaver 2004S installation on Windows 2003 server : Oracle 10g Problem

Hi Friends,
I am installing the SAP Netweaver 2004s on a server which has Windows 2003 server Operating system on it.
It has got 6GB RAM and has, 5gb of free space in C drive, H: drive has 70 gb and I: drive has 50 GB of free space in it.
I am running Pre_requiste checker tool to check my hardware & software requirements in order to go ahead with installation, as a part of SAPInst.exe execution.
The results of Prerequisite checker tool are satisfied except for one " SWAP SPACE VALUES"
I am getting the message as follows
"The Minimum SWAP SPACE values required is 10994MB and currently you have 5993MB"
How to increase this SWAP space value? Please let me know the procedure.
Currently my server has a paging file details as below : Min size : 2MB & Max size : 9214MB allocated on C: drive. No other drive has paging file allocation.
What effect will I have if i proceed without meeting this requirement??
Suitable answers will be rewarded.
Thanks
Diwakar

OPen windows explorer and right click my computer
Select Properties
Click Advanced Tab
Click Settings (performance)
Select Advanced Tab
In virtual memory - click change.
Increase swap space/page file here.

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Oracle HTTP Server (OHS) Installation Problem on Win 2003 Server SP2

Hi,
I tried to install Oracle HTTP Server (OHS) on my Windows 2003 server SP2, however I couldn't manage to succeed this.
I tried on 3 different win2003 server SP2 machines and couldn't able to install properly.
I easily installed and run this HTTP server on my Windows 7 machine. However on the other partition of my PC
windows server 2003 is installed. It didn't worked on this OS.
Once I was somehow able to install OHS on my 64 bit Windows 2008 Server, but again never:((
I got the following error messages during the install.
waiting for your answers .
ERROR1
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (instance1)
Error
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Unable to validate NonJ2EEManagement Application deployment on admin server.
Step Create and Start AS Instance (instance1) failed
Log
Step Create and Start AS Instance (instance1) started
Deploying NonJ2EEManagement Application...
Step Create and Start AS Instance (instance1) failed
Step Create and Start AS Instance (instance1) failed
Create and Start OHS Component (ohs1)
Log
Create Shortcuts
Log
ERROR2
Web Tier Configuration
Log
Config Action Web Tier Configuration started
Create and Start AS Instance (inst2)
Error
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Unable to start opmn
Step Create and Start AS Instance (inst2) failed
Log
Step Create and Start AS Instance (inst2) started
Creating Oracle Instance directories...
Recording OPMN ports reservations...
Bootstrapping OPMN configuration files...
Instantiating opmnctl for direct usage...
Registering instance
Step Create and Start AS Instance (inst2) failed
Step Create and Start AS Instance (inst2) failed
Create and Start OHS Component (ohs2)
Log
Create Shortcuts
Log

A few guesses what could be wrong.
- Under which user are you installing, does this user have all the rights to create and start stuff.
- Have you first installed a weblogic server (this should be installed) and did associate any components with the weblogic domain?
I usually do not associate anything with my weblogic domain and configure the httpd.conf file for the Apache server by hand instead of using the enterprise manager.
Once the WebLogic server is installed i follow the following steps
Installation WebTier
Run setup.exe
Select Install Software - Do Not Configure.
Click Next.
Prerequisite Checks --> Next.
Accept the default installation directory.
Click Next.
Uncheck i wish to... click Next (in the pop-up Yes)
Click Install.
Click when the installation it finished and click Finish
Configuration WebTier
Run the file <WebTier-Home>/bin/config.bat.
Click Next
Uncheck Associate Selected Components with WebLogic Domain and click Next
Accept the defaults and click Next
Enter the parameters for the WebCache
Web Cache Administrator Password: password
Confirm Password: password
Click Next.
Select Auto Port Configuration and click Next.
Uncheck I wish to... and click Next. (pop-up Yes)
Click Configure
Click Next and Click Finish
When i follow the above steps an instance of the webtier is running.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

Trying to recover a mailbox from an old Exchange 2003 server

I still have a 2003 server in my environment but all functions and mailboxes are on Exchange 2010. The only reason the 2003 server is still around is for the off chance of requiring a restoration which has now come up. I have successfully restored a
mail store to a recovery storage group but I am unable to export mailboxes from it using exmerge.
I get the following error:
[10:16:16] Copying data from mailbox 'Jacques Legare' ('LEGARE') on Server 'MAIL-SERVER' to file 'C:\TEMP\LEGARE.PST'.
[10:16:16] Error opening message store (MSEMS). Verify that the Microsoft Exchange Information Store service is running and that you have the correct permissions to log on. (0x8004011d)
[10:16:16] Errors encountered. Copy process aborted for mailbox 'Jacques Legare' ('LEGARE').
I have read many, many articles regarding the requirement for “send as” permission. I have granted send as permissions to several different domain accounts and local accounts on the Exchange server but I get the same result with all of them.
It looks like the problem may be because the mailbox no longer exists on the Exchange 2003 server.
So what do I have to do to recover this mailbox? Can I create a mailbox for this user on the 2003 server without messing up his the mailbox on the 2010 server? Instead of restoring to the recovery storage group, should I restore and overwrite the original mailbox
store? Again, will that mess up anything with the 2010 server?

0x8004011d is permission related Error.
Refer to the link below and download EXMERGE guide which has complete procedure documented.
https://gallery.technet.microsoft.com/office/Guide-to-Use-Exmerge-to-fd00af49
If the mailbox that need to be restored has to be extracted from RSG is already moved to Exchange 2010 then you will not be able to run exmerge against it.
You might have to update the attribute MsExchOrigMDB on the RSG to point to Exchange 2010 Database where the mailbox is now located.
even this information is enclosed in the EMERGE Guide.
Revert back for any queries/outcome.
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Crystal Ras 9 on Windows 2003 Server, IIS6.0, single threaded?

We have just migrated from Windows 2000 server to Windows 2003 Server over the weekend. We ran into an issue with Crystal Ras 9.0 where the server serving up reports slower that our previous box. We are using IIS 6.0 and .net 2.0 framework with 1.1 installed for backward compat on our some of our old legacy codes. From what our developers can tell, the issue seems to be Crystal Ras queuing up the request and process them one at a time. That didn't happen before the migration. In fact, we also saw it working in our test environment before the migration. Once the pool is filled no further reports are generated which causes all report to stop which also starts to hang our server. They symptoms is worst under heavy user load. We tested with 6 simultaneous users and all 6 are done at the same time no matter the size of the report. Even the one that fail with an error message came up at the exact same time.
Are there anyway we can adjust the IIS pools and or Crystal Ras to support additional threads? We are connecting to Windows 2008 SQL Server EE. Any suggestions and or help is appreciated. I cannot find any references that would help us diagnose this further.
Also, if you can also detail the cost to buying a phone case, that would be helpful as well.
Thanks
-atiwat

Since you are not changing the version of RAS, I am not sure why the queuing would be different on different Operating Systems? You may want to check on how the queuing is setup on the WIN 200 server and duplicate that on the WIN 2003 server. Also, RAS has a limited number of licenses out of the box. Ensure that you are using the same license on both environments.
Re. phone support. You can obtain a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
However, please note that support of version 9 products terminated years ago, so you will not be able to get support for your version. To get phone support, you will have to upgrade to a supported version of RAS (XI r2 at minimum).
Ludek
BTW.; Windows 2008 SQL Server EE came way after RAS / CR 9 and has thus not been tested in this environment...

Crystal report problem on window 2003 server

Hi
We had developed a web based application using .Net 2.0 (C#) , Crystal reports (bundled version within VS2005) on Window XP, SQL Server 2005, we are able to see all the reports on this development enviroment, but when the application is deployed on Windows 2003 server , IIS 6.0 and SQL server 2005 , we are not able to view the reports we are thrown with an error as
Failed to open a rowset. Details: ADO Error Code: 0x Source: Microsoft OLE DB Provider for SQL Server Description: Procedure or Function 'sp_xxxx' expects parameter '@ppppp', which was not supplied. SQL State: 42000 Native Error: Failed to open a rowset. Error in File
Could you please explain what the problem is ? as we are stuck with this problem for the migration of application to the user community.
Regards
varma

We have same problem
does anyone have the answer?

Why can you not introduce a 2003 server into a 2008 domain?

Hello,
So we are going to be upgrading our domain very shortly from 2003 to 2008 R2. I know that we are not able to have a 2003 server in the 2008 forest, but the question is why? I'm trying to find some information on Google but can't actually find the reason.
I have some ideas as to why, but I wanted some solid info, if possible.
Thank you!

In that case it depends on current functional level. If you're at 2008 or greater then you would not be able to bring in a 2003 DC.
http://technet.microsoft.com/en-us/library/cc787385(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Using Time Machine to back up to a Windows 2003 Server

I am trying to set up my Time Machine to back up to a windows 2003 server share. I have found some hacks on how to do so, however i am not successful.
What I have done so far:
TMShowUnsupportedNetworkVolumes 1 in terminal, which got TM to see my shared drives, however, when i try to backup to my specific drive it gives me an error of not being able to write disk image. So i did:
hdiutil create -size 100g -fs HFS+J -volname “TimeMachine Hcomp” Hcomp_000045128a91.sparsebundle
using the appropriate mac address, volume name, and OSX computer name. However, when i run that in terminal, it comes back with a message saying it can only create one volume at a time.
I'm not quite sure where to go from here, I feel so close, but im stuck.
Also, on another side note, If I get this working, I would like to find a way where when TM is backing up data, it does not pop up the work bar window, I would prefer if it just worked in the background, and show it's status in the menu. I dont know if this is possible, But any suggestions would be of help
Thanks in advance!

AFreeman wrote:
Thanks for the response,
I understand the requirements for TM to work, and In the steps i've been trying, you'll see that the command 'hdiutil create -size 100g -fs HFS+J -volname “TimeMachine Hcomp” Hcomp_000045128a91.sparsebundle ' creates and HFS drive partition on my server share.
I guess i'm not looking for an answer as to why when i enter this command, I get a response of only one volume can be created at a time. Am I missing something in this command?
Thanks!
Since you are using a hack, and therefore in an unsupported area, I suppose anything possible.
You might browse around the TimeCapsule forum which more closely represents what you are doing than this forum
The TC forum is here:
http://discussions.apple.com/forum.jspa?forumID=1253
It's possible that it may be a limitation of the system, hack or no hack.

VMS 2.3 on 2003 server?

Similar Messages

Maybe you are looking for