VMS/Autoupdate HTTP Post fail

I am trying to use the Auto Update Server to update my firewalls, but it is not working.
When my pix 501 tries to get its updates I get the following error in the 501's log: Error 612003 Auto Update failed to contact: https://10.10.5.6/autoupdate/AutoUpdateServlet, reason: HTTP POST failed. Also, the reporting section of the auto update server doesn't show the Pix as trying to get the update.
Anybody know why it is failing?
Thanks.

Hello Jared-
I saw your posting on the VMS Auto Update server failing. I am having the exact same issue. The OS and PDM updates work fine, but the config update is giving me the HTTP POST error.
Have you come up with anything?
Any help would be appreciated.
Thanks Paul
[email protected]

Similar Messages

"HTTP Post Failed" when trying to unlock 6212 Clas...

Hi,
Here is my problem:
When I run the UnlockMidlet applet on 3 different 6212 Classic phones, it fails with the error message: "HTTP Post Failed".
I have successfully unlocked 16 of these phones in the past 10 months following the exact same procedure.
The provider is T-Mobile.
When I launch the applet, it says, "Connecting to server", then "Connected to server" and then displays the error message mentionned above.
Could somebody help me figure out if:
1. The Nokia server is down,
2. T-Mobile is somehow blocking the connection to the unlocking server?
The T-mobile access point name is epc.tmobile.com if it makes any difference.
Any help would be greatly appreciated. I really don't know why it stopped working.
Thanks.

It's working today! All 3 phones unlocked without problems.
I am guessing the Nokia service was down for the last couple of days. I wish I knew where to look to find out if it's up or not.

Http post issue in soa suite 11g with 10g wsdl

I have 10g process that has http post wsdl as below. When I'm trying to create a project in 11g 11.1.1.4 with same wsdl, getting the following error at building the project. "Error(12,61): Parse of component type files failed, check the adf-config.xml file : "Error at line 34 char 64: Malformed WS Binding port. Missing # between namespace URI and service/port names."
I'm sure that http post mechanism is changed in 11g, but can you please help what exactly is wrong ?
<?xml version="1.0"?>
<definitions name="HTTPPostService"
targetNamespace="http://services.otn.com"
xmlns:tns="http://services.otn.com"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
          xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
          xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
>

<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://services.otn.com"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="Postreq">
<complexType>
<sequence>
<element name="Order_Update_Request">
<complexType>
<sequence>
<element name="ORD_ID" type="string"/>
<element name="E_MAIL" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
<element name="Postresp">
<complexType>
<sequence>
<element name="Order_Update_Response">
<complexType>
<sequence>
<element name="RETURN_STATUS" type="string"/>
<element name="MESSAGE_TEXT" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</schema>
</types>

<message name="HTTPPostServiceRequestMessage">
<part name="payload" element="tns:Postreq"/>
</message>
<message name="HTTPPostServiceResponseMessage">
<part name="payload" element="tns:Postresp"/>
</message>


<portType name="HTTPPostService">
<operation name="IScript_Update_Order">
<input message="tns:HTTPPostServiceRequestMessage" />
<output message="tns:HTTPPostServiceResponseMessage"/>
</operation>
</portType>
<binding name="HTTPPost" type="tns:HTTPPostService">
<http:binding verb="POST"/>
<operation name="IScript_Update_Order">
<http:operation location="/PSIG/HttpConnector?From=PSFT_XINBOUND&MessageName=ABC_ORD_UPDORDER&MessageType=sync&MessageVersion=v1"/>
<input>
<mime:mimeXml part="payload"/>
<mime:content type="text/xml"/>
</input>
<output>
<mime:mimeXml part="payload"/>
          <mime:content type="text/xml"/>
</output>
</operation>
</binding>
<service name="HTTPPostService">
<port name="HTTPPost" binding="tns:HTTPPost">
<http:address location="http://myserver.mycompany.com"/>
</port>
</service>

<plnk:partnerLinkType name="HTTPPostService">
<plnk:role name="HTTPPostServiceProvider">
<plnk:portType name="tns:HTTPPostService"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>

Can you make sure your helloworld is using adf bindings as mentioned in thread Re: Urgent :: 11g Invoking Composite from Java/From Webservice Proxy

Specify file name of the document returned on the HTTP post

Hello,
we are submitting a PDF form by calling submitForm function:
doc.submitForm
        cURL: "http://localhost/script",
        cSubmitAs: "XML"
The server returnes data of type "Content-type: application/pdf" and as a result this aplication/pdf data is displayed in a new window in Acrobat Reader.
The document in new window has name e.g. A9R3347.tmp, is it possible to force some concrete name ?
We tried to send from server the http header:
Content-Disposition: attachment; filename=\"custom_name.pdf\"
or
Content-Type: application/pdf;         filename=custom_name.pdf
but non of this works.
1/ is it possible to set some custom name of the document, which is returned from a server in response of HTTP Post submit ?
2/ is it possible to return other kind of data then application/pdf ? ( my tests with AR 9.3 with other formats failed).
Thanks for any advice.

See Oracle Metalink,
..Oracle Portal Technical Forum,
....Subject: PORTAL - uploading files (file attachments) with file names.
This message thread outlines javascript code that automatically captures the filename during an upload.

HTTP POST binding not available in 11g???

Hi,
I am trying to call a HTTP service using HTTP POST, passing HTTP params to it. I created a small bpel process in 10.1.3.4, and used the HTTP POST samples, which worked out really well.
However target platform is 11g. So I just tried to migrate the project and got the following warnings.
WARNUNG: UPGBPEL-02043: The WSDL used for "HTTPPostParam" has HTTP based binding definition for the porttype specified. SOA Suite 11g does not support this and hence upgrade will not carry this over to the generated composite. Compilation will fail if the composite reference is not setup with binding. After upgrade, setup the reference by specifying a WSDL with SOAP binding. Check SOA Upgrade guide for more information.
WARNUNG: UPGBPEL-02009: No Binding setup for : "HTTPPostParam". This will cause compilation of the upgraded project to fail. Check SOA Upgrade documentation on manual steps necessary to bind this composite reference. If necessary, upgrade and deploy any dependencies. If planning to retain 1013x nodes in this projects dependency tree, check earlier part of this log for 1013x WSDL URLs that can be used.
Does this really tell me that HTTP post or get is not available anymore? Or do I miss anything? Or is there a workaround?
Thanks and regards,
Thomas
PS: This is my POSTParam WSDL, which is not yet complete, but working on 10.1.3.4
<?xml version="1.0" encoding="utf-8"?>
<definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:tns="http://http.oracle.com/postParam"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
targetNamespace="http://http.oracle.com/postParam"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:get="http://xmlns.oracle.com/HttpClientBPELProcess">
<types>
<xsd:schema xmlns="http://www.w3.org/2001/XMLSchema">
<xsd:import schemaLocation="HttpClientBPELProcess.xsd"
namespace="http://xmlns.oracle.com/HttpClientBPELProcess"/>
</xsd:schema>

</types>
<message name="HttpPostParamIn">
<part name="HighwayEndpointId" type="xsd:string"/>
<part name="HighwayMessageId" type="xsd:string"/>
<part name="HighwayMessage" type="xsd:string"/>
<part name="Synchronous" type="xsd:string"/>
<part name="DISABLE_MESSAGEINPUT_ECHO" type="xsd:string"/>
</message>
<message name="HttpPostParamOut">
<part name="Body" element="get:Request"/>
</message>
<portType name="HttpPostParamPortType">
<operation name="PostData">
<input message="tns:HttpPostParamIn"/>
<output message="tns:HttpPostParamOut"/>
</operation>
</portType>
<binding name="HttpPostParamBinding" type="tns:HttpPostParamPortType">
<http:binding verb="POST"/>
<operation name="PostData">
<http:operation location="/highway/http/SubmitMessage"/>
<input>
<mime:content type="application/x-www-form-urlencoded"/>

</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<service name="PostParamService">
<port name="HttpPostParamPort" binding="tns:HttpPostParamBinding">
<http:address location="http://itrax03.wlgore.com:8080"/>
</port>
</service>
<plnk:partnerLinkType name="PostParamService">
<plnk:role name="PostParamServiceProvider">
<plnk:portType name="tns:HttpPostParamPortType"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>

The sample that heidi posted above is basically the codebase to the http binding we are planning to ship with Patchset 2. It's based on Jax-WS' http binding.
Let me know if you run into any issues (the source is included - so you can play around :) - no license )

HTTP post data from the Oracle database to another web server

Hi ,
I have searched the forum and the net on this. And yes I have followed the links
http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
http://manib.wordpress.com/2007/12/03/utl_http/
and Eddie Awad's Blog on the same topic. I was successful in calling the servlet but I keep getting errors.
I am using Oracle 10 g and My servlet is part of a ADF BC JSF application.
My requirement is that I have blob table in another DB and our Oracle Forms application based on another DB has to view the documents . Viewing blobs over dblinks is not possible. So Option 1 is to call a procedure passing the doc_blob_id parameter and call the web server passing the parameters.
The errors I am getting is:
First the parameters passed returned null. and
2. Since my servlet directly downloads the document on the response outputStream, gives this error.
'com.evermind.server.http.HttpIOException: An established connection was aborted by the software in your host machine'
Any help please. I am running out of time.
Thanks

user10264958 wrote:
My requirement is that I have blob table in another DB and our Oracle Forms application based on another DB has to view the documents . Viewing blobs over dblinks is not possible. Incorrect. You can use remote LOBs via a database link. However, you cannot use a local LOB variable (called a LOB <i>locator</i>) to reference a remote LOB. A LOB variable/locator is a pointer - that pointer cannot reference a LOB that resides on a remote server. So simply do not use a LOB variable locally as it cannot reference a remote LOB.
Instead provide a remote interface that can deal with that LOB remotely, dereference that pointer on the remote system, and pass the actual contents being pointed at, to the local database.
The following demonstrates the basic approach. How one designs and implements the actual remote interface, need to be decided taking existing requirements into consideration. I simply used a very basic wrapper function.
SQL> --// we create a database link to our own database as it is easier for demonstration purposes
SQL> create database link remote_db connect to scott identified by tiger using
2 '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SID=dev)(SERVER=dedicated)))';
Database link created.
SQL> --// we create a table with a CLOB that we will access via this db link
SQL> create table xml_files( file_id number, xml_file clob );
Table created.
SQL> insert into xml_files values( 1, '<root><text>What do you want, universe?</text></root>' );
1 row created.
SQL> commit;
Commit complete.
SQL> --// a local select against the table works fine
SQL> select x.*, length(xml_file) as "SIZE" from xml_files x;
   FILE_ID XML_FILE                                                                                SIZE
         1 <root><text>What do you want, universe?</text></root>                                    53
SQL> --// a remote select against the table fails as we cannot use remote pointers/locators
SQL> select * from xml_files@remote_db x;
ERROR:
ORA-22992: cannot use LOB locators selected from remote tables
no rows selected
SQL> //-- we create an interface on the remote db to deal with the pointer for us
SQL> create or replace function ReturnXMLFile( fileID number, offset integer, amount integer ) return varchar2 is
2          buffer varchar2(32767);
3 begin
4          select
5                  DBMS_LOB.SubStr( x.xml_file, amount, offset )
6                          into
7                  buffer
8          from    xml_files x
9          where   x.file_id = fileID;
10
11          return( buffer );
12 end;
13 /
Function created.
SQL> --// we now can access the contents of the remote LOB (only in 4000 char chunks using this example)
SQL> select
2          file_id,
3          ReturnXMLFile@remote_db( x.file_id, 1, 4000 ) as "Chunk_1"
4 from       xml_files@remote_db x;
   FILE_ID Chunk_1
         1 <root><text>What do you want, universe?</text></root>
SQL> --// we can also copy the entire remote LOB across into a local LOB and use the local one
SQL> declare
2          c               clob;
3          pos             integer;
4          iterations      integer;
5          buf             varchar2(20);   --// small buffer for demonstration purposes only
6 begin
7          DBMS_LOB.CreateTemporary( c, true );
8
9          pos := 1;
10          iterations := 1;
11          loop
12                  buf := ReturnXMLFile@remote_db( 1, pos, 20 );
13                  exit when buf is null;
14                  pos := pos + length(buf);
15                  iterations := iterations + 1;
16                  DBMS_LOB.WriteAppend( c, length(buf), buf );
17          end loop;
18
19          DBMS_OUTPUT.put_line( 'Copied '||length(c)||' byte(s) from remote LOB' );
20          DBMS_OUTPUT.put_line( 'Read Iterations: '||iterations );
21          DBMS_OUTPUT.put_line( 'LOB contents (1-4000):'|| DBMS_LOB.SubStr(c,4000,1) );
22
23          DBMS_LOB.FreeTemporary( c );
24 end;
25 /
Copied 53 byte(s) from remote LOB
Read Iterations: 4
LOB contents (1-4000):<root><text>What do you want, universe?</text></root>
PL/SQL procedure successfully completed.
SQL> The concern is the size of the LOB. It does not always make sense to access the entire LOB in the database. What if that LOB is a 100GB in size? Irrespective of how you do it, selecting that LOB column from that table will require a 100GB of data to be transferred from the database to your client.
So you need to decide WHY you want the LOB on the client (which will be the local PL/SQL code in case of dealing with a LOB on a remote database)? Do you need the entire LOB? Do you need a specific piece from it? Do you need the database to first parse that LOB into a more structured data struct and then pass specific information from that struct to you? Etc.
The bottom line however is that you can use remote LOBs. Simply that you cannot use a local pointer variable to point and dereference a remote LOB.

HTTP Post Outbound scenario - Error 110 - Timeouts in SMICM Tracefile

HI There
We have a scenario where we do a HTTP post using the HTTP Plain Adapter to a SMS service provider from a message received from a BW system via RFC, It works perfectly in our development system but we cannot get it working in our production system
In SXI_MONITOR the message fails with the error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Running a trace in SMICM shows the following in the tracelog
[Thr 4632] IcmConnRollInWP: no need to roll in WP status: ROLLED IN
[Thr 4632] IcmReadFromConn(id=9/140033): request new MPI (0/0)
[Thr 4632] MPI<3018f>19#4 GetOutbuf -1 cb2250 65536 (0) -> 0DE122B0 0
[Thr 4632] NiIRead: hdl 43 recv would block (errno=EAGAIN)
[Thr 4632] NiIPeek: peek for hdl 43 timed out (r; 500ms)
[Thr 4632] NiIRead: raw read for hdl 43 timed out (500ms)
[Thr 4632] IcmReadFromConn: read failed with timeout: 500 -> roll out
[Thr 4632] MPI<3018f>19#5 WriteOOB 00000000 02000000 09000000 01
[Thr 4632] MPI<30190>15#11 ReadOOB 01000000 01000000 2D000000 00 -> 0
[Thr 4632] IcmHandleOOBData: Received data on 1st MPI (seqno: 1, type=1, reason=1): 45/14512/0
[Thr 4632] MPI<3018f>19#10 ReadOOB 01000000 01000000 2D000000 00 -> 0
[Thr 4632] IcmHandleOOBData: Received data on 2nd MPI (seqno: 1, type=1, reason=1): 45/14512/0
[Thr 4632] IcmHandleOOBData: Received context key (type=1, reason=1): 45/14512/0
[Thr 4632] NiWakeupExec: send wakeup signal to 64997 (sock 16992)
[Thr 4632] IcmConnRollOut: connection (id=9/140033) rolled out:
[Thr 4632] CONNECTION (id=9/140033):
    used: 1, type: 1, role: 2, stateful: 0
    NI_HDL: 43, protocol: HTTP(1)
    local host: 200.1.1.100:3405 ()
    remote host: 196.30.220.242:80 ()
    status: READ_RESPONSE
    connect time: 23.07.2008 07:13:10
    WP-status: ROLLED OUT (Context: 9, Role: 2)
              tid: 45, mode: 0, uid: 14512, roll-reason: ICM_ROLL_NETTIMEOUT
With the following 2 lines ir differs from our development system - this is the point where it goes wrong
[Thr 4632] NiIRead: raw read for hdl 43 timed out (500ms)
[Thr 4632] IcmReadFromConn: read failed with timeout: 500 -> roll out
We have already checked the following between the 2 systems
1. Configuration in Netweaver Administrator is Consistent
2. Communication channel and Mapping is consistent
3. Profile parameters for ICM are consistent
Any ideas as to what this problem could be
Many Thanks

Hi
after you download the html client.
go to view -> source
and enter the present xiusername & pwd which you using and save.
Enter the below details in http client.
Servername : XIServername
Port : 80<instancenumber>
Client : XI server client number
Server : Sender service (business service or busienss system or integration process...when it comes to the HTTP adapter you need to create the business service that business service name you need to enter )
Interface name : outbound interface name
namespace : name for interface.
If you doing Party scenario enter the Party, Agency and Schema details also else optional.
Enter the Input xml data while enter the input data remove the first xml version line and paste the other data.
click on send message.
check the exchange profile set the httpport or not
check these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/http%2bto%2brfc%2bsynchronous%2bscenario%2b-%2bfaqs
HTTP to RFC - A Starter Kit
/people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
Regards,
Suryanarayana

HTTP Post Error

          I am using WebLogic Server 7.0 SP1 with the iPlanet 4.1 WebLogic Plugin. When
          I do a HTTP Post from my java applet using URLConnection, I am getting the following
          error from the plugin:
          [20/May/2003:11:19:13] failure ( 860): for host 199.228.131.177 trying to POST
          /WebLogicServer/DSSServer/DSSServlet, wl-proxy reports: IO error reading client
          POST data at line
          [20/May/2003:11:19:13] failure ( 860): for host 199.228.131.177 trying to POST
          /WebLogicServer/DSSServer/DSSServlet, wl-proxy reports: exception occurred: 'READ_ERROR
          [os error=0, line 534 of proxy.cpp]: reading client POST data failed'
          The applet code is as follows:
          URLConnection con = toFetch.openConnection();
          con.setDoInput(true);
          con.setDoOutput(true);
          con.setDefaultUseCaches(false);
          con.setUseCaches(false);
          con.setRequestProperty("Accept","text/html");
          con.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
          prout = new DataOutputStream (con.getOutputStream ());
          prout.writeBytes(postdata);
          prout.flush();
          prout.close();
          The iPlanet access log shows a POST request was received but when the request
          is proxied to the WebLogic plugin, the error occurs. I can't tell if this is
          a HTTP header problem or a data problem.
          Any help would be greatly appreciated.
          Thanks,
          Ken


I have exactly the same problem when using a URLConnection to post
          data. Here's the error I get.
          wl-proxy reports: exception occurred: 'READ_ERROR [os error=11, line
          534 of proxy.cpp]: reading client POST data failed'
          Any advices would be appreciated.
          Thanks
          CS
          "Ken Sands" <[email protected]> wrote in message news:<[email protected]>...
          > I am using WebLogic Server 7.0 SP1 with the iPlanet 4.1 WebLogic Plugin. When
          > I do a HTTP Post from my java applet using URLConnection, I am getting the following
          > error from the plugin:
          >
          > [20/May/2003:11:19:13] failure ( 860): for host 199.228.131.177 trying to POST
          > /WebLogicServer/DSSServer/DSSServlet, wl-proxy reports: IO error reading client
          > POST data at line
          > [20/May/2003:11:19:13] failure ( 860): for host 199.228.131.177 trying to POST
          > /WebLogicServer/DSSServer/DSSServlet, wl-proxy reports: exception occurred: 'READ_ERROR
          > [os error=0, line 534 of proxy.cpp]: reading client POST data failed'
          >
          > The applet code is as follows:
          >
          > URLConnection con = toFetch.openConnection();
          > con.setDoInput(true);
          > con.setDoOutput(true);
          > con.setDefaultUseCaches(false);
          > con.setUseCaches(false);
          > con.setRequestProperty("Accept","text/html");
          > con.setRequestProperty("Content-Type","application/x-www-form-urlencoded");
          > prout = new DataOutputStream (con.getOutputStream ());
          > prout.writeBytes(postdata);
          > prout.flush();
          > prout.close();
          >
          > The iPlanet access log shows a POST request was received but when the request
          > is proxied to the WebLogic plugin, the error occurs. I can't tell if this is
          > a HTTP header problem or a data problem.
          >
          > Any help would be greatly appreciated.
          >
          > Thanks,
          >
          > Ken

Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
    User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.

Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Urgent reply Oracle HTTP Server failed

i am performing cloning of single node to single node server
I had applied perl adcfgclone dbTier it has completed
and while performing on apps tier
perl adcfgclone appsTier it has succeded with status 1
i.e all services are started but HTTP server failed to start

Hi;
1. What is ebs version
2. What is OS and DB version
3. post last 100 line for perl adcfgclone appsTier log file
4. Try to run autoconfig and check error message
5. Try to run adapachctl.sh manualy
Regard
Helios

SLD data supplier - HTTP call failed

Hi All,
I am receiving the following error when navigating to 'Server -> Services -> SLD Data Supplier' within the Visual Administrator
SLD_Collector_Task
HTTP call failed: Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there
The target SLD is started. How do I check if the SLD bridge is started?
Does anyone has any advice on this error? Thanks.

Hi Lee,
You can check this using t-code RZ70
Also read the post installation guide for how to configure sld bridge where your sld is running.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/500519bb-75bd-2a10-c9b7-878798ae52bc
Regards
Ashok
Edited by: Ashok Dalai on Sep 25, 2008 8:09 AM

HTTP Post WSDL in J2EE/HOME ?

A customer created a BPEL process which has a partner-link defined for a WSDL located in the same directory as the project's bpel.xml file. The partner-link is to perform a http post using http binding. (basically the WSDL points to a deployed Servlet)
When the process is initiated via the BPEL Console an error in the domain.log occurs stating that the WSDL cannot be found in j2ee/home.
The customer can use "wsdlLocation" and "wsdlRuntimeLocation" in bpel.xml, to work past the error but why are we searching for the WSDL in j2ee/home ?
The error:
<summary>Failed to read wsdl. Error happened when reading wsdl at
"HTTPPostService.wsdl", because "WSDLException: faultCode=PARSER_ERROR: Error
reading file at: file:/D:/AS/ORA10122MID/j2ee/home/HTTPPostService.wsdl:
D:\AS\ORA10122MID\j2ee\home\HTTPPostService.wsdl (The system cannot find the
file specified)". Make sure wsdl exists at that URL and is valid. </summary>
Thanks
Michael.

this sounds strange, and I never heard of it ..
can you get us a step by step tutorial to see if our support can reproduce this ..
which version are you using?
thank you,

ClassNotFoundException,open HTTP connection failed

Hai All,
when I try to run my applet in webpage the applet is notinited
& i found the following stacktrace in java Console:
Requesting URL: http://localhost/PCC/Applet/ImgDemo.class
load: class ImgDemo.class not found.
java.lang.ClassNotFoundException: ImgDemo.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
Is this a problem with classpath or OS or my code.
Thank you.

Hi mate.
You realise you double posted? Bad move :P
Your problem is with your HTML tagging; you need
<applet codebase="http://sitename.com/path/to/applet" code="ClassName.class" archive="ArchiveName.jar" width="500 height="460">
<param name=.... />
<param name=.... />
</applet>In the above, 'archive=...' is only necessary if you've jar'ed your applet, and obviously width and height you specify according to your needs.
HTH.

Where does firefox cache the form parameters to be used in the reload event of a page that was the resposne of a HTTP POST request?

Suppose there is form in a web page and it submits data in HTTP POST method. After submitting the form, if I reload the page [either by the refresh button or back button; whichever applicable], firefox asks permission to resend the form data by saying "To display this page, Firefox must send information that will repeat any action...". Now if the user clicks on the resend, firefox resubmits the form data.
So where does firefox store this from data for such future resending/resubmission?
Is it possible to retrieve/manipulate those stored form data?

I thought I'd tried that, as tried lots of other things like encoding URL, but obviously not as this works.
Thanks for the quick reply.
We also have an issue with the people results not being able to be refined by Department or Job Title now we have connected the SP2010 farm to use the service applications from a SP2013 farm.
Any ideas on this? I've started a new thread as its unrelated though:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c89d5463-4531-4a28-9586-1f690c7b580d/can-you-refine-people-search-results-using-a-sharepoint-2013-search-service-application-connected-in?forum=sharepointsearch

Sending a dom via http Post

Hi,
for some reason unknown to me whenever I try to send a dom via http Post I get the following error:
org.xml.sax.SAXParseException: The root element is required in a well-formed document.
This is the source code:
package com.cyberrein.payunion.transaction;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
//xml lib
import org.w3c.dom.Document;
import org.w3c.dom.Element;
//weblogic xml lib
import weblogic.apache.xerces.dom.DocumentImpl;
import weblogic.apache.xml.serialize.DOMSerializer;
import weblogic.apache.xml.serialize.XMLSerializer;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
public class Xmltest extends HttpServlet {
//Initialize global variables
public void init(ServletConfig config) throws ServletException {
super.init(config);
//Process the HTTP Request
public void service(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
// Retrieve transaction data from HttpServletRequest.
try {
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
dbf.setValidating(false);
DocumentBuilder db = dbf.newDocumentBuilder();
Document docIn = db.parse(request.getInputStream());
String code = "XX";
String tranID = "000000";
String message = "This Card Is Invalid. Transaction Discontinued";
//Output dom
Document docOut = new DocumentImpl();
Element e = (Element)docOut.createElement("TransactionResponseData");
e.setAttribute("Code", code);
e.setAttribute("TransactionID", tranID);
e.setAttribute("Message", message);
docOut.appendChild(e);
FileOutputStream fos;
fos = new FileOutputStream("/victory");
DOMSerializer serX = new XMLSerializer(fos,null);
serX.serialize(docIn);
DOMSerializer ser = new XMLSerializer(response.getOutputStream(), null);
     ser.serialize(docOut);
     } catch (Throwable e) {e.printStackTrace();}
//Get Servlet information
public String getServletInfo() {
return "com.cyberrein.payunion.transaction.Xmltest Information";
package com.cyberrein.payunion.transaction;
import org.w3c.dom.*;
import org.apache.xerces.*;
import org.apache.xerces.dom.*;
import org.apache.xerces.parsers.*;
import org.apache.xml.serialize.*;
import org.xml.sax.*;
import java.net.*;
import java.io.*;
public class CardClient {
private String sURI;
public BufferedReader in
= new BufferedReader(new InputStreamReader(System.in));
public CardClient(String serverURI) {
sURI = serverURI;
public Document test(){
Document docIn = null;
try
//XML Document impl
     docIn = new DocumentImpl();
//Create the root element
     Element t = docIn.createElement("TransactionData");
Element k = docIn.createElement("Payunion.com");
k.appendChild( docIn.createTextNode("North American server") );
t.appendChild(k);
//Set attributes
t.setAttribute("cardnumber", "4444444444444444");
t.setAttribute("amount", "3000.67");
t.setAttribute("name", "tolu agbeja");
t.setAttribute("cvv2", "001");
t.setAttribute("pu_number", "ejs:pupk:23456");
t.setAttribute("expirydate", "0903");
t.setAttribute("address", "100 peachtree industrial");
t.setAttribute("zipcode", "30329");
docIn.appendChild(t);
catch (Throwable te)
te.printStackTrace();
return docIn;
public Document sendRequest(Document doc) {
     Document docOut = null;
     try {
     URL url = new URL("http://" + sURI);
     HttpURLConnection conn = (HttpURLConnection) url.openConnection();
conn.setRequestMethod("POST");
     conn.setDoInput(true);
     conn.setDoOutput(true);
     OutputStream out = conn.getOutputStream();
BufferedReader br = new BufferedReader(new InputStreamReader(conn.getInputStream()));
XMLSerializer ser = new XMLSerializer( out, new OutputFormat("xml", "UTF-8", false) );
ser.serialize(doc);
while(!br.ready()){}
     DOMParser parser = new DOMParser();
     parser.parse(new InputSource(br));
     docOut = parser.getDocument();
catch (Throwable et)
     et.printStackTrace();
     return docOut;
public static void main(String []args)
CardClient c = new CardClient("cyber1:7001/xmltest");
try
Document doc = c.sendRequest(c.test());
Element responseMessage = (Element)doc.getElementsByTagName("TransactionResponseData").item(0);
String message = responseMessage.getAttribute("Message");
String tranID = responseMessage.getAttribute("TransactionID");
String code = responseMessage.getAttribute("Code");
System.out.println(message);
System.out.println("");
System.out.println("The Response Code Is: "+code);
System.out.println("");
System.out.println("The Transaction ID Is: "+tranID);
catch(Exception ex)
ex.printStackTrace();
All comments will be appreciated!!

Hi, thanks for your reply i knew the FileUplaod was the way forward.
I read topics advising to use the FileUpload and tried the following but it did not seem to work ( i get an HTTP Internal Server error when i try that):
try
DiskFileUpload upload = new DiskFileUpload();
boolean isMultipart = FileUpload.isMultipartContent(request);
if( isMultipart )
List items = upload.parseRequest( request );
Iterator iter = items.iterator();
while( iter.hasNext() )
FileItem fileItem = ( FileItem ) iter.next();
File uploadedFile = new File("myreceivedfile.zip");
fileItem.write( uploadedFile );
}catch (Exception e)
System.out.println("RECEIVER: " + e.getMessage());
Also DiskFileUpload,isMultipartContent and parseRequest have a line going through the middle (horizontal middle).
Edited by: Overmars08 on Jun 23, 2009 5:35 AM
Edited by: Overmars08 on Jun 23, 2009 5:36 AM

VMS/Autoupdate HTTP Post fail

Similar Messages

Maybe you are looking for