VMS Problem

Hi Dear,
I have my Nokia N72. I installed the VMS software in my mobile. But this is not woring well and is not uninstalling the software in the mobile. My mobile # is not working. Please tell me about this software and trick the uninstalling. Thanks

Have you changed the hostname recently. Check the information at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.0/user/guide/diagnos.html#wp1078582 for more information.

Similar Messages

  • Cisco VMS problem

    I have installed the cisco VMS 3.1 Enterprise edition but after installation. I am not able to open it in web page. I have checked all the services and it was running fine. But after the new installation, it is not opening in internet explorer. I have try with hostname adn IP address it is showing me following error
    Internal Server Error
    The server encountered an internal error or misconfiguration and was unable to complete your request.
    Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
    More information about this error may be available in the server error log.
    Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.

    Have you changed the hostname recently. Check the information at http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.0/user/guide/diagnos.html#wp1078582 for more information.

  • IDSM-2 and VMS problem with version software

    I use a IDSM-2 with software ver. 4...
    IDSM-2 is managing by VMS ver. 2.0.
    Since 2006 I couldn't taking new signature
    What can I do to upgrade IDSM to higher version ( IPS ver 5...) and which version VMS manage properly IDSM-2 with version software 5...
    I still have a maintenance SMART NET to 2008 year.
    If I need upgrade what can I do.
    Mirek

    Hi John Thank you for your Reply,
    On my jsp page, i get the warning reference, " backingBeanScope.mybean.varname" not found.
    In expression builder, though I can see and select the BackingBean but i can not see the below variables!!!!
    It appears only the Beanname and not the plus sign to expand it.
    This happens only for backingbeanScope...
    best regards

  • RAC 10g on Linux VMs problems with smp

    I'm following Vincent Chan's article "Install Oracle RAC 10g on Oracle Enterprise Linux Using VMware Server" in order to get up to speed on Oracle RAC on Linux. I've had good success so far but it appears that when the kernel was created it was created as smp even though I only had processor count set to 1. I went on to choose the oracleasm-2.6.9-42.0.0.1EL driver for UP kernel not realizing I had an smp kernel. Now that I'm trying to create ASM disks I get the following message:
    Writing Oracle ASM library driver configuration: [ OK ]
    Loading module "oracleasm": Unable to load module "oracleasm"
    [FAILED]
    I'm assuming this problem is due to the wrong asm driver being installed.
    So my question is, since I truly have a single processor virtual machine, should I try to rebuild the kernel as UP? Or should I try to re-install the smp version of oracleasm and keep the kernal as smp with 1 processor?
    Additional info:
    # rpm -qa | grep asm
    ibmasm-3.0-7
    oracleasm-support-2.0.3-2
    oracleasmlib-2.0.2-1
    oracleasm-2.6.9-42.0.0.0.1.EL-2.0.3-2
    # uname -r
    2.6.9-42.0.0.0.1.ELsmp

    Hi Frits,
    I had the same problem but could not find the right rpm.
    Can you give the URL?
    My problem:
    [root@rac2 ~]# /etc/init.d/oracleasm configure
    Configuring the Oracle ASM library driver.
    This will configure the on-boot properties of the Oracle ASM library
    driver. The following questions will determine whether the driver is
    loaded on boot and what permissions it will have. The current values
    will be shown in brackets ('[]'). Hitting <ENTER> without typing an
    answer will keep that current value. Ctrl-C will abort.
    Default user to own the driver interface []: oracle
    Default group to own the driver interface []: dba
    Start Oracle ASM library driver on boot (y/n) [n]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [  OK  ]
    Loading module "oracleasm": Unable to load module "oracleasm"
    [FAILED]
    [root@rac2 cmshare]# uname -r
    2.6.9-42.0.0.0.1.ELsmp
    [root@rac2 cmshare]# rpm -qa | grep oracleasm
    oracleasmlib-2.0.2-1
    oracleasm-support-2.0.3-2
    oracleasm-2.6.9-42.0.0.0.1.EL-2.0.3-2
    Regards,
    Chungmen

  • VMS Client Channel Buffering Problem

    I just received my new Verizon VMS system which includes 2 client units.  I hooked everything up and all was working as it should except that when watching live TV on the two client units, it will not buffer two different TV channels and allow me to switch back and forth between these two channels and rewind, fast forward or pause.  It will only buffer one channel and when I switch to another, the original channels buffer is gone.  I could do this on all three of my standard HD DVR boxes before swithcing to the VMS and this was a huge feature for me as I like to watch multiple shows or sporting events simultaneaously.  I called support and after about 90 minutes they could find no problem or find any solution other then to send me a new VMS.  The odd thing is when they looked at all of the tuners being used, tuners 3 annd 4 were never getting used.  The odder thing is that it seemed to work properly on one of the client boxes until they did a cold init and then that one also stopped allowing 2 channels to be buffered.
    Should I be able to buffer two seperate channels on the client boxes as well as the main VMS box or did they for some awful reasone take this feature away from the clients??
    Thanks,
    Eric

    DOES VMS DO THESE THINGS FOR YOU ?
    VZ  VMS1100 Video Media Server
    From Pg of 2 of Manual
    The VMS1100 provides the following advanced functionality:
    • Whole home DVR support for up to four connected IP Client set-top boxes
    • Authorization and purchase of on-demand programming
    • High-Definition television (HDTV) video decoding
    • HDTV output through component video (YPbPr) or High-Definition Multimedia Interface™ (HDMI™)
    • Surround-sound audio through a variety of analog and digital interconnection options
    Live playback and LOD buffering capabilities to pause and time shift live video and seamlessly record for
    all connected televisions
    • Built-in MoCA 1.1/2.0 HW support
    As with all ARRIS digital set-tops, the hardware features are enabled by core operating and third-party
    application software.
    Tom
    Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
    Data Object 39.45

  • HyperV 2012 R2 Failover cluster, HV problem, all VMs restart

    Hello, I have 2 node Failover cluster with two nodes, Hyperv 2012, multipath SAS storage MSA2000. But hardware problem with one node (node2). It shutdown unexpectly. When It hapens NODE1 restar all VMs it is normal? It was configured by cluster validation
    tool. There is no witness. I don't clearly understand what happens if one node crash. KR.

    As Eric has said it will start the VM's in a crash consistent state on the non crashed host.
    But from your example I take your seeing your guests on the non crashed host restart. If this is the case I would say yes! I have seen this happen before. It can happen if your not using quorum because only one node has a vote. I would recommend you create
    a witness, on your MSA 2000 carve out 1 GB and do a disk witness. Or if you have a server not in the VM cluster you could do a file share witness, file share is my preferred. Once you have a witness in play you will see all of your hosts having a vote. Look
    in the cluster manager at the nodes section. You should see a vote column. Currently it will say 1/0, once the witness is created it will show 1/1.

  • Problem with VMS 2.2 w/ IDS MC 1.2.3

    Hi,
    We've been trying to get our new Cisco IDS 4235 sensor + VMS Basic to work for the last few days but with no success:
    1) Install CiscoWorks VMS Common Services 2.2 with SP2 with the supplied vms 2.2 startup disk
    2) Install IDS MC 1.2.3 from the startup disk
    3) Upgrade our IDS 4235 to the latest IDS signature
    - upgrade from 4.1(1)S47 to sp-4.1-4-S91
    - upgrade from sp-4.1-4-S91 to sig-4.1-4-S131
    4) Apply IDS-sig-4.1-4-S131.zip Sig Update on IDS MC 1.2.3
    5) Successfully add our ids-4235 sensor with IDS MC using auto discover setting
    6) IDS Security Monitor shows TLS-Connected status, etc
    The issues we're facing:
    1) unable to view any generated reports
    - it's forever under the scheduled report tab
    2) unable to view any ids events
    The funny thing was we managed to generate and view reports on our first installation but an ids signature update went wrong forced us to reinstall the whole thing (including Win2k).
    Is it because we apply IDS-sig-4.1-4-S131.zip without applying the sp-4.1-4-S91 on the IDS MC first?
    IS the IDS MC 1.2.3 download available at cisco.com the same version as the one included in the startup disk? ( I think ours was IDS MC 1.2.3.1224)
    Do I need to apply the Update 1 patch?
    ( I don't think so since we're already on CS 2.2 w/ SP2 )
    Many thanks for any help.

    Go directly to the IDS Device Manager panel (not the VMS) and check whether the sensor is generating reports. If its ok check VMS logs(audit log?) for errors in communicating with IDS/generating SecMon view.
    I had couple updates go wrong, the only thing to do was to reimage the sensor and reinstall all updates on it.
    You can try to protect your self from future problems with updates, try searching the forum for the link provided by cisco employee, which gives a 4-1(4)e patch to the sensor, which *might* fix the problem with later updates :)

  • Problem Adding IDS in VMS 2.2

    i am trying to add the IDS 4215 and IDSM module which is giving me the following error.
    This sensor is version 4.1(4)S119 which is not known to the system. Install a Signature update to the system and retry
    the procedure which i have followed is
    1. Install common services
    2. install ids MC and Security Monitor
    3. Install update 1 for VMS
    then i tried to add the devices.
    i am attaching the image of error. i have erase the name due to security reasons

    Make sure that you the signature level of the Sensor that you are trying to add is in the path C:\Program
    Files\CSCOpx\MDC\etc\ids\updates on the VMS server. Next, log into IDSMC and go to Configuration | Updates | Update Network IDS Signatures and Apply this signature level. Then go to devices | Sensor and try to add then new sensor
    and make sure you checked "Discover Settings".
    Try this link:
    http://www.cisco.com/en/US/products/sw/cscowork/ps2330/products_qanda_item09186a00801dac10.shtml

  • VMS 2.2 installation problem 90 days

    Hello ,
    i have tried to install vms 2.2 90 day evaluation from files dowloaded from CCO ( 1 zip and 3 other files ), but i have not found any explanations how to install and the product.
    I have unzipped a files but during the unzip but appear a request to insert a cd1 without any possibility.
    How i can install the product ?
    any suggestion is appreciate
    Massimo

    Try this: Download all the 4 files into a single directory. Use PowerArchiver to extract the files (http://www.powerarchiver.com/). Check the file size by right-clicking on the file and ensure that it matches the file size mentioned on the download page. Using File Explorer, double-click the zip file and extract to the directory to which the files are originally copied. Go to the directory to which the files have been extracted and double-click 'Setup.exe'. Start by installing only Common Services. The other components can be installed later as required.

  • Oracle 11gR2 RAC system Network Connection Problem among VMs

    Folks,
    Hello.
    I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
    I configure Network for rac1 and rac2 as following:
    rac1 eth0 192.168.138.35 eth1 192.168.137.35
    rac2 eth0 192.168.138.36 eth1 192.168.137.36
    [root@rac2 \]# ping rac1
    output: 64 bytes from rac1.localdomain (127.0.0.1) ... ...
    [root@rac1 \]# ping rac2
    Error: Ping rac2.localdomain... ... Destination Host Unreachable.
    My questions are:
    First, Why rac1 cannot reach rac2 while rac2 can reach rac1 ?
    Second, How to have rac1 reach rac2 ?

    Folks,
    Hello. Thanks a lot for replying.
    The public IP for eth0 and private IP for eth1 in the file "/etc/hosts" are as follows:
    rac1 eth0 192.168.138.35 eth1 192.168.137.35
    rac2 eth0 192.168.138.36 eth1 192.168.137.36
    In rac1, I have added 2 entries in /etc/hosts as following:
    #VIP for eth0
    192.168.138.130 rac1-vip.localdomain rac1-genetic-vip
    192.168.138.131 rac2-vip.localdomain rac2-cellar-vip
    Then I execute the command: [root@rac1 /]# ping rac2
    Output:
    PING rac2.localdomain (192.168.138.36) 56(84) bytes of data
    From rac1.localdomain (192.168.138.35) icmp_seq=1
    Destination Host Unreachable
    In rac2, I try to add the above 2 entries in /etc/hosts. But cannot save it. The following error message comes up:
    "E45: readonly option is set (add ! to override)".
    My questions are:
    First, do I need to add VIP in the file "/etc/hosts" for both rac1 and rac2 ?
    Second, why rac1 still cannot reach rac2 after add VIP in /etc/hosts for rac1 ?
    Third, why the file "/etc/hosts" in rac2 is read-only ? How to change it to be editable ?
    Thanks.

  • New VMS/IPC boxes - speed and pricing

    For the most part, I've been a very happy FiOS customer. The internet side has gone out exactly once in the year I've had the service, and it was restored within an hour. TV has dropped out twice, both times very late at night (I assume for head-end maintenance). Reliability is better than every other ISP I've ever had, combined.
    That said..
    I wanted to snag another STB for the house - found out the local stores had all been closed (I can understand why from the financial aspect, but it was still a shock pulling up to my old store to pick up another STB.. and finding a "for lease" sign, when I'd been by there 2 months prior), so I looked at options online. The new VMS + IPC boxes looked promising, especially since they added the ability for the entire house to pause, rewind, schedule recordings, etc, from any TV - instead of only the DVR being able to do that (though the old boxes could stream recordings from the DVR).
    My chief complaint so far - while the VMS box itself is responsive, the IPC boxes are painfully slow to respond to anything. Picture quality is fantastic, but using them feels, to put it in nerd terms, like using a Pentium 90 with Windows XP and 128MB RAM. They take 5+ to respond to anything more than a channel change (and even that takes up to 3 seconds), and frequently "lose" remote key presses if you try to, say, hit guide, hit page down, then try to arrow down to the channel that you know is on the next page. It literally feels like a throwback to the earliest digital set top boxes from Comcast/Time Warner - the first ones with built-in TV listings in the mid 1990s. The speed is right on par with them; the only thing faster right now is they don't shut down for 30 minutes a day to update the TV listings.
    I've gone through the built-in diagnostics on the boxes to verify signal levels - they're decent (not perfect, but this is a 20 year old house with mostly original coax), but we have no pixelation or picture drop-out, so I would think they could carry the basic stuff between the IPC boxes and VMS pretty easily. The router certainly has no problem handling the 75/35 on the same coax (speedtest shows 85-90 down, 35-40 up, with a ~5ms ping, no matter which cable outlet it's plugged into)..
    My other complaint - why did Verizon move to "rooms" for pricing? I thought I was getting a DVR plus 3 STBs (since I ordered 3 STBs and asked for a DVR), instead of a VMS + 2 STBs - and I'm paying much more than I did for the old DVR + 2 STBs.
    With the griping out of the way - is there a reasonable chance that firmware updates will help with the speed of the IPC boxes? Or is there a chance it's a cabling issue? (I have no problem pulling new coax or cat5e, and I can provide signal levels if that'll help) If not, is there any chance of getting the old QIP7232 DVR + QIP7100 box back (and adding another 7100), and switching back to what I was paying before? I know they're a bit antiquated (especially the 7100s), but they were much more responsive, and didn't make me want to throw the STBs through the window. It just seems really rediculous that I'm paying such a large premium (plus the "upgrade fee") for equipment that, in terms of the user experience, is much worse.
    Again.. been a happy customer for a long time, but the new terminals are super painful to use.
    Thanks.

    If this is the case.  I think I will wait till the bugs are worked out
    Question what were you paying before and after for the boxes.   So what was the old DVR + 2 STB's and the new DVR plus 2 stb's
    Trying to get an idea of what you meant by way more.  Most people said same pricing and a small $20 or so upgrade fee

  • Database Instance Installation Problem on Oracle 8.1.7

    Dear gurus,
    I'm having problem when installing Database Central Instance on Solaris 10 - Oracle 8.1.7 (32bit) - SAP 4.6c.
    Here's the error log:
    Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    Connected.
    Echo                            ON
    SVRMGR> SET TERMOUT ON;
    Termout                         ON
    SVRMGR> SHUTDOWN ABORT;
    ORACLE instance shut down.
    SVRMGR> STARTUP NOMOUNT PFILE=init.ora;
    ORA-27123: unable to attach to shared memory segment
    SVR4 Error: 22: Invalid argument
    Additional information: 1
    Additional information: 3
    SVRMGR> CREATE DATABASE PRD
         2> CONTROLFILE REUSE
         3> MAXDATAFILES  254
         4> MAXLOGFILES   255
         5> MAXLOGHISTORY 1000
         6> MAXLOGMEMBERS 3
         7> MAXINSTANCES  50
         8> CHARACTER SET "WE8DEC"
         9> DATAFILE
        10> '/oracle/PRD/sapdata1/system_1/system.data1' SIZE 300M REUSE
        11> NOARCHIVELOG
    Info: DBCREATEDB_IND_ORA SvrmgrDoDummy 2 349
        12> LOGFILE
        13> GROUP 11 (
        14> '/oracle/PRD/origlogA/log_g11m1.dbf',
        15> '/oracle/PRD/mirrlogA/log_g11m2.dbf'
        16> ) SIZE 20M REUSE
        17> ,GROUP 13 (
        18> '/oracle/PRD/origlogA/log_g13m1.dbf',
        19> '/oracle/PRD/mirrlogA/log_g13m2.dbf'
        20> ) SIZE 20M REUSE
        21> ,GROUP 12 (
        22> '/oracle/PRD/origlogB/log_g12m1.dbf',
        23> '/oracle/PRD/mirrlogB/log_g12m2.dbf'
        24> ) SIZE 20M REUSE
        25> ,GROUP 14 (
        26> '/oracle/PRD/origlogB/log_g14m1.dbf',
        27> '/oracle/PRD/mirrlogB/log_g14m2.dbf'
        28> ) SIZE 20M REUSE
        29> ;
    CREATE DATABASE PRD
    ORA-01034: ORACLE not available
    SVRMGR> EXIT
    Server Manager complete.
    Error: DBCREATEDB_IND_ORA InternalInstallationDo 2 349
    Create Database failed errorcode = 27123.
    Error: DBCREATEDB_IND_ORA InstallationDo 2 349
    Phase failed.
    Error: Main {} 2 349
    Installation aborted.
    I have tweaked the shared memory max as suggested in Oracle Manual / SAP Installation Guide, to no avail.
    The listener is up already.
    When I logged in as user ORA<SID>, and go to svrmgrl > startup nomount pfile=init.ora, it can startup without hassle.
    Although the Product is not supported in PAM, we have another machine running smoothly for years with this product combination, so it's not the product compatibility issues.
    But when using R3SETUP -f DATABASE.R3S, the phase stopped with the log pasted above.
    Any ideas, gurus?
    Thanks for help.
    Best Regards,

    Mr. Markus, there's no file on saptrace/usertrace.
    To be sure, here's what I've done:
    1. Run oracle listener.
    2. Check connection with svrmgrl > connect internal (connected).
    3. Modify init.ora with my DB Name:
    wef
    # replace DEFAULT with your database name
    *db_name=PRDDB*
    db_files = 80                                                         # SMALL 
    # db_files = 400                                                      # MEDIUM
    # db_files = 1500                                                     # LARGE 
    db_file_multiblock_read_count = 8                                     # SMALL 
    # db_file_multiblock_read_count = 16                                  # MEDIUM
    # db_file_multiblock_read_count = 32                                  # LARGE 
    db_block_buffers = 100                                                 # SMALL 
    # db_block_buffers = 550                                              # MEDIUM
    # db_block_buffers = 3200                                             # LARGE 
    shared_pool_size = 3500000                                            # SMALL
    # shared_pool_size = 5000000                                          # MEDIUM
    # shared_pool_size = 9000000                                          # LARGE
    log_checkpoint_interval = 10000
    processes = 50                                                        # SMALL 
    # processes = 100                                                     # MEDIUM
    # processes = 200                                                     # LARGE 
    parallel_max_servers = 5                                              # SMALL
    # parallel_max_servers = 4 x (number of CPUs)                         # MEDIUM
    # parallel_max_servers = 4 x (number of CPUs)                         # LARGE
    log_buffer = 32768                                                    # SMALL
    # log_buffer = 32768                                                  # MEDIUM
    # log_buffer = 163840                                                 # LARGE
    # audit_trail = true            # if you want auditing
    # timed_statistics = true       # if you want timed statistics
    max_dump_file_size = 10240      # limit trace file size to 5 Meg each
    # Uncommenting the line below will cause automatic archiving if archiving has
    # been enabled using ALTER DATABASE ARCHIVELOG.
    # log_archive_start = true     
    # log_archive_dest = disk$rdbms:[oracle.archive]
    # log_archive_format = "T%TS%S.ARC"
    # If using private rollback segments, place lines of the following
    # form in each of your instance-specific init.ora files:
    # rollback_segments = (name1, name2)  
    # If using public rollback segments, define how many
    # rollback segments each instance will pick up, using the formula
    #   # of rollback segments = transactions / transactions_per_rollback_segment
    # In this example each instance will grab 40/5 = 8:
    # transactions = 40
    # transactions_per_rollback_segment = 5
    # Global Naming -- enforce that a dblink has same name as the db it connects to
    global_names = TRUE
    # Edit and uncomment the following line to provide the suffix that will be
    # appended to the db_name parameter (separated with a dot) and stored as the
    # global database name when a database is created.  If your site uses
    # Internet Domain names for e-mail, then the part of your e-mail address after
    # the '@' is a good candidate for this parameter value.
    # db_domain = us.acme.com       # global database name is db_name.db_domain
    # FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
    # vms_sga_use_gblpagfil = TRUE
    # FOR BETA RELEASE ONLY.  Enable debugging modes.  Note that these can
    # adversely affect performance.  On some non-VMS ports the db_block_cache_*
    # debugging modes have a severe effect on performance.
    #_db_block_cache_protect = true                       # memory protect buffers
    #event = "10210 trace name context forever, level 2" # data block checking
    #event = "10211 trace name context forever, level 2" # index block checking
    #event = "10235 trace name context forever, level 1" # memory heap checking
    #event = "10049 trace name context forever, level 2" # memory protect cursors
    # define parallel server (multi-instance) parameters
    #ifile = ora_system:initps.ora
    # define two control files by default
    control_files = (ora_control1, ora_control2)
    # Uncomment the following line if you wish to enable the Oracle Trace product
    # to trace server activity.  This enables scheduling of server collections
    # from the Oracle Enterprise Manager Console. 
    # Also, if the oracle_trace_collection_name parameter is non-null,
    # every session will write to the named collection, as well as enabling you
    # to schedule future collections from the console.
    # oracle_trace_enable = TRUE
    # Uncomment the following line, if you want to use some of the new 8.1
    # features. Please remember that using them may require some downgrade
    # actions if you later decide to move back to 8.0.
    #compatible = 8.1.0
    3. set shared memory parameter as in sapnote 724713.
    4. executing R3SETUP
    and it tells me this error:
    Info: DBCREATEROLLSEGSTART_IND_ORA SyGroupIDGet 2 354
    Group id for group dba is 102.
    Info: DBCREATEROLLSEGSTART_IND_ORA SyUserIDGet 2 354
    User id for user oraprd is 100.
    Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
    Return from DB: 1034.
    Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
    Oracle Server Manager Release 3.1.7.0.0 - Production
    Copyright (c) 1997, 1999, Oracle Corporation.  All Rights Reserved.
    Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    SVR4 Error: 2: No such file or directory
    Server Manager complete.
    Info: DBCREATEROLLSEGSTART_IND_ORA InternalInstallationDo 2 354
    Startup Database.
    Info: DBCREATEROLLSEGSTART_IND_ORA OracleCmd 2 354
    Startup Database with PFILE: init.ora.
    Info: DBCREATEROLLSEGSTART_IND_ORA SyCoprocessCreateAsUser 2 354
    Creating coprocess /oracle/PRD/817_32/bin/svrmgrl [email protected]  as user oraprd and group dba ...
    Info: DBCREATEROLLSEGSTART_IND_ORA SyGroupIDGet 2 354
    Group id for group dba is 102.
    Info: DBCREATEROLLSEGSTART_IND_ORA SyUserIDGet 2 354
    User id for user oraprd is 100.
    Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
    Return from DB: 27123.
    Info: DBCREATEROLLSEGSTART_IND_ORA SvrmgrDoDummy 2 354
    Oracle Server Manager Release 3.1.7.0.0 - Production
    Copyright (c) 1997, 1999, Oracle Corporation.  All Rights Reserved.
    Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    Connected.
    ORA-27123: unable to attach to shared memory segment
    SVR4 Error: 22: Invalid argument
    Additional information: 1
    Additional information: 2
    alter database noarchivelog
    ORA-01034: ORACLE not available
    alter database open
    ORA-01034: ORACLE not available
    Server Manager complete.
    Error: DBCREATEROLLSEGSTART_IND_ORA InternalInstallationDo 2 354
    Startup Database with error: 27123.
    Error: DBCREATEROLLSEGSTART_IND_ORA InstallationDo 2 354
    Phase failed.
    Error: Main {} 2 354
    Installation aborted.
    It's driving me nuts for the last days.. can't figure out what happened here.

  • Voice mail problems

    At times my voice mail has significant delays in downloading. I see the messages, but when selecting, the spinning circle that replaces the play/pause button just keeps spinning. Then when the message starts to play, it stops several times while waiting to download.
    Is this an AT&T edge problem?

    I'm not 100% sure, but I think that VMs are downloaded to the iPhone before you see them in the VVM list. I say this because if you are out of signal or are in airplane mode, you can listen to the VVMs without issue.
    If yours are playing with issues, I would suggest restarting the phone, and if that doesn't help, restoring it. If neither helps, make an appointment with a Genius at an Apple Store, because that's an issue that shouldn't happen.

  • VMS File Extensions

    Hi,
    We have MacOS and Win 95 boxes talking to an Alpha running OpenVMS.
    Our Forte applications run some reports on the Alpha box, due to
    their size etc. However, we want the users (on the PCs) to be able to
    manipulate the resulting files as necessary. At the moment we get a
    list of the files in a "user" directory and display that on the
    screen. Unfortunately, we can't seem to get the version numbers of the
    files (it isn't in the suffix, where I would expect it to be). This is important, as the
    User needs to know which file is the latest version (or the previous one etc).
    Does anybody have any way of getting the version number for a VMS
    file in Forte?
    Thanks in advance
    Derek Rendall
    University of Otago
    New Zealand

    Elevlyn,
    Thank you for fully explaining the situation. Now I can suggest you try this .ged reader.
    1) Make a backup of your ged file.
    2) Download the reader, and run a virus scan on the program before you run the the installer.
    3) Test the reader
    4) Please report back the progress. What the reader OK?
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • VMS 1100 and Slingbox

    rataylor wrote:
    Thanks! Is STB the same as the new VMS server box? (Will it even work with the client box?)Lots of terms there.  A DVR including the new VMS boxes is a STB.  However the older Verizon STB's and DVR's will not work the VMS box.  Only the new IP boxes work with the VMS box.   And the IP boxes will not work without at least one VMS box.  The previous STB did not have to have a DVR box in order to work.

    Thanks for the suggestions. I think the problem is my Slingbox is the original "SOLO" model and the new FIOS equipment uses 1080i for signal. It would probably work if I got the new Slingbox 500 which also uses 1080i. One last question....if the Client & TV are hooked up via HDMI and the SOLO is connected to the Client with the component cables, can it send a signal to both units or does it have to be connected one or the other? I know it worked set up like that with the old DVR I had but I think that had more than one tuner whereas I've read the client just has one.

Maybe you are looking for

  • Can you use a gift card attached to your account to gift a song to another person?  if so how?

    I have an itunes balance of 5.23 and it tells me to enter a method of payment in order to gift a song.  I wanted to gift a song to my aunt.  Niki

  • How can you execute a function while the mouse is over a button.

    I've got a movieclip I want to move across the screen on the x axis to the left or right depending on which button the user hovers their mouse over. I thought I could do this with the following: right_btn.addEventListener(MouseEvent.MOUSE_OVER, moveR

  • Logitech marble mouse

    i am already on my second mighty mouse. the first had to be replaced under warranty. my second mouse has had issues that cleaning wont help so i am going to buy something completely different. i am considering the logitech marble mouse. i like the fa

  • Database views are missing

    Post Author: dee7231 CA Forum: Data Connectivity and SQL We have an ODBC connection to an Oracle database.  There are 7 views that are created.  However when we try to pick the view from the table selection in crystal, we see the tables but not the v

  • Can not make smart playlists anymore?

    Since a few weeks I'm not able anymore to make smart playlists.  It just doesn't appear anymore in the menu 'File'.  Also I am not able to change the names of the existing smart playlists.  Why do I have this problem and how to fix it?