VMware and RAC
hi gurus,
we are trying to setup RAC on a vmware environment in a test environment to learn the rac configuration as
we dont have enough budget for multiple h/w. we would be using a windows machine to try this
experts who has done this kind of implementation please help me in,
a)does the freeware vmware GSX support oracle rac or we need to purchase ESX?
b)any case studies or documents related to rac config on vmware GSX/ESX
c)i guess, in the case of VMware we need not require any SAN/NAS, right?
many thanks,
charles
Hope you realize that Oracle Support policy, described in Metalink note 249212.1, may result in you being unsupported for specific issues. Basically you need to reproduce the issue outside of VMWare to get support.
A better variant might be to look at Oracle's VM.
Similar Messages
-
RAC database cannot be connected after Grid and RAC DB have been installed
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
I have run the commands as below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ ./crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ ./srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$ ./sqlplus SYS/SYS
SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYS
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
Enter user-name: SYSTEM
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
[ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
In its GUI, the inputs are below:
Connection: C1
Username: SYS
PWD: SYS
Role: SYSDBA
Connection Type: Basic
Hostname: rac2.localdomain
Port: 1521
SID: racdb2
Test: failed. Network Adapter could not establish connection.
Browser url: https://rac2.localdomain:1158/em
Its output: cannot connect to the server at https://rac2.localdomain:1158/em
As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
My question is:
Do any folks understand how to solve the above 4 problems ?
Thanks.Folks,
Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
[ora11g@rac1 cssd]$ pwd
/u01/app/grid/log/rac1/cssd
[ora11g@rac1 cssd]$ ls
cssdOUT.log ocssd.log ocssd.trc
[ora11g@rac1 cssd]$ cat ocssd.log
2012-03-08 21:13:54.415: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:55.418: [ CLSF][1150617920]Allocated CLSF context
2012-03-08 21:13:55.418: [ SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.418: [ CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Closing handle:0x710d800
2012-03-08 21:13:55.470: [ SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
2012-03-08 21:13:55.470: [ CLSF][1150617920]Destroying CLSF context
2012-03-08 21:13:56.472: [ CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
2012-03-08 21:13:56.608: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.697: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:56.754: [ CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
2012-03-08 21:13:57.425: [ CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.559: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
2012-03-08 21:13:57.860: [ CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
2012-03-08 21:13:58.049: [ CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [ CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Environment is production
2012-03-10 12:07:08.300: [ CSSD][471957248]clssscmain: Core file size limit extended
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:07:08.518: [ CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:07:08.519: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:07:09.675: [ CSSD][471957248]clssscmain: Running as user ora11g
[ clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:07:09.821: [ clsdmt][1088276800]PID for the Process [5971], connkey 4
2012-03-10 12:07:09.822: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:07:09.823: [ CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:07:09.847: [ CSSD][471957248]clssscmain: initgminfo done
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmclientlsnr: Spawned
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
2012-03-10 12:07:09.971: [ CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
2012-03-10 12:07:09.973: [ CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:07:09.975: [ CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:07:09.975: [ GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [ CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Environment is production
2012-03-10 12:21:34.612: [ CSSD][4216872704]clssscmain: Core file size limit extended
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-10 12:21:34.675: [ CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-10 12:21:34.676: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-10 12:21:34.770: [ CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-10 12:21:34.771: [ CSSD][4216872704]clssscmain: Running as user ora11g
[ clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-10 12:21:37.926: [ clsdmt][1123064128]PID for the Process [6687], connkey 4
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-10 12:21:38.276: [ CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-10 12:21:39.171: [ CSSD][4216872704]clssscmain: initgminfo done
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmclientlsnr: Spawned
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
2012-03-10 12:21:42.815: [ CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
2012-03-10 12:21:42.822: [ CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-10 12:21:42.872: [ CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-10 12:21:42.873: [ GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [ CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Environment is production
2012-03-11 11:17:15.418: [ CSSD][1249378048]clssscmain: Core file size limit extended
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 11:17:15.797: [ CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 11:17:15.798: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 11:17:17.472: [ CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 11:17:17.473: [ CSSD][1249378048]clssscmain: Running as user ora11g
[ clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 11:17:17.517: [ clsdmt][1098090816]PID for the Process [5960], connkey 4
2012-03-11 11:17:17.573: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 11:17:17.574: [ CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 11:17:17.586: [ CSSD][1249378048]clssscmain: initgminfo done
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmclientlsnr: Spawned
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
2012-03-11 11:17:17.617: [ CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
2012-03-11 11:17:17.619: [ CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 11:17:17.621: [ CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 11:17:17.621: [ GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [ CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Environment is production
2012-03-11 13:50:45.589: [ CSSD][1847344896]clssscmain: Core file size limit extended
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 13:50:45.812: [ CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 13:50:45.813: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 13:50:46.364: [ CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 13:50:46.365: [ CSSD][1847344896]clssscmain: Running as user ora11g
[ clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 13:50:46.512: [ clsdmt][1106819392]PID for the Process [5598], connkey 4
2012-03-11 13:50:46.518: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 13:50:46.521: [ CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 13:50:46.548: [ CSSD][1847344896]clssscmain: initgminfo done
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmclientlsnr: Spawned
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
2012-03-11 13:50:46.611: [ CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
2012-03-11 13:50:46.618: [ CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 13:50:46.621: [ CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
2012-03-11 13:50:46.621: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 13:50:46.622: [ GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [ CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
2012-03-11 14:15:32.383: [ CSSD][2372304640]clssscmain: Environment is production
2012-03-11 14:15:32.384: [ CSSD][2372304640]clssscmain: Core file size limit extended
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2012-03-11 14:15:32.933: [ CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
2012-03-11 14:15:32.935: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2012-03-11 14:15:48.413: [ CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
2012-03-11 14:15:48.421: [ CSSD][2372304640]clssscmain: Running as user ora11g
[ clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
2012-03-11 14:16:21.102: [ clsdmt][1119824192]PID for the Process [7155], connkey 4
2012-03-11 14:16:22.219: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
2012-03-11 14:16:22.221: [ CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
2012-03-11 14:16:27.367: [ CSSD][2372304640]clssscmain: initgminfo done
2012-03-11 14:16:43.377: [ CSSD][1140803904]clssgmclientlsnr: Spawned
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
2012-03-11 14:16:43.378: [ CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
2012-03-11 14:16:43.389: [ CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
2012-03-11 14:16:43.554: [ CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
2012-03-11 14:16:43.555: [ GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
My question is:
Could any folk find out the problem that Grid becomes not running after install RAC database ?
Thanks. -
Installed helpdesk to sles11sp1 vmware and won't startup
Hi,
I installed the service desk to sles11sp1 for vmware and it won't startup.
I am also running zenworks configuration mgmt 11 RC3 on the same server.
I installed with:
java -install install.jar -console
When prompted for a port I took the default 8700. It gave me a null and then prompted for a 1 to continue. So I selected 1 and continued.
If I http://ip:8700 I get nothing.
If I netstat -a -n|grep 8700 I get nothing.
What do I need to do to get this to work? Also I thought I could get this service desk integrated with zenworks configuration management?
GwenOriginally Posted by gleahy
got it. The startup.sh doesn't execute automatically.
How could I start the script automatically (may be by runlevel)?
I have no Idea -
Windows 7 and a mac and vmware and internet connection challenges
Hello
I have a macbook pro that I bought this year. Loaded vmware and win xp on it. Tried to load win 7 on it and it went well. Now it seems I can't connect to the internet. I removed all the preloaded pc security to zero, so I believe this isn't the issue.
Went to the device manager and see that the ethernet has issues. Looks like the drivers are out of date, or not functioning. When I looked on the mac side under utilities, I see its a broadcom 57765-BO ethernet card. I believe I got the correct one from broadcom, but it still didn't work? Its strange because the ethernet and wifi work on the mac side but not on the win 7 side?
Any suggestions for making this work?
Thanks
KeithAre you saying you loaded Windows 7 using Fusion? If so, you should seek answers in the Fusion or Windows forums. Your issue has nothing to do with OSx or Apple. Neither does it have anything to do with Apple software compatibility with Windows.
If you are running Windows in a virtual machine your Apple hardware is not relevant to your issue. Fusion creates virtual hardware. The best way to get support for virtual machines is to go to the virtual machine's web site and look in their support.
If the Windows drivers are out of date, from within Windows update the drivers. -
Installation of Solaris 10 on VMware and on external HDD
Greetings,
I am having laptop , having 512 MB RAM, AMD Turion 64 processor.
I purchased a new external HDD, I want to install VMWARE and then I want to install solaris 10 in VMWARE on my external HDD.
I want your suggestion that whether I can install solaris 10 on this configuration and if I can configure can I configure Oracle 11g software???
As of I am new to this one, your suggetions will be so helpful for me.
Thanks & Regards
Kaushal.user8856758 wrote:
Greetings,
I am having laptop , having 512 MB RAM, AMD Turion 64 processor.
I purchased a new external HDD, I want to install VMWARE and then I want to install solaris 10 in VMWARE on my external HDD.
I want your suggestion that whether I can install solaris 10 on this configuration and if I can configure can I configure Oracle 11g software???
As of I am new to this one, your suggetions will be so helpful for me.
Thanks & Regards
Kaushal.(1) To be blunt you dont have enough RAM for starters. You might get aware with 2GB, you probably really need 3GB or perhaps 2.5GB might just do.
(2) VMware is a company who produce several products, i assume you are talking about VMware server ... but I may be wrong.
(3) I assume you are retaining a windows OS on your laptop., but again i could be wrong.
Its not really in my nature to have Oracle Databases on external USB drives, but this stack will probably just work. (Simply because VMmare server will use a simply file for its virtual disk(s) on the USB)
I would also not be surprised if you has issues with the Solaris graphics.
In general I suspect your auggested setup may be at the least troublesome.
What I have said above are opinions, it is not fully researched and I accept corrections. -
Install CRS and RAC with different users
I' m tring to install CRS and RAC with different users.
It is supported but I don't find documentation.
Have someone experience with this configuration ?
My question are related to permission/own of voting and ocr file.
in this configuration is CRS owner or DB owner that run srvctl commands ?
Thanks !Yes it is ... check out the RAC FAQ on metalink, and just as Chris metioned the users will need to have the oinstall group as their primary..
"Is it supported to install CRS and RAC as different users.
Yes, CRS and RAC can be installed as different users. The CRS user and the RAC user must both have "oinstall" as their primary group, and the RAC user should be a member of the OSDBA group.
Modified: 09-SEP-04 Ref #: ID-5769 " -
Load balancing in Tuxedo 9.1 and RAC
Hello to all,
I have some doubts on the way of balancing load in tuxedo 9.1 and RAC (Oracle 10gR2).
Before, without RAC our configuration was the following one:
GRP_A: service A001, service A002
GRP_B: service B001, service B002
Both groups were attacking the same BBDD, Now with the configuration in RAC we have the following thing:
We have two intances RAC: ORARAC1 and ORARAC2
TUXRACGROUPS=GRP_A1, GRP_B1; GRP_A2, GRP_B2
The groups GRP_A1 = GRP_A2 and GRP_B1 = GRP_B2, but the groups GRP_A1 and GRP_B1 use the instance ORARAC1 and GRP_A2 and GRP_B2 use the instance ORARAC. Summarizing:
GRP_A1: service A001, service A002 (ORARAC1)
GRP_B1: service B001, service B002 (ORARAC1)
GRP_A2: service A001, service A002 (ORARAC2)
GRP_B2: service B001, service B002 (ORARAC2)
Have formed the variable TUXRACGROUPS=GRP_A1, GRP_B1; GRP_A2, GRP_B2
How is Tuxedo balancing the traffic?
1) Does not balance load between RACGROUPS?
2) Does it use RAC.. as favourite?
3) Does the RACGROUPS balance when it's overlaeded or always?
3) Does the same algorithm uses that LDBAL?, if this is affirmative, is it necessary to have formed in the ubb LDABL=Y?
4) Tuxedo uses an algorithm of round-robin?
5) others
I have looked for information but I have not found any information that could help to understanding it.
Thanks in advance
P.D.: Excuse my english :(There is Oracle RAC routing information available at
http://e-docs.bea.com/tuxedo/tux91/ads/adorac.htm#248431
If you are not running in a transaction, then the TUXRACGROUPS environment
variable will not be relevant and routing will be handled as it would be if
this environment variable were not set.
Assuming that GRP_A1 and GRP_A2 are the only groups that offer services A001
and A002 and GRP_B1 and GRP_B2 are the only groups that offer services B001
and B002, routing of service requests made within a transaction will be
handled as follows:
- Any call to A001 or A002 made within a transaction with an even GTRID
counter value will be handled by GRP_A1. (The GTRID counter value is the
last of the 3 hexadecimal numbers printed in the ULOG for messages printed
within that transaction.)
- Any call to A001 or A002 made within a transaction with an odd GTRID
counter value will be handled by GRP_A2.
- Any call to B001 or B002 made within a transaction with an even GTRID
counter value will be handled by GRP_B1.
-Any call to B001 or B002 made within a transaction with an odd GTRID
counter value will be handled by GRP_B2.
Ed
<Briz Briz> wrote in message news:[email protected]...
Hello to all,
I have some doubts on the way of balancing load in tuxedo 9.1 and RAC
(Oracle 10gR2).
Before, without RAC our configuration was the following one:
GRP_A: service A001, service A002
GRP_B: service B001, service B002
Both groups were attacking the same BBDD, Now with the configuration in
RAC we have the following thing:
We have two intances RAC: ORARAC1 and ORARAC2
TUXRACGROUPS=GRP_A1, GRP_B1; GRP_A2, GRP_B2
The groups GRP_A1 = GRP_A2 and GRP_B1 = GRP_B2, but the groups GRP_A1 and
GRP_B1 use the instance ORARAC1 and GRP_A2 and GRP_B2 use the instance
ORARAC. Summarizing:
GRP_A1: service A001, service A002 (ORARAC1)
GRP_B1: service B001, service B002 (ORARAC1)
GRP_A2: service A001, service A002 (ORARAC2)
GRP_B2: service B001, service B002 (ORARAC2)
Have formed the variable TUXRACGROUPS=GRP_A1, GRP_B1; GRP_A2, GRP_B2
How is Tuxedo balancing the traffic?
1) Does not balance load between RACGROUPS?
2) Does it use RAC.. as favourite?
3) Does the RACGROUPS balance when it's overlaeded or always?
3) Does the same algorithm uses that LDBAL?, if this is affirmative, is it
necessary to have formed in the ubb LDABL=Y?
4) Tuxedo uses an algorithm of round-robin?
5) others
I have looked for information but I have not found any information that
could help to understanding it.
Thanks in advance
P.D.: Excuse my english :( -
Differences between VMware and Oracle VM
Hi guys,
I am sure that some people have used VMware and moving to OVM or vice versa.
I am curious to get some feedback resulting from comparing both products -VMware and OVM- (pros and cons).
I am preparing some documentation so I thought of getting some feedback from experts and users.
Thanks.The word is (from the Product Manager of Oracle VM) their engineering team is focusing on product release currently.
Avi, I am VERY happy to see you say storage management was a big item in OVM 3.0, as that is likely a good sign for other improvements (that would make the product more competitive with VMWare shops).
My quick "cons" between OVM 2.2.1 and VMware are:
OVM lacks the concept of centralized ISO image management (this could easily be resolved by implementing Server Pool level NFS mounts), in 2.2.x you need to upload (SCP or HTTP) an ISO to a OVM host, and "register" it.
OVM lacks the above mentioned SR selection when you create a VM (and related, a way to migrate VM's or images between SRs (Storage vMotion type feature).
OVM lacks snapshotting entirely. If you want a clone of a VM, you shut it down and suck up the downtime to clone the VM
OVM lacks a straight forward and flexible P2V mechanism, its a block level clone, doesnt inject drivers (SCSI, etc), doesnt give you the ability to resize drives, or any of the standard features in VMwares Converter product.
OVM lacks detailed VM image management, such as a simple method to resize (expand) an VM image. Right now we have to use dd at command line to expand a VM.img file, which is not user friendly.
OVM lacks the granular permission granting that you can do with VMware, for example, if a user account is a User, that user has rights to basically delete a VM if they wanted to. This is problematic as you may want to give a user rights to power cycle a VM, but not delete it!
OVM lacks easy network management (such as NIC teaming/bonding, vlan configuration etc), its a very command line intensive operation, again, very user unfriendly.
OVM lacks easy SAN connectivity management, same as the above, huge command line intensive operation, no tie-in to OVM manager at all.
Some of the Pros:
OVM is free to use, plus inexpensive support (primary reason we use it!)
OVM is the only VM product that Oracle will openly support its products on.
OVM is very scalable, management many guests on many servers in many server pools, single frame of management at no extra cost.
OVM is based on open source software (Xen), you can tinker in the OS, look at logs, install monitoring tools (zabbix, etc) that you could not do easily in VMware
Theres other issues we've ran across over the last year or so, but them all aside, I prefer it over VMware, but I am also a very seasoned Linux guy, I have my doubts that if you took a Windows sysadmin and asked them to setup a Oracle VM Cluster, it probably wouldn't fly.
I am not bias, I've built and managed equal sized environments in both VMware and OVM, so my above mentioned PROS and CONS are purely based on usage of the products. -
Oracle libraries in 10.2.0 and RAC 10.2.0
hi
are the libraries different between oracle 10.2.0 and RAC 10.2.0. we are upgarding to RAC and i am trying to findout if i have to recompile my c++ binaries using RAC 10.2.0yes we have a standalone version of 10g being converted to RAC mode..
old version
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
converted to
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
i understand the binaries would be different, but are the libraries different too? -
VMware and Siebel in Production – We have a first customer!
Hi All,
Wanted to pass this along since it may be a first. When we checked just over a year ago neither Siebel nor VMware could produce a single Siebel customer running VMware in production. We knew of a few VMware web servers in production and a few VMware Dev/Test installations but not any full VMware enterprises.
When this customer decided to go full VMware in production about a year ago as part of their Siebel 8.0 upgrade we were a little concerned since we knew they were going to be one of the very first.
I am happy to report that after two months of live production usage with 14 servers in the enterprise everything worked out very well! All 14 server are VMware and even Avaya CTI is VMware.
We know of one customer who recently decided against VMware in production since they were a little scared. I wanted to pass along the word that it worked great for our customer.
Did anyone else beat us to production with VMware? Just wondering if this is a first.
Take care,
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.comTXU has been running their production environtment since November 2004 (Siebel Call center 7.5.3.15). I did that installation my self.
Santiago Arevalo | Architect - CRM Upgrade Services
Phone: +1 9727122328 | Fax: +1 9727122328 | Mobile: +1 2145663212
Oracle Consulting
5556 Tennyson Parkway Suite 1000 | Plano, Texas 75024 Bridge 1-866-682-4770 CC / PC: 8512682
"The gap between the best software engineering practice and the average practice is very wide - perhaps wider than in any other engineering discipline." -
Hi Experts,
I'm new to Grid And RAC implementation.
Is there any good links which I can learn the basics and implementation methods of Grid.???Grid computing is a concept. Wikipedia has a fairly decent description at http://en.wikipedia.org/wiki/Grid_computing and there is even an infocenter on the concept at http://www.gridcomputing.com/
Oracle leans toward the 'Utility Computing' idea in that wiki. This is especially true in the Oracle Application Server (subject for a different forum). In that mode of Grid, you add or drop out instances of programs as demanded by the load, just like you would add or drop electrical generators on the power grid.
Taking generators off line permits maintenance, reduces wear and tear when the beasts are idle, and allows the minimum number of fully-loaded generators (and therefore minimum support personnel, support expenses) to be used as compared to lots of partially used ones - why not do that with computers as well?
In the database world, Oracle provides RAC as a coordinated cluster of database instances. The cluster may be grown or shrunk, not without some care, in a fashion similar to the power generators.
And just as with the electrical generators, people have to design the new instance, manage how and when it is added to or taken off the cluster, even figure out how to balance the load across the various units. Once designed, and put in place, it is relatively easy to add or remove an instance from the RAC, and (if done correctly) there is a minimum disruption to running applications.
Be aware that the analogy is less-than-perfect.
I recommend getting the Apress book Pro Oracle Database 10g RAC on Linux: Installation, Administration, and Performance as the basic manual for understanding and learning RAC. Read that and then use the demos and examples from Howard's site at http://www.dizwell.com and Jeff's setups at http://www.oracle.com/technology/pub/articles/tech_dba.html#linux And finally, go through the RAC material at http://www.oracle.com/technology/tech/grid/index.html -
Hi,
what is realy the advantage and difference between RAC and RAC One Node, since finaly we should switch to another server if a node/instance crashes.
On IT Tips by Burleson Consulting it is said :
What makes Oracle RAC One Node special is that it performs quick clone of the instance to a new node.
Which for me means switch to another server on the RAC.
Thanks for the explanations.- can be easily extended to multiple nodes.
- you can use "Oracle Restart" which restarts your resources automatically
- suppose you have several rac installation among your single databases you can manage a single node like you do with rac installations
Edited by: Ronny Egner on Sep 28, 2009 4:29 PM -
Which difference parallel database and RAC database
Hi Experts,
I saw some document about parallel database and RAC database.
My boss confused these two product.
which difference between parallel database and RAC database?
does parallel database is a "old RAC"?
Thanks
JimRAC is the new name with many features for old depreciated Oracle Parallel Server (OPS).
It was avialable till 8i, since 9i it is called RAC.
Regards
Edited by: skvaish1 on Mar 30, 2010 12:59 PM -
Map new Ethnic and Race categories to Old - IT 77
Hi experts,
We currently have old ethnic origins and race still displayed and assigned in IT 77. we need to map new ones and update IT 77.
I understand that the program RPURACU0 maps new ethnic and race categories to old. Once i execute this program, do i need to perform any other additional configuration steps before i run EEO and AAP reports? (I read the forum and it said something about T588M update and Screen 2010... can someone explain what to do here)
I am not an expert with EEO and AAP reports, but need to validate and execute the reports.
Please help.
Points will be awarded generously.
Thanks
AnaHi Anna,
Yes. There's no need to implement the SAP note as you system is apparently up to date already.
The Alt. Screen and Next Screen for Module Pool MP007700_CE variable key "10" should be both 2010.
After you've done this configuration, go to PA20 and check a US' employee's IT77.
You should have the additional field Ethnicity (NEW). (which should be blank) below the field Ethnic Origin.
You will also have a new way to maintain race data.
Then you should run the program RPURACU0.
The mapping should be as follows:
Old Ethnic Origin: White/Not Hispanic origin
Ethnicity: Not Hispanic/Latino
Race: White
Old Ethnic Origin: Black/Not Hispanic origin
Ethnicity: Not Hispanic/Latino
Race: Black
Old Ethnic Origin: Hispanic
Ethnicity: Hispanic/Latino
Race:
Old Ethnic Origin: Asian or Pacific Islander
Ethnicity: Not Hispanic/Latino
Race: ?
Old Ethnic Origin: Amer.Ind./Alaskan Native
Ethnicity: Not Hispanic/Latino
Race: Amer.Ind./Alaskan Native
Old Ethnic Origin: Native Hawaiian
Ethnicity: Not Hispanic/Latino
Race: Native Hawaiian/Other Pacific Islander
Old Ethnic Origin: Hispanic White Only
Ethnicity: Hispanic/Latino
Race: White
Old Ethnic Origin: Hispanic All Other
Ethnicity: Hispanic/Latino
Race:
All the old Ethnic Origins can be mapped to the new Race and Ethnic categories except for Asian or Pacific Islander.
You have to do a separate run for employees that have Asian and Pacific Islander ethnic origin.
Can you give me the program name of the AAP report you are using?
We used Ad Hoc query to report the new Ethnicity codes, so I'm not sure if it will be reflected in the standard (?) program you are using.
Regards,
Olekan -
E-recruiting - Gender and race
Hi all,
what are the SAP fields for Gender and Race in E-recruit!
Regards,
BharatHi,
the gender field is stored in the business partner data of the candidate. The candidate can either maintain it directly in its personal data or you can link it to the form of address so it is set automatically.
To get the value you use cl_hrrcf_candidate_bupa_bl. There is a method to retrieve candidate personal data. Within the person data there is the gender. I think it's field bu_***_id. Only tricky thing is that the information is differently stored in table BUT000 than it is represented in the retrieval method, but this is no serious problem.
Maintaining the race information is not part of the standard sap delivery. Attempts to get this by a dev. request will probably fail as they will point to EEO issuses similar as they do for nationality since years. SAP seem not to understand that in a global world the US approach of hiring is not the only existing and what is not allowed in one country is necessary in another one. At least we are lucky they did not design E-Recruiting according to french EEO law - we would have no name and no address.
So if you need race information on the candidate you will have to enhance the system. Best by adding a customer field for the race in the CI Include of infotype 5102 (table HRP5102).
Best Regards
Roman Weise
Maybe you are looking for
-
Interface Manager Material Transaction can not be activated
Hi hussein, One of the interface managers for INVENTORY module can not be activated. I tried to activated it using: Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions Goto Tools > Launch Manager > Submit Conc. pr
-
Balance Interest Run F.52
After running Balance interest in f.52 while posting following error I am facing. "Error when determining accounts to be posted to (posting interface) Appl Business t CoCo Int.ind. Bus. Curre Chrt Replace Status 0004 1000 1000 V1
-
Se development kit (jdk 6) problem creating class file with HelloWorldApp
I downloaded the java SE Development kit (JDK 6) with Java FX SDK and used the download manager from Java web site, the program downloaded the jdk-6u13-javafx-1_1_1-windows-i586 icon to my desktop and the java program to C\Program Files\Java\jdk1.6.0
-
Restart programmaticaly portal service in a cluster
Hello, Is it possible to restart services programaticaly in a cluster environment from one iView? Any help will be appreciate. thanks. Pino.
-
Hi all, i'm looking for a FM that gives me if a workflow is running for a type of BOR and his key of course. I can use the FM SWI_WORKITEMS_OF_OBJECT_GET but there is all status. Of course i could create my FM but if i can stay in SAP standard it's b