Vmware-config-tools.pl doesn't work after installing vmi-enabled kernel in SUSE 10 SP 2

I have recently updated my SUSE 10 SP2 to VMI enabled kernel download from Novell. Now I can't run vmware-config-tools.pl it is not finding C header files that match my running kernel. I get following error message "What is the location of the directory of C header files that match your running kernel? /usr/src/linux/include"
Following is my kernel version
Linux 2.6.16.60-0.33-vmi #1 SMP
Please let me know what i need to do to successfully run vmware configuration.

Hi,
I think you've to install the c++ compiler that matches your kernel version...
If you found this information useful, please consider awarding points for "Correct" or "Helpful". Thanks!!!

Similar Messages

  • My iPhoto doesn't work after installing lion?

    My Iphoto doesn't work after installing lion.
    it suggest that I have to instal iphoto again.
    where can I find this

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • Internal Microphone doesn't work (after installing Boot Camp 3.1)

    I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
    I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
    On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
    I note that ear plug (connector in the back of the iMac) doesn't work too.
    Somebody can help me in this case ?
    Regards
    JGFilho

    i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
    The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

  • Web Interface doesn't work after installing 11g

    A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
    Thanks in advance.

    jalvarito wrote:
    A couple days ago I decided to install Oracle 11g (after already having 10g Express Edition), after successfully installing 11g, I tried to access 10g EE using http://127.0.0.1:8080/apex/apex, and it doesn't work anymore. I tried using a java program with Netbeans that connects to my 10g Database and there's connection with no problems and I can upload/download data with no problems, I just can't access the web interface.
    Thanks in advance.And the error message is . . . ????

  • Launchpad Gestures doesn't work after install Lion

    Hey people, I have this problem, after install Lion all gestures works properly, but Launchpad and Show desktop doesn't work even with the option in the Trackpad enabled.
    Anybody can help me please.
    Kind regards.

    Here are my best suggestions for your camera problem:
    • If Apple's http://support.apple.com/kb/HT2090
       suggestions do not help you, continue with the following.
    • Use Disk Utility to repair permissions and then
       download and apply the 10.7.2 Combo Update:
         http://support.apple.com/kb/DL1459
    • Repair permissions again immediately following the system restart
       that completes the Combo update.
    The Combo version of updates can sometimes correct
    strange problems like yours.
    For camera problems in web video, you may need to update to the current version of Flash: http://www.adobe.com/software/flash/about/
    If you need to update Flash, follow Adobe's instructions and uninstall your old Flash before installing the new one: http://kb2.adobe.com/cps/908/cpsid_90893.html

  • Index (search button) in finder and mail doesn't work after installing mountain lion, index doesn't work after installing mountain lion

    after I up grade to mountain lion search button in finder and mail doesn't work: when I search from something the result is "zero"
    How can I solve this problem? thank you

    Try:
    sudo mdutil -E /
    which rebuilds spotlight and search indexes on the volume.

  • HP Officejet 7410 All-In-One Doesn't work after installing Snow Leopard

    installed Snow Leopard yesterday ....my HP 7410 printer doesn't work properly ....take a look at the response the HP Service Center gave me:
    +Hello Charles,+
    +Thank you for contacting HP Total Care.+
    +I understand from your email that you want the 'HP Officejet 7410 All-in-One Printer' software driver for 'MAC OS X 10.6'.+
    +I appreciate for the opportunity to assist you.+
    +*Charles, I regret to inform you that the unit does not support the operating system. I recommend you change the OS to Microsoft Windows to avail the unit software driver.*+
    +I will be more than happy to assist you when you change the OS.+
    +For information on keeping your HP and Compaq products up and running, please visit our Web site+
    at:
    +http://www.hp.com/go/totalcare+
    Sincerely,
    Sentinaro
    +HP Total Care+
    +Our advice is strictly limited to the question(s) asked and is based on the information provided to us. HP does not assume any responsibility or liability for the advice given and shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Always back upyour data.+
    +For more information, including technical information updates, please visit our Web site at http://www.hp.com/support.+
    +HP does not require you to send any financial data in your reply to this email. As a prudent reminder, do not insert credit card details or other financial information in any e-mail replies.+

    Help! I've spent hours researching this and can't find a solution...
    I upgraded 3 Intel Macs in the house to Snow Leopard last weekend. All went differently...but all were successful. I found that the connection to my HP Officejet 7410 (connected wirelessly to 802.11g Airport Express (AEX) network) was "broken". Deleted then "re-intalled". Documents could now be printed. I then found out scan function was "broken". Figured out how to scan with new Snow Leopard "baked-in" driver and Scan tab...different, but it worked.
    Then, tonight, on the eve of my birthday, I was given the green light to purchase an Airport Extreme 802.11n (dual-band) base station (AEBS). I set it up and got 2.5X speed on the two 802.11n laptops in the household. Glorious! Then I went to work to ensure print and scan functions were still operational. Tried to re-connect HP OJ 7410 to wireless network...when it found the network it asked for the "WEP" key (on previous AEX network I was secured utilizing WPA2/Personal)...I entered the WPA2/Personal password (same as previous network) and got the error message "Key must be 5 or 13 characters OR 10 or 26 length with 0-9 and A-F (hex)". So I turned off the wireless radio and instead plugged the 7410 into the AEBS via USB. Deleted the previous queue and re-installed. Found the printer no problem but now without the Scan tab or function anywhere...despite following all the recommendations found both on the HP site and here in the Apple Forums. I print fine. Can't for the life of me figure out what the problem with the now lost again Scan function is.
    Only strangeness I can think of is the following: When setting up the network(s), I had the option of naming the 5 ghz band something different. I set mine up with the same name of the 2.4 ghz network with 5ghz in parenthesis (i.e. BobbyG and BobbyG (5 Ghz)).
    Sorry for the long post but we need the scan function in the house for my wife's teaching purposes. Any assistance would be GREATLY appreciated.
    Very Respectfully,
    Bobby G.

  • External Combo Drive doesn't work after installing Snow Leopard

    This Mini was bought used with a defective combo drive. I purchased a "No-Brand" external Combo Drive (USB connected and powered) off eBay. Everything worked fine under Leopard. I used the external drive to install Snow leopard but could not eject the DVD at the completion of the installation process. I manually ejected the DVD and discovered the external drive now doesn't work with either DVD's or CD"s.
    Any ideas what the problem is?
    Ken

    Mark this up to "cockpit' trouble on my part. The external combo drive now works.

  • Camera app doesn't work after installing a new screen

    I have been fixing broken iPhone screens for quite some time now but have never come across something like this. After installing a new screen the camera app won't show the camera and the shutter never opens. I thought I didn't put one of the cables in right so I double checked and sure enough they were in good. I restored the phone and tried it again with no luck. I then switched out to another screen I found and the camera worked perfectly. This is so bizzarre to me but can anyone explain to me what is wrong? Or what has happened? I have never seen anything like this.

    I keep getting an error message of (0xE80000001)!
    Read here.   iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Why Mac Help doesn't work after installing Leopard?

    After installing Leopard Mac Help shows a untitled window and after few seconds it disappear.

    Actually no. I'm working on the same environment before installing Leopard. No firewall...but I'm working from China where a massive Great Firewall is controlled by the government. That case I shouldn't be the only one.
    Fernando

  • My microphone doesn't work after installing lion on iMac early 2009

    Hello,
    I've just installed LION and everthing seems to be OK except the microphone, it doesn't work on skype, imovie.
    I have an Imac early 2009.
    Will this bug be fixed in the next 10.7.1?
    Please if you can help me,
    Thanks

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

  • My itunes doesn't work after installing lion 10.7. I even downloaded the updated version of itunes, does anyone know what to do?

    itunes doesn't work anymore

    My itunes was working fine until we try to connect a new ipod touch. It said I needed to update the itunes to 10.5 or higher. To do that I had to update my OS X  Lion also.. now it doesn work... grrrr. Please if you have the solution post. I am placing a call to apple support to see if they can help me. Also I was looking for alternative software in case I can't make it work. Do you have any recommendations? Thank you and I am sorry I cant be helpful yet.

  • Re: Portege R500: Contros button doesn't work after installing update

    After installing the most recent version of Toshiba's Value Added Package, the two buttons (toshiba assist and backlight on/off) do not work properly: they open instead a firefox browser window.
    I assume there is something to configure in the "optimisation" section of Toshiba Assist.
    When I open the program "Toshiba buttons functions" (sorry for the puny translation, in Spanish it's called: "Funciones de botones de Toshiba") all the entries are blank and I have to indicate the Url of the program supposed turning off my LCD's backlight...
    I have no clue where to find this executable.
    Can anybody help me?

    Thanks for the response.
    I hope I don't have to use such an extreme solution. Mainly because I *really* don't have time for restoring an OS. Furthermore, if I have to restore everything every time I update the computer: what is the point of updating?
    There must be a more subtle solution... don't you think?

  • IPhone doesn't work after installing upgrade

    Upgraded iPhone and now it doesn't work. I have a black screen with the apple logo and white line - that's all. It doesn't respond to even the power button.

    Try resetting the App Store and Clearing Cookies.
    Reset       Learned from Old Toad
    App Store support. There is troubleshooting and a contact link.
    Support
    Time Machine
    Inherit a Backup
    Inherit a Backup (2)

  • Magnetic lasso tool doesn't work after installing Adobe extension manager update

    Hi , I've just installed Extension Manager Update 6.0.5.9 yesterday and today I've get a wired problem  with my bambo tablet.I've used this tablet for 3-4  years without problem. The problem I've now is when I drag lasso tool on an image to make selection it doesn't make a selection even it is showed in the history state that I've used lasso,or magnetic lasso. My machine is a Mac Pro 2010,Quad-Core Intel Xeon running on Lion 10.7.5 and my bamboo driver is the latest version 5.3.2-2. Even now I've change to use freeform path I've still cannot change form path to selection.

    Hi! Does other select tools work? The might be hidden selections Ctrl+H

Maybe you are looking for

  • Purchase Order 506739

    Hello, I have 20 items on a Purchase Order of which 19 items have arrived.One is remaining when trying to Goods Receipt the last item as it has arrived now I get a Error Message saying The Purchase Order No 506739 is under process by RF/SBO User.Many

  • Can't configure EPM modules after ODI 11.1.1.6 install

    So recently ran the EPM 11.1.2.1 install on my windows server r2 x86. I have configured foundation. Then i proceeded to install ODI 11.1.1.6. ODI installed successfully and runs. Although now I can't configure essbase with shared services. Anyone kno

  • How to install KDE 3.5.9 using pacman?

    Where do I find KDE 3.5.9 (or KDE 3.5.10) package and his locales to install in Arch using pacman?

  • Move collapsed group in tree control expands it

    In LV 2010, I have a tree control.  If I collapse a group and move it to a new location in the tree, it is expanded when I drop it in its new location.  Is this a configurable option?  A bug?

  • 12.c and Attribute Value

    Hi, I am using the latest version of JDeveloper 12c. In previous releases, when you have a list of values in one of your view attributes, inf you use the expression #{bindings.yourLOV.inputValue} you would receive the id rather the String representin