Vmware esx 4.1 (not cisco custom iso) supported on ucs C 24 M3

Hi,
In a test plant I need to install esxi 4.1, not in production network, as it can be done without buying the vmware licenze (custom cisco iso)?
Someone did install esxi 4.1 (not cisco custom iso) with success on ucs c serie 24 M3 ?

no, because the environment is a test plant and the customer not want to buy the licenses for vmware, and I saw on the website that the version 4.1 (not custom cisco iso) is free
I can install the free version 4.1 on ucs ?

Similar Messages

Cisco Custom ISO - VMWare ESXi 5.5 Upd 2 - VMware Update Manager still showing Update 2 Required

Hello All,
I just updated one of my hosts with the latest cisco image provided on vmware's site (Vmware-ESXi-5.5.0-2068190-custom-Cisco-5.5.2.3). After applying it as a host upgrade and then doing a scan against the host in update manager, it shows that ESXi Complete Update 2 is missing???
I know this may be more of a vmware issue, but wanted to see if anyone had run into this?

I ended up getting a vmware ticket opened. Turns out that the patch description was no that great and it was bug fixes for 5.5 Upd 2. We verified 110% that it was correctly updated. Update manager could not be so vague sometimes.
Thanks for the reply.

VMware 5.0 host not seeing EMC VNX5300 through UCS

I cannot seem to get VMware ESX 5.0 host to see EMC VNX5300 through UCS FC setup. It does see the EMC storage through iSCSI.
This is our setup
2 - WS-C3750X-24T-E
2 - UCS 6248 UP
2 - Cisco UCS Chassis
2 - EMC VNX5300 FC - Connects directly to Fabric Interconnect and configured as FC Storage Port
2 - EMC VNX5300 iSCSI - Connects directly to Fabric Interconnect and configured as NAS Port
When I do 'show flogi database' on the Fabric Interconnect, I see
INTERACE
VSAN
FCID
PORT NAME
NODE NAME
fc1/31
2231
0x970001
50:06:01:62:46:e0:13:42
50:06:01:60:c6:e0:13:42
fc1/32
2231
0x970101
50:06:01:6b:46:e0:13:42
50:06:01:60:c6:e0:13:42
vfc689
2231
0xea0002
20:00:00:25:b5:00:00:5f
20:00:00:25:b5:00:00:4f
vfc1133
2231
0xea0000
20:00:00:25:b5:00:00:2f
20:00:00:25:b5:00:00:7f
According to this, I seems to see the initators on the EMC. Why is it not seeing the EMC storage group?
Is there a documentation on how to hooking this up correctly?
Jimmy

Hi Jimmy,
If you are using UCS version 2.1, it could be that you missed to do the zoning in UCS for the FC direct attached storage. Please enable zoning in the required VSAN and follow steps in
http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/2.1/b_UCSM_GUI_Configuration_Guide_2_1_chapter_011011.html to configure the zoning.
If your UCS version is prior to 2.1, you need to have a upstream SAN switch which is connected to FI and pushing the zone database to the FI.
Hope this helps.
-Ganesh

Best Practices - VMware ESX 4.0 in a Cisco Environment?

Hello,
I'm presently designing a VMware ESX 4.0 deployment and integrating it with our Cisco environment. I've found the following document:
http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/vmware/VMware.html "VMware Infrastructure 3 in a Cisco Network Environment" and I was just wondering if there was a newer document applicable to ESX 4.x or if these best practices still applied?
I'm particularly interested in proper vlan design for the various port-groups with in ESX and etherchannel configuration between ESX hosts and Cisco switches.
Thanks,
Rob

Well, in that this is a Storage group, I'll answer froma storage noetworking point of view.
ESX hosts are no different to any other host, Just stick with the standard best practice of single initiator zoning and you'll be fine.
As a slight aside, from an array point of view, I've tended to configure all the pWWN's of the whole cluster into one "host" definition, as this makes LUN mapping easier.
Steven

Nexus 1000v, VMWare ESX and Microsoft SC VMM

Hi,
Im curious if anybody has worked up any solutions managing network infrastructure for VMWare ESX hosts/vms with the Nexus 1000v and Microsoft's System Center Virtual Machine Manager.
There currently exists support for the 1000v and ESX and SCVMM using the Cisco 1000v software for MS Hyper-V and SCVMM. There is no suck support for VMWare ESX.
Im curious as to what others with VMWare, Nexus 1000v or equivalent and SCVMM have done to work around this issue.
Trying to get some ideas.
Thanks

Aaron,
The steps you have above are correct, you will need steps 1 - 4 to get it working correctly. Normally people will create a separate VLAN for their NLB interfaces/subnet, to prevent uncessisary flooding of mcast frames within the network.
To answer your questions
1) I've seen multiple customer run this configuration
2) The steps you have are correct
3) You can't enable/disable IGMP snooping on UCS. It's enabled by default and not a configurable option. There's no need to change anything within UCS in regards to MS NLB with the procedure above. FYI - the ability to disable/enable IGMP snooping on UCS is slated for an upcoming release 2.1.
This is the correct method untill the time we have the option of configuring static multicast mac entries on
the Nexus 1000v. If this is a feature you'd like, please open a TAC case and request for bug CSCtb93725 to be linked to your SR.
This will give more "push" to our develpment team to prioritize this request.
Hopefully some other customers can share their experience.
Regards,
Robert

Cisco Customized ESXi 5.5 Update 2 Image

When can we expect to see the new ESXi 5.5 Update 2 custom image? I just checked VMWare's site and I see Update 1 but not Update 2. Is there a supported/recommended method for updating UCS servers to ESXi 5.5 Update 2 in the mean time?
Thanks

1) use this utility to figure out which enic / fnic is required. eg.for ESXi 5.5 U2
Adapter Driver = 1.6.0.12 (FNIC) / 2.1.2.59 (ENIC)
Adapter Firmware = 2.2(3)
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
2) Install ESXi 5.5 U2, regular iso (Non OEM version) from VMware website
3) get the above fnic / enic driver from ISO image of UCS-related drivers
ucs-bxxx-drivers.2.1.3d.iso
4) update the fnic/enic driver either manually with CLI or VUM.

Patch Cisco Custom Image

Hi,
I've installed a Cisco Custom ESXi 5.5 Image in a UCS C220 M3 and i would like to know if i can install the patches using Update Manager as i do with a default image. I'm not sure if i'll have any problems because some patches update the ESXi drivers and could for example overwrite the Cisco enic and fnic.
I know HP and Dell have their repositories that i can use with Update Manager, but cannot find anything like that for cisco.
Thanks

Hi Netadmin,
The support of the OS for UCS blades, or rack mount servers will depend on the model of your server and the firmware that it is running.
If you are looking for the Cisco 5.1 U3 download iso you can find it below. Also include the compatibility matrix, you can verify if you server does support this version based on the firmware installed.
Download Cisco Custom Image for ESXi 5.1.0 U3 GA Install CD
https://my.vmware.com/web/vmware/details?downloadGroup=CISCO-ESXI-5.1.0U3&productId=285
UCS HW and SW Interoperability
http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.html
Let me know if this helps or if you have any other questions.

Vmware esx 4 to hyper-v 2012 e2

Hi,
We need to do a convert from Vmware esx 4.0 which is managed by vsphere 4.1 to hyper 2012 R2 Cluster
I did look at SCVMM but 2012 does not support hyper-v 2012 R2 I believe
SCVMM 2012 sp1 Does not support vmware esx 4.0 (http://technet.microsoft.com/en-gb/library/gg697603.aspx)
What are the options available here as we just need to do a virtual to virtual migration but google did not help.

Hi,
The MVMC Supports conversion of virtual machines from VMware vSphere 5.5, VMware vSphere 5.1, and VMware vSphere 4.1 hosts Hyper-V virtual machines.
You can get the detail information at the download website(you can expand the Details).
Microsoft Virtual Machine Converter 2.0
http://www.microsoft.com/en-us/download/details.aspx?id=42497
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Prime LMS 4.1 and VMWARE ESX 5.0

Can Cisco Prime LMS 4.1 be deployed on VMware ESX server 5.0 or not ?

No LMS 4.1 is not supported on ESXi 5.0. LMS 4.1 supports the following Virtualization Systems:
•VMware ESX server 3.0.x
•VMware ESX Server 3.5.x
•VMWare ESX Server 4.0.x
•VMWare ESX Server 4.1
•VMWare ESXi Server 4.0
•VMware ESXi Server 4.1
•Hyper V Virtualization (As an installable in Windows 2008)
For more details check:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.1/install/guide/prereq.html#wp1119955
On a side note, though a OVF/OVA file may be an issue, but you can try to install LMS 4.1 on a virtualized Win/Sol guest OS host, where it should work mostly. But for any issues further, Cisco or TAC may refer to this as an unsupported installation, for any t/s or support.
Else, you may upgrade to LMS 4.2 which is supported on ESXi 5.0.
-Thanks

Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping

Excuse me, does any body can help me?
Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping
I need to know if the ACS support the AAA functions but from equal ip segments (ip overlaping) on diferent places.... with diferent client networks.
We are implementing the ACS on a central site (our NOC), so each field engineer will be AAA from diferent sites, same ip networks and diferent places....
We need to implement support activities where our field engineer get access on a cisco device on the client premises, but the point is that we have a field engineer force wich get access on each device on diferent places.
With this scenary we need to decide wich is better: The appliance or the ACS Server with VMware ESX
ACS Server with VMware ESX
CSACS-5.1-VM-K9
CSACS-5-ADV-LIC
CSACS-5-LRG-LIC
CSACS-5-BASE-LIC
CON-CSSPS-5ADVLI
CON-CSSPS-5LRGLC
CON-CSSPS-51VMK
APPLIANCE
CSACS-1120-K9
CAB-AC
CSACS-5-BASE-LIC
CSACS-5.0-SW-K9
CON-OSP-CS1120K9

Just a quick question - have you looked at superwaba
and wabajump? Superwaba is basically Java for pocket
pc and palm, but wabajump allows you to compile to
palm (not pocket pc). You can also use Eclipse for
development in an applet - much quicker than deploying
to device/virtual device. Small memory footprint as
well.
Cheers
Andy StrattonThank you Andy. I'll try it. Have you tried to use Websphere Studio Device Developer ?
I've tried version 5.5 but i found it not too comfortable.
I'd like to know personal experiences of the whole stack of components and tools involved
in the development process. We're trying to design the best environment for it.
Kind Regards
J.L Perez

SAP and VMWare ESX

Hello, I read an articule of VMWare that said that VMWare ESX support SAP. But in the other hand I had read some posts that said that it is not recommended to use VMWare with SAP because they(SAP)won't give us support.
Here, we want to use VMWare ESX with SAP Portal Server and SAP MM. But only for Test and Development.
For Producction they'll have their own server.
Does anyone knows if I could implement this.
and If Any of you implement a similar solution?
Thanks
Johan

Hi,
Normally every customer has acces to it with their S number. If you don't have an S number, this the procedure taken from the help on service.sap.com.
The following data is needed to request a new user ID.
Note:
Please write down all your data, as you have to enter it several times and your entries always have to agree.
If you want to delete all your entries to date, click Reset.
Customer/partner number or installation number:
You will find the installation number of your SAP System under:
System -> Status... -> SAP System Data. Hint:
You only have to enter one of the numbers.
Form of address, first name, last name
When you log on to the SAP Service Marketplace, you can change this data in MyProfile.
E-mail address
You need an e-mail address that is registered at your company.
The system checks whether your e-mail address has been assigned to the entered customer/partner number.
Once you have that data:
Step 1 - Registering with the SAP Service Marketplace
Enter your customer/partner number or installation number.
Choose a form of address and enter your first and last name.
Enter the e-mail address registered with your company.
Once your entries are complete, click Send.
The User Request Successful screen appears:
You receive a registration password:
Write it down. You will need the registration password for the next step.
Within one day, you receive an e-mail with the URL link for your access data.
... Read Step 2
Hint:
If the User request failed or incomplete screen appears, your entries were incorrect.
... Read User request failed or incomplete
Top of Page
Step 2 - Request Access Data
Enter the URL link from the e-mail in your browser's address field and press Return.
The Here is your user ID and password screen appears.
Enter the following data, and make sure that it agrees with the data you entered in Step 1 - Registering with the SAP Service Marketplace:
Customer/partner number or installation number
First name and last name
E-mail address
Enter the required registration password.
When you entries are complete, click Send.
The User data registration was successful screen appears:
You receive your user ID and password.
... Read Step 3
Hint:
If the User ID generation failed screen appears, your entries were incorrect.
... Read User ID generation failed
Top of Page
Step 3 - Log On to the SAP Service Marketplace
Write down your user ID and password.
Hint:
You can change the password in MyProfile as soon as you log on to the SAP Service Marketplace.
To reach the home page of the SAP Service Marketplace, enter the following URL in your browser: http://service.sap.com.
Click Logon to SAP Service Marketplace and enter your user ID and your password.
Click OK.
You are now logged on to the SAP Service Marketplace.
Eddy

VMware ESX and dual homing

We are beginning to deploy VMware ESX servers for Windows production environments. How do I set up the VNICs to dual home the VM's to separate Catalyst 6500's.
Thanks, Lisa

Hi Steve,
Specific to VSS by itself, that is available and shipping today, but support for the FWSM with VSS is not yet available (as you have already noted :-). I am currently hearing Q3CY08 as a possible timeframe for supporting VSS and the FWSM, but that is not written in stone. In the mean time, you could still take advantage of VSS to do the multi-chassis EtherChannel, just not with the FWSM included.
Specific to the question on the quad mezz cards, I personally do not have any experience with this specific card, but do know that teaming/bonding software is getting better every day, but we all know that not everything works as advertised, so in that case (and actually, in every case if you think about it), any such design should be fully tested before going into production, to make sure it works as expected/desired.
In your post you mention the 3020 (HP Cisco blade switch). That does indeed throw a bit of a wrench in the works, since as you noted, the NICs will each go to separate physical switches in the enclosure, thus making EtherChannel type solutions on the server impossible. In that case, I normally recommend a simple Active/Standby form of teaming/bonding, as it is robust and deterministic (proprietary forms of Active/Active, in my experience, are neither). If you did decide to go with pass-thru (instead of 3020) to a VSS environment, you could then take advantage of the EtherChannel type teaming, but then you introduce the headache of all of those cables from the pass-thru's, which defeats one of the more common purposes many people go to blades, reduced cabling.
Another solution that would give you the best of both worlds in a blade enclosure (reduced cabling and EtherChannel teaming on the servers), is to look at the new 3120's just coming out. With their stacking ability, multiple switches look and act as a single logical switch (exactly like the 3750E), so when these are deployed in the enclosure and stacked, you can indeed use EtherChannel on the server NICs while still getting cable reduction for the enclosure.
HTH, Matt

How to tell what was the latest patch installed on VMware ESX Server 3i, 3.5.0, 207095

Hello Guys,
I have been running an old server that was installed as a test system on a DELL workstation - Optiplex GX620 (32 bit).
During the installation I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:
"return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE" to read:
"return interface.GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI" this made it worked and I have been using it for 3 years now. However, at this time I was hoping to update it with the latest patches and updates and I cannot figure out if I have ESXi or just ESX, nor what was my last update and what is required next.
I have used this command to get the following output:
# vmware -v
VMware ESX Server 3i 3.5.0 build-207095
... I believe the 3i indicates that I have an ESXi 3.5.0 but is build-207095 the same buid as ESXi 3.5.0 Update 5?
If not, how do I go about updating it? What is the KB # I should download?
I can manage it using vSphere Client 5.5 and I can SSH into it using Putty.
Note: When I run... "# esxupdate --bundle=ESXe350-201302401-I-SG.zip update" from within the folder where its at in the datastore, nothing happens... just a new line is scrolled.
Also...
# esxupdate query
<?xml version="1.0"?>
<query-response>
<installed-packages>
    <package ID="ESX-207095">
      <name>firmware</name>
      <version>3.5.0</version>
      <rel>207095</rel>
    </package>
    <package ID="ESX-CLIENT-204907">
      <name>viclient</name>
      <version>2.5.0</version>
      <rel>204907</rel>
    </package>
    <package ID="ESX-TOOLS-207095">
      <name>tools</name>
      <version>3.5.0</version>
      <rel>207095</rel>
    </package>
</installed-packages>
</query-response>
/vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/Patches/ESXe350-201302401-O-SG #
... is there any further update for this system? I believe so as the Heartbleed patch etc. was not around when I was installing this server back in 2010.

Hello Richardson Porto,
I wanted to tell you that I appreciate the help so far.
Also wanted to point out to you, that the KB indicated above is older than Update 5, which from your instructions is what I have installed. That KB is for U2.
Now, the document definitely has step by step instructions on installing, querying etc. But my problem is ... NOT ALL COMMANDS WORK FOR ME!
This is why I am here because all the instructions I have been reading does not work with my flavor of ESX 3.5.0, 207095... WHY? It has me stumped.
For example, here are some commands the doc asked me to do and they failed: (Note that I had to unzip the folder on my windows box and upload it to /tmp using vSphere Client)
/tmp # ls
ESX350-201302402-BG      ESX350-201302402-BG.zip vmhsdaemon-0
/tmp # unzip ESX350-201302402-BG.zip
-ash: unzip: not found                                                                                          -----------------------THIS COMMAND WAS NOT FOUND ?
/tmp # cd ESX350-201302402-BG
/tmp/ESX350-201302402-BG # esxupdate info
Invalid command info                                                                                          -----------------------THIS COMMAND WAS INVALID ?
/tmp/ESX350-201302402-BG # esxupdate update                                       -----------------------NOTHING HAPPENED HERE ?
/tmp/ESX350-201302402-BG # ls -lh
-rw-------    1 root     root       321.3k Dec 13 15:24 VMware-esx-scripts-3.5.0-988599.i386.rpm
-rw-------    1 root     root         1.6k Dec 13 15:24 contents.xml
-rw-------    1 root     root          701 Dec 13 15:24 contents.xml.sig
-rw-------    1 root     root         1.4k Dec 13 15:24 descriptor.xml
drwxr-xr-x    1 root     root          512 Dec 13 15:24 headers
/tmp/ESX350-201302402-BG #
NOTE: All these commands were run sequentially and I just copied and paste it from my SSH Client (PuTTy.exe)
Is there a toolkit I need to install to have these commands or what really am I missing here? Host is in Maintenance Mode and the 1 VM that's on it is off!
I am going to start a new discussion with this NEW ISSUE, since the Heading of this DISCUSSION has already been SOLVED! Thanks again!

Solaris Cluster 3.3 on VMware ESX 4.1

Hi there,
I am trying to setup Solaris Cluster 3.3 on Vmware ESX 4.1
My first question is: Is there anyone out there setted up Solaris Cluster on vmware accross boxes?
My tools:
Solaris 10 U9 x64
Solaris Cluster 3.3
Vmware ESX 4.1
HP DL 380 G7
HP P2000 Fibre Channel Storage
When I try to setup cluster, just next next next, it completes successfully. It reboots the second node first and then the itself.
After second node comes up on login screen, ping stops after 5 sec. Same either nodes!
I am trying to understand why it does that? I did every possibility to complete this job. Setted up quorum as RDM from VMware. Solaris has direct access to quorum disk now.
I am new to Solaris and I am having the errors below. If someone would like to help me it will be much appreciated!
Please explain me in more details i am new bee in solaris :) Thanks!
I need help especially on error: /proc fails to mount periodically during reboots.
Here is the error messages. Is there any one out there setted up Solaris Cluster on ESX 4.1 ?
* cluster check (ver 1.0)
Report Date: 2011.02.28 at 16.04.46 EET
2011.02.28 at 14.04.46 GMT
Command run on host:
39bc6e2d- sun1
Checks run on nodes:
sun1
Unique Checks: 5
===========================================================================
* Summary of Single Node Check Results for sun1
===========================================================================
Checks Considered: 5
Results by Status
Violated : 0
Insufficient Data : 0
Execution Error : 0
Unknown Status : 0
Information Only : 0
Not Applicable : 2
Passed : 3
Violations by Severity
Critical : 0
High : 0
Moderate : 0
Low : 0
* Details for 2 Not Applicable Checks on sun1
* Check ID: S6708606 ***
* Severity: Moderate
* Problem Statement: Multiple network interfaces on a single subnet have the same MAC address.
* Applicability: Scan output of '/usr/sbin/ifconfig -a' for more than one interface with an 'ether' line. Check does not apply if zero or only one ether line.
* Check ID: S6708496 ***
* Severity: Moderate
* Problem Statement: Cluster node (3.1 or later) OpenBoot Prom (OBP) has local-mac-address? variable set to 'false'.
* Applicability: Applicable to SPARC architecture only.
* Details for 3 Passed Checks on sun1
* Check ID: S6708605 ***
* Severity: Critical
* Problem Statement: The /dev/rmt directory is missing.
* Check ID: S6708638 ***
* Severity: Moderate
* Problem Statement: Node has insufficient physical memory.
* Check ID: S6708642 ***
* Severity: Critical
* Problem Statement: /proc fails to mount periodically during reboots.
===========================================================================
* End of Report 2011.02.28 at 16.04.46 EET
===========================================================================
Edited by: user13603929 on 28-Feb-2011 22:22
Edited by: user13603929 on 28-Feb-2011 22:24
Note: Please ignore memory error I have installed 5GB memory and it says it requires min 1 GB! i think it is a bug!
Edited by: user13603929 on 28-Feb-2011 22:25

@TimRead
Hi, thanks for reply,
I have already followed the steps also on your links but no joy on this.
What i noticed here is cluster seems to be buggy. Because i have tried to install cluster 3.3 on physical hardware and it gave me excat same error messages! interesting isnt it?
Please see errors below that I got from on top of VMware and also on Solaris Physical hardware installation:
ERROR1:
Comment: I have installed different memories all the time. It keeps sayying that silly error.
problem_statement : *Node has insufficient physical memory.
<analysis>5120 MB of memory is installed on this node.The current release of Solaris Cluster requires a minimum of 1024 MB of physical memory in each node. Additional memory required for various Data Services.</analysis>
<recommendations>Add enough memory to this node to bring its physical memory up to the minimum required level.
ERROR2
Comment: Despite rmt directory is there I gor error below on cluster check
<problem_statement>The /dev/rmt directory is missing.
<analysis>The /dev/rmt directory is missing on this Solaris Cluster node. The current implementation of scdidadm(1M) relies on the existence of /dev/rmt to successfully execute 'scdidadm -r'. The /dev/rmt directory is created by Solaris regardless of the existence of the actual nderlying devices. The expectation is that the user will never delete this directory. During a reconfiguration reboot to add new disk devices, if /dev/rmt is missing scdidadm will not create the new devices and will exit with the following error: 'ERR in discover_paths : Cannot walk /dev/rmt' The absence of /dev/rmt might prevent a failover to this node and result in a cluster outage. See BugIDs 4368956 and 4783135 for more details.</analysis>
ERROR3
Comment: All Nics have different MAC address though, also I have done what it suggests me. No joy here as well!
<problem_statement>Cluster node (3.1 or later) OpenBoot Prom (OBP) has local-mac-address? variable set to 'false'.
<analysis>The local-mac-address? variable must be set to 'true.' Proper operation of the public networks depends on each interface having a different MAC address.</analysis>
<recommendations>Change the local-mac-address? variable to true: 1) From the OBP (ok> prompt): ok> setenv local-mac-address? true ok> reset 2) Or as root: # /usr/sbin/eeprom local-mac-address?=true # init 0 ok> reset</recommendations>
ERROR4
Comment: No comment on this, i have done what it says no joy...
<problem_statement>/proc fails to mount periodically during reboots.
<analysis>Something is trying to access /proc before it is normally mounted during the boot process. This can cause /proc not to mount. If /proc isn't mounted, some Solaris Cluster daemons might fail on startup, which can cause the node to panic. The following lines were found:</analysis>
Thanks!

Will Crystal Reports XI run on VMware ESX 3.5 in a virtual machine

I am running VMware ESX 3.5 Update 2 Host with a Windows 2003 R2 Standard on a Virtual Machine. I initially P to V the original server that was running Crystal Reports XI to ESX but it then would not open Crystal Reports, you would click on the excutable and nothing would happen. I tried uninstalling and reinstalling and nothing changes. I then deployed a new VM from Template and reloaded Crystal Reports and the same thing happens! Does anyone have any ideas?
Thanks,
PA

Hi Paul
Please visit the below link:
[http://www.eweek.com/c/a/IT-Infrastructure/VMware-ESX-Update-Causing-Disruptions/]
Hope this helps!!!
Regards
Sourashree

Vmware esx 4.1 (not cisco custom iso) supported on ucs C 24 M3

Similar Messages

Maybe you are looking for