VMWare ESXi and rebooting the system
After installing VMWare ESXi and rebooting the system, the user experiences the following POST error:
"Error 1962 No operating system found will reboot in 1 sec?"
I have done the suggested solutuion as follows. but I have same problem after that too.
http://support.lenovo.com/en_IN/detail.page?DocID=HT078920
Someone can help me..... appreciate.....
Fidelis,
Thanks, so far. Mayby I should have been more direct !
I this thread you wrote My solaris Disk is the secondary Slave.
I the next thread you stated that you installed solaris on the secondary master.
Have you made a mistake while writing 1 or 2
or
Have you changed your disk-configuration, and if so why ?
Regards,
Eric.
PS How did you get that boot-manager going ?
Similar Messages
-
i have a blinking Amber on my extreme now and it cannot extend the network. It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions
What OS are you running?
Please give me a screenshot of the current AE setup..
I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
You will need to factory reset again to get going.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite or whatever you are using.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 for basestation.
Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised. -
I have fixed the cookies problem. I uninstalled Firefox and rebooted the system
This was the first time that I rebooted the system before I reinstalled Firefox. Everything works fine now.
Hello again,
Whenever i click on something (for example to windows media player, explorer new window etc.), the fan speeds up for 1 seconds and gets low again.
In this review, it's is clearly told that the fan gets up and down very often.
''The fan on this laptop, while having the ability to spin slowly, likes to quickly ramp up at the slightest temperature increase. It also has no delay, causing the fan to quickly speed up, slow down, speed up, slow down, etc. This started to drive me up the wall when some programs were running. I am hoping a BIOS fix comes around to mellow out the fan''
That is exactly what I am complain about.
The whole review can be found here:
http://www.notebookreview.com/default.asp?newsID=3749&review=Lenovo+N200 -
I was having a compatability issue with another entities website and platform. I was asked to upload my informaiton with Mozilla Firefox. I used this digital platform before employing Internet Explorer to complete my master's program. I am able to install the program, the link picture is on my mainpage, but I am not able to launch it.
Firefox is already running but is not responding
https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding?s=firefox+is+already+running&as=s
Check and tell if its working. -
My ipod touch died as I was rebooting the system. It won't charge?!?!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
It includes how to place in recovery mode -
I disabled my Macbook Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?
How do you disabled it if running the same?
-
Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks
Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP -
Error when running Tomcat after reboot the system
when i first install the tomcat without reboot the system (win2k), it start the tomcat without any error message and i also able to view jsp page. but when i reboot the system and try to start tomcat i receive this kind of error message
Catalina.start: LifecycleException: null.open: java.net.BindException: Address
in use: JVM_Bind
LifecycleException: null.open: java.net.BindException: Address in use: JVM_Bin
d
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
ctor.java:1116)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:552)
at org.apache.catalina.startup.Catalina.start(Catalina.java:775)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
----- Root Cause -----
java.net.BindException: Address in use: JVM_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at java.net.ServerSocket.<init>(Unknown Source)
at org.apache.catalina.net.DefaultServerSocketFactory.createSocket(Defau
ltServerSocketFactory.java:118)
at org.apache.catalina.connector.http.HttpConnector.open(HttpConnector.j
ava:946)
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
ctor.java:1114)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:552)
at org.apache.catalina.startup.Catalina.start(Catalina.java:775)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at java.lang.reflect.Method.invoke(Native Method)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
i already set the JAVA_HOME and CATALINA_HOME as following:
JAVA_HOME
e:\jdk1.3.1_02\bin
CATALINA_HOME
e:\Apache Tomcat 4.0
is anyone can help me to solve this problem? thanks!Although i'm not too familiar with Tomcat, i'm pretty sure this is because something else is already using that port. Try changing the port to something different maybe?
Also, there's a possibility that Tomcat is already started as a service in win2k. Check your services for something like Apache Tomcat to see if it's starting the service automatically.
These are really just educated guesses, but worth a try maybe. -
The free apps and the ones I try to purchase will not download. I have updated all my app and the ios 5 have the most recent updates. I have turned off the system and reset the system and it will still not download the apps. When I purchase an app it ask for password. I put the password in and it say waiting and then the app dissapears. At this point I don't know what to do?
1. Sign out of old ID
2. Reboot
3. Sign in with new ID -
I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......
In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy -
Went to upgrade to FF4 upgraded, and it told me to re boot the system to complete installation. Clicked to confirm reboot and screen closed down. PC chose that moment to have a power failure and when I switched it on again, I'd lost firefox and now every time I try to load firefox, the box comes up telling me to reboot the system to complete installation. When I reboot, nothing happens, it's like it's locked in a loop. curently cannot access any version of Firefox.
I need to preserve my bookmarks and remembered passwords, otherwise I'd uninstall and reinstall from scratch. what can I do?Try rebooting the computer, do NOT open Firefox and then try the clean reinstall.
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore
You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password -
What is the best way to reboot the system using system function in an application?
Dear Developers,
Greetings!!!!
As, i would like to reboot my WinCE 7 based system with an application. I am using one system defined function SetSystemPowerState.
Below is the sample code -
DWORD result;
result = SetSystemPowerState(NULL, POWER_STATE_BOOT,0);
if(result){
DEBUGMSG(TRUE,(TEXT("The system is going to boot\r\n")));
else{
DEBUGMSG(TRUE,(TEXT("ERROR: While trying to reboot the system :%d\r\n"),GetLastError()));
But, when I run my application I got the following debug messages -
100418 PID:4740016 TID:319004e CePerf.dll is absent - performance data will not be recorded
100422 PID:2cc0652 TID:234063a OSAXST1: >>> Loading Module 'coredll.dll' (0x9E411740) at address 0x40010000-0x40165000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
100423 PID:2cc0652 TID:234063a OSAXST1: >>> Loading Module 'System_Reboot_DEBUG.exe' (0x9E4C379C) at address 0x00010000-0x00016000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
PB Debugger Loaded 'System_Reboot_DEBUG.exe', no matching symbolic information found.
100435 PID:2cc0652 TID:234063a OSAXST1: >>> Loading Module 'locale.dll' (0x9E412C00) at address 0x40170000-0x401B1000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
100526 PID:2cc0652 TID:234063a OSAXST1: >>> Loading Module 'normalize.dll' (0x9E412E3C) at address 0x401E0000-0x401FF000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
100535 PID:2cc0652 TID:234063a CePerf.dll is absent - performance data will not be recorded
100537 PID:400002 TID:db0006 PM: DEBUGCHK failed in file d:\bt\2034\public\common\oak\drivers\pm\pdd\default\pwsdef.cpp at line 424
100538 PID:400002 TID:db0006 DefaultPowerStateManager::PlatformMapPowerStateHint: returning 2
100539 PID:2cc0652 TID:234063a The system is going to boot
100539 PID:2cc0652 TID:234063a Dll list:
100543 PID:2cc0652 TID:234063a OSAXST1: <<< Unloading Module 'coredll.dll' (0x9E411740) at address 0x40010000-0x40165000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
100543 PID:2cc0652 TID:234063a OSAXST1: <<< Unloading Module 'normalize.dll' (0x9E412E3C) at address 0x401E0000-0x401FF000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
100544 PID:2cc0652 TID:234063a OSAXST1: <<< Unloading Module 'locale.dll' (0x9E412C00) at address 0x40170000-0x401B1000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
100545 PID:2cc0652 TID:234063a OSAXST1: <<< Unloading Module 'System_Reboot_DEBUG.exe' (0x9E4C379C) at address 0x00010000-0x00016000 in Process 'System_Reboot_DEBUG.exe' (0x9E4C379C)
PB Debugger Unloaded symbols for 'System_Reboot_DEBUG.exe'
But, the system does not boot. Any conclusion with the above observations???Using SetSystemPowerState (NULL, POWER_STATE_RESET, POWER_FORCE) will finally call the KernelLibIoControl((HANDLE)KMOD_OAL, IOCTL_HAL_REBOOT, NULL, 0, NULL, 0, NULL)
you have to implement IOCTL_HAL_REBOOT Kernel IOCTL in OAL part of your BSP.
Please mark as answer, if it is correct.
Please vote,if it is helpful post.
Vinoth.R
http://vinoth-vinothblog.blogspot.com
http://www.e-consystems.com/windowsce.asp -
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
I put a windows xp cd in my macbook pro and rebooted the mac,mac doesn't come up any more and the cd doesn't come out,what can I do now?
Hossein,
As Guido said, you can use BootCamp to partition the drive. If you want to install, or reinstall Windows. You would launch BootCamp and it will actually guide you through the installation, you will only need to decide how large a partition you want. I would use BootCamp, I would not use disk utility. When you have installed Windows and you want to boot into windows, when you start your MBP hold down the option key, this will give you trha option of booting Mac OSX or Windows.
Joseph
Maybe you are looking for
-
How can user attach file to interactive form, and be read by abap program?
Hello, I created an abap interactive form, sent to the user, then user fills out the form fields, then it is uploaded back to sap, then my program reads this data and process it. It works. Now I want users to be able to attach any file they want, and
-
My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?
-
New security answers... But not receiving reset emails
Okay, so none of my answers to my security questions are right, but I am not receiving the email in order to change my questions... I tried changing the email that is set receive emails from Apple and it never changed.. HELP PLEASE
-
Hi, I am using a DLINK NAS (DNS-320L) and I am trying to set up a local back up of a folder on OS X and I keep getting a fail when I test the link out. I have managed to get it working on a PC, so I know I am on the right path. I'm obviously in 'Loca
-
HT1657 i tried to rent a movie and i cannot get it to play
it seemed like it didn't download. i waited for it to download for hours and then when it got to the end it just got stuck on "processing". Now it looks like when i try to re download it i get charged again.