VMware Fusion 3 and supporting Active X

If I install VMware Fusion 3 on a Mac will it support Active X? I'm needing to view cameras from a DDHCP website and this looks to be the only hold up.

Hi and welcome to Discussions,
since VMWare Fusion is not an Apple product it would be best to use their own support here http://www.vmware.com/products/fusion/support.html
To my knowledge Fusion supports ActiveX.
Regards
Stefan

Similar Messages

I am now running Windows 7 Ultimate on my Macbook Pro and the through VMware Fusion Software and I have a few questions about the ins and outs.

So far I have a few kinks to work out. While running Internet Explorer 8, I get the error message, " Cannot connect to the internet." In Networks on the control panel, it says that I am connected to a local area public network but there is no internet access. How do I establish a connection to my existing network which works with the mac os? Also, of course, programs like Adobe, Quick Time Player, and uTorrent/bitorrent are already installed on my computer. Do I have to download them again on windows or can I import them or share them somehow?

I am about to run specialized GIS software that may or may not need the full machine resources. I am an attorney who uses QuickBooks for my accounting. The Mac version does not do as much as the Windows version. This is from both Apple and Quick Books professionals. I am using Parallels Desktop version 8 at this time. It does not support QuickBooks Windows version per Parallels. Any other questions? I am a highly competent PC user who is new to Macs. I am entitled to my own configuration choices. That said, I know when I need help which is now.
As to the free space issue I have 665.18 GB free space out of 749.3 GB on the drive. I am not trying to run the 32 bit version. I know that it requires the 64 bit version. Besides, it does not get that far in the process. As I said Boot Camp asssitant terminates unexpectedly as soon as you hit the continue button after setting the partition size. Therefore I conclude that it does not have a chance to see which version of Windows that I am using. I am using Windows 7 Ultimate 64 bit version in the virtual engine (to use Parallels speak), but again Boot Camp would not see that since it is not running. It can't run at the momenet because Apple just installed a new hard drive and I have just restored the data from TIme Machine and Parallels needs reactivated, which I have not done yet deliberatley. With all of this addtiional information do you have any further suggestions? Thanks for your time and interest my issue.

VMWare Fusion and Parallels Desktop Benchmark Comparison

This is a quickie benchmark of VMWare Fusion and Parallels Desktop using Super PI, PC Mark 05, and Passmark.
VMWare Fusion 36932
Parallels Desktop 3094 Beta 2
Notes:
Both virtual machines were allocated with large 10+ GB virtual disks and 640MB of RAM. The VMWare CPU was configured with two processors. The Parallels CPU was configured with 1 (two is not available). VMWare reported the CPU as 1 physical, 2 logical processors running at 2.66 GHz while Parallels reported 1 physical, 1 logical processor running at 9.6 GHz (the combined speed of all four cores on the Mac Pro). The max observed CPU utilization in activity monitor when running under VMWare was 200% and max under Parallels was 173%.
I chose not to compare 1 VMWare CPU vs. 1 Parallels CPU. While Parallels does not support SMP or multithreaded processes on multiple processors the CPU utilization on the Mac went well above 1 core (173%). For this comparison, I wanted to see results of max processing based on what the two vendors have delivered, as opposed to benchmarking the underlying "virtual or hypervisor cpu" on a 1:1 basis. This explains why VMWare was 2x faster than Parallels on some CPU tests.
Both of these products are beta. VMWare is running in debug mode (can not be turned off in this beta).
Caveat emptor on these stats. This was an unscientific exercise to satisfy my curiosity. Some of the extraordinary differences are highlighted with <--.
Platform:
Mac Pro 2.66 GHz, 2GB RAM, Nvidia 7300GT
Disk 1 - OS X, 73GB Raptor
Disk 2 - dedicated disk where each virtual machine image was created separate from the OS or any OS-related virtual memory files.
VMWare and Parallels guest OS: Windows XP Professional, SP 2
Comparison Benchmrk
VMWare Fusion 36932 and Parallels Desktop 3094 Beta 2
Super PI Parallels VMWare
512K 8s 9s
1M 20s 21s
4M 1m 57s 2m 03s
PC Mark 05 Parallels VMWare
CPU Test Suite N/A N/A
Memory Test Suite N/A N/A
Graphics Test Suite N/A N/A
HDD Test Suite N/A N/A
HDD - XP Startup 5.0 MB/s 19.54 MB/s <--
Physics and 3D Test failed Test failed
Transparent Windows Test failed 69.99 Windows/s
3D - Pixel Shader Test failed Test failed
Web Page Rendering 3.58 Pages/s 2.34 Pages/s
File Decrypt 71.73 MB/s 67.05 MB/s
Graphics Memory - 64 Lines 179.92 FPS 111.73 FPS
HDD - General Usage 4.82 MB/s 42.01 MB/s <--
Multithread Test 1 / Audio Comp N/A N/A
Multithread Test 1 / Video Encoding Test failed Test failed
Multithread Test 2 / Text Edit 152.85 Pages/s 138.48 Pages/s
Multithread Test 2 / Image DeComp 5.91 MPixels/s 35.4 MPixels/s <--
Multithread Test 3 / File Comp 3.22 MB/s 6.03 MB/s
Multithread Test 3 / File Encrypt 19.0 MB/s 33.26 MB/s <--
Multithread Test 3 / HDD - Virus Scan 27.91 MB/s 25.49 MB/s
Multithread Test 3 / Mem Lat - Rnd 16MB 5.34 MAcc/s 6.63 MAcc/s
File Comp N/A N/A
File DeComp N/A N/A
File Encrypt N/A N/A
File Decrypt N/A N/A
Image DeComp N/A N/A
Audio Comp N/A N/A
Multithread Test 1 / File Comp N/A N/A
Multithread Test 1 / File Encrypt N/A N/A
Multithread Test 2 / File DeComp N/A N/A
Multithread Test 2 / File Decrypt N/A N/A
Multithread Test 2 / Audio DeComp N/A N/A
Multithread Test 2 / Image DeComp N/A N/A
Memory Read - 16 MB N/A N/A
Memory Read - 8 MB N/A N/A
Memory Read - 192 kB N/A N/A
Memory Read - 4 kB N/A N/A
Memory Write - 16 MB N/A N/A
Memory Write - 8 MB N/A N/A
Memory Write - 192 kB N/A N/A
Memory Write - 4 kB N/A N/A
Memory Copy - 16 MB N/A N/A
Memory Copy - 8 MB N/A N/A
Memory Copy - 192 kB N/A N/A
Memory Copy - 4 kB N/A N/A
Memory Lat - Rnd 16 MB N/A N/A
Memory Lat - Rnd 8 MB N/A N/A
Memory Lat - Rnd 192 kB N/A N/A
Memory Lat - Rnd 4 kB N/A N/A
Transparent Windows N/A N/A
Graphics Memory - 64 Lines N/A N/A
Graphics Memory - 128 Lines N/A N/A
WMV Video Playback N/A N/A
3D - Fill Rate Multi Texturing N/A N/A
3D - Polygon Throughput Multiple Lights N/A N/A
3D - Pixel Shader N/A N/A
3D - Vertex Shader N/A N/A
HDD - XP Startup N/A N/A
HDD - Application Loading N/A N/A
HDD - General Usage N/A N/A
HDD - Virus Scan N/A N/A
HDD - File Write N/A N/A
Processor Intel Core 2 9653 MHz Processor Unknown 2661 MHz
Physical / Logical CPUs "1 Physical, 1 Logical" "1 Physical, 2 Logical"
MultiCore 1 Processor Core Multicore 2 Processor Cores
HyperThreading N/A N/A
Graphics Card Generic VGA Generic VGA
Graphics Driver Parallels Video Driver VMWare SVGA II
Co-operative adapters No No
DirectX Version 9.0c 9.0c
System Memory 640 MB 640MB
Motherboard Manufacturer N/A Intel Corporation
Motherboard Model N/A 440BX Desktop Reference Platform
Operating System Microsoft Windows XP Microsoft Windows XP
Passmark Parallels VMWare
CPU - Integer Math (MOPS) 112.35 230.31 <--
CPU - Floating Point Math (MOPS) 280.46 588.33 <--
CPU - Find Prime Numbers (OPS) 446.37 676.99 <--
CPU - SSE/3DNow! (MMPS) 2118.56 4737.13 <--
CPU - Comp (KB/s) 2994.16 5952.34 <--
CPU - Encrypt (MB/s) 18.09 36.27 <--
CPU - Image Rotation (IRPS) 598.21 1184.41 <--
CPU - String Sorting (TPS) 2118.81 3672.59 <--
Graphics 2D - Lines (TPS) 220.71 25.15 <--
Graphics 2D - Rectangles (TPS) 189.74 61.8 <--
Graphics 2D - Shapes (TPS) 39.54 13.71 <--
Graphics 2D - Fonts and Text (OPS) 190.39 75.88 <--
Graphics 2D - GUI (OPS) 439.77 63.72 <--
Memory - Allocate Small Block (MB/s) 2533.83 2526.21
Memory - Read Cached (MB/s) 1960.5 1906.27
Memory - Read Uncached (MB/s) 1871.79 1826.08
Memory - Write (MB/s) 1687.81 1545.43
Memory - Large RAM (OPS) 60.99 46.37
Disk - Sequential Read (MB/s) 102.11 76.45 <--
Disk - Sequential Write (MB/s) 58.33 50.9
Disk - Rnd Seek + RW (MB/s) 51.4 40.4
CPU Mark 711.08 1432.72 <--
2D Graphics Mark 743.31 176.5 <--
Memory Mark 599.94 580.38
Disk Mark 766.11 606.7
PassMark Rating 557.27 637.35<br>

Thanks for posting these numbers - it's an interesting comparison.
I would expect the final VMWare fusion performance numbers to be quite a bit better than that of Parallels - they have almost a decade's worth of experience more than the Parallels folks in this arena, and a much larger development team to boot.
Once VMWare Fusion is released to the public, I think that you'll see a clearer distinction between the two products. VMWare will continue to appeal to the professional customer, with a more robust feature set and corporate-friendly features (and a correspondingly higher price tag); Parallels will fall more into the consumer/VirtualPC-replacement market. It will be interesting to see how Parallels will be affected when (and if) VMWare player is ported to OS X.
Interesting about the Parallels performance stats on a native partition - looks like almost enough reason to avoid the bootcamp partition approach altogether. Sharing a native windows installation with a VM in parallels is a pretty scary situation in any case, as the two environments have entirely different hardware configurations. Do-able, but there is some black magic involved (if you want to see an example of what I mean, try to move a windows installation from one machine to another w/different hardware sometime - it ain't pretty); I wouldn't try this in a production scheme unless I had REALLY good backups.

VMWare Fusion and slow system: solution

Having seen few answers to this problem on the Forum and many posts with the same issue, and finally figuring it out myself, I post a solution to the sluggish behaviour of SnowLeopard when VMWare Fusion 3 is running, and the beachball keeps appearing whenever you do anything else outside Fusion.
I had allocated a lot of memory to the virtual machine during installation (with 4 Gb on board I thought let's make it fast) but this turns out to be a bad idea.
• do a restart fo your Mac and wait untill all startup processes have finished (VMWare should NOT be one of the startup processes in this test)
• turn on the activity monitor and open the tab System Memory.
• now fire up your virtual machine and check how much memory is set to INactive. In my case this was a lot, reducing free memory to almost zero
So for any other activity that is going on behind the scenes (emails, dropbox syncs, TimeMachine etc etc), memory swaps are necessary which take time (and may lead to crashes sometimes).
To solve this issue
• shot down virtual machine (not VMWare Fusion
• select Virtual Machine > Settings > Processors & RAM and trigger the help file to get instructions depending on your requirements.
e.g. virtual Windows XP, running only Office or a browser, requires no more then 1 processor, 512 Mb RAM.
• now start your virtual machine again and check the Memory usage in the Activity Monitor. Your system should be a lot snappier now.

Sijmons wrote:
Having seen few answers to this problem on the Forum and many posts with the same issue, and finally figuring it out myself, I post a solution to the sluggish behaviour of SnowLeopard when VMWare Fusion 3 is running, and the beachball keeps appearing whenever you do anything else outside Fusion.
I had allocated a lot of memory to the virtual machine during installation (with 4 Gb on board I thought let's make it fast) but this turns out to be a bad idea.
There's a free electronic book (because of sponsorship by VMware): Take Control of VMware Fusion 3" (http://www.takecontrolbooks.com/vmware-fusion-3) that has advice on RAM allocation with VMware Fusion 3 and many other topics. You might find it useful.

Run Windows 8.1 Pro on a SDXC card via VMware Fusion

Hi everyone,
I'm kinda new to the whole Mac story.
Have been using iPhone and iPad from day one, but never could get myself to go off Windows.
Well, a few weeks ago I bought myself a 13.3" MBP (Mid 2014 - 11.1 model).
It's the retina one with a 256GB SSD in it.
Now my question is...
I have a license from work for VMware Fusion 7, and I need some programs to run on Windows.
But I don't wan't to partition my drive and run it via bootcamp, I want to keep my Mac clean.
Does anyone have experience or know if I can run this on a SDXC card?
I would use a 128GB SDXC card with 60MB/s write and 80MB/s read.
Can I stick this SD into the slot, install Windows 8.1 Pro via Fusion on this card and let it run on a decent level?
Thanks in advance,
And with best regards,
Sonicje

Thank you for the fast responds.
I took a look into it and you are right.
The read/write speed is much higher and cheaper.
But, like I said, I'm nog willing to share my drive with Windows.
So I'm going to buy a 64GB USB stick (less than 60 euro) and going to install it on that source.
With 64GB I've some extra space for the futher if I need to work with more Windows only programs.
Thanks again for the advice!

How do I activate Windows 8 using vmware fusion on my MacBook Pro?

I have a MacBook pro and there are a few Windows programs that I need to run. So I purchased VMWARE Fusion 5 and Windows 8 pro. I installed both with no issues except now I'm being prompted to activate windows. When I go to activate it with the product key, it says that the product key is only able to be used for upgrading, but not a clean install. I'm not sure what I need to do now. Any help will be greatly appreciated.

Yes as with Windows 7 if you used a Upgrade Win 7 disc it won't WANT To Activate and to get around it you do another install of Win 7 over the top of the original Win 7 install and it make it look like you are Upgrading and allows you to use an Upgrade key.
MS really screwed up with Win 8. There really isn't any FULL VERSION Windows 8 install DVDs. They are all Upgrade DVDs no matter how much you pay for it. So to do a Clean install, on real hardware or in a Virtual Machine, you have to jump through some hoops.
mclarenman500 wrote:
oh ok. thanks for clarifying that for me

Bootcamp partition restriction with vmware fusion

I have a 2 TB hard drive on my iMac that I was going to use to install windows. Using bootcamp, all went well. I put Vmware Fusion on and it worked well. Later I thought it might be nice to have 2 partitions on this hard drive so I re-partitioned the hard drive (not using bootcamp) and then installed windows, again no problem. The problem occurs when I then put on Vmware Fusion. Seems that program is very sensitive to the bootcamp created partition and to use any other program causes Vmware Fusion to fail. Doing some research, I thought I read that bootcamp will ONLY create one partition, no option for two partitions. My question is: Am I reading this correctly? Can bootcamp only make one partition? Is there a hack around this? I hate having a 2 TB hard drive with only one partition.

Hi again,
Boot Camp is a (very limited) utility for creating a non-mac partition on a Mac volume (by Apple). That's why it'll allow to create only 1 partition on a Mac OS hard drive.
This has to be on the HD where there is Mac OS X already - so you can't use BootCamp on your 2nd HD.
If you install 2nd macOS on the 2TB HD, start from there & then partition it with BC, then you should be able to start a bootcamped windows from there.
VMware doesn't have to be used with the help of BootCamp - I have both Parallels & VMware installed without the BootCamp.
As a matter of fact you can install Parallels & VMware from an .iso image (which you can't use with BC) - but Windows has to be installed the same way as with BS = it will take ± 1hour to install.
Also - you can store the resulting 'file' (which in my case I'm storing on my external 'My Book' 2TB hard drive) on any HD which is connected to your iMac.
The 'file' is stored as 'Windows 7.vmwarevm' - my is 13Gb actual size but with-in the win7 I have on it the size is = 40Gb {Local Disc (C:)}.
All these 'Virtual Machines' are automatically compressed by the VMware application.

VMware Fusion 6 vs Parallel desktop 9? Which is better?

I am planning to install Windows in my Mac. Can anyone suggest which one is better between VMWare Fusion 6 and Parallel Desktop 9. I use the window only for running the internet explorer and plan to setup Windows 7 Home. Thanks

Hello jsujana,
To answer your question, a free alternative as mentioned above is not too harsh of an idea. On the other hand, if you did want to purchase VMware of Parallel right now, I would definitly suggest Parallel.
They both are very similar programs, but here is a comparrison chart for you to make the ultimate decision based on your needs - http://en.wikipedia.org/wiki/Comparison_of_VMware_Fusion_and_Parallels_Desktop
The only reason I'd suggest one of these well known Virtual Machines over the free versions suggested above is for coherence mode.
I do want to ask, why are you doing all of this to simply run Internet Explorer?
Best of luck!

Which version of windows 7 is needed for vmware fusion 5 - 32 or 64 bit

I just downloaded VMWare Fusion 5 and am in the process of getting Windows 7 from the Microsoft Store. Which version of windows is needed to run properly on my Mac - 32-bit or 64-bit? I believe it's the .iso application too, right?
Thanks!

vegasgator wrote:
here are my specs:
i've got a 2.3 GHz i7, 8GB RAM
I only plan on running 3 Windows programs thru Fusion and Internet Explorer some. i think i want to save as much capacity or power for my Mac so would 32-bit be better or does that not make a difference?
Thanks again
32 or 64 makes little difference, and when you are not running Windows (Fusion) your Mac has all the power it had before you installed Windows.

VMware Fusion suddenly hogging resources and fan running constantly

I have had my MacBook for about a year now and until 2 weeks ago had no problems with this issue before. Now suddenly, if I launch VMware Fusion (even not running any programs) the MacBook fan comes on and stays on. When I launch the Mac "Activity Monitor' App, sure enough VMware is hogging all the resources. I have added nothing to the XP side of things during this time. Any ideas on what might be happening as the constant fan 'on' issue is a pain and it FEELS like it's a drag on regular Mac performance. Thanks.

Is it possible that your Anti-Virus software (Not sure if you installed one) is performing a scheduled virus scan at bootup? Until that is finished, it will continue to attempt to start/finish the scan at boot up.
Just a thought.
Axel F.

VMware Fusion is activated even if I do not want it

Hello,
I started using my first Apple a couple of weeks ago and have installed VMware Fusion to be able and use the occasional Windows Application. It is very impressive, especially in the Unity Mode. What have I been doing all this time with my Windows based computers?
One thing is puzzling me however. The Fusion / Windows XP environment is sometimes activated when I don't want it. For instance when clicking a hyperlink from the dashboard the hyperlink starts Internet Explorer in the VMware XP environment instead of simply starting Safari. How can I prevent this from happening. I want to start XP manually and only when there is no alternative available.
Any input is much appreciated.
Thanks, Hans.

Open Safari in OSx and:
1. Click Safari from the top menu and choose Preferences
2. Click on General (Left Most Icon)
3. Next to *Default Web Browser* choose Safari.app (Ensure that nothing with the indication of bootcamp is chosen here).
You should now have Safari as default in OSx instead of a Browser in Boot Camp.
Axel F.

Display Questions with Retina and VMware Fusion (Windows 7/8)

Looking to buy my first MacBook Pro and looking to make sure I get the specs I need and have a couple of questions.
I would like to be able to run (simultaenously)
During the day for work:
Windows 7 x64 - 30GB HD - 1 Core - 1GB Ram - Purpose: Has a VPN client that allows me to VPN and RDP only
Windows 8.1 x64 - 60GB HD - 2 Cores - 4GB+ Ram - Purpose: Office 2013 installed on this VM and all my other work applicatons (light weight)
OSX 10.10 - Whatever it can take - Light Web Browsing etc while at work.
After work:
Guess it doesn't matter really - i'd like to play games (bootcamp fine) if possible too. Nothing crazy so barely worth mentioning.
My main questions:
Display: Iris Pro or nVidia - Can the base 15 inch GPU/CPU handle the two VMs at the same time plus the host OS (OSX) without hiccups?
Display: How does VMware Fusion recognize the discrete GPU - will the system be smooth/quiet without activating it?
Battery life: Virtualization is pretty heavy battery wise. Does anyone know what happens to the battery when you're running a couple VMs?
Display: How is running Windows 7/8 on a MacBook with a specifically retina display? Do the Windows PCs look really ugly/blurry due to such a high resolution?
What is the minimum hardware required for these VMs to run fast and responsive? (CPU/GPU/RAM only)
Thanks!!

Sorry - we're users here, just like you, and some questions just get lost sometimes.
The fastest hardware you can buy, the easier you'll be able to run Windows. If you use Boot Camp to run Windows (7, 8 or 8.1) the machine will run at it's best. If you want to run Windows alongside the Mac OS, you'll need to use a VM application (I use Parallels - I've tried VMwareFusion but like Parallels better and it just works best for me).
So, to your questions:
The Retina machine with the NVIDIA GPU will be the fastest - it's a faster processor and has more VRAM.
Any VM is going to use resources - how much RAM, for example, is up to you. I have 16 GB of RAM and 8GB dedicated to Parallels/Windows 7 Pro.
I wouldn't (and you really can't) run a VM for very long on battery. If you're using VM's, that's the time to plug into mains. Running a 'couple' of VM would put further heavy use on your GPU, CPU and shorten your battery life.
I would make sure to get a good, fast quad-core i7 processor, the 2GB of VRAM NVIDIA GPU and the maximum amount of RAM (16GB).
Good luck,
Clinton

Bootcamp and VMWare Fusion, possible problem with Bootcamp, cant see USB.

Hey,
Would really appreciate your help. So I have MBP mid 2010 with the latest version of OSX Mountain Lion and decided to install Windows 7 on it. I gave it to the professional IT guy, who installed Windows 7 through the latest version of VMWare Fusion. It is not bad overall, but at times incredible slow (which might be because of my slow processor).
So I decided to install Windows 7 through the BootCamp Assistant - USB way. And did the following steps:
1)Format USB, put Windows 7 .iso image on it
2) Installed the latest Windows software through the Bootcamp (step2 tick). However, it said that the latest version would be installed only after Windows 7 is installed (in step3 tick). I clicked OK and moved to Step 3
3) I started Installing Windows and had a few errors (which were solved by repairing the HDD after rebooting in recovery mode), but all went fine until almost the end. Before the bar almost moved to the end my macbook went to reboot and I though it was all done and ready. I clicked the alt at *ding* sound and no USB was detected.
I checked disk utility and the thing was portioned.
I was thinking that MBP doesn't recognize the second Windows installed, and VMWare Fusion needs to be deleted in order to run Bootcamp. I haven't deleted anything, wanted to ask for advice first.
Any one could think of what's wrong? Thank you.

You can only install Windows from a USB in one of these computers:
- MacBook Pro with Retina display.
- MacBook Air.
- Mac mini (Mid 2010 and newer).
- iMac (Late 2012).
Your Mac doesn't support the Windows installation through a USB drive. However, you have installed Windows through a USB drive. What did you do?
You did an EFI installation (or a native installation). Apple doesn't support this option because of the huge number of problems it gives, and you have probably erased OS X (or you erased the Windows partition that Boot Camp created, both possibilities). The error you mentioned in 3) was probably that the Windows installer detected that you have a MBR disk instead of a GPT one, and you erased everything.
First of all, to make sure that you erased everything, hold the Option (Alt) key while your Mac is starting. If you see the OS X partition, start up from it, and make a complete backup of your files with Time Machine.
Then, what I recommend you is to erase the whole drive by starting in Internet Recovery (hold Command, Option and R keys while your Mac is starting), and use the Time Machine option to restore your files

VMware Fusion and Apple LED Cinema Display

I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
4) The resolution ia 1277 x 1234. That is weird.
5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
Something is wrong, Any help in fixing this would be greatly appreciated.
Bryan

you have to separate out what is Fusion and what is Windows native.
Even doing updates to Windows sometimes should not or cannot be done properly in VM.
And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

VMware Fusion 3 and supporting Active X

Similar Messages

Maybe you are looking for