VMWare Fusion, Boot Camp, and Orb

I'm trying to use Orb to stream audio files (podcasts downloaded daily within iTunes to be exact) to a Blackberry. Orb is currently only Win compatible (meaning the streaming can only be done from a Win computer), so I've got VMWare Fusion loaded on the Mac running Windows XP via a Boot Camp partition (I think I've described this properly). In order to enable the XP side to access the podcast files, I've set up shared folders within VMWare Fusion, and then targeted those shared folders within Orb to be streamed.
The problem is that Orb is supposed to regularly rescan those folders looking for changes to the content (as in new podcasts), but this doesn't seem to be happening. And I'm wondering if anyone has idea as to why. Could it possibly be because I am doing Windows via a Boot Camp partition? I see within Fusion that I can't use mirrored folders in this setup (Windows in a Boot Camp partition...at least I think this is the case). Would that make a difference (mirrored folders vs. the basic shared folders approach)?
I know this is sort of in the weeds in a non-Mac product (Orb), but it will make my wife really happy on her two hours of daily commuting if she can access those podcasts without having to remember to attach the iPod to the computer every night, which this setup (if it works properly) should enable her to do. The Blackberry is always with her.
Thanks very much.

Yes, you need to make some changes, for some reason VMware still claims non or limited support for 64-bit but you can edit a file and work around the problem. When creating a fresh new Fusion environment for Vista.
http://communities.vmware.com/community/vmtn/desktop/fusion

Similar Messages

How many licenses for Windows 7 via both Boot Camp and either VMware Fusion or Parallels on the same MacBook?

This concerns a white MacBook running OS X 10.5.8 Leopard.
If I install Windows 7 on my MacBook with Boot Camp, and then use either VMware Fusion or Parallels to access that Boot Camp partition, will I need to buy two Windows licenses from Microsoft?
I had not anticipated this, but when calling VMware and Parallels to check out the tech support services of the two companies, the person at VMware mentioned that I would need two licenses. When I called Parallels, I then asked the person at that company whether two Windows licenses would be needed. That person told me that only one license would be necessary.
I then called Microsoft. The representative there told me that my question could not be answered by Microsoft because that company does not provide support for users installing Windows on Apple computers.
After that, I called Apple. The Apple representative was not familiar with this type of issue. She mentioned the possibility that the VMware Fusion and Parallels products might be different, and that that might be why using the former would involve two licenses and using the latter would involve only one license.
Has anyone had experience with installing Windows 7 via Boot Camp, and then accessing that Windows 7 installation from VMware Fusion or Parallels? If so, did you have to buy two Windows licenses?

One license. You may have to re-register Windows online when you start it up in Parallels because Windows sees that it is now running on new hardware (virtualized) and thinks it has been installed on a new computer. If the online re-registration does not work, just call the registration number and go through the automated registration process. Once re-registered then use Windows from Parallels. If you are also installing MS Office in Windows you will need to go through the same process again for registering Office.
The process is automated, simple, and free. You have made the process more complicated than it is by calling Apple, Parallels, and Microsoft when there is an automated MS registration number to call.

Can you run Boot Camp and Fusion at the same time?

Hi,
I had boot camp installed on my mac pro and loved it. I decided to get greedy and install Fusion using the boot camp partition. The Fusion install went ok but then Microsoft started to get fussy. Every time I would do something on Fusion it would ask me to "Re-activate Windows" when I logged into boot camp. Maybe if I saw Fusion fully working I wouldn't want to run boot camp any more but I think I want to have the option to run either. Right now I only have 1 gig real memory on my mac pro and Fusion seems a little slow compared to native boot camp. Can I run both boot camp and fusion without having to buy two native copies of Windows XP pro? I don't want a "sensible" answer, I want an answer that takes into account how Microsoft treats this re-activation situation.
I guess Leopard might make this all obsolete, but until then .....
... Flash Gordon

You need to make sure to install VMware Tools into your virtual machine (while booted into Windows via Fusion). Once you do this you shouldn't have to continually activate Windows when going back and forth from Boot Camp to Fusion. I've seen this discussed over on the VMware Fusion discussion boards, so you may want to look there for more details.
Also, if Windows starts telling you it's been activated too many times, you can call Microsoft and they'll give you an alternate activation key. The phone number is listed on the Windows error screen. I had to do it and they were very accommodating. I just told them I was running Windows in a virtual machine, and there were almost no questions asked.
You don't need to buy 2 copies of Windows to run both Boot Camp and VMFusion.

How to run WinXP Pro on iMac using both Boot Camp and Fusion/Parallels

I have read on various forums that there is a specific order in which you need to install Windows XP on an Intel-based Mac (mine is a new iMac running Leopard), so you can run it natively with Boot Camp and simultaneously with OS X 10.5 using a third-party program such as VMWare Fusion or Parallels.
Does anyone know the installation procedure/order in which to install VMWare (or Parallels) and XP (I bought a standalone copy of XP Pro), so that I can also run XP Pro natively using Boot Camp?
I have been using Parallels for a year, but am thinking about switching to Fusion. Any thoughts on which one is preferred would be greatly appreciated.
Thanks!

I am using Fusion 2.1 on a MacPro Duo. Installed it after creating a boot camp partition.
Follow the instructions with fusion for multiple options. I boot into WXP Pro to use multi-monitors for work-related stuff on a corp. network. Otherwise, I use a virtual machine using the bootcamp partition to run both OS's simultaneously. Fusion is great (USB support, firewire, etc.) but does not yet support multi-monitors. Be sure to install boot camp drivers off of the Leopard DVD on the boot camp WXP machine AND on each/all virtual machines.......then everything works great!
Before you set all of this up, decide how large you want your boot camp partition to be. Once you create it, you cannot change it (and the virtual machine off of boot camp either). I have grown into another hard drive and have to start over from scratch rebuilding my corporate windows machines!

Help Put An End to Windows Activation Issue in Boot Camp and Fusion

Several people have indicated you should set it up Fusion first before you activate Windows. Does that mean you activate in Fusion before Boot Camp? What is also not clear is the reason for this and whether this bypasses the issue of having to activate Windows twice - once in native mode (Boot Camp) and once in VM (Fusion), if you intend on using Windows in both Boot Camp and Fusion.
I'm hoping to finally put an end to this ongoing question and issue since I've yet to find a definitive answer on several boards. The only answer I was able to find was that you have to activate Windows in both native and VM but this obviously conflicts with what a few people have posted, unless of course I have misinterpreted what they've stated.

Thnx. My MBP has a built-in optical drive, so that explains the first screen without the option to create the installation disk.
So the problem remains to get Boot Camp recognize the installation disk. I tried to create an 8 GB (and after that even a 16 GB) installation disk on a USB stick and add the Boot Camp files to this stick. Next screen, Boot Camp still asks to insert the Windows Installation Disk. After that I burned the iso on a new DVD to be able to insert an original disk in the optical drive, but even this did not work out.
Today I called Microsoft to tell me whether I was taking the right steps, but this guy couldn't help me either. "I should not install windows in a partition, but I should use parallels to install it under iOS..." ?
The iso I have is an original disk image of Windows 8.1 Pro NL, meant to make a clean install. So what am I doing wrong?

Boot Camp and Windows 7 Problems

I have found a reproducible bug with Boot Camp and WIndows 7.
Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

Can I use Windows XP Home with Boot Camp and/or Parallels or VMFusion?

I am planning on purchasing a new Mac Mini with Snow Leopard. I have a copy of Windows XP Home Edition that came with a 7 year old Compac computer, can it be used with either Boot Camp and/or Parallels or VMFusion? I REALLY don't want to purchase Windows if I can help it. Thanks!

Read the boot camp requirements. I believe you will need a Windows disc that is stand alone. By that I mean a Windows disc that is not designed for a specific computer like your Compac. I believe that applies for Parallels and Fusion as well. Some of the newer disc that come with new computers may work since some of them are stand alone. I think your compac disc maybe married to your computer. You can try it when you get your Mac but it may not work.

Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Time Capsule Installation on VMware Fusion Windows xp and Mac 10.5.2 sides

I've got the Time Capsule w/ time machine working on the Mac side of my laptop, and yet am avoiding a second attempt to load / install the same on my XP side due to the first time I tried, it didn't work and I had to go back and re-install it on the Mac side.
I'm assuming that the currently working 'Time Machine' is only able to see and back-up, via the Time Capsule, the Mac side of the hard drive? Although, if it sees the whole drive, both XP and OSX sides, then all is good, and my windows based data is being backed-up.
Maybe the Time Capsule can only work with windows as an external drive,
and yet hoping it can also work as a semi automatic back-up disk.
Appreciate any insight, advise and/or references to material that would help.
Thanks

I asked this very question on another forum, as I had received differing answers previously. Here is the link to my question and to the answers I received, which seem pretty dispositive. http://forums.macrumors.com/showthread.php?p=5305380#post5305380
As you will see, the short answer is that the Win side is not being backed up, but how you should configure your TM backups of your Mac side depend on whether or not you first partitioned with Boot Camp and then installed VM Fusion, or whether you installed Fusion without Boot Camp. (I now use Windows Live OneCare to back up the Win side to the TC, although configuring it to work with TC was a nightmare I care not to have ever to repeat.)

HT1846 can i install boot camp and run explorer 9 on my mack

I need to be able to use Internet explorer (7 or higher) on my Mac. If I install boot camp and windows will I be able to?

Yes.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Lose airport connection after using boot camp and windows XP

After using windows XP on boot camp and shutting down windows and booting to Mac OS 10.5.7 I lose the airport connection and have to restart or reset my airport extreme base station. My imac 2.8 is connected to airport via ethernet. Air port is operating on 5.7 version. This is a recent development and suspect it is related to updates in windows. I do not know where to start but need to solve this problem as it interrupts the other computers on wireless. Thanks Carl

I have solved problem. It was in the windows settings using airport rather than ethernet connection. Carl

Lion, Boot Camp and Windows 7 Issues

Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
Let me start off with my specs and then I will ask my questions:
iMac 27"
i7 Quad Core (1st gen)
16GB Ram
1TB HDD
OS X Lion (Fresh Install - Not Upgrade)
All updates for OS and iLife and other installed software:
Adobe Creative Suite CS5
MS Office 2011
Boot Camp 4.0
Window 7 Ultimate
Ok... here are my questions.
When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
However, when I resart i can hold down the ALT key and get this menu:
I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
Overview:
Why do I get the Tuxera NTFS error?
Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
I can't get Windows to update? Any ideas?
Thanks for any help you can provide.

These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

Problems with Boot Camp and Drive Partition

First of all, let me preface this by saying I have in the past successfully partitioned my drive and installed Windows, but it was a while back and I can remember it was frustrating, but I don't remember the exact details. Also, I apologize for the rambling nature of this problem, but I'm trying to give as much relevant information as possible and walk through the steps I took to get where I am now.
Feel free to skip ahead to the end, the main problem seems to be I tried to create a 300 GB partition, but it didn't take or something. Now my storage is reflecting I've lost 300 GB, but it won't recognize the existence of the new partition.
Let me just walk through what I did. I deleted my previous partition because I was having some difficulties with a few programs and the partition ended up being too small and I wanted to make a bigger one anyway. I only use it for gaming and didn't care about any of the saved games so I just deleted the partition and figured I'd start over from scratch.
Before I begin, some technical details about the computer I'm working with. I don't know how much of this is necessary, but here it is:
It's a 27-inch late 2012 iMac with a 3.4 GHz Intel Core i7 processor with 24GB RAM running OSX 10.9.4
The storage space is a little more difficult as that is part of the problem I'm running into, which I'll get to in a minute.
Anyway, I have a Windows 7 Professional install DVD and a burned CD called Boot Camp, which I think is the drivers from last time I installed Windows (a year and half ago?), but since I needed Superdrive for the install DVD I just used an XHD I had to put the drivers on (like I said, I don't remember how I did it last time). I go through Boot Camp and look at how much space I have and how big I want to make my partition.
Side note: Last time I made my partition, I'm fairly certain I set it to 200 GB, but the partition size actually came out to something like 112 GB or something significantly less. I didn't know what happened, but figured it would still be enough space and it had been such a hassle I didn't bother doing it again.
Supposedly I have a 1 TB HD, and I can't remember exactly what it said when I partitioned the drive this time, but it definitely said I was using less than half of my capacity and I had plenty of room, so I opted to go for a 301 GB partition (the slider wouldn't let me do exactly 300) which still left me with around 300 GB of space left over on my Mac partition I want to say. I went ahead with it and it started partitioning the drive with the blue line moving very slowly and after an hour or so it was like 80% across but no longer making progress. I looked online and people said that shouldn't happen. I cancelled the partition and the Disk Utility showed the partition, but said it was unmounted or something.
I restarted my computer thinking maybe I'd try and see what would happen if I tried to boot it up as if I had Windows installed. I also at that moment remembered that I'd had a similar problem last time because I had my XHD plugged into my USB port so I unplugged that and held down OPT. It then showed me my Mac HD drive and a CD icon that said Windows, so I clicked on that figuring maybe I could install it after all.
It led me through a Install manager and it got to the point where it asked what drive/partition do you want to install Windows in, I recognized the screen and remembered I was supposed to choose a certain one, but couldn't remember which one and none of the sizes seemed to match the storage I had allocated to the partition. One was about 200 GB and since the last time I did it my partition came out 100 GB smaller than I had set it for I thought maybe that was it.
However, it said I couldn't install on that drive for some reason (I can't remember exactly what it said). So I restarted again and figured I'd go back and see what I did wrong and start over. When I check Disk Utility it no longer sees any partition (mounted or unmounted or anything) and that the entirety of my HD is dedicated to Mac HD.
The problem is, now I'm getting weird reports about the size of my drive, the amount used, and the space available. Disk Utility tells me I have 1.12 TB capacity, 301 GB available, and 819 GB used. That doesn't even add up. Furthermore, when I click get info on Macintosh HD, it tells me I have 810 GB capacity, 364 GB available, and 446 GB used. When I click on About this Mac and go to System Report and storage I get this:
Macintosh HD
Available: 364 GB
Capacity: 810 GB
Logical Volume Group:
     Name: Macintosh HD
     Size: 1.12 TB
     Freespace: 301 GB
Physical Volumes:
     disk0s2:
   size: 121 GB
     disk1s2:
     size: 999 GB
Now I really don't know what to make of it. That 301 GB free space makes sense as the partition I tried to create and if I add that to the 446 GB used on my Mac partition, plus the 364 GB available, that adds up to 1.12 TB (roughly, I've rounded off these numbers).
But how come Disk Utility doesn't recognize the partition then? What should I do from here?
I couldn't find anyone asking this exact type of question or running into this same problem before, so I hope I'm not asking about something that's already been answered. If that's the case, if you could direct me to where I can find the answer I'd be appreciative.
Otherwise, any help or light that can be shed would be most appreciated.
Thanks!

The problem seems to have gone away. I did click on repair disk in Disk Utility, I'm not sure if that did anything, but now when I run Boot Camp Assistant it is showing me the correct free space, so I don't know what happened. Oh well.
Still having trouble getting the **** thing to partition, but that topic is covered extensively elsewhere.

VMWare Fusion, Boot Camp, and Orb

Similar Messages

Maybe you are looking for