VMware Fusion Ideal Settings for Best performance
Can someone please help with the ideal settings for VMware Fusion on mac for best performance.
My Machine Details
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
Processor : 2.8 GHz Intel Core
Memory : 16 GB 1333 MHz DDR3
Storage : 750 GB SATA Disk
Graphics : Intel HD Graphics 3000 512 MB
Am using VMware Fusion Version 4.1.2
At Present the resources I have allocated for VMFusion are
Processor : 1 Core
Memory : 4 GB
Thanks
Brij
VMware Fusion doesn't slow down the Mac just because having it installed. You have 16 GB of memory in the computer and you assigned 4 GB for the virtual machine you have, so you shouldn't have any memory problem. Also, your Mac has got a great processor that run virtual machines without any problem.
If you feel your Mac slow while running the virtual machine, just reduce the amount of memory assigned to the virtual machine, depending on the operating system you have in the virtual machine. For example, I recommend 2 GB or more for Windows 7, and you can run Linux virtualized assigning only 512 MB of memory
Similar Messages
-
Optimizing system for best performance/stability and a custom kernel
I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
Thanks.
Dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
[ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
[ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
[ 0.000000] 0000000000 - 007dc00000 page 2M
[ 0.000000] 007dc00000 - 007dd31000 page 4k
[ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 37492000 - 37a41000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
[ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
[ 0.000000] ACPI: FACS 000000007eecc000 00040
[ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007dd31000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
[ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007dd31
[ 0.000000] On node 0 totalpages: 515264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7989 pages used for memmap
[ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty1] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 2 loops
[ 0.000000] Detected 2393.995 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
[ 0.010013] pid_max: default: 32768 minimum: 301
[ 0.010061] Security Framework initialized
[ 0.010069] AppArmor: AppArmor disabled by boot time parameter
[ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.012201] Mount-cache hash table entries: 256
[ 0.012567] Initializing cgroup subsys cpuacct
[ 0.012573] Initializing cgroup subsys memory
[ 0.012588] Initializing cgroup subsys devices
[ 0.012592] Initializing cgroup subsys freezer
[ 0.012595] Initializing cgroup subsys net_cls
[ 0.012599] Initializing cgroup subsys blkio
[ 0.012653] CPU: Physical Processor ID: 0
[ 0.012656] CPU: Processor Core ID: 0
[ 0.012660] mce: CPU supports 6 MCE banks
[ 0.012673] CPU0: Thermal monitoring enabled (TM2)
[ 0.012679] using mwait in idle threads.
[ 0.015816] ACPI: Core revision 20120320
[ 0.021231] ftrace: allocating 17820 entries in 70 pages
[ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.066663] ... version: 2
[ 0.066663] ... bit width: 40
[ 0.066663] ... generic registers: 2
[ 0.066663] ... value mask: 000000ffffffffff
[ 0.066663] ... max period: 000000007fffffff
[ 0.066663] ... fixed-purpose events: 3
[ 0.066663] ... event mask: 0000000700000003
[ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.103350] Booting Node 0, Processors #1 Ok.
[ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.116575] Brought up 2 CPUs
[ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
[ 0.120053] devtmpfs: initialized
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
[ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
[ 0.123629] NET: Registered protocol family 16
[ 0.123872] ACPI: bus type pci registered
[ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.153700] PCI: Using configuration type 1 for base access
[ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
[ 0.153901] mtrr: corrected configuration.
[ 0.154568] bio: create slab <bio-0> at 0
[ 0.154568] ACPI: Added _OSI(Module Device)
[ 0.154568] ACPI: Added _OSI(Processor Device)
[ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
[ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160625] ACPI: Dynamic OEM Table Load:
[ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161153] ACPI: Dynamic OEM Table Load:
[ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: Dynamic OEM Table Load:
[ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161187] ACPI: Dynamic OEM Table Load:
[ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.161220] ACPI: Interpreter enabled
[ 0.161220] ACPI: (supports S0 S3 S4 S5)
[ 0.161220] ACPI: Using IOAPIC for interrupt routing
[ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.173981] ACPI: No dock devices found.
[ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.175505] PCI host bridge to bus 0000:00
[ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
[ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
[ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
[ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
[ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
[ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
[ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
[ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
[ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
[ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
[ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
[ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
[ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
[ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
[ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
[ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
[ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
[ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
[ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
[ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
[ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
[ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
[ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
[ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
[ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
[ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
[ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
[ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
[ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
[ 0.176140] pci 0000:02:00.0: supports D1 D2
[ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
[ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
[ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.184581] pci 0000:03:00.0: supports D1 D2
[ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
[ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
[ 0.185056] pci 0000:04:03.0: supports D1 D2
[ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196707] vgaarb: loaded
[ 0.196709] vgaarb: bridge control possible 0000:00:02.0
[ 0.196788] PCI: Using ACPI for IRQ routing
[ 0.197237] PCI: pci_cache_line_size set to 64 bytes
[ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
[ 0.197573] NetLabel: Initializing
[ 0.197576] NetLabel: domain hash size = 128
[ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197601] NetLabel: unlabeled traffic allowed by default
[ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210013] Switching to clocksource hpet
[ 0.222129] pnp: PnP ACPI init
[ 0.222158] ACPI: bus type pnp registered
[ 0.222675] pnp 00:00: [bus 00-ff]
[ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.223455] pnp 00:02: [io 0x0300-0x031f]
[ 0.223473] pnp 00:02: [irq 6]
[ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.223606] pnp 00:03: [io 0x0000-0x001f]
[ 0.223610] pnp 00:03: [io 0x0081-0x0091]
[ 0.223614] pnp 00:03: [io 0x0093-0x009f]
[ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
[ 0.223621] pnp 00:03: [dma 4]
[ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
[ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.223883] pnp 00:05: [irq 0 disabled]
[ 0.223893] pnp 00:05: [irq 8]
[ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.224028] pnp 00:06: [io 0x00f0]
[ 0.224038] pnp 00:06: [irq 13]
[ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.224132] pnp 00:07: [io 0x002e-0x002f]
[ 0.224136] pnp 00:07: [io 0x004e-0x004f]
[ 0.224139] pnp 00:07: [io 0x0061]
[ 0.224142] pnp 00:07: [io 0x0063]
[ 0.224145] pnp 00:07: [io 0x0065]
[ 0.224149] pnp 00:07: [io 0x0067]
[ 0.224151] pnp 00:07: [io 0x0070]
[ 0.224154] pnp 00:07: [io 0x0080]
[ 0.224157] pnp 00:07: [io 0x0092]
[ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.224164] pnp 00:07: [io 0x0680-0x069f]
[ 0.224167] pnp 00:07: [io 0x0800-0x080f]
[ 0.224170] pnp 00:07: [io 0x0810-0x0817]
[ 0.224173] pnp 00:07: [io 0x0400-0x047f]
[ 0.224177] pnp 00:07: [io 0x0500-0x053f]
[ 0.224180] pnp 00:07: [io 0x1640-0x164f]
[ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
[ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
[ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
[ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
[ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
[ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.224346] pnp 00:08: [io 0x0070-0x0077]
[ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.228737] pnp: PnP ACPI: found 9 devices
[ 0.228741] ACPI: ACPI bus type pnp unregistered
[ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
[ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
[ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
[ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
[ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
[ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
[ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
[ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
[ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
[ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
[ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
[ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
[ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
[ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
[ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
[ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
[ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
[ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
[ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
[ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
[ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
[ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.238088] NET: Registered protocol family 2
[ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.241999] TCP: reno registered
[ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.242207] NET: Registered protocol family 1
[ 0.242239] pci 0000:00:02.0: Boot video device
[ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
[ 0.242662] Unpacking initramfs...
[ 0.452648] Freeing initrd memory: 5820k freed
[ 0.456693] audit: initializing netlink socket (disabled)
[ 0.456719] type=2000 audit(1340724146.456:1): initialized
[ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.460514] VFS: Disk quotas dquot_6.5.2
[ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.460751] msgmni has been set to 3939
[ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.461121] io scheduler noop registered
[ 0.461125] io scheduler deadline registered
[ 0.461224] io scheduler cfq registered (default)
[ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.462374] vesafb: scrolling: redraw
[ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
[ 0.508030] Console: switching to colour frame buffer device 128x48
[ 0.551844] fb0: VESA VGA frame buffer device
[ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
[ 0.551868] intel_idle: does not run on family 6 model 23
[ 0.551930] GHES: HEST is not enabled!
[ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.552762] Linux agpgart interface v0.103
[ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.553759] i8042: No controller found
[ 0.553878] mousedev: PS/2 mouse device common for all mice
[ 0.553966] rtc_cmos 00:08: RTC can wake from S4
[ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.554221] cpuidle: using governor ladder
[ 0.554225] cpuidle: using governor menu
[ 0.554454] TCP: cubic registered
[ 0.554641] NET: Registered protocol family 10
[ 0.554976] NET: Registered protocol family 17
[ 0.554983] Registering the dns_resolver key type
[ 0.555206] PM: Hibernation image not present or could not be loaded.
[ 0.555216] registered taskstats version 1
[ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
[ 0.556299] Initializing network drop monitor service
[ 0.558944] Freeing unused kernel memory: 740k freed
[ 0.559290] Write protecting the kernel read-only data: 8192k
[ 0.568413] Freeing unused kernel memory: 1588k freed
[ 0.572710] Freeing unused kernel memory: 640k freed
[ 0.586045] udevd[40]: starting version 185
[ 0.590818] [drm] Initialized drm 1.1.0 20060810
[ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
[ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.595444] ACPI: Lid Switch [LID0]
[ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.595547] ACPI: Power Button [PWRB]
[ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.595639] ACPI: Sleep Button [SLPB]
[ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.595769] ACPI: Power Button [PWRF]
[ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.602545] i915 0000:00:02.0: setting latency timer to 64
[ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.749370] [drm] Driver supports precise vblank timestamp query.
[ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.117606] [drm] initialized overlay support
[ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
[ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 1.299886] Console: switching to colour dummy device 80x25
[ 1.301293] fbcon: inteldrmfb (fb0) is primary device
[ 1.430434] Console: switching to colour frame buffer device 160x50
[ 1.435865] fb0: inteldrmfb frame buffer device
[ 1.435868] drm: registered panic notifier
[ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
[ 1.456705] Switching to clocksource tsc
[ 1.821716] usbcore: registered new interface driver usbfs
[ 1.821753] usbcore: registered new interface driver hub
[ 1.826806] usbcore: registered new device driver usb
[ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
[ 1.842320] SCSI subsystem initialized
[ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.845354] hub 1-0:1.0: USB hub found
[ 1.845362] hub 1-0:1.0: 4 ports detected
[ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
[ 1.851193] libata version 3.00 loaded.
[ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.860280] hub 2-0:1.0: USB hub found
[ 1.860289] hub 2-0:1.0: 6 ports detected
[ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
[ 1.860750] hub 3-0:1.0: USB hub found
[ 1.860757] hub 3-0:1.0: 2 ports detected
[ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
[ 1.861172] hub 4-0:1.0: USB hub found
[ 1.861178] hub 4-0:1.0: 2 ports detected
[ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 1.861578] hub 5-0:1.0: USB hub found
[ 1.861585] hub 5-0:1.0: 2 ports detected
[ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
[ 1.862003] hub 6-0:1.0: USB hub found
[ 1.862010] hub 6-0:1.0: 2 ports detected
[ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 1.862411] hub 7-0:1.0: USB hub found
[ 1.862417] hub 7-0:1.0: 2 ports detected
[ 1.862917] ata_piix 0000:00:1f.1: version 2.13
[ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.869158] scsi0 : ata_piix
[ 1.874884] scsi1 : ata_piix
[ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
[ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
[ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.881780] scsi2 : ata_piix
[ 1.887944] scsi3 : ata_piix
[ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
[ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
[ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
[ 2.065117] ata1.00: configured for UDMA/66
[ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
[ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
[ 2.077869] ata3.00: configured for UDMA/133
[ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
[ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
[ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.184707] sda3: <bsd:bad subpartition - ignored
[ 2.184709] bad subpartition - ignored
[ 2.184710] bad subpartition - ignored
[ 2.184712] bad subpartition - ignored
[ 2.184713] >
[ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
[ 2.948381] usbcore: registered new interface driver usbhid
[ 2.948385] usbhid: USB HID core driver
[ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
[ 5.022890] udevd[198]: starting version 185
[ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
[ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
[ 5.562558] applesmc: init_smcreg() took 50 ms
[ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
[ 5.658889] lib80211: common routines for IEEE802.11 drivers
[ 5.658894] lib80211_crypt: registered algorithm 'NULL'
[ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
[ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
[ 5.924364] Disabling lock debugging due to kernel taint
[ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
[ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
[ 6.084085] Linux media interface: v0.10
[ 6.133183] iTCO_vendor_support: vendor-support=0
[ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
[ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
[ 6.164216] ACPI: Requesting acpi_cpufreq
[ 6.173706] Monitor-Mwait will be used to enter C-1 state
[ 6.178506] Monitor-Mwait will be used to enter C-2 state
[ 6.183424] Monitor-Mwait will be used to enter C-3 state
[ 6.183457] Marking TSC unstable due to TSC halts in idle
[ 6.183507] ACPI: acpi_idle registered with cpuidle
[ 6.183963] Switching to clocksource hpet
[ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.338786] Linux video capture interface: v2.00
[ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
[ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 6.429831] usbcore: registered new interface driver uvcvideo
[ 6.429835] USB Video Class driver (1.1.1)
[ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 6.587003] sky2: driver version 1.30
[ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
[ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
[ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
[ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.942266] appletouch: Geyser mode initialized.
[ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
[ 6.942768] usbcore: registered new interface driver appletouch
[ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
[ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
[ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
[ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 7.423516] usb 3-1: USB disconnect, device number 2
[ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[ 8.322211] Bluetooth: Core ver 2.16
[ 8.322655] NET: Registered protocol family 31
[ 8.322660] Bluetooth: HCI device and connection manager initialized
[ 8.322665] Bluetooth: HCI socket layer initialized
[ 8.322669] Bluetooth: L2CAP socket layer initialized
[ 8.322680] Bluetooth: SCO socket layer initialized
[ 8.359817] usbcore: registered new interface driver btusb
[ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
[ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.845740] Bluetooth: RFCOMM TTY layer initialized
[ 11.845751] Bluetooth: RFCOMM socket layer initialized
[ 11.845755] Bluetooth: RFCOMM ver 1.11
[ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
[ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
[ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 29.363373] wlan0: no IPv6 routers present
[ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
[ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
[ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 40.563473] wlan0: no IPv6 routers present
[ 45.535875] fuse init (API version 7.18)
[ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 70.867639] ISO 9660 Extensions: RRIP_1991A
[ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
[ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
/etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Skopje"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_GB.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=(applesmc wl uvcvideo)
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=stefan.local
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
ThanksArmy wrote:
This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
[repo-ck]
Server = http://repo-ck.com/$arch
(this has to go to the bottom of /etc/pacman.conf)
(use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
Edit: I will first try linux-lqx...
Last edited by exapplegeek (2012-06-26 18:33:31) -
Help to rewirte query for best performance
Hi All,
can you kindly help me to rewirte the below mentioned query for best performance. this is taking more than 20 min in our production server.
SELECT cp.name,mis.secondary_type U_NAME,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-161,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-154,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-154,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-147,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-147,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-140,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-140,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-133,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-133,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-126,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-126,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-119,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-119,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-112,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-112,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-105,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-105,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-98,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-98,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-91,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-91,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-84,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-84,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-77,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-77,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-70,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-70,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-63,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-63,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-56,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-56,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-49,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-49,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-42,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-42,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-35,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-35,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-28,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-28,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-21,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-21,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-14,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-14,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-7,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage
FROM mis_event_audit mis,USER u,com_pros cp where
mis.user_id=u.email_address and u.cp_id=cp.cp_id
and (mis.start_time between To_DATE(to_char(next_day (sysdate-161,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-7,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))
GROUP BY cp.name, mis.secondary_type;
Thanks,
krishHi, Krish,
Something like this will probably be faster, because it cuts out most of the function calls:
WITH got_cnt AS
SELECT cp.name
, mis.secondary_type AS u_name
, COUNT (mis.event_audit_id) AS cnt
, ( TRUNC (mis.start_time, 'IW')
- TRUNC (SYSDATE, 'IW')
) / 7 AS week_num
FROM mis_event_audit mis
JOIN user_table u ON mis.user_id = u.email_address -- USER is not a good table name
JOIN com_pros cp ON u.cp_id = cp.cp_id
WHERE mis.start_time >= TRUNC (SYSDATE, 'IW') - 161
AND mis.start_time < TRUNC (SYSDATE, 'IW')
GROUP BY cp.name
, mis.secondary_type
, TRUNC (mis.start_time, 'IW')
SELECT name
, secondary_type
, SUM (CASE WHEN week_num = 22 THEN cnt END) AS week_23
, SUM (CASE WHEN week_num = 21 THEN cnt END) AS week_22
, SUM (CASE WHEN week_num = 20 THEN cnt END) AS week_21
, SUM (CASE WHEN week_num = 0 THEN cnt END) AS week_1
FROM got_cnt
GROUP BY name
, secondary_type
;TRUNC (d, 'IW') is midnight on the last Monday before or equal to the DATE d. It does not depend on you NLS settings.
Whenever you're tempted to write an exprssion as complicated as
, COUNT ( CASE
WHEN ( mis.start_time BETWEEN TO_DATE ( TO_CHAR ( NEXT_DAY ( SYSDATE - 161
, 'monday'
, 'MM/DD/YYYY'
, 'MM/DD/YYYY'
AND TO_DATE ( TO_CHAR ( NEXT_DAY ( SYSDATE - 154
,'monday'
, 'MM/DD/YYYY'
, 'MM/DD/YYYY'
THEN mis.event_audit_id
END
) AS usageseek alternate ways. Oracle provides several handy functions, especially for manipulating DATEs. In particular "TO_DATE (TO_CHAR ...)" is almost never needed; think very carefully before doing a round-trip conversion like that.
Besides being more efficient, this will be easier to debug and maintain.
If you're using Oracle 11.1 (or higher), then you can also use SELECT ... PIVOT in the main query, but I doubt that will be any faster, and it might not be any simpler.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Simplify the problem as much as possible. For example, instead of posting a problem that covers the last 23 weeks, pretend that you're only interested in the last 3 weeks. You'll get a solution that's easy to adapt to any number of weeks.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}
For performance problems, there's another page of the forum FAQ {message:id=9360003}, but, before you start that process, let's get a cleaner query, without so many functions.
Edited by: Frank Kulash on Oct 2, 2012 11:50 AM
Changed week_num to be non-negative -
How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
== URL of affected sites ==
https://storefront.kenexa.com/lithia/cc/Home.ssThere should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
The menu item name changes to the browser UA you are presently using.
There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
You can just start trying IE versions (or the versions it says on the site) until it lets you in. -
Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
ThanksHi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy -
For best performance what's the size of an image to be stored in database?
Hi all,
can any one tell me..for best performance what's the size of an image to be stored in database?
is it <256kb or >256mb?
when i google we can store image as varbinary(max) and its limit upto 2GB..
Can anyone exlain it?
is it performance wise better..
thanx in advance..
luckyYour question does not seem apparently meaningful. If you need to store a 5MB image in the database, you store a 5MB image, not a 200 KB image or a 200 MB image. Business needs always trumph performance.
Not surprisingly, the larger the image the more resources it takes to read and write it.
What is a meaningful question is whether you should use the FILESTREAM feature or not. The cut-off limit here is usually given as 1MB. That is, if your images typically exceeds 1MB you should use FILESTREAM and access the data through Win32
API. If your images are generally below this size, you should stick to regular T-SQL.
Erland Sommarskog, SQL Server MVP, [email protected] -
What's the best specifications for 27" iMac in order to run Windows for best performance?
Hey there. I'm based in the UK and in the process of saving up for my first ever iMac (the new 27" model starting from £1699) after years of owning PC's and laptops, but now I'm finally fed up with Windows-based machines, they just don't cut it when it comes to performance and workload...etc.
I wanted to pick iMac users on the community to get clear advice on what the ideal specifications I should consider configuring my iMac when I finally get round to placing my order in March/April. I aim to run Windows 7/ or 8 via Parallels as I hear it's very good and from what video tutorials of it I've seen on YouTube it appears impressive to think the iMac can handle this at the same time as running Mountain Lion.
The ram I plan on upgrading myself manually, yes - I've sussed that one that very quickly due to Apple's extensive £400 fee to simply upgrade the iMac to 32GB, Crucial here I come!
...I digress a little. I'm torn between the Quad-core i5 and i7 as I don't want to get something that won't deliver best performance when it comes to running Windows in parallel (or coherence mode as I hear it's called). Below are some specs I've configured on 2 saved iMacs in my saved baskets.
CONFIGURATION #1
3.2GHz Quad-core Intel Core i5, Turbo Boost up to 3.6GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
1TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,019
CONFIGURATION #2
3.4GHz Quad-core Intel Core i7, Turbo Boost up to 3.9GHz
8GB 1600MHz DDR3 SDRAM - 2x4GB
3TB Fusion Drive
NVIDIA GeForce GTX 680MX 2GB GDDR5
Order total: £2,299
I'd appreciate anybody's time and patience on this little matter. Thank you.You don't need to go overboard on your hardware to run windows effectively. I bootcamp win7 on a late 2008 MacBook Pro with no issues. However, for an intense windows game I boot straight into windows. If you do not plan on gaming other than an occasional instance by your brother than this should be an acceptable solution.
One caveat is ram which you have already stated your are upgrading.
A general rule of thumb I live by is get the best you can afford now and it will prolong the need to upgrade in the future. That being said... The choices you have provided are all good choices. Preference on screen size will dictate your overall decision, of course. The need for i5 vs i7 CPU is normally not a factor for the majority of users. If you need to save some money then by all means choose the lesser configuration as it will handle windows fine.
One place you should consider the upgrade is the video card. Since you cannot upgrade this after purchase it is advisable to do this now. Also, the differences between the 675mx and the 680mx are far greater than what the naming implies.
Also, as mentioned in a previous post, the 3TB fusion drive can't bootcamp windows. There is a hack for the non-fusion version, but I have not heard of anyone getting that hack to work on the fusion drive. There are other creative options you can implement to make this work, however, it will require an additional investment in some 3rd party hardware. For a novice Mac user I would recommend the smaller fusion drive and external thunderbolt/USB storage as dictated by your needs in the future.
HTH -
What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem
My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC. My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service. This came with a new modem/router combo made by Cisco and is model DPC3825. Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service. Should I be setting the Cisco modem/router to Bridge mode or the TC? Should I have Shaw disable anything? Any insight is greatly appreciated.
Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode. -
Are my After Effects preferences set up for best performance?
I'm just wondering if my current settings are going to give me the best performance with what I have. Would you please look over these and see if I should change anything? Thank you.
I have a Windows 7 laptop. It has an Intel Core 2 Duo T6500 Mobile Processor @ 2.1 GHz and 3GB of RAM.
Here are my important preferences:
Previews
Display
Media & Disk Cache
Memory & Multiprocessing
I have a couple of specific questions pertaining to that last link. I'm confused what Minimum allocation per CPU does. And for my setup, would it be better to have longer RAM previews or Faster Rendering? Also, should Prevent DLL Address Space Fragmentation?
Thank you so much for your help! I greatly appreciate it!!If it is of any importance, my Page File is set to 4500 MB and a max of 6000.
-
Hi,
I'm hoping someone can help me to get the best quality DVD for home movies.
I have been editing and putting the movies to DVD for a number of years and the quality has been excellent. but over the last year something has changed and the quality of the final DVD is quite poor (pixalated)
I have tested different settings in both imovie HD and idvd but it hasn't made any difference so far.
I am using the following:
Sony HDR-HC9 handycam (Recording in HDV1080i)
imovie HD 6.0.3
iDVD 7.1
Thanks for any insight you can give me!Hi
As written - dust on lens - first thought
If You made a lot of DVDs in a row (>3 at a time) then there is a risk to burn out/harm the laser.
my list on DVD Quality - read or keep. It's long !
*DVD quality*
1. iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality *(movies + menus up to 120 min.)* - BEST
• Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
*Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to plyback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W -
Ideal settings for warm, high quality voice over?
Are there ideal settings to get a high quality voice over? I am using a good Samson mic, but need guidance with the settings? I don't suppose there is an existing preset that could be applied for this--I imagine I'll have to create one.
Thanks.There are plent of presets that will add ambience to the voice over, but to make it "warm" and not sound "recorded" isn't easy if at all possible using the presets in SB.
The best solution is to make sure the voice track is recorded at as close to "studio quality" as you can get before adding it.
"Egg crate" foam, carpet, fiberglass, mic baffling, all help to minimize background noise and that slight echo that can turn what would otherwise be a really good voice over into an amateurish sounding affair. -
Should I do this with Java Code or Stored Procs ? (for best performance)
Hi All,
I need to decide where should I implement my business logic, in Java code or Stored procs.
Here is the requirement :
- One Order has 70 products (Order_Table )
- Can be duplicate products, so I have to do summarize / grouping by product
- For every product, I have to check, if it is entitled for a Bonus product, then I have to Insert one to Bonus_Table.
- This is done when/after the transaction is SAVED (COMMIT)
The question is, which one has better PERFORMANCE :
(1) Create a rowsetIterator on the Order details (70 products) and call a stored procedure to do the logic for every single product (so that the Insert to Bonus_Table done in stored proc). means the stored proc will be called 70 times.
OR
(2) After the transaction is COMMITted, call the stored procs ONCE to do the logic for all the products at once.
OR
(3) I do all the logic with Java Code within ADF
Given the requirement above, which approach is most efficient / best performance ?
Thank you very much,
xtantoProblem with this is that you ask 100 people and you probably get 100 different answers. ;o)
Many would say that you push as much business logic into the database with your data; others might say you only put data in your database and your business logic is kept on the application server.
In reality your would probably have a mix of both and your decision would probably be influenced by your own background ...
Can't be more precise than that.
Grant -
How to connect multiple Xserve Raid for Best Performance
I like to get an idea how to connect multiple Xserve Raid to get the best performance for FCP to do multiple stream HD.
Again, for storage (and retrieval), FireWire 400 should be fast enough. If you are encoding video directly to the external drive, then FireWire 800 would probably be beneficial. But as long as the processing of the video is taking place on the fast internal SATA drive, and then you are storing files on the external drive, FireWire 400 should be fine.
Instead of speculating about whether it will work well or not, you need to set it up and try your typical work flow. That is the only way you will know for sure if performance is acceptable or not.
For Time Machine, you should use a single 1.5TB drive. It is likely that by the time your backup needs comes close to exceeding that space, you will be able to buy a 3TB (or larger) single drive for the same cost. Also, I would not trust a RAID where the interaction between the two drives is through two USB cables and a hub. If your primary storage drive fails, you need your backup to be something that is simple and reliable.
Oh, and there should be no problem with the adapter, if you already have it and it works.
Edit: If those two external drives came formatted for Windows, make sure you have use Disk Utility Partition tab to repartition and reformat the drive. When you select the drive in the Disk Utility sidebar, at the bottom of the screen +Partition Map Scheme+ should say *GUID Partition Table*. When you select the volume under the drive in the sidebar, Format should say *Mac OS Extended (Journaled)*. -
Vmware fusion/windows 7 for windows programming
I need to use a Mac and a Windows machine for teaching introductory CS classes - programming in java, web development, programming in visual basic and c#, etc.
I have a 17" MBP running vmwareand windows 7.
So far it runs the following perfectly: ms office applications, dr. java, webuilder (web editor), etc. As far as I have tested it so far it is running Visual Basic flawlessly but I've only run a couple of programs.
Does anyone here have EXTENSIVE experience running:
Java
MS C#
MS Visual Basic
NetBeans
Apache
PHP
and other similar environments
in a VMWare Fusion window with Windows 7 installed?
Much thanksYes. I'm running Visual Studio, MS SQL Server, Apache/iiS (with PHP and MySql) NetBeans, Eclipse, WebBuilder, ExpressionWeb4, and several other SDKs and IDEs. No problems over about two years. Windows 7 64 bit, Fusion.
-
Export settings for best quality for pages with letters etc.
Hi, I am trying to make video of a musical piece, featuring the score of the piece with pages turning following the progression of the music. I made the video in Adobe After Effects CS5 and exported it so it would be lossless. The video itself is a .mov file and looks great when I view it in Quicktime, but when I import it into FCE the quality goes down a bit. I don't know if FCE is handling the clips correctly or if it's just for making it quicker to view. Any suggestions on export settings from FCE for best quality of a video of this nature, so that the notes are clearly readable.
Thanks in advance
Ps. It has to be in a format suitable for Youtube.Under "Sequence" and in "Settings" and in the tab "Render Control" I have: Frame Rate: 100% Resolution: 100%.
If that is what you were referring to... but under the tab which is called RT and is located left of the timeline and left of the timecode. There I have checked : Safe RT, (Playback Video Quality) Dynamic, (Playback Frame Rate) High.
There might be a way to import the clip in better quality (so it doesn't downgrade the quality).
Was mostly trying to find out with the export but it might have something to do with this.
Thanks
Maybe you are looking for
-
Adobe Illustrator - menu freaking out
I recently installed Adobe Illustrator CS2 on my system, and for a while it worked fine. However about three weeks ago I launched it and the menus and submenus are all whacked out. For example: Instead of reading "File" it reads "$$$/_MBAR/Mn..." and
-
How to sign multiple jar files using the same certificate..?
hi, I want to run my application using Java Web Start.. i am using around 16 different jar files out of which around 13 are 3rd party component jars. I want to sign these jars using the same certifcate..., i am using the follwing code to sign the jar
-
Mapping measures to fact tables crashes (in OLAP Catalog)
I've got some problem with an olap catalog I create. Describing briefly my situation I may say that I have got a few measures (dimensioned with the same dimensions) but they load data from different fact tables. Using the CWM2 packages I try to creat
-
Hello, I have the following code on my Student class: public static List<Student> getAllStudents() { EntityManager em = SingletonDAO.getInstance().getEntityManager(); Query q = em.createQuery( "SELECT c FROM students c" ); List<Student> students = q.
-
My iMac crashes every time I play a video
Everything else works fine - I can surf the internet for hours, I can chat for an eternity - but as soon as I watch a DVD, or something on YouTube, or I watch a trailer, or even if I have the visualiser on in iTunes - I get a kernal panic, or the "yo