VMWare Fusion vs. Parallels Desktop for Mac + Captivate?

I'm likely to purchase a new MacBook Pro in the very near future, and wish to run Captivate on it. I've seen a few posts in this forum by folks using VMWare Fusion with mixed results. The posts are a couple of years old, so I'm curious to get the latest thoughts.
1. Which software -- VMW or Parallels -- would you recommend to run Captivate, and why?
2. Which version of Windows should I purchase?
3. What configuration do you recommend for the Mac: RAM, processor speed, hard drive speed (7200 vs 5400 rpm)?
Thanks.

HI,
I use VMWare Fusion on a souped up PC platform. I had been away from the MAC platform for over 10 years and had to allow myself time to get used to the new MAC OS interface. I found that switching between VMWare Fusion and the MAC OS was straightforward - after I got used to things. Since I don't want to invest in a new Adobe Technical Suite and a new Adobe CS4 Master Collection, I use VMWare Fusion on a daily basis.
I would much rather run everything on a real MAC, but since that alternative is not economic (nor are all features available) I am happy to run the MAC OS with my graphics card, and still have the full benefits of the graphics card when I'm running Photoshop and Illustrator from VMWare Fusion.

Similar Messages

VMWare Fusion and Parallels Desktop Benchmark Comparison

This is a quickie benchmark of VMWare Fusion and Parallels Desktop using Super PI, PC Mark 05, and Passmark.
VMWare Fusion 36932
Parallels Desktop 3094 Beta 2
Notes:
Both virtual machines were allocated with large 10+ GB virtual disks and 640MB of RAM. The VMWare CPU was configured with two processors. The Parallels CPU was configured with 1 (two is not available). VMWare reported the CPU as 1 physical, 2 logical processors running at 2.66 GHz while Parallels reported 1 physical, 1 logical processor running at 9.6 GHz (the combined speed of all four cores on the Mac Pro). The max observed CPU utilization in activity monitor when running under VMWare was 200% and max under Parallels was 173%.
I chose not to compare 1 VMWare CPU vs. 1 Parallels CPU. While Parallels does not support SMP or multithreaded processes on multiple processors the CPU utilization on the Mac went well above 1 core (173%). For this comparison, I wanted to see results of max processing based on what the two vendors have delivered, as opposed to benchmarking the underlying "virtual or hypervisor cpu" on a 1:1 basis. This explains why VMWare was 2x faster than Parallels on some CPU tests.
Both of these products are beta. VMWare is running in debug mode (can not be turned off in this beta).
Caveat emptor on these stats. This was an unscientific exercise to satisfy my curiosity. Some of the extraordinary differences are highlighted with <--.
Platform:
Mac Pro 2.66 GHz, 2GB RAM, Nvidia 7300GT
Disk 1 - OS X, 73GB Raptor
Disk 2 - dedicated disk where each virtual machine image was created separate from the OS or any OS-related virtual memory files.
VMWare and Parallels guest OS: Windows XP Professional, SP 2
Comparison Benchmrk
VMWare Fusion 36932 and Parallels Desktop 3094 Beta 2
Super PI Parallels VMWare
512K 8s 9s
1M 20s 21s
4M 1m 57s 2m 03s
PC Mark 05 Parallels VMWare
CPU Test Suite N/A N/A
Memory Test Suite N/A N/A
Graphics Test Suite N/A N/A
HDD Test Suite N/A N/A
HDD - XP Startup 5.0 MB/s 19.54 MB/s <--
Physics and 3D Test failed Test failed
Transparent Windows Test failed 69.99 Windows/s
3D - Pixel Shader Test failed Test failed
Web Page Rendering 3.58 Pages/s 2.34 Pages/s
File Decrypt 71.73 MB/s 67.05 MB/s
Graphics Memory - 64 Lines 179.92 FPS 111.73 FPS
HDD - General Usage 4.82 MB/s 42.01 MB/s <--
Multithread Test 1 / Audio Comp N/A N/A
Multithread Test 1 / Video Encoding Test failed Test failed
Multithread Test 2 / Text Edit 152.85 Pages/s 138.48 Pages/s
Multithread Test 2 / Image DeComp 5.91 MPixels/s 35.4 MPixels/s <--
Multithread Test 3 / File Comp 3.22 MB/s 6.03 MB/s
Multithread Test 3 / File Encrypt 19.0 MB/s 33.26 MB/s <--
Multithread Test 3 / HDD - Virus Scan 27.91 MB/s 25.49 MB/s
Multithread Test 3 / Mem Lat - Rnd 16MB 5.34 MAcc/s 6.63 MAcc/s
File Comp N/A N/A
File DeComp N/A N/A
File Encrypt N/A N/A
File Decrypt N/A N/A
Image DeComp N/A N/A
Audio Comp N/A N/A
Multithread Test 1 / File Comp N/A N/A
Multithread Test 1 / File Encrypt N/A N/A
Multithread Test 2 / File DeComp N/A N/A
Multithread Test 2 / File Decrypt N/A N/A
Multithread Test 2 / Audio DeComp N/A N/A
Multithread Test 2 / Image DeComp N/A N/A
Memory Read - 16 MB N/A N/A
Memory Read - 8 MB N/A N/A
Memory Read - 192 kB N/A N/A
Memory Read - 4 kB N/A N/A
Memory Write - 16 MB N/A N/A
Memory Write - 8 MB N/A N/A
Memory Write - 192 kB N/A N/A
Memory Write - 4 kB N/A N/A
Memory Copy - 16 MB N/A N/A
Memory Copy - 8 MB N/A N/A
Memory Copy - 192 kB N/A N/A
Memory Copy - 4 kB N/A N/A
Memory Lat - Rnd 16 MB N/A N/A
Memory Lat - Rnd 8 MB N/A N/A
Memory Lat - Rnd 192 kB N/A N/A
Memory Lat - Rnd 4 kB N/A N/A
Transparent Windows N/A N/A
Graphics Memory - 64 Lines N/A N/A
Graphics Memory - 128 Lines N/A N/A
WMV Video Playback N/A N/A
3D - Fill Rate Multi Texturing N/A N/A
3D - Polygon Throughput Multiple Lights N/A N/A
3D - Pixel Shader N/A N/A
3D - Vertex Shader N/A N/A
HDD - XP Startup N/A N/A
HDD - Application Loading N/A N/A
HDD - General Usage N/A N/A
HDD - Virus Scan N/A N/A
HDD - File Write N/A N/A
Processor Intel Core 2 9653 MHz Processor Unknown 2661 MHz
Physical / Logical CPUs "1 Physical, 1 Logical" "1 Physical, 2 Logical"
MultiCore 1 Processor Core Multicore 2 Processor Cores
HyperThreading N/A N/A
Graphics Card Generic VGA Generic VGA
Graphics Driver Parallels Video Driver VMWare SVGA II
Co-operative adapters No No
DirectX Version 9.0c 9.0c
System Memory 640 MB 640MB
Motherboard Manufacturer N/A Intel Corporation
Motherboard Model N/A 440BX Desktop Reference Platform
Operating System Microsoft Windows XP Microsoft Windows XP
Passmark Parallels VMWare
CPU - Integer Math (MOPS) 112.35 230.31 <--
CPU - Floating Point Math (MOPS) 280.46 588.33 <--
CPU - Find Prime Numbers (OPS) 446.37 676.99 <--
CPU - SSE/3DNow! (MMPS) 2118.56 4737.13 <--
CPU - Comp (KB/s) 2994.16 5952.34 <--
CPU - Encrypt (MB/s) 18.09 36.27 <--
CPU - Image Rotation (IRPS) 598.21 1184.41 <--
CPU - String Sorting (TPS) 2118.81 3672.59 <--
Graphics 2D - Lines (TPS) 220.71 25.15 <--
Graphics 2D - Rectangles (TPS) 189.74 61.8 <--
Graphics 2D - Shapes (TPS) 39.54 13.71 <--
Graphics 2D - Fonts and Text (OPS) 190.39 75.88 <--
Graphics 2D - GUI (OPS) 439.77 63.72 <--
Memory - Allocate Small Block (MB/s) 2533.83 2526.21
Memory - Read Cached (MB/s) 1960.5 1906.27
Memory - Read Uncached (MB/s) 1871.79 1826.08
Memory - Write (MB/s) 1687.81 1545.43
Memory - Large RAM (OPS) 60.99 46.37
Disk - Sequential Read (MB/s) 102.11 76.45 <--
Disk - Sequential Write (MB/s) 58.33 50.9
Disk - Rnd Seek + RW (MB/s) 51.4 40.4
CPU Mark 711.08 1432.72 <--
2D Graphics Mark 743.31 176.5 <--
Memory Mark 599.94 580.38
Disk Mark 766.11 606.7
PassMark Rating 557.27 637.35<br>

Thanks for posting these numbers - it's an interesting comparison.
I would expect the final VMWare fusion performance numbers to be quite a bit better than that of Parallels - they have almost a decade's worth of experience more than the Parallels folks in this arena, and a much larger development team to boot.
Once VMWare Fusion is released to the public, I think that you'll see a clearer distinction between the two products. VMWare will continue to appeal to the professional customer, with a more robust feature set and corporate-friendly features (and a correspondingly higher price tag); Parallels will fall more into the consumer/VirtualPC-replacement market. It will be interesting to see how Parallels will be affected when (and if) VMWare player is ported to OS X.
Interesting about the Parallels performance stats on a native partition - looks like almost enough reason to avoid the bootcamp partition approach altogether. Sharing a native windows installation with a VM in parallels is a pretty scary situation in any case, as the two environments have entirely different hardware configurations. Do-able, but there is some black magic involved (if you want to see an example of what I mean, try to move a windows installation from one machine to another w/different hardware sometime - it ain't pretty); I wouldn't try this in a production scheme unless I had REALLY good backups.

Keyboard error with '@' when in WindowsXP (using Parallels Desktop for Mac)

When I go to type '@' when in WindowsXP (using Parallels Desktop for Mac) the symbol ' " ' appears; I have to type ' " ' to achieve the ' @ ' symbols. Can anyone help?

Try switching the keyboard layout in XP to other countries. Maybe US from UK.

Parallels Desktop for Mac

I am purchasing a new Mac-Mini and want to run Parallels Desktop for Mac. I previously was using Virual PC for the Mac. Does anyone know whether I can use the windows professional onthe Virual disk to load windows in the Parallel program?

The short answer is technically yes, but not easily (depending on your threshold of "easily") and more headache than it may be worth. Check out the following threads (one from the Parallels support forums, the other from elsewhere in Apple Discussions that offer input and a solution. For the steps in the post in Apple Discussions you do need a copy of Windows running somewhere for this to work.
Thread from Parallels
Thread from Apple Discussions
Also - although doing this is technically possible, I'm not sure you wouldn't be in violation of the Virtual PC EULA in doing so.
Intel Mini 1.66 GHz, Mac Pro 2.66 GHz Mac OS X (10.4.7)
Vista RC2 and XP running under Parallels

Using a mac with Parallels Desktop for Mac License

Hi!
Is it really possible to use Parallels Desktop for Mac Licence that allows us to program and test apps and use all apps of windows in a mac?
Thanks.

For details on Parallels capabilities you'll need to check with its authors, but in general you can run Visual Studio and write and test Windows Store apps on Windows 8.1 running in parallels

Using SBO client under Mac with Parallels Desktop for Mac

A client uses Mac for one of the users, and ask me if it is posible use SBO 2005 SP01 with Parallels Desktop for Mac. Any experiences?

Hi Hector,
You may also want to check out VirtualPC for MAC. There's also a demo you can check out.
http://www.microsoft.com/mac/products/virtualpc/virtualpc.aspx?pid=virtu
Heather

VMware Fusion vs Parallels Desktop 3.0

i want to run Windows XP or Windows Vista on my mac.
which among VMware Fusion and Parallels would be a much better program/software to buy?
what are the pros & cons of each?
should i buy now or would waiting for Leopard's release (with a new Boot Camp version) be much better?
thanks.

I have Parallels installed on my wife's MacBook and I have Fusion installed on mine. I think if you are using it in a home environment, Parallels would be better as it's snazzier in it's implementation. But for a work type environment, I would recommend Fusion. VMWare has lots of experience with virtualization, and if you have a Linux/Windows VM that is already built and configured, it would be quite easy to just port it over to Fusion to run.
Fusion is probably playing a bit of catch up with Parallels but eventually it will get there, and I expect them to overtake Parallels.
Both software has free trials, and I would recommend that you download both and try them out to see which one you would prefer.

If i buy VMware fusion or Parallels desktop, i need a version of windows?

do i need windows with parallels or VMware?
a lot of thanks

nicholasfromcorreggio wrote:
do i need windows with parallels or VMware?
a lot of thanks
You don't need Windows if you want to run a different OS as your "guest". You can download many different flavors of Linux for free, and most of them will run in Parallels or VMWare Fusion... If you want to run Windows though, you will need a copy of that OS to install in the virtual machine of your choice...

Using Parallels Desktop for Mac

I have a Mac 10.5.8. I also am running Leopard. I want to be able to run Windows XP. I'm scared of getting a virus using Windows. So my question is this. Can I partition off space on my Mac, using Windows with Parallel 5? So if i get a virus that I can't get rid of, I can just rid myself of the partition. Is this possible?
Thank You!

Windows viruses will affect Windows, not the Mac. Parallels creates a pseudo-disk by creating a sparsebundle disc image. The disc image is independent of OS X in the sense that a virus infecting the Windows system on the disc image cannot migrate to the Mac anymore than it could if you had a separate PC.
That said you can use Boot Camp Assistant to create a Windows partition on your hard drive then install Windows on that partition. You can then create a Parallels virtual machine that uses the Windows installation on the Boot Camp partition.
For clarification 10.5.8 is a version of Leopard, not a Mac model.

Opinions needed on VMware Fusion or Windows programs on Mac

I am new to the Mac Family. My son is going to college this fall for Computer Animation, so I thought I would treat him and the family to a new computer system. After much research, the Mac Pro was the computer to get. I have a lot of software and downloads that are still PC. I was told that VMware Fusion is a good support system for Windows on Macs. Has anyone used this product and has anyone used it with Windows Vista?
P.S. I got my Pro Mac with 3.00 GHZ Dual Core, 4 GB Memory, and 500 GB Serial ATA 3Gb/s hard drive.
P.S.S. If I go with a conversion system (VMware Fusion), do I need a good anti-virus program (Norton/McAfee, etc.), or does that conflict with Leopard os X?

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak 2 or Vista. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, or Vista Ultimate. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, or Vista Ultimate. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
If you install Vista you must use Vista Business or Ultimate with the virtual machine software. You will need Windows anti-virus software. It isn't required for OS X.

How many licenses for Windows 7 via both Boot Camp and either VMware Fusion or Parallels on the same MacBook?

This concerns a white MacBook running OS X 10.5.8 Leopard.
If I install Windows 7 on my MacBook with Boot Camp, and then use either VMware Fusion or Parallels to access that Boot Camp partition, will I need to buy two Windows licenses from Microsoft?
I had not anticipated this, but when calling VMware and Parallels to check out the tech support services of the two companies, the person at VMware mentioned that I would need two licenses. When I called Parallels, I then asked the person at that company whether two Windows licenses would be needed. That person told me that only one license would be necessary.
I then called Microsoft. The representative there told me that my question could not be answered by Microsoft because that company does not provide support for users installing Windows on Apple computers.
After that, I called Apple. The Apple representative was not familiar with this type of issue. She mentioned the possibility that the VMware Fusion and Parallels products might be different, and that that might be why using the former would involve two licenses and using the latter would involve only one license.
Has anyone had experience with installing Windows 7 via Boot Camp, and then accessing that Windows 7 installation from VMware Fusion or Parallels? If so, did you have to buy two Windows licenses?

One license. You may have to re-register Windows online when you start it up in Parallels because Windows sees that it is now running on new hardware (virtualized) and thinks it has been installed on a new computer. If the online re-registration does not work, just call the registration number and go through the automated registration process. Once re-registered then use Windows from Parallels. If you are also installing MS Office in Windows you will need to go through the same process again for registering Office.
The process is automated, simple, and free. You have made the process more complicated than it is by calling Apple, Parallels, and Microsoft when there is an automated MS registration number to call.

How do you install Windows 7 OEM on iMac using Parallels 8 Desktop for Mac

I am trying to install windows 7 on my iMac using Parallels 8 desktop for mac so i can use microsoft office 2010. i know there is a mac version that is the same, but my college professor wants me to use the windows version becaus they have diferrent xml coding. and trying to save money i got the oem version of windows 7. is there anything special that i need to do for installing windows 7 oem onto my imac using parallels?

Geo94 wrote:
I am trying to install windows 7 on my iMac using Parallels 8 desktop for mac so i can use microsoft office 2010. i know there is a mac version that is the same, but my college professor wants me to use the windows version becaus they have diferrent xml coding.
Utter nonsense.
trying to save money i got the oem version of windows 7. is there anything special that i need to do for installing windows 7 oem onto my imac using parallels?
Just use the defaults. Windows 7 is very slow and really RAM-hungry. You will need 8 GB of RAM on your Mac because Windows 7 needs 2 GB all by itself. Even with that, it runs twice as slow as Windows XP.
If you've already spent money, there isn't much you can do at this point. I suggest using Apple Pages and, when you are ready to submit something to your professor, export it as a Word document and then re-save that Word document as a Word XML doc. I don't know why Pages doesn't export in docx format. It is built into the operating system. I even have a little utility that will save your clipboard directly to docx. You can download a fully-functional demo from: http://www.etresoft.com/pastefiler
There are many other utilities that can do the same, including Office 2011 itself. I prefer Pages because it supports modern OS X technologies and is much faster and easier to use than Word, but Pages only exports to DOC, not DOCX. Word is better if you are doing really sophisticated document, but it costs a fair amount money.
Disclaimer: I may receive some form of compensation, financial or otherwise, from my link.

Running Autodesk Inventor using Fusion or Parallel on Intel Mac

I need to be able to run Autodesk Inventor and DO NOT want to purchase a PC to do it. If I use VMware Fusion or Parallel on an Intel Mac will it operate without any glitches. Our tech guy said that the keyboard shortcuts are not going to be the same, is that true and are there any other issues I will come up against (i.e. system speed, ram, video card etc.)

Hi and welcome to Discussions,
your signature says that you are using PPC-Macs (Power Mac; Powerbook).
Parallels and Fusion only work on Intel-Macs.
Same for BootCamp.
So, if your sig is still uptodate, you are out of luck.
Your tech guy might refer to the fact, that Apples keyboards have a slightly different layout than the usual PC keyboard.
See here for a comparison: http://docs.info.apple.com/article.html?artnum=304270
On Intel-Macs some guys round here and in the BootCamp Forum have reported success in running Autodesk software on their Intel-Macs.
Please do a search for these threads.
Regards
Stefan

Each time I use a USB,IPHOTO,DVD or VMware Fusion connection the desktop mouse pointer freezes regards Model Name:       Model Identifier:MacBookPro10.6.8, 2   Processor Name:Intel Core i7   Processor Speed:2 GHz   Number of ProcesJohn

Each time I use a USB,IPHOTO,DVD or VMware Fusion connection the desktop mouse pointer freezes regards Model Name: Regards John
Model Identifier:MacBookPro10.6.8, 2
Model Name: MacBook Pro 10.6.8
Model Identifier: MacBookPro 8.2
Processor Name: Intel Core i7
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Serial Number (system): C2*******F8V
Hardware UUID: *****
Sudden Motion Sensor:
State: En
<Edited By Host>

Hi Allan,
Thank you for your early response, I eventually managed to unZip the requested download, each time I tried the computer froze.
EtreCheck version: 1.9.12 (48)
Report generated 19 July 2014 19:27:23 GMT+01:00
Hardware Information:
     MacBook Pro (15-inch, Early 2011) (Verified)
     MacBook Pro - model: MacBookPro8,2
     1 2 GHz Intel Core i7 CPU: 4 cores
     4 GB RAM
Video Information:
     AMD Radeon HD 6490M - VRAM: 256 MB
     Intel HD Graphics 3000 - VRAM: 384 MB
          Color LCD 1440 x 900
System Software:
     Mac OS X 10.6.8 (10K549) - Uptime: 0 days 0:4:34
Disk Information:
     Hitachi HTS545050B9A302 disk0 : (465.76 GB)
          - (disk0s1) : 200 MB
          Macintosh HD (disk0s2) / : 465.44 GB (58.8 GB free)
     MATSHITADVD-R   UJ-898
USB Information:
     Apple Inc. FaceTime HD Camera (Built-in)
     Apple Inc. BRCM2070 Hub
          Apple Inc. Bluetooth USB Host Controller
     Apple Inc. Apple Internal Keyboard / Trackpad
     Apple Computer, Inc. IR Receiver
Thunderbolt Information:
     Apple, Inc. MacBook Pro
Kernel Extensions:
          com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
          com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
          com.ZTE.driver.ZTEUSBCDCACMData (1.3.35) Support
          com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.35) Support
          com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
          com.novatelwireless.driver.3G (3.0.13) Support
          com.novatelwireless.driver.3GData (3.0.13) Support
          com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
          com.option.driver.Option72 (2.15.0) Support
          com.option.driver.OptionHS (3.26.0) Support
          com.option.driver.OptionMSD (1.21.0) Support
          com.option.driver.OptionQC (1.11.0) Support
          com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
          com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
          com.tomtom.driver.UsbEthernetGadget (1.0.0d1) Support
          com.vmware.kext.vmci (3.1.2) Support
          com.vmware.kext.vmioplug (3.1.2) Support
          com.vmware.kext.vmnet (3.1.2) Support
          com.vmware.kext.vmx86 (3.1.2) Support
          com.vodafone.driver (3.0.9) Support
          com.vodafone.driver.Data (3.0.9) Support
          com.vodafone.driver.DisableAutoInstall (2.0.6) Support
          com.zte.driver.cdc_ecm_qmi (1.0.26) Support
          com.zte.driver.cdc_usb_bus (1.0.26) Support
          de.novamedia.driver.NMSamsung (0.0.2) Support
          de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
          de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
          de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
          de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
          net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
          net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
     HWNetMgr: Path: /Library/StartupItems/HWNetMgr
     HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Problem System Launch Daemons:
          de.novamedia.nmnetmgrd.plist Support
Launch Daemons:
          com.adobe.fpsaud.plist Support
          com.citrixonline.GoToMyPC.CommAgent.plist Support
          com.trusteer.rooks.rooksd.plist Support
          com.vmware.launchd.vmware.plist Support
          com.zeobit.MacKeeper.AntiVirus.plist Support
Launch Agents:
          com.citrixonline.GoToMyPC.LaunchAgent.plist Support
          com.conduit.loader.agent.plist Support
          com.epson.ews.launcher.plist Support
          com.hp.devicemonitor.plist Support
          com.hp.messagecenter.launcher.plist Support
          com.trusteer.rapport.rapportd.plist Support
          de.novamedia.VodafoneDeviceObserver.plist Support
User Launch Agents:
          com.adobe.ARM.[...].plist Support
          com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          com.google.keystone.agent.plist Support
          com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
     VMCStatusMenu
     Dropbox
     Vodafone Mobile Broadband
     HP Product Research
Internet Plug-ins:
     Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
     FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
     JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
     AdobePDFViewerNPAPI: Version: 10.1.7 Support
     Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
     AdobePDFViewer: Version: 10.1.7 Support
     QuickTime Plugin: Version: 7.6.6
     Google Earth Web Plug-in: Version: 7.1 Support
     GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
     Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
     iPhotoPhotocast: Version: 7.0 - SDK 10.7
iTunes Plug-ins:
     Quartz Composer Visualizer: Version: 1.2
3rd Party Preference Panes:
     Flash Player Support
     Flip4Mac WMV Support
     GoToMyPC Preferences Support
     Trusteer Endpoint Protection Support
Top Processes by CPU:
         18%     mdworker
          7%     WindowServer
          2%     Dock
          2%     Vodafone Mobile Broadband
          1%     SystemUIServer
Top Processes by Memory:
     242 MB     AntiVirus
     78 MB     Dropbox
     53 MB     WindowServer
     45 MB     rapportd
     37 MB     MacKeeper Helper
Virtual Memory Information:
     2.00 GB     Free RAM
     864 MB     Active RAM
     182 MB     Inactive RAM
     995 MB     Wired RAM
     164 MB     Page-ins
     0 B     Page-outs
I appreciate your assistance in this problem
Regards
John (omegajon)

Is snow lepoard 10.6.8 compatiable with aol desktop for mac?

I updated my aol desktop for mac to the 1.7.763 version and Im running snow leopard 10.6.8 on my imac.Im now haveing all kinds of issues useing the aol desktop for mac.Mail wont open and sometimes it does, web pages dont load, freeze ups in the mail part of aol. I s any one else haveing this issue? Some tec from aol told me its not comptiable. I could not find anywhere it says it isnt.I tried resetting Safari and it worked for awhile than started to act up again.I dont see why I should have to upgrade to mountain lion to have to be able to use the aol desktop.Im quite happy with snow leopard and Ive seen some bad reviews with mountain lion. Are there any fixes or Im wondering if apple is going to resolve this.Very frustrateing. Thanks for any ones time. Darlene
Preferences
1
2
3
4
5
6
7
8
9
0
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
Return
capslock
a
s
d
f
g
h
j
k
l
shift
`
z
x
c
v
b
n
m
shift
English
alt
alt
Preferences

Yes it will work. The iPad Air 2 is the latest and most up to date iPad and you can sync it with Snow Leopard 10.6.8.
Apple ID (required for some features)
Internet access9
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 8; Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes (free download from www.itunes.com/download)
https://www.apple.com/ipad-air-2/specs/

VMWare Fusion vs. Parallels Desktop for Mac + Captivate?

Similar Messages

Maybe you are looking for