VMware host and server reboots after restart of VM (Windows 2008)

Hello folks,
I have a quick question. When I restart virtual machine running Windows 2008 server my server and VMware are restarting as well.
Can you please give me a direction for further search or suggest any possible solution?

Hello,
I've just been through the IBM interoperability matrix and came across this statement:
Hyper-V on x64 based systems is supported with the following guest OS: Windows 2003 32bit, Windows 2003 64bit, Windows 2008 32bit, Windows 2008 64bit.
Clustering of guest OS is not supported at this time. When using Emulex HBAs with Hyper-V please select the settings mentioned in the Host Attachment section of SVC Info Center
http://publib.boulder.ibm.com/infocenter/svc/ic/index.jsp
Thanks

Similar Messages

Thunderbird is deleting my emails of my profile and server minutes after I receive them

Thunderbird is deleting my emails of my profile and server minutes after I receive them. This happens even after I remove profile and re-install it.

Please do not use capitals as this implies you are shouting. I understand you are very frustrated, but shouting at those who are trying to help is not the answer.
Please offer some info so to understand your situation and setup.
'''1. '''Tools -> Account Settings -> Server Settings for mail account
When I delete a message has choices for:
* Move it to the Trash folder
* Mark it as deleted
* Remove it immediately.
which one is selected?
'''2'''.re: Clean up ("Expunge") Inbox on Exit
Is this selected?
'''3.'''re: "Empty Trash on Exit"
Is this selected?
'''4 '''Please open the Activity Manager
Tools > Activity Manager
What does it say in the Activity Manager ?
Is there any mention of deleting or moving to Deleted or Trash folder?
'''5.''' re:the emails that disappear:
Are they disappearing from:
* only one folder eg: Inbox ?
* any folder eg:: Sent, inbox, any folder you created etc?
Is there any folder they are not being deleted from?
'''6.''' Do you synchronize all subscribed folders or only a select few?
Do the emails disappear from:
* only synchronized subscribed folders
* only subscribed (but not synchronized) folders
* disappear from both regardless if synchronized or not
'''7. '''If you go into 'offline' mode, does the Activity Manager show any deleting occuring.?
'''8. '''In 'offline' mode, can you copy emails from a synchronisd folder into a suitably named folder in 'Local Folders'. Emails stored in Local Folders should be not effected by IMAP.
Please report back saying if emails stored in 'Local Folders' also get deleted or not.

How to determine server host and server port

Dear Experts.
How to determine server host and server port where Webdynpro application is working.
If the url is following
http://sapr3dm:50500/webdynpro/dispatcher/local/ForecastingPowerProject2/NewObjectConnection?SAPtestId=6
How to receive sapr3dm and 50500

Hi,
May be of use
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getServerName();
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getServerPort();
Regards
Ayyapparaj

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

Automate the database and forms / reports services to start on windows 2008 server R2 startup

Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:

Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

Server reboot after Event 1001, BugCheck on virtual machine

Hi,
We have a virtual machine server 2008 R2 hoe does reboots after a bugcheck.
The notification is :
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000101 (0x0000000000000030, 0x0000000000000000, 0xfffff880009b8180, 0x0000000000000001). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 061214-139312-01.
If i look at the console, then i see a BSOD screen
Can you help determine the cause of this failure ?
Best regards
Paul

Hi Paul,
It is recommended to run hardware diagnostics on the server to check if it is a hardware issue. The Windows built-in hardware diagnostic tools include CHKDSK and Windows Memory Diagnostic tool.
Chkdsk
http://technet.microsoft.com/en-us/library/bb491051.aspx
Windows Memory Diagnostics Tool in Windows Server 2008
http://www.itechtalk.com/thread2230.html
In additional, please refer to the article below to troubleshoot the issue:
Stop error message on a Windows Server 2008 R2-based computer that has the Hyper-V role installed and that uses one or more Intel CPUs that are code-named Nehalem: "0x00000101 - CLOCK_WATCHDOG_TIMEOUT"
http://support.microsoft.com/kb/975530
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

IPhone keeps rebooting after restart

Whenever I try to shut off and restart my IPhone it stays on the apple logo start up screen for about 5 minutes then goes to the screen to slide to unlock and freezes so I cannot unlock the phone. Then after about 3 minutes it goes to a black screen with the round waiting symbol on it, then back to the slide to unlock screen again, then black waiting screen, then it reboots itself again and starts the process over. The first time this happened it went through the cycle 3 times. The next time I waited 2 hours and for it to work and finally went into itunes to restore it. I try holding down home and on/off buttons and it reboots it again, but nothing happens. So today my phone just restarted on its own when I was in Safari and after about 20 minutes I took it to the Verizon store to see what they can do about it. First they said to contact Apple support, then a guy held down the home and on/off button and then it unfroze. I told him I already tried that 2 or 3 times today since this problem started, but he didn't care because he was too mad he missed out on a sale to "help" me. So the phone works now, but I know if I just try to restart it again the phone will just go through the rebooting problem all over again. I have not dropped the phone and I thought restoring the phone would fix it if it was a software glitch, so I'm thinking it may be a hardware issue so what should I do if Verizon does not want to help me? I've had it less than a year so I would like to get it fixed before the warrently runs out.

If no change after restoring the iPhone as a new iPhone or not from the backup, call AppleCare or make an appointment at an Apple store if there is one nearby.
Verizon doesn't exchange iPhones under Apple's warranty if required, Apple does.

Mac mini server problem after restart. Desperate scream out for help

Hi there....after restarting my mac mini server I have a white screen with an apple logo in the middle. Anybody here to find help with?

Mac OS X: Gray screen appears during startup

Skype lockup (and continuous lockup after restarti...

so when i call my friend, my skype locks up, and after restarting, it continues to do said lockup, if i message her it locks up as well, but not as bad (i can sign out and back in, ittle be fine) what is the exact cause for this? (also im running windows 7 home premium, internet explorer is updated, flash is updated)

too much hastle, but did delete alot of malware, which helped somewhat (void as well, doesnt help)

How to create more than one connections between my host and server

Hi,
I want to create multiple connections(at least, two connections) between my host and the server.
And use them to transfer data at the same time.
Could you help me, and could you give me a sample code example?
^-^
Thank you very much

import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.net.*;
import java.io.*;
import java.nio.channels.*;
import javax.swing.*;
   This program shows how to interrupt a socket channel.
public class InterruptibleSocketTest
   public static void main(String[] args)
      JFrame frame = new InterruptibleSocketFrame();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.setVisible(true);
class InterruptibleSocketFrame extends JFrame
   public InterruptibleSocketFrame()
      setSize(WIDTH, HEIGHT);
      setTitle("InterruptibleSocketTest");
      JPanel northPanel = new JPanel();
      add(northPanel, BorderLayout.NORTH);
      messages = new JTextArea();
      add(new JScrollPane(messages));
      busyBox = new JCheckBox("Busy");
      northPanel.add(busyBox);
      startButton = new JButton("Start");
      northPanel.add(startButton);
      startButton.addActionListener(new
         ActionListener()
            public void actionPerformed(ActionEvent event)
//               startButton.setEnabled(false);
               cancelButton.setEnabled(true);
               connectThread = new Thread(new
                  Runnable()
                     public void run()
                        connect();
               connectThread.start();
      cancelButton = new JButton("Cancel");
      cancelButton.setEnabled(false);
      northPanel.add(cancelButton);
      cancelButton.addActionListener(new
         ActionListener()
            public void actionPerformed(ActionEvent event)
               connectThread.interrupt();
               startButton.setEnabled(true);
               cancelButton.setEnabled(false);
        new Thread(new TestServer(Port)).start();
      Connects to the test server.
   public void connect()
       new Thread(new Client(Port)).start();
//       Port++;
   class Client implements Runnable{
           Client(int port){
               this.port = port;
           private Scanner in;
       private int port;
        public void run() {
                try
                   SocketChannel channel = SocketChannel.open(new InetSocketAddress("localhost", port));
                   try
                      in = new Scanner(channel);
                      while (true)
                           try{
                              if (in.hasNextLine())
                                 String line = in.nextLine();
                                 System.out.println(line + " " + channel);
     //                            messages.append(line);
     //                            messages.append("\n");
                              else Thread.sleep(100);
                           }catch(Exception e){
                                e.printStackTrace();
                   }finally
                        messages.append("Socket closed\n" + channel);
                      channel.close();
                catch (IOException e)
                   messages.append("\nInterruptibleSocketTest.connect: " + e);
      A multithreaded server that listens to port 8189 and sends random numbers to the client.
   class TestServer implements Runnable
          ServerSocket s;
          private int port;
          TestServer(int port){
              this.port = port;
              try {
               s = new ServerSocket(port);
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
      public void run()
         try
            int i = 1;
            while (true)
               Socket incoming = s.accept();
               Runnable r = new RandomNumberHandler(incoming);
               Thread t = new Thread(r);
               t.start();
         catch (IOException e)
            messages.append("\nTestServer.run: " + e);
      This class handles the client input for one server socket connection.
   class RandomNumberHandler implements Runnable
         Constructs a handler.
         @param i the incoming socket
      public RandomNumberHandler(Socket i)
         incoming = i;
      public void run()
         try
              int i = 0;
            OutputStream outStream = incoming.getOutputStream();
            PrintWriter out = new PrintWriter(outStream, true /* autoFlush */);
            while (true)
               out.println(i);
               i++;
               Thread.sleep(100);
         catch (IOException e)
            messages.append("\nRandomNumberHandler.run: " + e);
         catch (InterruptedException e)
            messages.append("\nRandomNumberHandler.run: " + e);
      private Socket incoming;
   private JButton startButton;
   private JButton cancelButton;
   private JCheckBox busyBox;
   private JTextArea messages;
   private TestServer server;
   private Thread connectThread;
   public static final int WIDTH = 300;
   public static final int HEIGHT = 300;
   public static int Port = 8848;

Server 2012 Kms Host and Server 2008 r2 client.

I have deployed a Server 2012 Kms host.
Windows 7, and 8 are activating just fine, and Office 2010 is working.
The issue I'm having is activating Server 2008 and Server 2008 r2.
It seems I have missed a step that would allow me to activate those clients.
Can someone please guide me as to what possibly needs to be done to allow these clients to activate?

Hi,
The following steps are needed to set up Volume Activation Services in a Windows Server 2012 test lab:
1. Step 1: Set up the base test lab configuration
2. Step 2: Install the Volume Activation Services server role
3. Step 3: Configure Active Directory-based Activation
4. Step 4: Verify that Active Directory-based Activation works
5. Step 5: Configure Key Management Services (KMS)
6. Step 6: Verify that KMS volume activation works
At same time KMS volume activation requires
a minimum threshold of 25 computers before activation quests will be processed. The verification process described here will increment the activation count each time a client computer contacts the KMS host. However, unless the activation threshold
is reached, the verification will take the form of an error message rather than a confirmation message.
The related KB:
Test Lab Guide: Demonstrate Volume Activation Services
http://technet.microsoft.com/en-us/library/hh831794.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

All gmail and Message remove after restart device

Hi All,
Any one know why my gmail and Message remove after i restarted devices??
I check in mobile and other information but i not get any detail yet.So i hope is device problem so any one know how to backup this all data??

Hi shahumang8,
When you restart your BlackBerry Z10, do you have to re-integrate your Gmail account or do your messages ever re-appear?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Lumia 800 Date And Time Incorrect After Restart

I purchased a Lumia 800 in the UK in December 2012 (SIM FREE) and I have a problem when I switch it on where it resets the date to anything like 1980 or 2084(?) and the time to a random setting. I have looked for a solution but cannot find one that works. Will this issue be fixed with the Windows Phone 7.8 update that's coming? When the date is wildly out it affects the functionality of the phone i.e. sync issues. I have tried restarting a Lumia 610 and this problem does not occur. Are all Lumia 800s the same i.e. (hardware revision)? I thought that if I returned to the retailer a new version my fix the issue.

I'm facing the same issue with my Lumia 800, or rather was. Here's my situation: initially the handset would keep resetting the date to 1980 (and a random time) each time I switched it off and on again. This happened whether I was connected to wifi/mobile data or not. I've recently done a reset of the handset (using the option from within Settings) and this has partially resolved the issue.
Now if I'm connected to wifi/data when I switch the phone off/on the date resets to August 2013. If, however, I'm not connected to wifi/mobile data when I switch the phone off/on the date/time remain unaffected. So this would suggest that it's not an internal battery issue which is what I first suspected. As it stands now then the best option is to reset the handset and then ensure you turn off wifi and data/internet before switching the handset off/on. Still annoying to say the least, but partial workaround.
Furthermore there is no automatic date/time setting to toggle on/off under the date/time settings (removed by the last update I gather?), just an option to toggle between 12hr or 24hr clock. My handset is on the latest OS version and firmware.
Any idea if Nokia/Windows are working on this issue? Just doing a Google serach for this issue and it appears that a fair few other Lumia 800 users are facing the same problem.
Thanks.

Event IDs 136 and 137 0x80000000000000 in System Log on Windows 2008 R2 Server, Exchange 2010 in Cluster

Hi,
I'm having an issue with one of my exchange 2010 Servers. We had a power outage and upon recovery, I cannot start Services Net.Pipe Listener Adapter and Net.Tcp Listener Adapter (And thus cannot Start IIS and provide Exchange Client Services.) This is a
physical server (Not VMWare or Hyper-V)
The System event log has lots of Event 136's and 137s on Ntfs with the keyword - 0x80000000000000 - The General Messages are: The default transaction resource manager on volume C: encountered an error while starting and its metadata was
reset. The data contains the error code.
and
The default transaction resource manager on volume OS encountered a non-retryable error and could not start. The data contains the error code.
XML Output as follows:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="32772">136</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315532</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>C:</Data>
<Binary>1C00040002003000020000008800048000000000060019C000000000000000000000000000000000060019C0</Binary>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">137</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315531</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>OS</Data>
<Binary>1C0004000200300002000000890004C000000000020100C000000000000000000000000000000000020100C0</Binary>
</EventData>
</Event>
When I attempt to start the services - I get the following errors:
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
I have tried the "fsutil resource setautoreset true" fix without success.
Any ideas or direction would be much appreciated. Restoring this server will be extremely difficult.
Thanks!

We can close this question.
From an elevated prompt, I ran 'fsutil resource setautoreset true' and attempted to remove the files with .blf and regtrans-ms file extensions from C:\Windows\System32\config\TxR. but these files were locked by system processes. (They are also
tagged with the hidden file attrib so you may not see them at first)
So, I booted the system with a Windows 2008 R2 Install Disk, selected repair OS and selected the command prompt. I then performed a chkdsk /f c: and selected "Y" to unmount the drive. It made some repairs.
With the system booted from the install disk, and chkdsk executed, the locks were freed and I was able to delete the files from C:\Windows\System32\config\TxR.
Once the system rebooted, the services came back fine and everything was back to normal.

VMware host and server reboots after restart of VM (Windows 2008)

Similar Messages

Maybe you are looking for