Vmware mouse driver is not loaded automatically in OL 5.x version by defau.

I have two questions on OL 5.8.
question1:
=======
I could see vmware video driver,bundled,/usr/lib64/xorg/modules/drivers/vmware_drv.so, but no vmware mouse driver is bundled on OL 5.8.
By the way, On OL 6.2, I could see both vmware video and mouse drivers.
Question 2
=======
Why no version information is shown from the following command?
# modinfo /usr/lib/xorg/modules/drivers/vmware_drv.so
Edited by: changhai on Mar 7, 2012 4:49 PM
Edited by: changhai on Mar 7, 2012 4:49 PM

Hello, Avi,
Sorry, let me clarify it again.
On RHEL 5.8/OL 5.8 , I could see vmware_drv and vmmouse_drv files. but on OL 5.8, by default, vmmouse_drv.so is not loaded.
Result on RHEL 5.8
============
[root@pek2-lab-08-dhcp158 ~]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.8 (Tikanga)
Kernel \r on an \m
[root@pek2-lab-08-dhcp158 ~]# grep "vmware_drv" /var/log/Xorg.0.log
(II) Loading /usr/lib64/xorg/modules/drivers/vmware_drv.so <===vmware_drv is loaded.
[[root@pek2-lab-08-dhcp158 ~]# grep "vmmouse_drv" /var/log/Xorg.0.log
(II) Loading /usr/lib64/xorg/modules/input/vmmouse_drv.so <====vmmouse_drv is loaded.
result on OL 5.8
===========
[root@pek2-lab-08-dhcp84 ~]# cat /etc/issue
Oracle Linux Server release 5.8
Kernel \r on an \m
[root@pek2-lab-08-dhcp84 ~]# grep "vmware_drv" /var/log/Xorg.0.log
(II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so <====by default, vmware_drv is loaded; same with RHEL 5.8.
[root@pek2-lab-08-dhcp84 ~]# grep "vmmouse" /var/log/Xorg.0.log
[root@pek2-lab-08-dhcp84 ~]# <=====not same with RHEL 5.8.
[root@pek2-lab-08-dhcp84 ~]# grep "mouse" /var/log/Xorg.0.log
Using the default mouse configuration.
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so <====instead, normal mouse_drv is loaded.

Similar Messages

  • 64-bit driver does not load at boot

    Hi.
    After recompiling a scsi target driver for 64 bits, it does not load automatically at boot time as it does if booting 32-bit kernel.
    The 64-bit module is copied to /usr/kernel/drv/sparcv9. the <driver>.conf file is in /usr/kernel/drv. Using add_drv is fine, it attaches and loads the driver (the driver works also).
    It also loads using modload manually after boot or calling it from /etc/rc3 or so.
    what else is required on 64-bit kernel to get the autoload?
    Thanks,
    Luis.

    Hi.
    After recompiling a scsi target driver for 64 bits, it does not load automatically at boot time as it does if booting 32-bit kernel.
    The 64-bit module is copied to /usr/kernel/drv/sparcv9. the <driver>.conf file is in /usr/kernel/drv. Using add_drv is fine, it attaches and loads the driver (the driver works also).
    It also loads using modload manually after boot or calling it from /etc/rc3 or so.
    what else is required on 64-bit kernel to get the autoload?
    Thanks,
    Luis.

  • SoundMax audio driver did not load after returning from StandBy.

    After my computer returns from StandBy, it shows me this message. "The SoundMax audio driver did not load. You may need to reinstall SoundMAX". I have downloaded and installed the latest driver that was supposed to fix this issue on Windows XP T61. Is there another solution?

    Hi,
    I wanted to confirm, that this issue occurs also to me, and started happening recently. Also the driver sometimes does not start when simply booting clean (not returning from StandBy). I'm not sure,  but I think this started happening after some driver update (I do upgrade my drivers when lenovo updates them hoping they'll fix some of the annoying glitches, but this is what I usually get...).
    My machine is: lenovo t61 7664-19G
    And I also have: windows XP
    If someone more tech-able would like to investigate this, I would be happy to supply all the details.

  • Sidetrack driver does not load

    Hi,
    I've installed the latest version of sidetrack. but when i open sidetrack a message window pops up saying:
    'The SideTrack driver is not loaded.
    Please restart your computer to load the driver.'
    I have done exactly as the readme file says.
    When i got my mac i did a custom install so i did'nt fill up my hard drive with language packs etc. i do not need. do i need to install something else that would otherwise be in osx for this to work?

    I have tried restarting several times aswell as uninstalling, reinstalling and downloading the program again.
    When i right click the sidetrack app. in the startup folder and select get info it says that the application is a unix executible file.
    I can only find one other person on the forum with this problem but it was not answered.
    Thank you

  • HT1752 IMac G5 Intel.  Disk drive will not load data, music or video disks.  What is this indication of?  Can it be fixed?

    If my disk drive is NOT loading cds, dvds, etc., what fix is suggested?

    PS - your Mac is Intel. G5 is the previous processer, it can't be both

  • Icloud-Outlook-Add-in not loaded automatically

    Dear Support Community,
    I've been using my Iphones together with my Win PC / Outlook for several months.
    No problems.
    Since a few days, there's always the problem, that the "i-cloud-Outlook-Add-in" is not
    loaded automatically, when I start Outlook.
    Manual activiation (via Options -> Add-In --> Com Add-in --> tick in the box at "i-Cloud ...")
    works perfect.
    I've checked the registry entry "LoadBehaviour": 3 --> correct value, in my opinion.
    Any ideas, how to get outlook to load the icloud add-in automatically at startup?
    Thank you very much in advance.
    Regards

    I just had a user call in with this exact same problem.  The steps that I took to resolve the issue are as follows:
    1.  Ran a repair on office installation and rebooted computer. (Not sure if this was nesary).
    2.  In Outlook go to File-Options-Add-Ins.  Below for Manage COM Add-ins click the Go button.
    3.  find iCloud add-in and check it off to enable it.  Click on OK until your back at outlook.
    4.  Close and relaunch outlook.  Go back to File-Options-Add-Ins and down at the Manage change the dropdown to "Disabled Items".
    5.  Choose the iCloud.dll checkbox and click on enable.
    6.  Close outlook and reopen.  You should now see the ribbon for iCloud sync.

  • Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

    Since upgrading to the new firefox, pictures on facebook do not load automatically. I have to click on the frame and select view image in order to see the photos. Do you have a solution to make the photos autoload?

    https://support.mozilla.com/en-US/questions/891839

  • In chrome browser says : "could not load adobe acrobat npapi plug-in version 10.1.4"   whenever i ne

    I  have not been able to use chrome browser the last month for documents:  display says : "could not load adobe acrobat npapi plug-in version 10.1.4"  
    I haven't been able to figure out how to fix this, does anyone know what i need to do

    Go to chrome://plugins and enable chrome plugin 'Chrome PDF viewer'.
    Regards,
    Ravi.

  • Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified

    Server Error in '/' Application.
    Configuration Error 
    Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. 
    Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    Source Error: 
    Line 31: <compilation debug="true">
    Line 32: <assemblies>
    Line 33: <add assembly="Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89B483F429C47342" />
    Line 34: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
    Line 35: <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
    Source File: D:\AverySignatureBinders\httpsdocs\ASBNet\web.config    Line: 33 
    Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.102.2.20, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
    WRN: Assembly binding logging is turned OFF.
    To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
    Note: There is some performance penalty associated with assembly bind failure logging.
    To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

    For Adapter Pack 2013 the following Oracle Client(s) are needed:
    Supported client versions: Oracle Data Access Components for Oracle Client 12.1, Oracle Data Access Components for Oracle Client 11.2.0.1
    And please bear in mind that both the 32- and 64 bit versions are needed.
    Morten la Cour

  • Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specif

    Hi All,
    I am using Virtual box to connect to Sharepoint 2013 VPC. Due to an unexpected sutdown of my machine the VPC got some issue. Now I restored it using my bak up file. But after this when I deploy my sharepoint 2013 farm solution Iam getting the following error.
    Error occurred in deployment step 'Recycle IIS Application Pool': Could not load file or assembly 'Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies. The system cannot find the file specified..
    Editing the web.config and adding dependentAssembly didnt worked for me.
    What could be the issue? Any suggestions ?
    Thanks in advance...
    Regards
    Nimisha
    [email protected]

    Hi,
    Please try to do as follows:
    1. Check your farm solution whether reference the Microsoft.SharePoint.dll. Or try to add the Microsoft.SharePoint.dll into the bin folder.
    2. Execute the iisreset command.
    3. Create a new farm solution and check whether the issue still occurs or not.
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Has anyone seen this Dyld Error Message:   Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow   Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto   Reason: image not found

    Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found

    Yes, some perople have seen this. Options:
    1. Try reinstall iPhoto. (see below)
    2. If you have access to another Mac with the same version of the OS, try and copy that framework over
    3. Reinstall the OS.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.
    Regards
    TD

  • Could not load Adobe Acrobat NPAPI plug-in version 10.1.3.

    I could not load Adobe Acrobat NPAPI plug-in version 10.1.3.  I have an Apple Mac OSX 10.6.8.  Any ideas on what the problem could be?

    What app is trying to load it?

  • Could not load file or assembly 'Oracle.Web, Version=2.111.6.20

    I am getting the following error whenever I try to run ANY .NET Web application. It looks like the ODP.NET installer pooched IIS.
    Could not load file or assembly 'Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
    I searched for and copied the C:\oraclexe\app\oracle\product\10.2.0\client_1\ASP.NET\bin\2.x\Oracle.Web.dll file into C:\Windows\assembly, but that didn't help.
    TIA,
    Miles

    One thing might be if the web server has multiple versions of Oracle installed, then check to see which is first in the path. Another would be that at the least IIS would need to be restarted after the Oracle install, for the path to take effect, possibly the whole machine would need a re-boot for this.

  • Could not load file or assembly 'Oracle.DataAccess, Version=2.121.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.

    Hi All,
    While trying to access oracle database from SharePoint facing "Could not load file or assembly 'Oracle.DataAccess, Version=2.121.1.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified."
    How to fix this issue?  Thanks in advance!

    Hi,
    According to your post, my understanding is that you get error while access oracle database in SharePoint.
    You can set “Enable 32-bit Applications” to true in the application pool for the web application, then check whether it works.
    For more information:
    https://www.learningpenguin.net/myblog/2014/02/03/could-not-load-file-or-assembly-oracle-dataaccess-or-one-of-its-dependencies-an-attempt-was-made-to-load-a-program-with-an-incorrect-format/
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20

    I have visual Studio 2008 and ODAC installed on Winows 7, my VS2008 application retrieves data from Oracle Db 10g xe. I get this error report wih every attempt to connect and interact wih the database:
    "Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20,
    Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies.
    The system cannot find the file specified."
    What could be the issue? The same code that worked on Vista is the one returning this error report.

    I wonder if you could try the following command:
    gacutil.exe /l Oracle.DataAccess
    This should display the version number of the current assembly that it is GACed. In case that does not correspond to the version 2.111.6.20 then try:
    gacutil.exe /u Oracle.DataAccess
    and then find the path to the Oracle.DataAccess.dll assembly and issue the following command:
    gacutil.exe /i {path}/Oracle.DataAccess.dll
    The first command will display the version of the newly GACed assembly. If it still not what you are looking for please pass along the version that it is displayed.
    In case the version will match 2.111.6.20, then retry to use VS2008 to connect to your Oracle DB.

Maybe you are looking for

  • ITunes Duplicate Artwork

    I'm running 10.7.1 and iTunes 10.4 (64-bit). When adding artwork to selected items within iTunes via the get info window, the artwork is added TWICE for each item when double-clicking on the artwork box and navigating to the art. However, when select

  • Need a sample SSRS report with 3 groupings

    Where might I find a sample report with 3 groups that I could just download and modify for my purposes. I cannot get this to work right. I don't want any detail lines to show until all 3 groups have been chosen. Of course I'd like to learn how to do

  • Photosmart C4280 Problems Printng Black

    I saw a similar question was asked earlier today for a different printer, but the person never responded to follow up posts, so there was no answer. My printer is the Photosmart 4280, though. If it matters, I have been able to print black before and

  • Page not rendered correctly - Safari 4.0.4

    There seems to be some problem with rendering of a page when it only contains one absolute element: Page: http://www.321x.com/page.png Source code: http://www.321x.com/source.png Page that it concerns at this moment: http://www.321x.com Message was e

  • BI with FSG

    Hi everyone i have a confirmation is there a way by which we could integrate Finanacial Statement Generator in Oracle Applications to Business Intelligence Tool. if there is a integration plz could u guide me . Thanks & Regards