Vmware NFSLock lock file version mismatch BUSY
Hey everyone, I got a problem with one of our NFS datastores but I can't seem to interpret the error.
This is what I can see in /var/log/vmkernel.log
2015-08-03T07:50:31.595Z cpu1:34329)WARNING: NFSLock: 468: lock file .lck-3b0000000000d893 version mismatch 0x0 vs. 0xabcd0123 and 84 vs. 84
2015-08-03T07:50:31.595Z cpu1:34329)NFSLock: 2941: failed to get lock on file access 0x4109285ddfe0 on 10.10.10.102 (10.10.10.102): Busy
This error keeps showing up with just a few seconds interval on all hosts connected to the store, even if we have no active VMs on it. Does anyone know how we can troubleshoot this and "version mismatch" means in this case?
خدمة إصلاح ليبهر تقدم لكمالصيانة الشاملة لأجهزة ليبهر بالكامل 01093055835// 0235699066 // 01207619993 // 0235710008 // // 01112124913خبراء في مجال صيانة الاجهزة المنزلية ( ماركة ليبهر ) الاولي في مصر .ماهرون في صيانة ليبهر .اصلاح فوري بالمنزل مهما كان العطل مع ضمان عام كامل مع متابعة كل 3 شهور .اسطول متنقل للاصلاح بالمنزل والخدمة الفورية . اصلاح ثلاجة ليبهر , تقنيون صيانة ليبهر , مهندسون متخصصون في مجال الصيانة العالمية ليبهرنحن مركز خدمات الاجهزة المنزلية ليبهر . اجود قطع غيار , اجود معاملة مع عميل ليبهر .لاتقلق علي جهازك , نحن نلبي جميع طلباتك .صيانة ليبهر , خدمة فورية ليبهر , اصلاح ليبهر معتمد .أهم شغلنا اننا نحافظ علي عمل ليبهر بمصر أرقام صيانة ليبهر : 0235699066 // 01093055835 // 01207619993 // 0235710008 // 01112124913عندما نتعامل مع شركة صيانة ليبهر تجد أميز خدمة و أجود صيانة ليبهر الاول , ليبهر المعتمد , اسرع استجابة , اصلاح...
Similar Messages
-
Version Mismatch and Missing recommended icon file
I got these to error message when i upload my app. Can someone help me figure this out please
Thx
Version Mismatch - Neither CFBundleVersion ['30.3.0.5.96880'] nor CFBundleShortVersionString ['1.0.4'] in the Info.plist match the version of the app set in iTunes Connect ['1.0'].
Missing recommended icon file - The bundle does not contain an app icon for iPad of exactly '152x152' pixels, in .png format for iOS versions >= 7.0.The first one is a specific as it can possibly be. If you don’t want to add the icon then don’t but it could cause things to look a bit poor on retina devices.
The second one can safely be ignored. -
Observer.dll version Mismatch with DI API when connecting to company
Please help!
I recently upgraded to patch 47 from 45, I entered the company through the di api, and I got an error that said something about external component threw an exception, I closed my program and tried to enter again, now I'm getting this Observer.dll Mismatch, when trying to connect to the company.
I saw another post, and verified the DI API dll SAPbobsCOM with THE SCAB table in SBO-COMMON, and both are 800181.
Iam using the SAPbobsCOM dll that its under C:\Program Files\SAP\SAP Business One\DI API\2007, although I have to say, I was using another dll from the examples folder in the SDK, when I started getting the error I changed to the one above. Ive tried deleting the SBO-COMMON database and then executing the upgrade patch 47 to rebuild, but Im getting the same error.
More Info: I took a look at this temp folder:
C:\Documents and Settings\username\Local Settings\Temp\SM_OBS_DLL\800148
Ive noticed that the version is diferent, but where does it come from?
Thank you!
Edited by: Josu00E9 Inu00E9s Cantu00FA Arrambide on Mar 31, 2009 7:51 PM
Edited by: Josu00E9 Inu00E9s Cantu00FA Arrambide on Mar 31, 2009 8:02 PMMy Bad, I was connecting to the wrong server.
-
Error -8012 Company version mismatch ?
Hi.
When trying to connect using the Company object, the DI API returns "-8012 Company version mismatch"
Does anybody know what it means, or even better - know what causes this error?Hi Jan,
Seen your message looks like your DI API is not in the same version as your company is. What Patch Level have you got in your company? You can see it when you choose the company.
And you can see the DI API version where you have installed it (something like "SAP ManageSAP Business One DI APIDI API 67Object"). Look for the SAPbobsCOM67.dll file and its version in the properties window.
Regards,
Ibai Peñ -
Dp lib version mismatch-After kernel upgrade
Hi All,
After kernel upgrade from 700 162 to 179 all the workprocess are not coming up i am getting the below error:
Full qualified hostname = XXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 00:33:37 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
XXXXXXXXX:ts2adm 30% pg sapcpe.log
================ >>> main =======================
INFO: sapcpe version: @(#) $Id: //bas/700_REL/src/ccm/sapstart/sapxxcpe.c#18 $ SAP
=================================================
INFO: Try to find file table sapcpeft (default:sapcpeft)
INFO: Try to find file table in the central directory /usr/sap/TS2/SYS/exe/ctrun/sapcpeft
INFO: not found any file table.
=================================================
Update Local Programs (dir-sync + file-path + ln)
=================================================
Starting at 2008/10/20 00:33:34
ERROR: can't change to central Executable-Dir /usr/sap/TS2/SYS/exe/ctrun (No such file or directory) [sapxxcpe.c:1488]
Mon Oct 20 00:50:19 2008
ERROR => gateway (pid 24413) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
please help in solving this problem
Thanks
Giridhar
Edited by: giridhar n on Oct 20, 2008 12:47 PMHi,
We faced an issue with workprocesses which are not coming up after the kernel(700) upgrade from patch 162 to 179. below are the error logs:
Error Log
(XXXXXXXXX is the hostname)
Dev_W1:
XXXXXXXXX:ts2adm 9% more dev_w1.old
trc file: "dev_w1", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 01
M sid TS2
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 162
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 3867
M
M
M Mon Oct 20 03:59:26 2008
M kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 1 1 3867) [thxxhead.c 1281]
M ThInit: running on host XXXXXXXXX
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C
C Mon Oct 20 03:59:27 2008
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPTS2's password
C Connecting as /-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Attaching to DB Server TS2 (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598)
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now '/-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Got SAPTS2's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106f02248,usrhp=0x106ef2398)
C Now I'm disconnected from ORACLE
C Connecting as SAPTS2/<pwd>-TS2 on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106eea0c0 0x106ef1b80 0x106f02318
C Starting user session (con_hdl=0,svchp=0x106f02248,srvhp=0x106f04598,usrhp=0x106ef2398)
C Now 'SAPTS2/<pwd>-TS2' is connected: con_hdl=0, nls_hdl=0, session_id=475.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance TS2 is running on XXXXXXXXX with ORACLE version 10.2.0.2.0 since OCT 20, 2008, 03:49:47
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081020 035926 XXXXXXXXX
C build_stmt: reallocating stmt buffer: 256 -> 2000 characters
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
.sar,.gif
I
I Mon Oct 20 03:59:30 2008
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff64c00000, size: 20000768)
M SHM_ROLL_AREA (addr: 0xfffffffe40000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0xfffffffe36000000, size: 134217728)
M SHM_ROLL_ADM (addr: 0xffffffff7597a000, size: 3715586)
M SHM_PAGING_ADM (addr: 0xffffffff79a00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe2c004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7a900000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 1 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0xfffffffe2c092088, size: 576)
B dbntab: Buffer FTAB(anchor array) (addr: 0xfffffffe2c0922c8, size: 798968)
B dbntab: Buffer FTAB(item array) (addr: 0xfffffffe2c1553c0, size: 3195648)
B dbntab: Buffer FTAB(data area) (addr: 0xfffffffe2c4616c0, size: 30740480)
B dbntab: Buffer IREC(hash header) (addr: 0xfffffffe2e1b6088, size: 576)
B dbntab: Buffer IREC(anchor array) (addr: 0xfffffffe2e1b62c8, size: 798968)
B dbntab: Buffer IREC(item array) (addr: 0xfffffffe2e2793c0, size: 798912)
B dbntab: Buffer IREC(data area) (addr: 0xfffffffe2e33c480, size: 6148096)
B dbntab: Buffer STAB(hash header) (addr: 0xfffffffe2e91c088, size: 576)
B dbntab: Buffer STAB(anchor array) (addr: 0xfffffffe2e91c2c8, size: 798968)
B dbntab: Buffer STAB(item array) (addr: 0xfffffffe2e9df3c0, size: 798912)
B dbntab: Buffer STAB(data area) (addr: 0xfffffffe2eaa2480, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0xfffffffe2ed94088, size: 3072)
B dbntab: Buffer TTAB(anchor array) (addr: 0xfffffffe2ed94c88, size: 798968)
B dbntab: Buffer TTAB(item array) (addr: 0xfffffffe2ee57d80, size: 1997280)
B dbntab: Buffer TTAB(data area) (addr: 0xfffffffe2f03f760, size: 14580144)
B db_con_shm_ini: WP_ID = 1, WP_CNT = 24, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 0xfffffffe28012008)
B dbtbxbuf: Buffer TABL (addr: 0xfffffffe24000100, size: 60000256, end: 0xfffffffe27938900)
B dbtbxbuf: Buffer TABLP (addr: 0xfffffffe20000100, size: 40960000, end: 0xfffffffe22710100)
B dbexpbuf: Buffer EIBUF (addr: 0xffffffff5d800108, size: 4194304, end: 0xffffffff5dc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe2fe30108, size: 5120000, end: 0xfffffffe30312108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe59800108, size: 4194304, end: 0xfffffffe59c00108)
B dbcalbuf: Buffer CALE (addr: 0xffffffff75d08000, size: 500000, end: 0xffffffff75d82120)
I *** ERROR => ShmProtect(62,3) shmat(268435641,0x0xfffffffe5a000000,(SHM_RND | 0)) (22: Invalid argument) [shmux.c 2782]
I *** ERROR => ShmCreate: ShmProtect( 62, 3) failed [shmux.c 1359]
I *** ERROR => ShmCreate( ATTACH 62, 86228824) failed 1 [mpixx.c 855]
M *** ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 5064]
M in_ThErrHandle: 1
M *** ERROR => ThInit: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10506]
M
M Info for wp 1
M
M pid = 3867
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Saving TBX statistics:
B dbtbxbuf: 0 object entries written.
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3867) [dpuxtool.c 269]
dev_icm:
trc file: "dev_icm", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 177
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3865
[Thr 1] started security log to file dev_icm_sec
[Thr 1] ICM running on: XXXXXXXXX.saipc.XXX.com
[Thr 1] MtxInit: 30001 0 2
[Thr 1] IcmInit: listening to admin port: 64999
[Thr 1] ***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2_mt 681]
[Thr 1]
[Thr 1] * LOCATION ICM runing on host XXXXXXXXX
[Thr 1] * ERROR dp lib version mismatch, please check installation
[Thr 1] *
TIME Mon Oct 20 03:59:28 2008
[Thr 1] * RELEASE 700
[Thr 1] * COMPONENT DP
[Thr 1] * VERSION 241000
[Thr 1] * RC -9999
[Thr 1] * MODULE dpxxtool2_mt.c
[Thr 1] * LINE 688
[Thr 1] * DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
[Thr 1] * COUNTER 3
[Thr 1] *
[Thr 1] *****************************************************************************
[Thr 1] *** ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2_mt 369]
[Thr 1] *** ERROR => IcmInit: IcmIPCInit failed (rc=-9999) [icxxman_mt.c 1741]
[Thr 1] *** ICM shutdown completed (pid: 3865) ***
dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Mon Oct 20 03:59:24 2008
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 145
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3853
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 3853) [msxxserv_mt. 1834]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/TS2/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] 3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
[Thr 1] 4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = XXXXXXXXX.saipc.XXX.com
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = saipc.XXX.com
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsTS2 (3601) ***
[Thr 1] *** I listen to internal port 3901 (3901) ***
[Thr 1] CUSTOMER KEY: >C0395101982<
[Thr 1] Mon Oct 20 04:01:28 2008
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from XXXXXXXXX_TS2_01 [msxxserv_mt. 4687]
[Thr 1] Mon Oct 20 04:05:07 2008
[Thr 1] MsSExit: received SIGINT (2)
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 3853) [msxxserv_mt. 5998]
dev_rd:
trc file: "dev_rd", trc level: 1, release: "700"
Mon Oct 20 03:59:26 2008
***LOG S00=> GwInitReader, gateway started ( 3864) [gwxxrd.c 1757]
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 176
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3864
gateway runs with dp version 241000(ext=110000) (-(#) DPLIB-INT-VERSION-241000-UC)
gateway (version=700.2008.06.23)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Oct 20 03:59:27 2008
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [148.92.31.49] XXXXXXXXX (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
3 : [148.92.31.157] XXXXXXXXX-maint (NILIST)
4 : [10.220.6.72] XXXXXXXXX-bkup (NILIST)
Full qualified hostname = XXXXXXXXX.saipc.XXX.com
***LOG Q0Z=> DpSysAdmExtCreate, bad version (lib=241000 krn=239000) [dpxxtool2.c 681]
LOCATION SAP-Gateway on host XXXXXXXXX / sapgw01
ERROR dp lib version mismatch, please check installation
TIME Mon Oct 20 03:59:27 2008
RELEASE 700
COMPONENT DP
VERSION 241000
RC -9999
MODULE dpxxtool2.c
LINE 688
DETAIL version of external and kernel dp lib mismatch (ext lib
version is 241000 / kernel lib version is 239000)
COUNTER 1
ERROR => DpIPCInit2: DpSysAdmExtCreate [dpxxtool2.c 369]
***LOG S0V=> GwStopGateway, gateway stopped () [gwxxrd.c 14652]
dev_rfc24:
Trace file opened at 20081020 031506 EDT SAP-REL 700,0,162 RFC-VER U 3 985555
======> User is locked. Please notify the person responsible
ABAP Programm: SAPLTMSC (Transaction: )
Called function module: TMS_CI_START_SERVICE
User: DDIC (Client: 015)
Destination: TMSADM-TS2.DOMAIN_DV2 (handle: 2, 11671309, {48FC3006-2FF4-60E5-E100-0000945C1F31})
dev_disp
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 01
sid TS2
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 162
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 3854
Mon Oct 20 03:59:25 2008
kernel runs with dp version 239000(ext=110000) (-(#) DPLIB-INT-VERSION-239000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 3854) [dpxxdisp.c 1257]
shared lib "dw_xml.so" version 162 successfully loaded
shared lib "dw_xtc.so" version 162 successfully loaded
shared lib "dw_stl.so" version 162 successfully loaded
shared lib "dw_gui.so" version 162 successfully loaded
shared lib "dw_mdm.so" version 162 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >XXXXXXXXX_TS2_01 <
DpShMCreate: sizeof(wp_adm) 42240 (1760)
DpShMCreate: sizeof(tm_adm) 150350080 (30064)
DpShMCreate: sizeof(wp_ca_adm) 31232 (104)
DpShMCreate: sizeof(appc_ca_adm) 208000 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (1000056/862328/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff66000000, size: 153051096)
DpShMCreate: allocated sys_adm at 0xffffffff66000000
DpShMCreate: allocated wp_adm at 0xffffffff66002218
DpShMCreate: allocated tm_adm_list at 0xffffffff6600c718
DpShMCreate: allocated tm_adm at 0xffffffff6600c778
DpShMCreate: allocated wp_ca_adm at 0xffffffff6ef6f078
DpShMCreate: allocated appc_ca_adm at 0xffffffff6ef76a78
DpShMCreate: allocated comm_adm at 0xffffffff6efa96f8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff6f02f3d8
DpShMCreate: allocated gw_adm at 0xffffffff6f02f458
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff6f02f488
DpShMCreate: allocated wall_adm at 0xffffffff6f02f490
Mon Oct 20 03:59:26 2008
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4048 MB allocated
<ES> 4047 blocks reserved for free list.
ES initialized.
Mon Oct 20 03:59:31 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1659]
***LOG Q0K=> DpMsAttach, mscon ( XXXXXXXXX) [dpxxdisp.c 12153]
DpStartStopMsg: send start message (myname is >XXXXXXXXX_TS2_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
ERROR => DpWPCheck: W0 (pid 3866) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3866) exited with exit code 255
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => DpWPCheck: W1 (pid 3867) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3867) exited with exit code 255
ERROR => DpWPCheck: W2 (pid 3868) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3868) exited with exit code 255
ERROR => DpWPCheck: W4 (pid 3870) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3870) exited with exit code 255
ERROR => DpWPCheck: W5 (pid 3871) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3871) exited with exit code 255
ERROR => DpWPCheck: W6 (pid 3872) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3872) exited with exit code 255
ERROR => DpWPCheck: W7 (pid 3873) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3873) exited with exit code 255
ERROR => DpWPCheck: W8 (pid 3874) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3874) exited with exit code 255
ERROR => DpWPCheck: W9 (pid 3875) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3875) exited with exit code 255
ERROR => DpWPCheck: W10 (pid 3885) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3885) exited with exit code 255
ERROR => DpWPCheck: W11 (pid 3888) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3888) exited with exit code 255
ERROR => DpWPCheck: W12 (pid 3890) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3890) exited with exit code 255
ERROR => DpWPCheck: W13 (pid 3902) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3902) exited with exit code 255
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 162
Release check o.K.
Mon Oct 20 03:59:51 2008
my types changed after wp death/restart 0xbd --> 0x81
ERROR => DpWPCheck: W14 (pid 3903) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3903) exited with exit code 255
ERROR => DpWPCheck: W15 (pid 3904) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3904) exited with exit code 255
ERROR => DpWPCheck: W16 (pid 3905) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3905) exited with exit code 255
ERROR => DpWPCheck: W17 (pid 3908) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3908) exited with exit code 255
ERROR => DpWPCheck: W18 (pid 3911) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3911) exited with exit code 255
ERROR => DpWPCheck: W19 (pid 3914) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3914) exited with exit code 255
ERROR => DpWPCheck: W20 (pid 3915) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3915) exited with exit code 255
ERROR => DpWPCheck: W21 (pid 3916) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3916) exited with exit code 255
ERROR => DpWPCheck: W22 (pid 3919) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3919) exited with exit code 255
ERROR => DpWPCheck: W23 (pid 3924) died (severity=0, status=65280) [dpxxdisp.c 15218]
child (pid=3924) exited with exit code 255
Mon Oct 20 04:00:11 2008
ERROR => gateway (pid 3864) died [dpxxdisp.c 16063]
DpGwCheck: appc_adm.stat = 2
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
kill(3869,0) successful -> process alive
killing W3-3869 (SIGUSR2)
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 20 08:00:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3866 Ended no 3 0 0
1 DIA 3867 Ended no 3 0 0
2 DIA 3868 Ended no 3 0 0
3 DIA 3869 Run yes 0 0 0
4 DIA 3870 Ended no 3 0 0
5 DIA 3871 Ended no 3 0 0
6 DIA 3872 Ended no 3 0 0
7 DIA 3873 Ended no 3 0 0
8 DIA 3874 Ended no 3 0 0
9 DIA 3875 Ended no 3 0 0
10 UPD 3885 Ended no 3 0 0
11 UPD 3888 Ended no 3 0 0
12 UPD 3890 Ended no 3 0 0
13 UPD 3902 Ended no 3 0 0
14 ENQ 3903 Ended no 2 0 0
15 BTC 3904 Ended no 2 0 0
16 BTC 3905 Ended no 2 0 0
17 BTC 3908 Ended no 2 0 0
18 BTC 3911 Ended no 2 0 0
19 BTC 3914 Ended no 2 0 0
20 BTC 3915 Ended no 2 0 0
21 SPO 3916 Ended no 2 0 0
22 UP2 3919 Ended no 2 0 0
23 UP2 3924 Ended no 2 0 0
Dispatcher Queue Statistics Mon Oct 20 08:00:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
4000
0
0
--------++++--
+
DIA
4
4
4000
4
0
--------++++--
+
UPD
0
0
4000
0
0
--------++++--
+
ENQ
0
0
4000
0
0
--------++++--
+
BTC
0
0
4000
0
0
--------++++--
+
SPO
0
0
4000
0
0
--------++++--
+
UP2
0
0
4000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 2 ( 66%), shm 1 ( 33%)
since last update total 3, udp 2 ( 66%), shm 1 ( 33%)
Dump of tm_adm structure: Mon Oct 20 08:00:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Oct 20 08:00:21 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=12
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 20 04:00:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >XXXXXXXXX_TS2_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
please help me to solve this.
Thanks
Giridhar -
How do i unlock all locked files in HD??
hello,
i just got my machine back from the repair shop...and every file is locked and i cannot make modifications to anything..
is there a setting i can use to turn off all locked files??
thanks,
stevenAs I pointed, and esp. with an SSD, leave the home library on t he boot drive works great.
The sidebar can have whatever you want, maybe not the default pretty icon for the default folders, but folders, hdd etc that you drag onto the sidebar. Folders, not files.
Using OS X with an SSD plus HDD setup, by Matt Gemmell
http://mattgemmell.com/using-os-x-with-an-ssd-plus-hdd-setup/
How to relocate system and user data to another drive:
http://reviews.cnet.com/8301-13727_7-57603361-263/how-to-move-a-home-folder-in-o s-x/
http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/
http://support.apple.com/kb/HT4337
To successfully relocate your operating system, user accounts and data from one storage device to another, meet the following conditions:
The destination storage device (SSD drive or hard drive) you are migrating to should be physically located in the same computer. Moving operating system files from one computer to another computer using software not specifically designed for that computer can cause issues due to software, hardware, and firmware version mismatches.
Always back up your storage device with Time Machine or Disk Utility before you start.
Home Folders not on a Startup volume
http://pondini.org/OSX/SetupOther.html -
Problems rebooting: "couldn't lock for reboot: Resource busy"
Hi there,
I'm having trouble rebooting my Xserve G4. The server has been up for 128 days, and a previous admin had installed some software updates, and I recently applied several new ones including 'Java for Mac OS X 10.5 Update 5', QuickTime 7.6.6 and Safari 4.0.5.
It appears it's been trying to reboot ever since the first set of updates, but is not able to. What is strange is that even after having applied the updates mentioned, Server Admin still lists these same software updates as new, uninstalled updates, and asks me to install them.
Also, the CPU usage is running at around 60%, and diskarbitrationd and kextcache seem to be the main CPU hogs.
I have tried asking the machine to reboot through Server Monitor, and it fails, stating:
14/05/2010 10:32:42: Starting remote hardware monitoring for ‘laramie.gcal.ac.uk’
14/05/2010 10:32:43: Server contacted successfully
14/05/2010 10:32:43: Connection to server established
14/05/2010 10:33:01: Restart request sent, waiting for confirmation…
14/05/2010 10:33:01: Server restarting
14/05/2010 10:33:12: Failed to contact server
14/05/2010 10:38:46: Restart request sent, waiting for confirmation…
14/05/2010 10:39:10: Server restarting
14/05/2010 10:49:18: Configuration sent, waiting for confirmation…
14/05/2010 10:49:19: Configuration sent, waiting for confirmation…
14/05/2010 10:49:24: Configuration received by server and now active
14/05/2010 10:49:24: Configuration received by server and now active
But the server never actually reboots.
I've also tried 'sudo reboot' at the shell, and this generates:
laramie:~ swadmin$ sudo reboot
reboot: / is busy updating; waiting for lock
reboot: couldn't lock for reboot: Resource busy
Here's what's in /var/log/system.log, on a continuous loop:
May 14 11:04:36 laramie servermgrd[55638]: --Module servermgr_xserve's response has retain count of 1.
May 14 11:04:37 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:37 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:38 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39316]): Exited with exit code: 1
May 14 11:04:38 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
May 14 11:04:40 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 7 seconds
May 14 11:04:41 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:41 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:42 laramie com.apple.launchd[353] ([0x0-0x1540c3f7].com.apple.finder[39326]): Exited with exit code: 1
May 14 11:04:44 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 3 seconds
May 14 11:04:45 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:45 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:48 laramie servermgrd[55638]: --Module servermgr_xserve's response has retain count of 1.
May 14 11:04:48 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:48 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:49 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39346]): Exited with exit code: 1
May 14 11:04:49 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
May 14 11:04:50 laramie com.apple.launchd[353] ([0x0-0x1540e3f9].com.apple.finder[39347]): Exited with exit code: 1
May 14 11:04:51 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 7 seconds
May 14 11:04:52 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:52 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:54 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
May 14 11:04:55 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:55 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:57 laramie com.apple.launchd[353] ([0x0-0x154113fc].com.apple.finder[39370]): Exited with exit code: 1
May 14 11:04:57 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 1 seconds
May 14 11:04:58 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:04:58 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:04:59 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39378]): Exited with exit code: 1
May 14 11:04:59 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
May 14 11:05:00 laramie servermgrd[55638]: --Module servermgr_xserve's response has retain count of 1.
May 14 11:05:00 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
May 14 11:05:01 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:01 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:03 laramie com.apple.launchd[353] ([0x0-0x154143ff].com.apple.finder[39392]): Exited with exit code: 1
May 14 11:05:04 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
May 14 11:05:04 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:04 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:06 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 2 seconds
May 14 11:05:07 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:07 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39413]): Exited with exit code: 1
May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
May 14 11:05:10 laramie com.apple.launchd[353] ([0x0-0x15416401].com.apple.finder[39415]): Exited with exit code: 1
May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
May 14 11:05:11 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:11 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:14 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
May 14 11:05:15 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:15 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:17 laramie com.apple.launchd[353] ([0x0-0x15419404].com.apple.finder[39433]): Exited with exit code: 1
May 14 11:05:18 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 1 seconds
May 14 11:05:18 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:18 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:21 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39445]): Exited with exit code: 1
May 14 11:05:21 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
May 14 11:05:22: --- last message repeated 1 time ---
May 14 11:05:22 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:22 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:24 laramie com.apple.launchd[353] ([0x0-0x1541c407].com.apple.finder[39454]): Exited with exit code: 1
May 14 11:05:24 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 5 seconds
May 14 11:05:25 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:25 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:27 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 3 seconds
May 14 11:05:28 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:28 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:30 laramie com.apple.launchd[353] ([0x0-0x1541e409].com.apple.finder[39477]): Exited with exit code: 1
May 14 11:05:31 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:31 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:31 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39480]): Exited with exit code: 1
May 14 11:05:31 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
May 14 11:05:33 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 7 seconds
May 14 11:05:34 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:34 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:37 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 3 seconds
May 14 11:05:37 laramie com.apple.launchd[353] ([0x0-0x1542140c].com.apple.finder[39498]): Exited with exit code: 1
May 14 11:05:37 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:37 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:03 laramie com.apple.launchd[353] ([0x0-0x154143ff].com.apple.finder[39392]): Exited with exit code: 1
May 14 11:05:04 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
May 14 11:05:04 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:04 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:06 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 2 seconds
May 14 11:05:07 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:07 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter[39413]): Exited with exit code: 1
May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 9 seconds
May 14 11:05:10 laramie com.apple.launchd[353] ([0x0-0x15416401].com.apple.finder[39415]): Exited with exit code: 1
May 14 11:05:10 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 8 seconds
May 14 11:05:11 laramie kextd[24]: 0x17ad40 exited without unlocking '/'
May 14 11:05:11 laramie kextd[24]: / is still busy, delaying reboot
May 14 11:05:14 laramie com.apple.launchd[1] (com.apple.UserNotificationCenter): Throttling respawn: Will start in 4 seconds
Here's the output of 'kextstat':
kextstat
Index Refs Address Size Wired Name (Version) <Linked Against>
1 1 0x0 0x0 0x0 com.apple.kernel (9.8.0)
2 26 0x0 0x0 0x0 com.apple.kpi.bsd (9.8.0)
3 3 0x0 0x0 0x0 com.apple.kpi.dsep (9.8.0)
4 33 0x0 0x0 0x0 com.apple.kpi.iokit (9.8.0)
5 35 0x0 0x0 0x0 com.apple.kpi.libkern (9.8.0)
6 34 0x0 0x0 0x0 com.apple.kpi.mach (9.8.0)
7 18 0x0 0x0 0x0 com.apple.kpi.unsupported (9.8.0)
8 1 0x0 0x0 0x0 com.apple.iokit.IONVRAMFamily (9.8.0)
9 1 0x0 0x0 0x0 com.apple.driver.AppleNMI (9.8.0)
10 1 0x0 0x0 0x0 com.apple.iokit.IOSystemManagementFamily (9.8.0)
11 1 0x0 0x0 0x0 com.apple.iokit.ApplePlatformFamily (9.8.0)
12 29 0x0 0x0 0x0 com.apple.kernel.6.0 (7.9.9)
13 1 0x0 0x0 0x0 com.apple.kernel.bsd (7.9.9)
14 1 0x0 0x0 0x0 com.apple.kernel.iokit (7.9.9)
15 1 0x0 0x0 0x0 com.apple.kernel.libkern (7.9.9)
16 1 0x0 0x0 0x0 com.apple.kernel.mach (7.9.9)
17 14 0x35594000 0x14000 0x13000 com.apple.iokit.IOPCIFamily (2.6) <7 6 5 4>
18 4 0x355ae000 0x5000 0x4000 com.apple.driver.IOPlatformFunction (1.8.7d5) <12>
19 0 0x355c5000 0x10000 0xf000 com.apple.driver.AppleMacRISC2PE (1.8.7d5) <18 17 12 7 5 4>
20 0 0x35688000 0x6000 0x5000 com.apple.BootCache (30.4) <7 6 5 4 2>
21 1 0x3578e000 0x4c000 0x4b000 com.apple.iokit.IOHIDFamily (1.5.5) <7 6 5 4 2>
22 0 0x357e2000 0x4000 0x3000 com.apple.security.TMSafetyNet (3) <7 6 5 3 2>
23 0 0x35806000 0xb000 0xa000 com.apple.nke.applicationfirewall (1.6.77) <7 6 5 4 2>
24 0 0x35860000 0x1e000 0x1d000 com.apple.security.seatbelt (107.12) <7 6 5 3 2>
25 0 0x3a2f0000 0x4000 0x3000 com.apple.driver.AppleFlashNVRAM (1.0.5) <12>
27 0 0x3a376000 0xa000 0x9000 com.apple.driver.AppleMacRiscPCI (3.4.0) <17 12>
28 0 0x3b39b000 0x8000 0x7000 com.apple.driver.AppleI2C (4.0.0d2) <12>
29 0 0x3b3b3000 0x4000 0x3000 com.apple.driver.AppleCPUThermo (2.0.0a0) <12>
30 0 0x3b44f000 0x6000 0x5000 com.apple.driver.AppleKiwiRoot (1.0.5f1) <17 12>
31 2 0x3b673000 0x5b000 0x5a000 com.apple.iokit.IOFireWireFamily (3.4.9) <6 5 4 2>
32 0 0x3b712000 0x2f000 0x2e000 com.apple.driver.AppleFWOHCI (3.9.7) <31 17 7 6 5 4 2>
33 1 0x3b7e3000 0x5000 0x4000 com.apple.iokit.IOKeyLargo (1.7.2f1) <12>
34 0 0x3b7fc000 0x7000 0x6000 com.apple.driver.AppleKeyLargo (1.7.2f1) <33 18 17 12>
35 3 0x3b966000 0x37000 0x36000 com.apple.iokit.IOUSBFamily (3.4.9) <7 6 5 4 2>
36 0 0x3ba59000 0xe000 0xd000 com.apple.driver.AppleUSBOHCI (3.4.6) <35 17 6 5 4>
37 0 0x3ba76000 0x3000 0x2000 com.apple.driver.AppleBlower (2.0.0) <12>
38 0 0x3ba87000 0x4000 0x3000 com.apple.driver.MacIOGPIO (1.3.0d0) <12>
39 0 0x3ba9c000 0x5000 0x4000 com.apple.driver.I2CGPIO (1.3.0d0) <12>
40 2 0x3bb84000 0x22000 0x21000 com.apple.iokit.IOSCSIArchitectureModelFamily (2.1.1) <6 5 4 2>
41 1 0x3bbb7000 0xc000 0xb000 com.apple.iokit.IOSCSIParallelFamily (1.5.2) <40 6 5 4 2>
42 0 0x3bbfb000 0x18000 0x17000 com.apple.driver.AppleLSIFusionMPT (2.0.3) <41 17 6 5 4 2>
43 0 0x3bc27000 0x3000 0x2000 com.apple.driver.AppleKeyswitch (1.0.4d1) <12>
44 0 0x3bc86000 0x4000 0x3000 com.apple.driver.AppleMPIC (1.5.3) <17 12>
45 2 0x3bd0e000 0x12000 0x11000 com.apple.iokit.IOATAFamily (2.0.1) <6 5 4 2>
48 0 0x3bd4e000 0x4000 0x3000 com.apple.driver.AppleVIA (1.5.1d1) <12>
49 0 0x3bd6a000 0x4000 0x3000 com.apple.driver.AppleGPIO (1.3.0d0) <18 12>
50 0 0x3be74000 0x16000 0x15000 com.apple.driver.ApplePMU (2.5.6d2) <21 12 7 6 5 4>
51 0 0x3bee6000 0x3000 0x2000 com.apple.iokit.IOUSBUserClient (3.4.9) <35 6 5 4>
52 0 0x3bf9b000 0x10000 0xf000 com.apple.driver.AppleUSBHub (3.4.9) <35 6 5 4>
53 0 0x3c029000 0x4000 0x3000 com.apple.driver.AppleKiwiATA (1.0.2f1) <45 17 12>
55 5 0x3c13f000 0x21000 0x20000 com.apple.iokit.IOStorageFamily (1.5.6) <7 6 5 4 2>
56 0 0x3c19c000 0x13000 0x12000 com.apple.iokit.IOATABlockStorage (2.0.6) <55 45 6 5 4 2>
58 0 0x3c2f5000 0x6000 0x5000 com.apple.driver.XsanFilter (2.7.91) <55 12>
60 0 0x3c4f4000 0x24000 0x23000 com.apple.driver.AppleRAID (3.0.19) <55 6 5 4>
61 2 0x356c5000 0x26000 0x25000 com.apple.iokit.IOGraphicsFamily (1.7.3) <17 7 6 5 4>
62 1 0x356eb000 0x18000 0x17000 com.apple.iokit.IONDRVSupport (1.7.3) <61 17 7 6 5 4>
63 0 0x3567d000 0x3000 0x2000 com.apple.driver.AppleI2S (1.0.1f1) <12>
64 1 0x35703000 0xc000 0xb000 com.apple.iokit.IOSerialFamily (9.4) <7 6 5 4 2>
65 0 0x3570f000 0x9000 0x8000 com.apple.driver.AppleRS574Serial (1.3b7) <64 12>
66 0 0x35718000 0x4000 0x3000 com.apple.driver.AppleLED (2.0.0a2) <12>
67 0 0x3571c000 0x4000 0x3000 com.apple.driver.AppleLM87 (2.0.0) <12>
69 0 0x357e6000 0xf000 0xe000 com.apple.driver.AppleVSP (2.2.2) <12>
70 3 0x35811000 0x1f000 0x1e000 com.apple.iokit.IONetworkingFamily (1.6.1) <7 6 5 4 2>
71 0 0x35830000 0xb000 0xa000 com.apple.iokit.IOFireWireIP (1.7.7) <70 31 6 5 4 2>
72 1 0x35723000 0x4000 0x3000 com.apple.kext.OSvKernDSPLib (1.1) <6 5>
73 2 0x3b49d000 0x20000 0x1f000 com.apple.iokit.IOAudioFamily (1.6.9fc5) <72 6 5 4 2>
74 0 0x35727000 0x5000 0x4000 com.apple.driver.VirtualAudioDriver (2.5.8f1) <73 12>
79 0 0x3b4bd000 0x17000 0x16000 com.apple.iokit.AppleBCM5701Ethernet (2.2.3b1) <70 17 6 5 4 2>
80 0 0x3b3f5000 0xb000 0xa000 com.apple.iokit.AppleGMACEthernet (1.5.9f1) <70 17 6 5 4 2>
82 0 0x3a2f8000 0x3000 0x2000 com.apple.driver.AppleFPButton (1.0.5a1) <12>
83 0 0x3a31a000 0x3000 0x2000 com.apple.driver.AppleHWClock (1.5.2d0) <18 12>
84 0 0x3b4df000 0x44000 0x43000 com.apple.ATIRadeon (5.4.8) <62 61 17 12 4 2>
86 0 0x3b400000 0x5000 0x4000 com.apple.driver.AudioIPCDriver (1.0.6) <73 6 5 4 2>
90 0 0x3b57b000 0x16000 0x15000 com.apple.driver.DiskImages (199) <55 7 6 5 4 2>
91 0 0x3bd9a000 0xd000 0xc000 com.apple.filesystems.autofs (2.0.2) <7 6 5 4 2>
92 1 0x22c9d000 0xe000 0xe000 com.apple.driver.ndrv.ATY,BlueStar.0x22ca6248 (1.0.0f251)
93 0 0x3b555000 0x1b000 0x1a000 com.apple.iokit.IOSCSIBlockCommandsDevice (2.1.1) <55 40 6 5 4 2>
I'd be grateful for any help or advice in clari
Message was edited by: gregariousfruitI got sick of the error so hard-rebooted the server manually. Seems to be fine now, and software updates work as normal.
-
How to convert java class file version without decompiling
Hi,
Oracle R12.1.3 i am having illegal access error while try to access the class file version Java 1.3 uses major version 47,So how to convert the class file version without using decompiling.
Current java version is 1.6.0_07
Is there any tool or API for converting class file version?
Thanks,
Selvapandian TBeside this I wonder where you get your error from since AFAIK 12c comes with java 1.6.
Well wonder no more!
OP isn't using Oracle 12c database.
They are using Oracle R12.1.3 - which is the E- Business Suite. -
Hi Guys,
I have created a sample Data Template and registered it with apps and then created a concurrent program and have run that it produces the XML output correctly .. (good upto here)
Then i created a RTF template and attached the Data Definition to the RTF tempalte and to the Data Definition template i also attached a default xml data file
when i click the preview it dosent show me the preview but it shows an exception
oracle.apps.xdo.XDOException: Error creating lock file
What could be the problem ?
Thanks
Tom ....Hi Chris ,
Following are the details ..
Executeable Name : XDODTEXE
Concurrent program Short Name : DTFEMP
Data Template Code : DTFEMP
Rtf Template Code : DTFTMP
Content of the Data Template
<dataTemplate name="EmpData" description="Employee Details" Version="1.0">
<parameters>
<parameter name="p_DeptNo" dataType="character" />
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
SELECT d.DEPTNO,d.DNAME,d.LOC,EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,
nvl(COMM,0)
FROM scott.dept d, scott.emp e
WHERE d.deptno=e.deptno
AND d.deptno = nvl(:p_DeptNo,d.deptno)
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q1">
<element name="DEPT_NUMBER" value="DEPTNO" />
<element name="DEPT_NAME" value="DNAME" />
<element name="DEPTSAL" value="G_EMP.SALARY" function="SUM()" />
<element name="LOCATION" value="LOC" />
<group name="G_EMP" source="Q1">
<element name="EMPLOYEE_NUMBER" value="EMPNO" />
<element name="NAME" value="ENAME" />
<element name="JOB" value="JOB" />
<element name="MANAGER" value="MGR" />
<element name="HIREDATE" value="HIREDATE" />
<element name="SALARY" value="SAL" />
</group>
</group>
</dataStructure>
</dataTemplate>
Please let me know if you need some more details ......
Do i have to setup something before i can start using Data Templates to generate XML output for the RTF templates ?
Thanks
Tom... -
Upgrade Error when starting the DB ora-00201 control file version
Hi Experts,
While Upgrading R12.1.1 Vision database version from 11.1.0.7 to 11gR2on RHEL 6 64bit Plateform the following patches 've been applied successfully on apps tier
According to note ID: 1058763.1
Patch 7303030 , 9062910 , 8919489 - Oracle E-Business Suite Techstack 12.1.3 Product Release Update Pack ANd 9868229 - 10163753 - 11071569 -
9738085 - 9852070 - 12686610 - 6400501 Applied without any Issue.
On DB tier i.e 11.1.0.7 these patches are applied successfully According to metalink Note *[ID 1058763.1]*
Oracle Database Upgrade Guide 11g Release 2 (11.2) And Complete Checklist for Manual Upgrades to 11gR2 *[ID 837570.1]*
*7695070 - Change In The Timezone File Format*, And 13417321 -14112098 DST Changes For DSTV18 -7695070
Than we 've. Downloaded the 11.2.0.3 x86_64 software (of patch 10404530) Installed 11.2.0.3 on this Location /u01/oracle/VIS/db/tech_st/11.2.0.3
the Old ORACLE_HOME is /u01/oracle/VIS/db/tech_st/11.1.0.7
AND after that
On 11.2.0.3 home, applied these additional 11.2.0.3 RDBMS patches successfully according to metalink Nots Mentioned above :
*4247037 , 9858539, 3) 12942119 ,12960302 ,12985184 ,13001379,13004894 ,13258936 , 13366268,*
Now Need to Run utlu112i.sql on existing 11.1.0.7 oracle database.. for that started the listener But when i tried
to startup DB from sqlplus prompt. got this ora-00201 control file version error,
We Unable to start the Database in order to run the utlu112i.sql on existing 11.1.0.7 oracle database..
Please advise. we are doing manual upgrade.
Thanks
PriyaPlease verify the value of COMPATIBLE initialization parameter.
Troubleshooting ORA-201 ORA-202 [ID 948710.1]
OERR: ORA 201 control file version <num> incompatible with Oracle version <nu [ID 18286.1]
Thanks,
Hussein -
I have lightroom 5 and after I just tried to upload my wacom tablet 3 on laptop and, it's not compatable. I've tried to remove the Wacom program. Awindow box keeps apearing when I open lightroom it say tablet version mismatched and it completely closes my lightroom on me. What do I do??? I need my lightroom
Hi,
/Users/sarahschadek/Desktop/Safari.app/Contents/MacOS/Safari
Move the Safari app from the Desktop to the Applications folder.
Restart your Mac.
That's why you see this:
When I try to do the updates my computer says it has ready it goes through like it is downloading them then at the end it says some of the files could not be saved to "/" files.
After your restart your Mac, click the Apple menu (top left in your screen) then click: Software Update ...
Carolyn -
Excel 2013 - Locked file when trying to save
After a user opens an excel file from a personal network share (EMC/ISILON storage) and make changes to the file, the user get a FILE LOCKED BY <USER> (Same user that is currently editing the file).
We have also had issues where a user goes to open a file and it says it is currently in use by <USER> same user trying to open the file.
Couple of notes of interest:
These files are on personal network shares, only the 1 user has access to the files
We have had the user completely reboot their machine when they try to open a file and get the file is locked message - Same message
Does not happen with any other Office 2013 application
Are there any special "quick View" features in Excel 2013 or Windows 7 that may be locking the file? I have seen reference to this in older versions of Windows, but nothing for Windows 7.
Thanks for the help.Hi TE2011,
In regarding of the issue, please provide us more information to assist you better.
Did this issue only occur with the special user? Or some others had the same issue.
Did the issue only the special file?
This issue may be caused by some factors, please try the following methods and check they are helpful:
Method one:
Turn off the Preview Pane, Details Pane and pop ups that show information about file and desktop items
1. Right click on the Start Button.
2. Click 'Open Windows Explorer'.
3. At the top left click Organize > Layout
4. Uncheck Details Pane and Preview Pane.
5. On a Windows menu, click on Tools > Folder Options. In the box that opens up, click on the View tab. Scroll down the list to
“Show pop-up description for folder and desktop items” and clear the checkbox and then click OK.
In Excel:
1. Click File > Open
2. Click Organize > Layout
3. Uncheck 'Details Pane' and 'Preview Pane'
Reference:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx
We also try the other methods provided with the blog.
Method Two:
The issue also may be caused by the file itself, please try to recreated it and add it to trusted location.
If this issue still exists, please try to upload the screenshot about the error message. I'll appreciate for it.
Hope it's helpful.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
[Solved] sqlite3: SQLite header and source version mismatch
Is anyone else getting this error?
$ sqlite3
SQLite header and source version mismatch
2009-09-11 14:05:07 b084828a771ec40be85f07c590ca99de4f6c24ee
2012-03-20 11:35:50 00bb9c9ce4f465e6ac321ced2a9d0062dc364669
I just performed a full system upgrade
$ pacman -Syyu
I tried re-installing:
$ pacman -Rdd sqlite3
$ pacman -S sqlite3
I tried updating the shared library links (as suggested by a post):
$ ldconfig
None of the above steps helped...
$ pacman -Qs sqlite3
local/sqlite3 3.7.11-1
A C library that implements an SQL database engine
$ uname -a
Linux mdt3 3.2.13-1-ARCH #1 SMP PREEMPT Sat Mar 24 09:10:39 CET 2012 x86_64 AMD Opteron(tm) Processor 6128 AuthenticAMD GNU/Linux
Last edited by rWarrior (2012-04-25 21:03:38)Hi,
I've got the same problem...
SQLite header and source version mismatch
2011-06-23 19:49:22 4374b7e83ea0a3fbc3691f9c0c936272862f32f2
2012-03-20 11:35:50 00bb9c9ce4f465e6ac321ced2a9d0062dc364669
Can u tell me how to fix it? This occured when I've unpacked sqlite-autoconf-3071100.tar.gz, entered into unpacked directory with terminal and used commands:
./configure
make
sudo make install
sqlite3
As u've said before the problem is with libsqlite3.so... So i've searched it in File System. And the result is:
One file with name libsqlite3.so - /usr/local/lib
Two files with name libsqlite3.so.0 One is here - /usr/local/lib and another here - /usr/lib/i386-linux-gnu
Two files with name libsqlite3.so.0.8.6 One is here - /usr/local/lib and another here - /usr/lib/i386-linux-gnu
So... can u tell me which one to delete (in which folder)? What to do next? I am newbie... so if it's possible tell in little steps.
Thanks in advance.
Best wishes,
Teddy.
Last edited by TeddyRO (2012-04-27 19:57:18) -
Migmon: Lock file ExportMonitor.lck is locked during export
Hello,
I am trying to export my DB since I will move it to another system. I have done that before (2008) but not with Migration Monitor since I could not get it to work. At that time I could choose R3load-based method and everything went fine.
This time I don't have that option so I must try to fix my problem.
I have HP-UX 11.23 running on IA64.
If I try to run ./export_monitor.sh (or ./sapinst and skip the table splitting function) I get this result:
+ /opt/java1.4/bin/java -showversion -Xmx1024m -cp
./.:./migmon.jar:./activation.jar:./mail.jar com.sap.inst.lib.app.
SecureStartup -Xmx1024m com.sap.inst.migmon.exp.
ExportMonitor -dbType ORA
java version "1.4.2.17"
Java(TM) 2 Runtime Environment, Standard Edition
(build 1.4.2.17-071106-02:40)
Java HotSpot(TM) Server VM
(build 1.4.2 1.4.2.17-071106-08:12-IA64N IA64, mixed mode)
Another instance of application is already running.
Lock file 'ExportMonitor.lck' is locked by other process.
If I use the sapinst and set it to split the files I get "Lock file 'PackageSplitter.lck' is locked by other process.".
But the file is NOT used by another process!
I use root and yes the users SIDadm and oraSID are in the group sapinst and yes I have set the permissions to 777 and yes the umask is 022 and yes I have downloaded the latest migmon and decompressed it to these locations (I picked all three just in case):
tmp/sapinst_exe.13660.1280391575/JAR
tmp/sapinst_exe.13660.1280391575
/InstMst_701/IM_HPUX_IA64.
If you smart people know how to fix this I would be very happy and also impressed. I have no idea what to do and my message to SAP is still not answered...
Best regards Linus Hellsing
Edited by: Linus Hellsing on Jul 29, 2010 11:04 AMHi Peter, thank you for answering.
No, I have not done a fuser on the file. But I have tried to edit it and that works just fine.
I also have restarted the server, just in case.
But now when I am writing this something nice has happened.
On the server I am testing I have HP-UX 11.23 but my production servers have 11.31 so I tried to start the export on that server (scary). It seems to work!! Sadly I must export all of my systems but this makes me believe theat it is the OS that is old or don't have enough patches.
swlist on my old server tells me that I am missing a couple of patches compared to SAP Note 837670. I think I have to call the HP-UX department at my office... Um wait, that would be me since it is vacation season.... -
Locked files - Dreamweaver CS5.5
I had to erase my computer's hard drive, reinstall, and bring back my files from the backup drive. After doing so, Dreamweaver tells me all of my site files "is a locked file and can be viewed but not changed. What would you like to do with this file?"
Why are my files locked, and how can I get them unlocked?
Thank you in advance, for your help!
Dreamweaver CS5.5 Version 11.5 Build 5315
Mac OS 10.9.5We are restoring from a Time Machine backup to a Thunderbolt drive.
I checked and changed the preferences in finder, for the Dreamweaver site files, but had no luck.
I scoured the internet in search of a solution, while the Apple adviser I've been working with, was off for the weekend. I tried deleting the /user/Library/Application Support/Adobe/Dreamweaver CS5.5/en_US/Configuration/MacFileCache-C92F77BA.dat file. No difference. I even deleted the entire Configuration folder. It didn't make a bit of difference.
When Senior Apple Adviser, Korrie Smith, got back after her weekend off, she suggested going (in finder) to my user/documents folder and changing the preferences for the folder and everything in it, by selecting "Apply to enclosed items". And it worked! Dreamweaver is happy now! This also resolved the issues I was having with other applications.
Maybe you are looking for
-
I just bought an IBook G4 in perfect condition, but I cannot get it to connect to my wireless. The IBook came with all the original cables, CDs, Books and packaging.., Like I said perfect condition. It was sold as having Airport Extreme, but I don't
-
Is it possible to convert LabView data into OLE variant?
Hi. I'm using Activex Data Objects (ADO) to communicate with MySQL. Some ActiveX methods give OLE variant output, with "Variant Type" like "VT_ARRAY|VT_UI1", "VT_UI1" or "VT_BSTR". With some deduction and trial and error is relatively simple to extra
-
Form error in reusable workflow
Hi all I have taken a copy of the 'Approval - SharePoint 2010' workflow, and plan to customise it as a reusable list workflow. After publishing the workflow, and adding it to a list in my site, i am trying to start the workflow with an approver and
-
My problems started with the big grey multi-language box appeared asking to Restart computer appearing a couple of times – kernel panic? I just optimistically carried on. (What happened next may suggest my iPhoto software is damaged and that this res
-
Initiating a script from a created menu
Ok, I admit that I am a novice with JavaScript, although I have experience developing using Xcode with ObjC and lots of interapplication scripting with AppleScript. However, I am clearly missing some very basic concepts trying to do some very simple