VMWARE PLAYER - WIN 8.0 PRO VM setup hdd space to 35GB can expand to 45GB ... How

VMWARE PLAYER - WIN 8.0 PRO VM setup HDD space to 35GB can expand to 45GB ... How?
when set up this space eg in ubuntu 14.04 = around 5GB data of OS, and set HDD to 20GB - means: HDD captured space is only 5GB-Expanding when add files OR 20GB????

reply above - please answer:
win 8.0 pro VM should be OFF to change/extend its hdd space?
another Q
I INSTALLED WIN 8.0 PRO TO VMWARE AS GUESS OS VM
If buy touch screen for my host win 7 pro PC - can this work as well in VM GUESS OSs like win 8.0 pro or Ubuntu 14.04?
Message was edited by: lse123

Similar Messages

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

I enjoy karaoke and have numerous vcd's of karaoke songs. I wanted to make a compilation vcd of my own, containing my favourite karaoke songs but I am unable to achieve this on my macbook pro (mac os 10.6.8). Can anyone tell me how to step by step?

i enjoy karaoke and have numerous vcd's of karaoke songs. I wanted to make a compilation vcd of my own, containing my favourite karaoke songs but I am unable to achieve this on my macbook pro (mac os 10.6.8). Can you tell me how to step by step?

I had issues in 10.4.7 as well as 10.4.8.
My problems occurred at the beginning of 10.4.8, then many users brought light to me using WEP, which was not working that great. I changed my connections to WPA2 and my problem has disappeared. If my problem didn't resolve the way it did, I would have mentioned it the next time I visited an apple store.
The bottom line is that assumptions, complaining, and self diagnostics don't get many people very far and bringing the problem to apple helps them know the incidence of this problem, and helps them develop a reliable solution.
Though some users have reported the "cold shoulder" when reporting Airport problems to apple... I hope you weren't one of them.

I am new to Mac Pro but am purchasing one online. can anyone tell me how to get the information from my Toshiba onto the Mac. there are no stores in the state I live in. Do I need to find a location and will they do a transfer from my I Tunes etc?

I am new to Mac Pro and am purchasing one online tonight. Can anyone tell me how to get my information - Itunes, photos, and videos transferred onto the Mac from my Toshiba. the state I live in doesn't have an Apple store but I could take it to Minneapolis when I go. Any ideas where to begin?

You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

VMWare Player Pro Central Management?

If we use VMWare Workstation software installed on a server to create VMWare Player Pro restricted VMs and then we distributed those VMs to user's workstations, how could we manage those VMs at a console level without having to log into each user's workstations?
By joining the VMs to a domain and connected network, we can do remote management of the VMs in Windows via AD Group Policy and other tools, but does VMWare Workstation allow you to remotely connect to them at the console level and shutdown, power on and reconfigure the VMWare Player Plus VM "hardware?"
This topic first appeared in the Spiceworks Community

reply above - please answer:
win 8.0 pro VM should be OFF to change/extend its hdd space?
another Q
I INSTALLED WIN 8.0 PRO TO VMWARE AS GUESS OS VM
If buy touch screen for my host win 7 pro PC - can this work as well in VM GUESS OSs like win 8.0 pro or Ubuntu 14.04?
Message was edited by: lse123

BUG - client-side iPad keyboard in MRD 8.1.5 is mis-mapped for remote VMware Player console on Windows 8.1 Pro

Client system: iPad 4 running iOS 8.1.1
Client language/locale: US English
Client app: MRD 8.1.5
Server system: 64-bit Windows 8.1 Pro
Server language/locale: US English
Problem: client-side keyboard in MRD 8.1.5 does not work properly within VMware Player 6 console only
When interacting with VMs through the VMware Player 6 console app on the remote Windows 8.1 host, the client-side iPad keyboard for MRD 8.1.5 is not properly mapped. Letter keys and the top-row number keys send function keys or non-standard key scan codes
that aren't used by traditional PC keyboards. The spacebar sends the D key, and some keys send nothing at all. Many other keys work properly, including the client-side numeric keypad, and uppercase letters sent by using the Shift key (but not the iPad up-arrow
shift key). The only way to send the proper keystrokes to VMware Player from MRD 8.1.5 is to not use the client-side iPad keyboard and instead switch to the on-screen keyboard provided by the remote Windows server.
This problem only occurs within the VMware Player console app, and only with RDP connections that use the MRD 8.1.5 client on iOS. I do not encounter the problem with other iOS RD clients such as iFreeRDP by Thinstuff or Pocket Cloud Remote Desktop by Wyse.
Steps to reproduce:
Connect to Windows 8.1 Pro system from the MRD 8.1.5 client for iOS 8.1.1
Using the client-side iPad keyboard within MRD 8.1.5, bring up the Run dialog by typing Windows-R
Launch Notepad by typing notepad.exe in the Run dialog and pressing Enter on the client-side iPad keyboard
Type some sample text in Notepad until you're confident that the client-side iPad keyboard is functioning properly
Launch VMware Player 6 and start up a VM (mine was Windows Server 2008)
Open the sign-on prompt in the VM by sending Ctrl-Alt-Ins from the client-side keyboard or by pressing the Ctrl-Alt-Del icon in VMware Player
Touch or click in the password field in the VM to ensure it has keyboard focus
Using the client-side keyboard, try to type letters or numbers in the password field, and notice that dots generally do not appear for most keypresses
Switch to the server-side on-screen keyboard and delete the contents of the password field if it is not already empty
Use the server-side on-screen keyboard to sign on to the VM
Inside the VM, open Notepad or some other text editor
Enter text into the editor from both the client-side and server-side keyboards to verify that only the server-side keyboard is functioning properly within the VM
This issue is the only problem I'm having with MRD for iOS, and I hope it is resolved soon.
Thanks,
Fred

Client system: iPad 4 running iOS 8.1.1
Client language/locale: US English
Client app: MRD 8.1.5
Server system: 64-bit Windows 8.1 Pro
Server language/locale: US English
Problem: client-side keyboard in MRD 8.1.5 does not work properly within VMware Player 6 console only
When interacting with VMs through the VMware Player 6 console app on the remote Windows 8.1 host, the client-side iPad keyboard for MRD 8.1.5 is not properly mapped. Letter keys and the top-row number keys send function keys or non-standard key scan codes
that aren't used by traditional PC keyboards. The spacebar sends the D key, and some keys send nothing at all. Many other keys work properly, including the client-side numeric keypad, and uppercase letters sent by using the Shift key (but not the iPad up-arrow
shift key). The only way to send the proper keystrokes to VMware Player from MRD 8.1.5 is to not use the client-side iPad keyboard and instead switch to the on-screen keyboard provided by the remote Windows server.
This problem only occurs within the VMware Player console app, and only with RDP connections that use the MRD 8.1.5 client on iOS. I do not encounter the problem with other iOS RD clients such as iFreeRDP by Thinstuff or Pocket Cloud Remote Desktop by Wyse.
Steps to reproduce:
Connect to Windows 8.1 Pro system from the MRD 8.1.5 client for iOS 8.1.1
Using the client-side iPad keyboard within MRD 8.1.5, bring up the Run dialog by typing Windows-R
Launch Notepad by typing notepad.exe in the Run dialog and pressing Enter on the client-side iPad keyboard
Type some sample text in Notepad until you're confident that the client-side iPad keyboard is functioning properly
Launch VMware Player 6 and start up a VM (mine was Windows Server 2008)
Open the sign-on prompt in the VM by sending Ctrl-Alt-Ins from the client-side keyboard or by pressing the Ctrl-Alt-Del icon in VMware Player
Touch or click in the password field in the VM to ensure it has keyboard focus
Using the client-side keyboard, try to type letters or numbers in the password field, and notice that dots generally do not appear for most keypresses
Switch to the server-side on-screen keyboard and delete the contents of the password field if it is not already empty
Use the server-side on-screen keyboard to sign on to the VM
Inside the VM, open Notepad or some other text editor
Enter text into the editor from both the client-side and server-side keyboards to verify that only the server-side keyboard is functioning properly within the VM
This issue is the only problem I'm having with MRD for iOS, and I hope it is resolved soon.
Thanks,
Fred
I'm experiencing exactly the same problem. Is there a solution yet?

Win 8.1 PRO: Internet Explorer and integrated Adobe Flash Player no hardware acceleration on GMA

HI, i have a little problem with your latest release.
I have make a total update of the system today (win 8.1 pro 23 March 2014) and i saw that hardware decoding is not working on Internet explorer (the option is not available in the adobe tool: right click\settings)
How can i resolve?
Using Adobe Plugin+an other browser resolve this bug but i want to use IE
Another question: is coming a new version optimized for low-end video card? i have a gma 500 GPU and the performance are sufficient
Have a nice day

is coming a new version optimized for low-end video card?
Not likely, since the trend is to move to higher performance cards and not the toher way around.
As to the inability to access settings, that's in your browser, most likely ActiveX controls blocking it. There are two options:
1. Disable ActiveX controls: http://forums.adobe.com/thread/867968
2. Use the online settings manager: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html <--Choose from the links on the left of the page.

Lenovo T430 - VMware Player - Windows 7 - webcam is not working

Hi,
I have Windows7 and VMware PLayer.
Webcam is working fine on my Host - it is recognized as ThinkVantage Virtual Camera.
On WMware player webcam is not recognized.
I have tried such drivers on VMware player:
g1c814ww.exe - installed - but webcam is not working
grcu07ww.exe - error message on vmware: Not Supported
Saying honestly I need such driver (make a copy from my host): ThinkVantage Virtual camera
But I need *.INF files. Unfortunately on my Host system I have found only *.SYS files for these driver.
Does anybody know how to enable Integrated camera on WMware player?
Regards
Pawel

Hi Manish,
I've done this several times with Win 7 Pro. IIRC the procedure is to not try to activate during installation. Run the full install without a key. Reboot and attempt to activate. If that fails there should be a link or phone number offered that you can call for phone activation.
Here in the US anyway the calling the number gets you an automated activation process.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Issue with VMware player - trying to install Windows 7 on a virtual machine

I'm currently using the basic version of VMware player (not the pro version)
I create a new virtual machine. VMware player automatically detects my Windows 7 bit installation disc
in my attached CD/DVD drive.
in the next screen, i select my operating system version and fill in my windows license key
then there is a progress bar with the title "creating disc" which takes about 10 minutes to complete
after installation, the virtual machine launches.
It says (white on black background)
Network boot from Intel E1000
PXE-E53: no boot filename recived
PXE-M0F Existing Intel PXE Rom.
Operating system not found.
on the bottom of the virtual machine window it says "easy install is installing Windows 7 64 bit",
however my CD/DVD drive is not spinning and there is no progress leaving this alone for 30 minutes.
I then rebooted the Virtual Machine and went into the bios to update the boot order
with the CDrom 1st, then the hard drive and then the network.
I still get the same errors.
I also tried the same process with my Windows Xp installation disc, same issues
Any advice would be appreciated

Jmattson, good idea I'll try the manual install. user "aka", I did check the bios, intel virtualization is enabled.

Can't Install Win 8.1 Pro 64bit

Hi Guys,
I just purchase Win 8.1 Pro from the Microsoft Store (AUS). I have created a live usb (selected from the windows setup options) so that I could do a clean install of the OS on my laptop.
Each time that I have installed the OS (both clean or upgrade) it automatically installs the 32bit version. When I purchased the OS, it did not specify whether it was bit-specific, so I assumed it would include both bit versions, with an option to select
during the installation process.
I know my laptop is capable of running 64bit environment as my previous OS was Win 7 Ult 64bit.
Does anyone know what to do to either force the setup into installing 64bit, or any other method to get 64bit installed.
Cheers...

My understanding is that the download from Microsoft will be the same bitness as the OS you were running when you downloaded it.
I don't recall the mechanism, but I do believe with a little elbow grease it's possible to get a 64 bit Windows 8.1 download, as I recall reading another forum thread where someone had the same issue and ultimately solved it. Do some searching for
forum posts on this same subject; I'll bet you can turn up the information.
I wish I'd been able to help you more directly, but don't lose hope.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

How Do You Change the Remote Desktop Listening Port in Win 8.1 Pro

I am trying to setup two Win 8.1 Pro computers for Remote Desktop access on my local network. I can get Remote Desktop working fine on both when they are using the default RD port 3389. I am unable to change the listening port on one of the computers so
that I can access either via a public Internet connection. I change the listening port in the Registry, reboot the computer and verify that the port number has been changed BUT the computer still responds to the old port 3389 and can't connect via the new
port number. I added a Firewall rule for the new port, but that did NOT solve the problem.
I have followed the procedure below and verified in the Registry that the port is changed but the Remote Desktop remains accessible only on the default port 3389. The new port number in the Registry is 39699. I used a network scanner and it shows the computer
is still listening on port 3389 for Remote Desktop connections. Why is Win 8.1 Pro ignoring the new port number in the Registry and still responding on 3389? Is there another place in Win 8.1 Pro that the port also needs to be changed. I also added a new rule
in the Firewall to allow incoming requests on port 39699? This is a very frustrating problem, any suggestions are greatly appreciated.
I followed the procedure shown below.
Hi ,
Based on my test, we can change the listening port for Remote Desktop.
To change the port that Remote Desktop listens on, follow these steps.
1.Start Registry Editor.
2.Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\TerminalServer\WinStations\RDP-Tcp\PortNumber
3.On the Edit menu, click Modify, and then click Decimal.
4.Type the new port number, and then click OK.
5.Quit Registry Editor.
6.Restart the computer.
Meanwhile, please note, please type the new integer port number between 1025 and 65535 in the PortNumber text box.
And make sure the new port number is not in use by other application.
We may use the command below to check the result.
netstat -a
Also, we can use Network Monitor to trace the port.
Microsoft Network Monitor 3.4
Regards,

Hi,
There are two item that should be modified to change the default 3389 port:
One is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\Tds\tcp]. Modify the PortNamber to the one you want.
The other is: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro1Set\Control\Tenninal Server\WinStations\RDP\Tcp]. Modify the PortNumber to the one you want.
In your case, you missed the first one.
Regards
Wade Liu
TechNet Community Support

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Problem installing Free BSD 64-bit with VMware Player on Thinkpad W510

I installed VM Ware Player on the latest Thinkpad W510 with a 2.66ghz Intel processor. I am getting an error message indicating that the CPU doesn't support long mode. I was advised by the freenode #freeBSD channel that long mode is x86_64/amd64/emt64. This same channel also suggested that I tell vmware it was a 64bit guest. But I don't know how to do this. How do I do this? VMware Player didn't offer me any user options during the install. Is this something I should setup in the bios of the Thinkpad? Or something else? Is there more than one version of the VMware pLayer?

Look on BIOS if VT is enabled.
Best regards.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

[SOLVED] VMWare Player won't install

Hello,
I have a problem installing VMWare player on arch. (disclaimer: I have RTFM *and* searched and googled hehe)
I'm trying to install VMware-Player-2.5.1-126130.x86_64.bundle on the following machine:
Linux 2.6.29-ARCH #1 SMP PREEMPT x86_64 AMD Phenom(tm) 9850 Quad-Core Processor AuthenticAMD GNU/Linux
I was following the guide here: http://wiki.archlinux.org/index.php/Installing_VMware
and somewhat here: http://forums.fedoraforum.org/showthread.php?p=1126993
My problem is though when i run /usr/bin/vmplayer it complains that
Unable to build kernel module
See log file /tmp/vmware-root/setup-12218.log for details
and wont do anything else. I've basicly followed the guide I listed above in its steps so I'm a little lost now.
Any advice would be greatly appriciated as its for a university assigment im rapidly running out of time on heheh.
Regards,
Mike.
Last edited by DrMikeDuke (2009-04-05 16:50:59)

Thanks for your help so far, awesome!
I got it to work but a little differently since it still wouldnt patch for me
Anyhow Il post my solution here since i know I always hate visiting a
SOLVED thread only to find noone said HOW
So I move my file from binary to binary old
(mv /usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old)
then i go to my source directory
(cd /usr/lib/vmware/modules/source)
i untar everything in sight (:P)
[root@TOMATO source]# ls
vmblock-only vmci.tar vmnet-only vmppuser.tar
vmblock.tar vmmon-only vmnet.tar vmware-workstation-2.6.29-v2.patch
vmci-only vmmon.tar vmppuser-only vsock.tar
then I used the scripts from here http://communities.vmware.com//thread/203231
Finally I run step 6). vmware-modconfig --console --install-all
And done!:D

Trying to install Vmware Player on OEL and running into an error

All
I need to run a preconfigured Vmware VM on one of ours Enterprise Linux servers. I've already installed VMware-Player-3.13.*.bundle on the machine, no error message, but now when I try to run vmplayer I am getting the following message :
before you can run vmware, several modules must be compiled and loaded into the running kernel:
kernel headers 2.6.9-89.0.0.0.1ELxenU
kernel headers for version 2.6.9-89.0.0.0.1ELxenU were not found...
Any help would be appreciated.
Thanks and regards
Anil

Thanks Avi for the pointer.
I did a 'sudo -su ' and ran 'rpm -ivh kernel-xenU-devel-2.6.9-89.0.0.0.1.EL.i686.rpm' and it went through successfully.
But then when I launched VMPlayer, a popup came up saying " Before you run VMWare, several modules must be compiled and loaded into the running kernel.". I clicked on 'Install' to continue.
Another popup came up saying "Failed to run /usr/bin/vmware-gksu '/usr/bin/vmware-modconfig' --icon='vmware-player' --appname='VMware' --gcc='/usr/bin/gcc' --headers='/lib/modules/2.6.9-89.0.0.0.1.ELxenU/build/include' --gcc-ignore-minor as user root. Failed to exec new process. No such file or directory."
And then I had to exit.
This is the log contents when VMPlayer was run :
Dec 01 18:27:11.567: app-3086636736| Log for VMware Workstation pid=11013 version=7.1.3 build=build-324285 option=Release
Dec 01 18:27:11.567: app-3086636736| The process is 32-bit.
Dec 01 18:27:11.567: app-3086636736| Host codepage=UTF-8 encoding=UTF-8
Dec 01 18:27:11.567: app-3086636736| Logging to /tmp/vmware-vmotamar/setup-11013.log
Dec 01 18:27:11.944: app-3086636736| modconf query interface initialized
Dec 01 18:27:11.945: app-3086636736| modconf library initialized
Dec 01 18:27:11.979: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:11.989: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.011: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.036: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.058: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.104: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.108: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.113: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.117: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.121: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.146: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.150: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.154: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.158: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.162: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:12.168: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:12.184: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:19.720: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.725: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.729: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.733: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.738: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.745: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:19.764: app-3086636736| Your GCC version: 3.4
Dec 01 18:27:19.807: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.812: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.817: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.822: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.827: app-3086636736| Trying to find a suitable PBM set for kernel 2.6.9-89.0.0.0.1.ELxenU.
Dec 01 18:27:19.827: app-3086636736| Relaunching with /usr/bin/vmware-gksu '/usr/bin/vmware-modconfig' icon='vmware-player' appname='VMware' gcc='/usr/bin/gcc' headers='/lib/modules/2.6.9-89.0.0.0.1.ELxenU/build/include' --gcc-ignore-minor
Could you please suggest?

VMWARE PLAYER - WIN 8.0 PRO VM setup hdd space to 35GB can expand to 45GB ... How

Similar Messages

Maybe you are looking for