Vmware Problems with kernel26beyond
Hi folks,
I have two problems with vmware-server from AUR, but only with the beyond kernel. On the stock kernel vmware runs without problems.
I added vmware to daemons in rc.conf. I ran vmware-config.pl. But everytime I want to start vmware (under beyond kernel) I get this:
vmware is installed, but it has not been (correctly) configured
for this system. To (re-)configure it, invoke the following command:
/usr/bin/vmware-config.pl.
After deleting /etc/vmware/not_configured I can start the vmware-server until the next reboot (then I have to delete it again).
But the major problem is an other thing. Wether I want to start my virtual machine (Windows 2000) I get an error too, but I couldn't find out a workaround.
Unable to change virtual machine power state: The process exited with an error:
End of error message.
With the stock kernel no issue.
Can anyone help me?
greetings
SuiRIS
ratur wrote:
tomk wrote:My guess is you don't have the vmmon and vmnet modules for the beyond kernel, only for kernel26. Get vmware-server-modules from the AUR, change the _kernver variable to 2.6.19-beyond, and build.
That worked for me
For me too! Thanks tomk, you are my hero
Similar Messages
-
VMware problems with kernel26-ck
I installed vmware-server 1.0.1_29996-3 and the modules for the 2.6.19-ck kernel, configured it and receive an error when I start vmware:
[sigi@arch ~]$ vmware
terminate called after throwing an instance of 'std::length_error'
what(): basic_string::_S_create
/usr/lib/vmware/bin/vmware: /usr/lib/vmware/lib/libpng12.so.0/libpng12.so.0: no version information available (required by /usr/lib/libcairo.so.2)
/usr/lib/vmware/bin/vmware: /usr/lib/vmware/lib/libpng12.so.0/libpng12.so.0: no version information available (required by /usr/lib/libcairo.so.2)
vmware: xcb_lock.c:62: _XGetXCBBuffer: Assertion `((int) ((xcb_req) - (dpy->request)) >= 0)' failed.
Loading of the module seem to work...
Any ideas?
Cheers SigiI don't know what causes this problem. I have tested VMware Server with the standard and the beyond kernel and it works as standard user. No vmware group is needed. Have you tried another kernel?
After a little bit googling I have found this forum thread:
http://www.vmware.com/community/thread. … adID=56646
I don't know if it helps. -
VMWare problems with Kernel 2.6.30
I'd appreciate it if someone could help me with this issue:
I recently installed the latest Kernel of arch 2.6.30, and have tried installing VMware and constantly run into a problem with the vmmon and not being support for the kernel.
I have tried installing VMware Workstation 6.5.2 and VMware Workstation 6.5.3
I am sure I could use any other open source products but I have been using VMware in windows so would like to be able to keep those VMsAccording to the "Installing VMWare" page on the Wiki (http://wiki.archlinux.org/index.php/Installing_VMware) you have to do this:
sudo mv /usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old
sudo vmware-modconfig --console --install-all -
3.2.8-1-ARCH on vmware problem with open-vm-tools 2011.12.20-2
Hi all!
I've got problem with starting :
/etc/rc.d/open-vm-tools start
error is:
Error inserting vmblock (/lib/modules/3.2.8-1-ARCH/extramodules/vmblock.ko.gz): Invalid module format
and dmesg says:
vmblock: disagrees about version of symbol module_layout
I've searched google and this forum and found nothing please help.I've found the same solution about hour ago here is the link
https://bbs.archlinux.org/viewtopic.php?pid=1057886
I had different errors than in this post but the solution works fine. Topic can be closed now. -
Problem with vmware fusion 3.1.3 after upgrade to Lion
Greetings,
I have some problems with my vmware fusion 3.1.1 after my update to OS X v10.7.
i used a MacBook pro 17'' half a year old.
I used VMWare Fusion 3.1.3 and bootcamp to. I have make no backup bevore i upgrade.
The path of my virtual machine couldn't be found and so the virtual maschine didn't start after this upgrade.
I hope that i musn't reinstall my virtual Windows 7 machine.
I'am searching for a resulution and found this:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003483
Cannot open the disk '/Users/<User Name>/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/dev/disk0s3/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.
But i would save the virtual machine bevor i reinstall VMWare Fusion 3.1.3.
Have anyone a idea how i found my virtual machine.
Greetings from Germany
KimAccording to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.
-
Problem with vmware server 1.0.10 and usb mounting into guest
Hi, I really ve a serious problem here because I ve some reason that I need to use vmware sv 1.0.10 with windows 7 64bit pro as the host and win xp pro sp3 as guest os .... now i can installed vmware on my win 7 with pressing F8 then disble driver signature technique and I also sign vmware driver with win7 using some tool...
However, my problem is that i cant mount USB flash drive into the guest... it just show me my flash drive's name at the toolbar>>removable device>>usb but when i click on it.. nothing happen .. and after that when i check vmware log I've found that my vmware saw my flashdrive normally as it should be... i really ve no idea how to solve this....
I also tried set .vmx config with many methods but nth can help me...
Ps. I know that vmware server may b ve a big issue with win7 compatible things but i do really need to make this version of VM working with my usb flashdrive... plz help me.. Thank you guys all:)))Hi creamac,
Welcome to communites
Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
will find that on right hand corner above to task bar of host machine .
"Nature always wears the colors of the spirit." -
W530 Num Lock problems with VMWare
All, I am having a major problem with VMWare and the W530 "Num Lock". When I move the cursor into the VMWare window a message comes on say "NUM LOCK: ON" when I move it out of the VMWare window I see message "NUM LOCK: OFF". I do not have any key on the keyboard to disable Num Locl. There are utilities I can run in the SUSE VMWare image to capture the key binding and remap, but I do not have anyway of turning Num Lock on or off to capture
the key binding.
Suggestions ?
Solved!
Go to Solution.Hello and welcome,
A couple of things you might try. Don't know if they'll work on your W. They do work on some other Lenovo machines.
Plug in a USB keyboard that has numlock. Use that and see if it sticks after reboot.
Use the on-screen keyboard. Click "options" and enable numeric keypad. That should add a keypad and NUMLOCK key to the on-screen keyboard. Use that. See if it works - and if it sticks.
(Windows 7) Start -> Accessories -> Ease of Access -> On-Screen Keyboard.
A little more detail here: http://www.beezmo.com/geezblog/?p=259
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Network problems with Oracle Linux 5.7 on Vmware ESX 4.1
We recently installed Oracle Linux 5.7 64 on Vmware in order to run OVM Manager 3.02. The VM experiences random frequent network connectivity problems. There are no errors showing up in the network stats. The Vmware environment hosts many production VMs with no issues. We did have some trouble configuring Vmware tools with the uek kernel, so we booted the vm with the base kernel and we were then able to configure Vmware tools with no problems. We have tried running the VM on two different ESX servers with no improvement.
The network connectivity problems persist even with the base kernel. We get random ping failures into and out of the VM, and random disconnects of ssh terminal sessions.
I am not very experienced with linux, being primarily a vmware and aix admin. Any tips on stabilizing Oracle Linux on Vmware are greatly appreciated otherwise, I will have to beg for a new server to host the OVM manager.
Thanks,
BobThe network connectivity problems persist even with the base kernel. We get random ping failures into and out of the VM, and random disconnects of ssh terminal sessions.Before you check on software and driver updates you might want to check your hardware settings. I've seen problems like this before when using a bad network cable or having a duplex mismatch. The later can happen when changing from a router to a network switch and configuring the switch for fixed full duplex. Depending on which end you sit you won't even see any network errors, but packages will disappear depending on traffic. Make sure you have set server's NIC and network switch port to the same topology ie. fixed or auto-negotiate, but not mixed. You can use the "ethtool" on the Linux system to verify the current settings.
-
Problems with vmware module and Xorg
Hello everybody!
Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
http://pastebin.com/f8gwbdcb
[ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
[ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
[ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
[ 979.411] (EE) No drivers available.
[ 979.411] (EE)
[ 979.411] (EE) no screens found(EE)
[ 979.412] (EE)
[ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 979.413] (EE)
If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
4 Desktop
0 /usr/lib/xorg/modules/drivers/ark_drv.so
0 /usr/lib/xorg/modules/drivers/ast_drv.so
0 /usr/lib/xorg/modules/drivers/ati_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
0 /usr/lib/xorg/modules/drivers/dummy_drv.so
0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
0 /usr/lib/xorg/modules/drivers/glint_drv.so
0 /usr/lib/xorg/modules/drivers/i128_drv.so
0 /usr/lib/xorg/modules/drivers/intel_drv.so
0 /usr/lib/xorg/modules/drivers/mach64_drv.so
0 /usr/lib/xorg/modules/drivers/mga_drv.so
0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
0 /usr/lib/xorg/modules/drivers/nv_drv.so
0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
0 /usr/lib/xorg/modules/drivers/r128_drv.so
0 /usr/lib/xorg/modules/drivers/radeon_drv.so
0 /usr/lib/xorg/modules/drivers/savage_drv.so
0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
0 /usr/lib/xorg/modules/drivers/sis_drv.so
0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
0 /usr/lib/xorg/modules/drivers/trident_drv.so
0 /usr/lib/xorg/modules/drivers/v4l_drv.so
0 /usr/lib/xorg/modules/drivers/vesa_drv.so
0 /usr/lib/xorg/modules/drivers/vmware_drv.so
0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
Thanks!Hello everybody!
Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
http://pastebin.com/f8gwbdcb
[ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
[ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
[ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
[ 979.411] (EE) No drivers available.
[ 979.411] (EE)
[ 979.411] (EE) no screens found(EE)
[ 979.412] (EE)
[ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 979.413] (EE)
If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
4 Desktop
0 /usr/lib/xorg/modules/drivers/ark_drv.so
0 /usr/lib/xorg/modules/drivers/ast_drv.so
0 /usr/lib/xorg/modules/drivers/ati_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
0 /usr/lib/xorg/modules/drivers/dummy_drv.so
0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
0 /usr/lib/xorg/modules/drivers/glint_drv.so
0 /usr/lib/xorg/modules/drivers/i128_drv.so
0 /usr/lib/xorg/modules/drivers/intel_drv.so
0 /usr/lib/xorg/modules/drivers/mach64_drv.so
0 /usr/lib/xorg/modules/drivers/mga_drv.so
0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
0 /usr/lib/xorg/modules/drivers/nv_drv.so
0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
0 /usr/lib/xorg/modules/drivers/r128_drv.so
0 /usr/lib/xorg/modules/drivers/radeon_drv.so
0 /usr/lib/xorg/modules/drivers/savage_drv.so
0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
0 /usr/lib/xorg/modules/drivers/sis_drv.so
0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
0 /usr/lib/xorg/modules/drivers/trident_drv.so
0 /usr/lib/xorg/modules/drivers/v4l_drv.so
0 /usr/lib/xorg/modules/drivers/vesa_drv.so
0 /usr/lib/xorg/modules/drivers/vmware_drv.so
0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
Thanks! -
Firefox 6.0.2 keeps on crashing, problems with ajax calls
Hi,
I am using the jquery form plugin to make ajax calls on my sites, when i invoke the plugin and have Firebug open I get this message:
Could not convert JavaScript argument arg 0 [nsISupports.QueryInterface]
[Break On This Error] callback.data = aElem....getComputedStyle(callback.data, '');
rfhelper32.js
Firebug also tells me that it's limit has been reached 1571 entries shown.
Can someone tell me why this is happening; is there a problem with Firefox that will be fixed. It's not happening in IE9
Here is the information from a recent crash report (which may or not be related to the above problem!)
AdapterDeviceID: 0a66
AdapterVendorID: 10de
Add-ons: [email protected]:3.0.4,{6AC85730-7D0F-4de0-B3FA-21142DD85326}:2.5.5,{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}:0.17,{e968fc70-8f95-4ab9-9e79-304de2a71ee1}:0.7.3,{f36c6cd1-da73-491d-b290-8fc9115bfa55}:2.2.0,{BBDA0591-3099-440a-AA10-41764D9DB4DB}:3.1,[email protected]:1.8.2,{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}:2011.7.1.3,{972ce4c6-7e08-4474-a285-3208198ce6fd}:6.0.2
AvailableVirtualMemory: 174600192
BuildID: 20110902133214
CrashTime: 1316093326
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1315406279
Notes: AdapterVendorID: 10de, AdapterDeviceID: 0a66, AdapterDriverVersion: 8.16.11.9104
D3D10 Layers? D3D10 Layers-
D3D9 Layers? D3D9 Layers-
WebGL? WebGL-
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 160793
StartupTime: 1316067225
SystemMemoryUsePercentage: 86
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
URL: https://s-static.ak.fbcdn.net/connect/xd_proxy.php?version=3#cb=f1ae6be54ac01b4&origin=https%3A%2F%2Fwww.paypal-business.co.uk%2Ffd558408b2cb6c&relation=parent.parent&transport=postmessage&type=resize&height=20&ackData[id]=1&width=250
Vendor: Mozilla
Version: 6.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{91C733AA-510D-41D3-B67A-4441103BAE50}] SEQPACKET 1 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{91C733AA-510D-41D3-B67A-4441103BAE50}] DATAGRAM 1 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] SEQPACKET 5 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] DATAGRAM 5 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] SEQPACKET 7 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] DATAGRAM 7 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] SEQPACKET 8 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] DATAGRAM 8 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] SEQPACKET 6 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] DATAGRAM 6 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{3D95D40E-1835-44C6-A621-968094D90452}] SEQPACKET 10 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{3D95D40E-1835-44C6-A621-968094D90452}] DATAGRAM 10 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D6AD3B6C-2F8E-49B4-BDCD-DB35518116E7}] SEQPACKET 9 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D6AD3B6C-2F8E-49B4-BDCD-DB35518116E7}] DATAGRAM 9 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{18908ACF-76C1-4139-8C1C-89DF049156C5}] SEQPACKET 4 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{18908ACF-76C1-4139-8C1C-89DF049156C5}] DATAGRAM 4 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4112C824-372C-4014-87AE-1BC13EA6E4CD}] SEQPACKET 3 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4112C824-372C-4014-87AE-1BC13EA6E4CD}] DATAGRAM 3 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2E408326-9611-4C41-B766-C4CB82734986}] SEQPACKET 0 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2E408326-9611-4C41-B766-C4CB82734986}] DATAGRAM 0 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{91C733AA-510D-41D3-B67A-4441103BAE50}] SEQPACKET 2 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{91C733AA-510D-41D3-B67A-4441103BAE50}] DATAGRAM 2 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
VMCI sockets DGRAM : 0 : 2 :
VMCI sockets STREAM : 0 : 1 : C:\Program Files\VMware\VMware Workstation\vsocklib.dll
This report also contains technical information about the state of the application when it crashed.Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Duplex printing problem with hp 9500 (right side always just half printed)
Since OS X 10.6 was released there is a problem with the print out of duplex printed pages (specially via Indesign CS4 broschure printing function). Using Mac OS X 10.5.8 with old and new driver everything is fine - but under 10.6, 10.6.1 or 10.6.2 neither old nor one of the new driver releases 2.1, 2.2 or 2.3 will work.
When I´m trying to print a duplex printing page the print of the right page will be cutted off at the half of the page - like the page would not print A3 horizontally but vertically (so the rest is cut off). The new print features within the printing menu (manual duplex print and print broschure will have same effect but with a strange miniaturization to A5 - although it should be A4). All in all the is no way to print out a duplex printing with OS X 10.6 and hp 9500. Will there be any solution in sight? Are there other with the same effect?I have an identical issue to neuegestaltung, but with an HP 5500. I can print single-sided to A3/tabloid successfully but when I try printing duplex the right quarter of the page is cut off on both sides - almost as if it thinks it's printing portrait.
Applications affected include Adobe Acrobat 8 and 9, Adobe CS3 and CS4 applications including InDesign.
Preview works fine, but of course the colour balance makes the output unusable.
OS 10.6.2, print driver HP Color LaserJet 5500 v 3010.107.
Using the Gutenprint driver I can't either do A3 or colour so there is no solution there.
Worked fully and correctly with the same apps under 10.5.x.
At the moment I am running Windows XP under VMWare to print from Acrobat, which is plainly silly.
Any useful* observations, suggestions or workarounds welcome.
*Needless to say, "It's Adobe's problem" or similar are not acceptable responses. It may well be an interaction between the Adobe's applications and Apple's printing system and/or driver of course; in that case the companies need to collaborate to solve the issue. -
Problem with the new server UCS C220 for set IP to CIMC
Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regardsYou may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help -
Problem with Quadro4000 in a Mac Pro (Mid 2009)
Does anyone has a problem with the Nvidia Quadro 4000 on his Mac Pro?
I have a major problem, it can't boot to start up the computer, I must to hold the shift button to open and when it opens it sticks and the colors of the wallpaper is not good. Also I have a raid card. The apple service told me that the problem is the graphic card and must be replaced but I am not sure about it, unfortunately I don't have the first card to be sure.
Do you know what the follow message means?
Interval Since Last Panic Report: 3378 sec
Panics Since Last Report: 2
Anonymous UUID: 109D6AB4-796F-DAB1-788B-3CEBA562D0BE
Thu Sep 19 19:20:19 2013
panic(cpu 0 caller 0xffffff8019ab8945): Kernel trap at 0xffffff7f9b214d66, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008c, CR3: 0x000000000e72a000, CR4: 0x0000000000000660
RAX: 0x0000000000000000, RBX: 0x0000000000000006, RCX: 0x0000000000000005, RDX: 0x0000000000003c00
RSP: 0xffffff81eb423280, RBP: 0xffffff81eb423280, RSI: 0x0000000000000005, RDI: 0xffffff803a7d1400
R8: 0x0000000000000000, R9: 0xffffff803d4facb8, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x0000000000000004, R13: 0xffffff81ba18f000, R14: 0xffffff81ba1a2938, R15: 0xffffff803a7d1400
RFL: 0x0000000000010206, RIP: 0xffffff7f9b214d66, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008c, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb422f20 : 0xffffff8019a1d636
0xffffff81eb422f90 : 0xffffff8019ab8945
0xffffff81eb423160 : 0xffffff8019acebfd
0xffffff81eb423180 : 0xffffff7f9b214d66
0xffffff81eb423280 : 0xffffff7f9b1f6cec
0xffffff81eb4232d0 : 0xffffff7f9b2252ff
0xffffff81eb423700 : 0xffffff7f9b1d5c80
0xffffff81eb423730 : 0xffffff7f9b2291dd
0xffffff81eb4237b0 : 0xffffff7f9b210460
0xffffff81eb423810 : 0xffffff7f9b210d41
0xffffff81eb423860 : 0xffffff7f9b211294
0xffffff81eb4238d0 : 0xffffff7f9b211a53
0xffffff81eb423910 : 0xffffff7f9b1dcedf
0xffffff81eb423a90 : 0xffffff7f9b20df8f
0xffffff81eb423b50 : 0xffffff7f9b1db978
0xffffff81eb423ba0 : 0xffffff8019e6f789
0xffffff81eb423bc0 : 0xffffff8019e70d30
0xffffff81eb423c20 : 0xffffff8019e6e74f
0xffffff81eb423d70 : 0xffffff8019a98c21
0xffffff81eb423e80 : 0xffffff8019a20b4d
0xffffff81eb423eb0 : 0xffffff8019a10448
0xffffff81eb423f00 : 0xffffff8019a1961b
0xffffff81eb423f70 : 0xffffff8019aa6546
0xffffff81eb423fb0 : 0xffffff8019acf473
Kernel Extensions in backtrace:
com.apple.GeForce(8.1.6)[0E3D8776-A5B7-3D82-9BFD-9188170B358D]@0xffffff7f9b1c90 00->0xffffff7f9b296fff
dependency: com.apple.NVDAResman(8.1.6)[EA4F9902-5AAE-3F1D-A846-3796221C8C91]@0xffffff7f9a1 79000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f9a165000
dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f9a0df000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f9a122000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12F37
Kernel version:
Darwin Kernel Version 12.5.0: Mon Jul 29 16:33:49 PDT 2013; root:xnu-2050.48.11~1/RELEASE_X86_64
Kernel UUID: B1B58405-A2B2-3C44-B25D-495053D52AB5
Kernel slide: 0x0000000019800000
Kernel text base: 0xffffff8019a00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 213721035844
last loaded kext at 35243841547: com.apple.driver.AppleBluetoothHIDKeyboard 170.2.4 (addr 0xffffff7f9b9f9000, size 24576)
last unloaded kext at 96410920956: com.apple.driver.AppleUSBXHCI 630.4.5 (addr 0xffffff7f9aa9b000, size 118784)
loaded kexts:
com.nvidia.CUDA 1.1.0
com.vmware.kext.vmnet 3.0.0
com.vmware.kext.vmioplug 3.0.0
com.vmware.kext.vmci 3.0.0
com.vmware.kext.vmx86 3.0.0
com.apple.driver.AppleBluetoothMultitouch 75.19
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.1.7f2
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AGPM 100.13.12
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.4.7fc2
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.GeForce 8.1.6
com.apple.driver.AppleMikeyDriver 2.4.7fc2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.AppleUSBHub 623.4.4
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.Intel82574L 2.3.0b5
com.apple.driver.AirPort.Brcm4331 615.20.17
com.apple.driver.AppleRAIDCard 304
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.2.4
com.apple.driver.AppleMultitouchDriver 237.4
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOSurface 86.0.4
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.4.7fc2
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.nvidia.gf100hal 8.1.6
com.apple.NVDAResman 8.1.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f2
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc2
com.apple.iokit.IOHDAFamily 2.4.7fc2
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d11
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.driver.IOBluetoothHIDDriver 4.1.7f2
com.apple.iokit.IOBluetoothFamily 4.1.7f2
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IO80211Family 530.5
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOSCSIParallelFamily 2.5.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.6
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IOUSBFamily 630.4.5
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.93 GHz, 16 GB, SMC 1.39f5
Graphics: NVIDIA Quadro 4000, NVIDIA Quadro 4000, PCIe, 2048 MB
Memory Module: DIMM 1, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 2, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 3, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 4, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 5, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 6, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 7, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
Memory Module: DIMM 8, 2 GB, DDR3 ECC, 1066 MHz, 0x80AD, 0x484D54313235553741465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.17)
Bluetooth: Version 4.1.7f2 12718, 3 service, 21 devices, 5 incoming serial ports
Network Service: LINKSYS WAG320N, AirPort, en2
Network Service: Ethernet 2, Ethernet, en1
PCI Card: NVIDIA Quadro 4000, sppci_displaycontroller, Slot-1
PCI Card: NVIDIA Quadro 4000, NVDA,Parent, Slot-1
PCI Card: pci1033,194, Slot-3
PCI Card: Apple RAID Card, sppci_raid, Slot-4
Serial ATA Device: Optiarc DVD RW AD-7240S
Serial ATA Device: Optiarc DVD RW AD-7240S
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd500000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd530000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd520000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 5
USB Device: Smart-UPS 2200 FW:654.19.I USB FW:7.4, 0x051d (American Power Conversion), 0x0002, 0x1d100000 / 2
USB Device: PTK-840, 0x056a (WACOM Co., Ltd.), 0x00ba, 0x3d100000 / 2
FireWire Device: built-in_hub, 800mbit_speed -
Installation problems with Windows
Hi,
I have the windows 7 beta and have been trying to reinstall it on my boot camp partition, however the installation continually reports a corrupt CD. I know that the CD is not corrupt because i have successfully installed Win7 beta on a boot camp drive before and on other computers. I have even tried on VMware and had the same error. The things that strikes me the oddest problem is that it always has the error at the same point of the installation e.g. 97% of expanding files. I have also tried installing a working Vista OS on boot camp and WMware and still had the same error. This leads me to believe a problem with the iMac's SuperDrive. I have run tests using tech tool pro and drive genius and had no anomalies. Any further steps to diagnose or a solution would be helpful, thank you.I don't know about using Windows 7 Beta with Boot Camp. You may want to post that question in the category for Boot Camp.
http://discussions.apple.com/category.jspa?categoryID=237
However, I have messed around with using Windows 7 Beta under VMware Fusion. It works, with some graphical anomalies when the virtual machine is starting up. When I install a new OS into a VMware Fusion virtual machine, I always use the option to install from a disk image file, instead of a physical disc. That would avoid any issues you have there with your physical disc.
To do so, click the New button and then +Continue without disk+. Then +Use operating system disk image file+ and select the disk image file. In your case, that would be the Window 7 Beta .iso file that you downloaded. I told the VMware Fusion I was installing Windows Vista.
(Incidentally, I am using the 64-bit version. If your iMac is Core 2 Duo, you can. Don't know if that you make a difference in the Beta working or not working.)
To test the drive itself, you may want to start up from your Mac OS X installation disc and get to the Installer. From there, you can try running Disk Utility from the Utilities menu. While you are there in Disk Utility booted off another system, you might as well run a +Repair Disk+ in your startup volume. Then restart normally and try playing a DVD movie. If everything works, the optical drive is probably OK. -
Reader 9 - problem with pdf version 1.0 and descenders
2 big problems over here:
* Reader9 will not properly open files created as pdf version 1.0/1.x
all text is cut off about 2/3 of the way down, whether or not in fields.
* Any pdf file version above 1.0created with any version of GhostScript does not have the previous issue, However - no descenders of any font are coming out.
We do not have either problems with any version of Reader prior to 9Hi creamac,
Welcome to communites
Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
will find that on right hand corner above to task bar of host machine .
"Nature always wears the colors of the spirit."
Maybe you are looking for
-
How do I download music from my PC to the I phone 5
I find nothing in the tutorials or user manuel for downloading from your PC to the Iphone5. All it talks about is BUYING from ITunes.
-
Windows 7 Firefox 28.0 Adobe Acrobat 9 Pro (my default PDF viewer) I have the browser set to display PDF's: "Use Adobe Acrobat in Firefox." This works fine for a while, then it stops working. I get a white page instead with a pop-up window: "Adobe Ac
-
How to limit the number of blog posts showing?
Hi there guys... Just wondering - how do you limit the number of blog posts showing on a main blog post summary page? I want it to show say 5 recent posts, not 15. Cheers, Dave
-
How is Default Char encoding for WebLogic determined ?
How is the defualt char encoding for a Weblogic server determined? We have two environments each running Weblogic 5.1 sp8 on Solaris 7. One is production,other is for testing. For testing german characters I use a TestGlobal.jsp to read parameters us
-
The chromatic aberration slider in the Lens Correction panel in Camera Raw 6.7 (PS CS5) has disappeared. Must I re-download again, or? If I do, should I uninstall what is on the computer now? I use a Mac. Robert C. Tanner