VMware server Console -- not the web based access

Dear All,
I want to install vmware server console to do Oracle RAC practice, So kindly let me know from where can I get the exe file to install it.
FYI , I installed Vmware server version2.0.2 but it's ( Web access infrastructure ) , and I don't want this version , I need the other one which it's an application not the web based.
Regards

Please have a look..
http://www.petri.co.il/virtual_install_vmware_server.htm
abirhasan

Similar Messages

Problem Starting the Web-Based Administrative Console

I have Installed Application Server 7 Platform Edition. Everything runs smooth. The Application Server and the Administrative Server got started perfectly. I checked both of these Servers and they are working perfectly.
The problem is that when trying to connect to the Web-Based Administrative Console.
I get the prompt to enter the Admin username and the password, once I have entered, it accepts but through the following message.
�Your Sun One Application Server License does not allow Remote Administration.
Please go to http://www.sun.com/upgradeas7 to upgrade your license.�
How can this happen because I am using the same machine where Application/Administrative Servers are running to get connected to Web-Based Administrative Console.

Hi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya.

Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

How do I access the web-based utility

I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.

Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

Registering the Web based application as a Partner Application

Good day
I went through the suggested documentation of registering a
web based application as a partner application of the SSO Login Server.
I installed the SSOSDK.JAR and went through the demo application (JSP Demo)
which consists of the following programs :
papp.jsp
ssoinclude.jsp
ssoEnablerJspBean
SSOEnablerBean
SSOSignon
As per the technical documentation,I register this demo application as a
partner application.
1 - The source code of the papp.jsp checks for the existence of the user
through method of ssoEnablerJspBean [getSSOUserInfo(request, response)] which
calls method of SSOEnablerBean [getSSOUserInfo (request, response) and this
method calls getUserInfo(p_request) of SSOEnablerBean (the same program) to
check the existence of the application cookie.
2 - If it doesn't exit , it redirect it to the SSO Login page for user
authentication.Once the user is authenticated, a SSO login cookie is created on
the client's browser and redirects back to the SSOSignOn.
3 - The SSOSignOn program creates the application cookie and redirects back to
the entry point of the demo application which is papp.jsp.
My Questions are as follows :
1 - Instead of creating a session object within my web based application to hold some
information used between the different pages, can I define them in the
application cookie? kindly advise? Is there any limitation for the length of
the application cookie? If yes, what will be the risk?
2 - The SSOSignOn program is calling a method in the SSOEnablerBean
[setPartnerAppCookie(response, request). Within this method , it is retrieving
the parameters values of the request object as :
request.getParameterValues("urlc")[0];
What is the role of this [urlc]? Is it hard coded? Can I change it?
3 - In order to ensure that I am still dealing with the same user, shall I put
the above security check procedure on each page of my weeb based application? Kindly advise?
Thanks in advance for your prompt feedback
regards

Dear Paul
I think there is a misunderstanding regarding the last correspondence.
I am talking about the customized home page of the PORTAL and not the home page of my web based application (JSP) .So in this case, Am I able to use the customized home page which contains a login portlet instead of the default Login page of the SSO Login Server.Kindly advise!!!
On the other hand, I am facing a problem during the surfing of the web based application.
The web based application consists mainly of two packages :
Package I : Bank.counter which contains a set of jsp pages.
JSP_HOME_COUNTER (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER_DETAIL
Package II : Bank.portfolio which contains a set of jsp pages.
JSP_HOME_PORTFOLIO (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_PORTFOLIO
JSP_MAIN_FRAME_PORTFOLIO
Please note that the SSO classes are residing under the first package.
As agreed on in the third question, I am including in each page of my web based application, a security check procedure as follows :
<%@ include file="ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Please note that all the jsp page of the portfolio package are pointing to the SSO classes as follows :
<%@ include file="../counter/ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Once I invoke the JSP_HOME_COUNTER , it will render the JSP_LEFT_FRAME_COUNTER page and
JSP_MAIN_FRAME_COUNTER page which invokes the SSO Login page. Once the user has been authenticate, the result of the JSP_MAIN_FRAME_COUNTER is rendered successfully. The result contains an hyperlink to the
JSP_MAIN_FRAME_COUNTER_DETAIL page. As the user has been authenticated , this page is rendering automatically the result without displaying the SSO Login page. (Perfect as of now!!).
Once I invoke the JSP_HOME_PORTFOLIO from the JSP_HOME_COUNTER, it runs the security procedure without any rendering of the SSO Login page (fine!!) but redirects me back to JSP_HOME_COUNTER instead of rendering the result of the JSP_HOME_PORTFOLIO.
please note that the m_requestUrl variable in the SSOEnablerJSPBean class has been assigned the folowing value : JSP_HOME_COUNTER
Kindly advise .

Trouble using the Web-based utility

I have a WRT54G wireless router, V8, firmware 8.0.0. It is Ethernet-connected to a Windows Vista machine running SP1.
I am having trouble using the Web-based utility. I can access it but cannot make any changes. For instance, if I change the settings on the Setup page and click "save", I get a "This webpage is not available"
I tried updating the firmware and got the same message. Disabling my personal firewall has no effect. Resetting the router from the button on its rear panel has no effect. I tried using with both Windows IE and Google Chrome browsers and got the same result.
I have been using this router without problem for months using a a Windows XP machine. This problem may be associated with my changing it to the current Windows Vista machine. I no longer have the Windows XP machine.
Please help me. Thank you and Happy New Year!
- tom

I spent a full day unsuccessfully trying to make it work, including numerous Linksys utilities downloaded from the site. I could not conjure any support on Linksys chat, and the live body on the Linksys tech support line wanted to charge me $29 for his help.
I finally succeeded by purchasing and installing a Netgear wireless router ($44, Staples) that came up flawlessly the first time. The Linksys device is in my trash.

No Web Based Access PAP2

I have a PAP2 connected to a WRT54GS.
I pick up phone, dial ****110# and write down the IP address provided.
Load up IE and type the same address into the address bar. IE can't connect to it (it bounces to my Google search page).
I log into the WRT54GS and check the DHCP Clients Table, and it identifies the PAP2 as having the address stated and entered above.
Am I missing something here?

The IVR 7932# feature is password protected by your Internet phone service provider. (The Web-based Utility is disabled by default because you will not need to use it unless instructed to do so by your service provider.) You may want to verify the password of your PAP2 from your Internet phone service provider.
Since the Web-based Utility is disabled by default, only your Internet phone service provider can unlock that and they’re the only one authorized to configure and Enable the Web Server.
For Factory Reset, pick up the phone attached to your Linksys, dial ****73738#, press 1 to confirm and then hang up the phone.
For PAP2 manual, refer to the link below:
http://www.net2phone.com/partnerships/distributors/product/broadband/pdf/n2plinksysinstallguide.pdf

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

Error while installing database in oracle linux 4 via VMware Server Console

Hi to all
While Installing Oracle database in linux OS via Virtual machine, i got the below error :-
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-07-30_12-34-31PM. Please wait ...
[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.Internal Error: Can't
connect to X11window server using ':0.0' as the value of the
DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native
Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown
Source)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Unknown Source)
     at
java.awt.GraphicsEnvironment.getLovalGraphicsEnvironment
(Unknown Source)
     at java.awt.Window.init(Unknown Source)
     at java.awt.Window.<init>(Unknown Source)
     at java.awt.Frame.<init>(Unknown Sourece)
     at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown
Source)
     at oracle.sysman.oio.oioc.OicocOneClickInstaller.<init>
(OiocOneClickInstaller.java:378)
     at oracle.sysman.oio.oioc.OiocOneClickInstaller.main
(OiocOneClickInstaller.java:2091)
Please make a clear message to how i need to rectify, as of am a new user for the VMware server console.
Let me know what are all the steps i need to follow for rectifying the above error.
your guidance will be much appreciated.
Regards
Khan

Hi Helious,
After this problem cleared i installed the oracle database; while installing i found another error
Output generated from configuration assistant "Oracle Net Configuration Assistant".
Command = /home/oracle/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser/
dir=/home/oracle/oracle/product/10.2.0/db_1/network/jlib -classpath
/home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:
/home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/home/oracle/oracle/product.10.
2.0/db_1/jlib/ewt3.jar:/home/oracle/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:
/home/oracle/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/home/oracle/oracle/product/10.2.0
and etc.
what i need to do for these errors, and i shutdown my system.
And how i need to continue after rectifying from that point.
Please let me know.. Your help will be highly appreciated
Regards
Khan

E1000 won't connect to Cisco Connect or the Web based set up

My router is working fine but I cannot connect to Cisco Connect or the web based advanced features now. I know I broke the cardinal rule by using advanced set up so that explains why Cisco connect won't work. But I can't figure out why I can't connect to the advanced web based utility now. Who made the decision to put some features in cisco connect but not include those features in advanced settings? And then if you use advanced settings cisco connect no longer works. This is such a turn off I'm actually thinking about returning the thing to Best Buy. That's like saying "if you open the hood of your car and touch anything parts of your car will no longer function". I call support and they repeat what they read on paper "reset the router and start over and don't use advanced settings". What a pain in the &^%$.

I've reinstalled the router again and just switched the ssid and password where it was before so all the devices in our home can connect. I first shut down the guest account using Cisco Connect (which is the only place you can control the guest account) and now I just use the advanced settings. So of course Cisco connect no longer works. I've got a strong signal all over our home. No disconnection issues at all. But this software design that puts some features in one part and other features in advanced and then shuts down cisco connect if you use advanced is insane. If I knew cisco was planning a firmware upgrade to give the advanced mode everything cisco connect has and more then I'd keep this thing. For the life of me I cannot understand why any software engineer would come up with such a design as this. And quite honestly I tried to play by their goofy rules of not using advanced settings and cisco connect died after about 4 uses. Never would connect again. Just said call support (in India) and after telling your life's story to someone simply being told to hit the reset button, power off and start the process all over again. If anyone at Cisco reads this stuff I think I have a legitimate complaint. Why on earth would you put features in Cisco Connect that aren't in advanced and why would you stop running Cisco connect just because I hard coded some mac addresses in advanced mode? I would love to know the logic behine such a crazy implementation of software.

Is it possible to create a rendition targeted for the web based content viewer?

The way PDFs render in the web broswer is (presently) pretty bad.
Can we create a rendition of a Folio which is specifically (and only) for the purpose of being viewed in the web based content viewer?
Also can we leverage the downloading options in the Folio Producer to yield better results and less lags in rendering? I would like to suggest that Adobe adds some kind of indicator/status-bar which shows remiaing assets still being downloaded. For example, video overlays aren't immediately available.
Despite these quirks, this new capability is huge and we really appreciate it!
-Mark
Mark Kunoff
Informational Systems Specialist
IU Communications
Indiana University Public Affairs and Government Relations
[email protected]

It's too bad the selectable text will go away. This will also hamper the web-based views in terms of accessability, correct? - something very important to our stake holders.
Does Adobe plan to bring these good points of the PDF format back in a future release?
Thanks for your consistently fast replies Bob!
-Mark

Modifying the web-based capture utility

Hello - we are looking to modify the web-based capture tool to only allow for video file uploads, and not capturing etc. Anyone have experience with this?
Thanks in advance!

not yet - but i would be interested in details..

I get this message when trying to past simple text into an e-mail document. The Web-Based Email plugin has crashed. I have run out of options...please help.

The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application

Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

Hi I would like to know, how do I add a Hyperlink on Flash, that opens a PDF in adobe reader and not the web browser.

Yoh, what is FSCCommanr ? sorry man I am an absolute beginner in Flash. I tried the code:
/* Click to Go to Web Page
Clicking on the specified symbol instance loads the URL in a new browser window.
Instructions:
1. Replace http://www.adobe.com with the desired URL address.
Keep the quotation marks ("").
instance_name_here.addEventListener(MouseEvent.CLICK, fl_ClickToGoToWebPage);
function fl_ClickToGoToWebPage(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"), "_blank");
this is the same code I used before and it opens a pdf file in a web browser, and it doesn't open an AutoCAD file.

VMware server Console -- not the web based access

Similar Messages

Maybe you are looking for