VMware-server freeze
I installed vmware-server fromt the AUR, and the installation seemed to go perfectly smoothly. The program opens, but when I select local host on the connection options, the program freezes, and has to be killed. Any ideas as to what might cause this?
On Thu, 14 Dec 2006 22:43:43 GMT, Iain wrote:
> Right now I'm thinking
> that a floppy or CD image would be the easiest method.
cd will work, pxe boot also if you set the vm to bridged..
If you have already compiled drivers or have linux.2 please put them on
http://forge.novell.com/modules/xfmo...ect/?zfdimgdrv
Live BootCd and USB Disk from Mike Charles
http://forge.novell.com/modules/xfmod/project/?imagingx
eZie http://forge.novell.com/modules/xfmod/project/?ezie
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net
Similar Messages
-
Server "Freezes" at least once a day
Hello
I have a Xserve G5 with OS X 10.4.9
I run a Forum with vBulletin (Mysql).
My problem is that almost every day, the server freezes, if i do ping, it works, but nothing else. No ARD, No server Admin, no SSH, NOTHING... Sometimes it came back... and i can retake control. Sometimes it just don´t come back and i have to restart it manually...
I have reinstalled OSX, reinstalled Mysql, everything... and the problem continues... The funny thing is that i´m runing the forum with OS X server for more than 2 years. I used to have a Mac mini G4 with no problems... i upgraded to the xserve, and the problem started...
The site is www.twistedandes.com
Any idea what can be?
Thanks
Mariano LozanoHello Steve
Thanks for your help. I´m not an expert, but as i can see, today the server have freezed again for about 30 minutes and when it ocurred, the log shows severall times this error:
Jun 11 08:58:44 Twisted postfix/sendmail[7172]: warning: fork: Resource temporarily unavailable
If you want i can send you the complete log.
Thanks
Mariano -
Error when starting a converted VM (from vmware server edition)
Hi, i am trying to start a converted VM from VMWARE SERVER. I think i have followed steps to import an VMWARE machine (using resources >> virtual machines images) and it does not return errors when converting VM but then, when trying to start it, it returns
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise e
I have also checked that there is enough memory.
This is the contect for vm.cfg
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/OVS/running_pool/SIR_xxx/SIR_xxx.img,hda,w',
'file:/OVS/running_pool/SIR_consulnor/SIR_xxx (2).img,hdb,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '512'
name = 'SIR_xxx'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '1'
uuid = 'e23767cc-dc3d-0255-a7ac-65f111b589d7'
vcpus = 1
vif = ['bridge=xenbr0,mac=00:16:3E:71:AF:B1,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xxx'
vncunused = 1
Thanks for your helpuser559432 wrote:
failed:<OVSException: no server selected to run vm('/OVS/running_pool/SIR_xxx') memory=512> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 77, in start_vm raise eDo your servers have Hardware/Full Virtualization enabled? You can check on the console and ensure the console says that Hardware Virtualization is enabled. If not, check in your BIOS that the processor hardware virtualization is enabled. If you don't have an option, your PC may not have the Intel VT-x or AMD-v extensions required to support hardware virtualization.
You can check to see if your processor supports this extension by using:
Intel processor:
# cat /proc/cpuinfo | grep vmxAMD processor:
# cat /proc/cpuinfo | grep svmIf you see a result, it means the processor has that support. You still need to ensure that it is enabled in the BIOS. -
Start Guest OS Automatically through VMware Server 2 Web Console
Hi All,
Does anyone know how to get the guest OS to automatically start/stop when VMware starts/stops? The user's manual says to click on Edit Virtual Machine Startup/Shutdown Settings, but that link is not there for me under the Commands tab. I also upgraded this from Hardware v4 to v7. I'm not sure if that makes a difference. Any thoughts or ideas would be greatly appreciated, because when my VMware server restarts, I cannot get it to automatically start the virtual machines.
Reference from the User's Manual:
Enabling System-Wide Startup and Shutdown Settings
You can enable virtual machines to be started and shut down automatically and configure how and when virtual machines are started and shut down.
To enable system-wide startup and shutdown settings
1 Select the host in the Inventory panel.
2 In the Commands section of the host Summary tab, click Edit Virtual Machine Startup/Shutdown Settings.
This is within the VMware Server 2 user's guide under Managing Your VMware Server -> Configuring Virtual Machine Startup and Shutdown SettingsHi Paul,
I see now what you mean. You have to select the host for the entire system, not the guest OS. That's what confused me.
Didn't previous versions have a link on there to define how the startup of the specific guest OS functioned?
Chris -
Running VMware Server 2 services as a non-root user
Hello,
I have switched from VirtualBox to VMware Server 2 on my Arch64 server and the transition has been relatively painless. I am at the point now where I want to run VMware's services as a non-root user account (I have a service account called "svc-vmadmin" that I'd like to use). I'm generally not comfortable running services as root, but at the same time I'm conscious of the time and effort required vs. overall benefits.
I've done the usual Google searches and even checked the VMware Server 2 user guide and the VMware community, but I can't find specific details on how to achieve this.
Is this even plausible in a Linux environment? I used to run VMware Server 1 under the SYSTEM account on Windows Server, so I'm hopinga similar thing can be done on Arch.
I would greatly appreciate any information or personal experience that fellow Archers can share.
Thanks,
ThomSystem services are handled by launchd.
If you look in /System/Library/LaunchDaemons/ you'll see a plist file for each service including org.isc.named.plist, the plist for named.
If you edit this file you'll see it's an XML document that describes the service and how the OS should handle it, including the part:
<key>ProgramArguments</key>
<array>
<string>/usr/sbin/named</string>
<string>-f</string>
</array>
Just append another entry in the array that says <string>-u nobody</string> (or whatever username you want to run as. -
[solved] vmware-server aur build fails
I'm trying to install vmware-server from aur. Downloaded the .tar.gz file from vmware, placed it in the build directory, and let it go. Build fails with the following:
(in building vmware-server-modules)
/tmp/yaourt-tmp-david/aur-vmware-server-modules/vmware-server-modules/src/vmware-server-distrib/lib/modules/source/vmci-only/./include/vm_atomic.h:1536:7: warning: "_MSC_VER" is not defined
/tmp/yaourt-tmp-david/aur-vmware-server-modules/vmware-server-modules/src/vmware-server-distrib/lib/modules/source/vmci-only/./include/vm_atomic.h:1663:7: warning: "_MSC_VER" is not defined
/tmp/yaourt-tmp-david/aur-vmware-server-modules/vmware-server-modules/src/vmware-server-distrib/lib/modules/source/vmci-only/./include/vm_atomic.h:1796:7: warning: "_MSC_VER" is not defined
make[2]: *** [/tmp/yaourt-tmp-david/aur-vmware-server-modules/vmware-server-modules/src/vmware-server-distrib/lib/modules/source/vmci-only/linux/driver.o] Error 1
make[1]: *** [_module_/tmp/yaourt-tmp-david/aur-vmware-server-modules/vmware-server-modules/src/vmware-server-distrib/lib/modules/source/vmci-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.33-ARCH'
make: *** [vmci.ko] Error 2
make: Leaving directory `/tmp/yaourt-tmp-david/aur-vmware-server-modules/vmware-server-modules/src/vmware-server-distrib/lib/modules/source/vmci-only'
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build vmware-server-modules package.
Does anyone know of a solution? virtualbox works great, but doesn't support TI's MSP430UIF FET, which is why I'm trying out vmware.
Last edited by beretta (2010-05-07 17:32:03)Trying again... I haven't been able to find a solution. Is there something else I should be doing to install vmware-server and vmware-server-modules?
-
Vmware server 2: error in vmware-config after update to kernel 2.6.31
Hi,
After upgrading my system today, vmware-config.pl issues the following error:
/tmp/vmware-config0/vmmon-only/linux/driver.c: In function 'LinuxDriverSyncCallOnEachCPU':
/tmp/vmware-config0/vmmon-only/linux/driver.c:1423: error: too many arguments to function 'smp_call_function'
/tmp/vmware-config0/vmmon-only/linux/driver.c: In function 'LinuxDriver_Ioctl':
/tmp/vmware-config0/vmmon-only/linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid'
/tmp/vmware-config0/vmmon-only/linux/driver.c:2007: error: too many arguments to function 'smp_call_function'
make[2]: *** [/tmp/vmware-config0/vmmon-only/linux/driver.o] Error 1
make[1]: *** [_module_/tmp/vmware-config0/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.31-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
Unable to build the vmmon module.
My previous vmware server 2 installation was patched for kernel 2.6.30 according to the information here:
http://communities.vmware.com/message/1286903
Before attempting to run vmware-config.pl I reinstalled with vmware-install.pl.
Thanks.For reference I post here the solution to the mouse flickering, in case anyone has the same problem:
http://radu.cotescu.com/2009/10/30/how- … mic-koala/
Just follow step 6 to solve the problem.
JAcky wrote:
dabd wrote:hi
following the instructions here http://blog.mymediasystem.net/uncategor … la-x86_64/
Thank you very much, that works just fine.
I have not noticed any strange VM behavior on my Windows XP installation. But I only use it to test websites with IE and it does not run in full screen mode.
Now I only need to find out why Opera is running at 101% CPU load since the update and I will be all set
Thanks again. -
Cannot uninstall VMware Server 1.0. from Windows 7
[pictures attached]
I tried to install VMware Server 1.0.10, but got this message:
Windows requires a digitally signed driver
A recently installed program tried to install an unsigned driver.
This version of Windows requires all drivers to have a valid digital signature.
The driver is unavailable and the program that uses this driver might not work correctly.
Uninstall the program or device that uses this driver and check the
publisher's support website to get a digitally signed driver.
Driver: VMware bridge driver (64-bit)
Service: VMware Bridge Protocol
PROBLEM: cannot uninstall VMware Server
QUESTION: how can I manually uninstall VMware Server from my Windows 7?
Thanks in advance.If you're being flooded with this (literally every second) in /var/log/messages I would recommend applying patch 5679560 (if you have access to metalink):
Oct 16 11:05:06 vmerin su(pam_unix)[8725]: session closed for user oracle
Oct 16 11:05:06 vmerin su(pam_unix)[8768]: session opened for user oracle by (uid=0)
This will reduce the load significantly. -
Bump VMware Server 1.0.7 Latest error --Not enough memory...
VMware Server Help Post
Platform:
Intel core 2 Duo E2168.
2G ram, but 1/2 just went missing. If this is causing my problems, the mind wobbles, yet it's easy to fix, yay!
Lots of harddrives! Lots of harddrive space.
gigabit eth.
Nvidia 7600GS 512MB
Highpoint raid card (soft) 132Gigs for VMs
Archlinux w/ 2.6.26.3-1 kernel
kernel-headers 2.6.25.8-1
History:
Four weeks ago--
Patched and installed VMware Server 1.0.5 on Archlinux with kernel 2.6.25... everything worked well. Bliss!
About 2 weeks ago--
Upgraded kernel to 2.6.26... time suck began.
Current status:
After banging on VMware and vmmon patch and source code for a while,
now have on kernel 2.6.26-arch--
VMware Server 1.0.7 with patch ...117d, modified as follows:
In .../vmmon-only/include/iocontrols.h
line 48 #define VMMON_VERSION (168 << 16 | 0) changed to:
line 48 #define VMMON_VERSION (138 << 16 | 0)
Patch reasoning [limited newb alert]:
Without 117d, vmmon fails to compile with error re: .nopage
With 117d, vmmon compiles and installs successfully but VMs
won't start with error re: expect version 138 got 168
With patch modified, now past the version error, but getting the error:
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
In log:
Failed to connect to vm: /mnt/VMs/Test Booger/Test Booger.vmx
vmdbPipe_Streams Couldn't read: OVL_STATUS_EOF
Error during launch: 11, The process exited with an error:
End of error message
Operation failed to change the VM to the expected power state.
Not enough physical memory is available to power on this virtual machine.
To fix this problem, power off other virtual machines [No others on]
or adjust the additional memory settings to allow more virtual machine
memory to be swapped [There's plenty of memory]
If you were able to power on this virtual machine on this host computer
in the past, try rebooting the host computer. Rebooting may allow you
to use slightly more host memory to run virtual machines. [Rebooting had no effect]
There's plenty of memory and disk free space--
top -b >> top_out
top - 06:59:46 up 40 min, 0 users, load average: 0.02, 0.05, 0.03
Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie
Cpu(s): 1.1%us, 0.5%sy, 0.0%ni, 97.2%id, 1.2%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1034920k total, 441944k used, 592976k free, 17604k buffers
Swap: 2000084k total, 0k used, 2000084k free, 227224k cached
df -ha
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 72G 44G 25G 65% /
/dev/sdc1 20G 12G 7.5G 61% /mnt/home2
/dev/mapper/hpt45x_dcafabbcai1
153G 21G 132G 14% /mnt/VMs
I reduced host memory settings to 408MB and guest to 256MB as a test. [No effect]
After the tests I've done, I don't believe this error really has anything to do with low memory.
I don't know whether this is a bug, a patch problem, or, or, or, or .....
And so I post.
What next?
thanx in advance.
Last edited by maxbally (2008-09-15 23:33:21)Hi Mike,
Mike23 wrote:
Hi, I develop the device which reads the data on TCP(I use ftp://ftp.ni.com/pub/devzone/epd/stm_2.0_installer.zip)
from crio and then displays them on 7 waveform chart ( 5 chart with 150000 history length and 2 with 600 - 1 minute of measurements) and 2 xy graph. After 10 minutes of work there is an error “not enough memory to complete this operation”. On the WIndows Task manger I have seen that there is a filling RAM approximately from 45 % up to 72 % then the mistake jumps out. But I do not know why. Help please. Labview 8.6Windows Vista3 GB RAMP.S. Forgive for bad English.
It's likely that instead of trying to plot 5 charts with 150000 data-points, you're trying to plot 150000charts with 5 data-points! Try right-clicking on the chart - do you see "Transpose Array" property? If it's checked, UNcheck it (if UNchecked, check it!)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare) -
VMware server: Error trying to compile the vmmon and vmnet modules.
Hello,
I am trying to install VMware server following the wiki: http://wiki.archlinux.org/index.php/Ins … _on_Arch64
I can't get very far as I can't even compile vmmon and vmnet and I have no idea on how to solve this problem
[21:02:38][root@phusis]
[/opt/arch32/root/vmware-server-distrib/lib/modules/source]Arch64# make -C vmmon-only auto-build HEADER_DIR=/usr/src/linux-`uname -r`/include CC=gcc SUPPO_SMP=1 GREP=grep IS_GCC_3=no
Using 2.6.x kernel build system.
make: Entering directory `/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only'
make -C /usr/src/linux-2.6.28-ARCH/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/linux-2.6.28-ARCH'
CC [M] /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.o
In file included from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/x86.h:20,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/machine.h:24,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.h:15,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:49:
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/x86apic.h:79:1: warning: "APIC_BASE_MSR" redefined
In file included from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/numa_64.h:5,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/numa.h:4,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/acpi.h:28,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/fixmap_64.h:15,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/fixmap.h:7,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/apic.h:8,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/smp.h:13,
from include/linux/smp.h:30,
from include/linux/topology.h:33,
from include/linux/mmzone.h:763,
from include/linux/gfp.h:4,
from include/linux/kmod.h:22,
from include/linux/module.h:13,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:12:
/usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/apicdef.h:132:1: warning: this is the location of the previous definition
In file included from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/machine.h:24,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.h:15,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:49:
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/x86.h:830:1: warning: "PTE_PFN_MASK" redefined
In file included from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/pda.h:8,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/current.h:19,
from /usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/processor.h:15,
from include/linux/prefetch.h:14,
from include/linux/list.h:6,
from include/linux/module.h:9,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:12:
/usr/src/linux-2.6.28-ARCH/arch/x86/include/asm/page.h:22:1: warning: this is the location of the previous definition
In file included from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/vmhost.h:13,
from /opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:71:
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/./include/compat_semaphore.h:5:27: error: asm/semaphore.h: No such file or directory
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:146: error: unknown field 'nopage' specified in initializer
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:147: warning: initialization from incompatible pointer type
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:150: error: unknown field 'nopage' specified in initializer
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:151: warning: initialization from incompatible pointer type
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c: In function 'LinuxDriver_Ioctl':
/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.c:1670: error: too many arguments to function 'smp_call_function'
make[2]: *** [/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only/linux/driver.o] Error 1
make[1]: *** [_module_/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.28-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/opt/arch32/root/vmware-server-distrib/lib/modules/source/vmmon-only'
Do you know what I could do to sort the above issue?
Thanks
Ludohi,
i am not able to use the patch. there are always missing files and i dont know the path for this files.
here is the output of the console:
patch -p1 -i /home/felix//Desktop/vmware-workstation-6.5.1.126130-2.6.29_x86_64.patch
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmblock-only/include/compat_wait.h new/vmblock-only/include/compat_wait.h
|--- orig/vmblock-only/include/compat_wait.h 2008-10-28 22:47:20.000000000 -0700
|+++ new/vmblock-only/include/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 19
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmci-only/include/compat_wait.h new/vmci-only/include/compat_wait.h
|--- orig/vmci-only/include/compat_wait.h 2008-10-28 22:47:21.000000000 -0700
|+++ new/vmci-only/include/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch: y
y: No such file or directory
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 34
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/include/compat_wait.h new/vmmon-only/include/compat_wait.h
|--- orig/vmmon-only/include/compat_wait.h 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmmon-only/include/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 49
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/include/x86apic.h new/vmmon-only/include/x86apic.h
|--- orig/vmmon-only/include/x86apic.h 2008-10-28 22:47:17.000000000 -0700
|+++ new/vmmon-only/include/x86apic.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 64
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/linux/driver.c new/vmmon-only/linux/driver.c
|--- orig/vmmon-only/linux/driver.c 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmmon-only/linux/driver.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 85
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/linux/hostif.c new/vmmon-only/linux/hostif.c
|--- orig/vmmon-only/linux/hostif.c 2008-10-28 22:47:17.000000000 -0700
|+++ new/vmmon-only/linux/hostif.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
4 out of 4 hunks ignored
can't find file to patch at input line 173
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmmon-only/linux/vmmonInt.h new/vmmon-only/linux/vmmonInt.h
|--- orig/vmmon-only/linux/vmmonInt.h 2008-10-28 22:47:17.000000000 -0700
|+++ new/vmmon-only/linux/vmmonInt.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 188
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/bridge.c new/vmnet-only/bridge.c
|--- orig/vmnet-only/bridge.c 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmnet-only/bridge.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 203
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/compat_wait.h new/vmnet-only/compat_wait.h
|--- orig/vmnet-only/compat_wait.h 2008-10-28 22:47:19.000000000 -0700
|+++ new/vmnet-only/compat_wait.h 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 218
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/driver.c new/vmnet-only/driver.c
|--- orig/vmnet-only/driver.c 2008-10-28 22:47:19.000000000 -0700
|+++ new/vmnet-only/driver.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
can't find file to patch at input line 235
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vmnet-only/netif.c new/vmnet-only/netif.c
|--- orig/vmnet-only/netif.c 2008-10-28 22:47:18.000000000 -0700
|+++ new/vmnet-only/netif.c 2009-01-20 04:49:44.000000000 -0700
File to patch:
Skip this patch? [y] y
Skipping patch.
4 out of 4 hunks ignored
can't find file to patch at input line 286
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
|diff -Naur orig/vsock-only/include/compat_wait.h new/vsock-only/include/compat_wait.h
|--- orig/vsock-only/include/compat_wait.h 2009-01-20 14:11:34.000000000 +0100
|+++ new/vsock-only/include/compat_wait.h 2009-01-20 14:51:05.000000000 +0100
File to patch:
Skip this patch? [y] y
Skipping patch.
1 out of 1 hunk ignored
thanks
felix -
Can't download vmware server 1.0.10 (fail)
I tried today to download vmware server 1.0.10, but the download link location on the download page (https://my.vmware.com/group/vmware/details?downloadGroup=SERVER1010&productId=25) points to https://www.vmware.com/go/getserver. This unfortunately does not have links for VMware server 1.0 (any release). Can someone please fix this? I know VMware server 1.0 is outdated, but the fabulous tool liveview depends on it.
Does anyone know of a working download link?Guys, email me and I'll send you a link,
My email can be found here:
http://iknowu.dnsalias.com/files/public/vmware/VMWare-Server-v1-CPU-Detection-Fix.htm -
Vmware Server 1.0.3 and kernel 2.6.22
Maybe this will be of help to anyone...
The modules for vmware server 1.0.3 don't compile under 2.6.22-ARCH kernel from testing, and as far as I know there is no patch to fix that automatically yet. I was able to to compile them successfully using the information from post 11 in this thread: http://www.vmware.com/community/thread. … adID=92709 - the specific file that I had to edit was "/usr/src/linux-2.6.22-ARCH/include/asm-i386/page.h".To compile vmware workstation 6 for the new kernel check out this link.
http://npw.net/2007/05/17/vmware-workst … inux-2622/ -
[solution] Installing vmware server on x86_64
I have been getting errors when attempting to run vmware-config.pl on vmware-server with kernel 2.6.30
The error happened when compiling the modules
A solution and a download link for the patch can be found here
http://communities.vmware.com/message/1285430#1285430
Last edited by JAcky (2009-07-04 14:33:27)Here's the errors I get after running vmware-config.pl
The correct version of one or more libraries needed to run VMware Server may be
missing. This is the output of ldd /usr/bin/vmware:
linux-gate.so.1 => (0xffffe000)
libm.so.6 => /lib/tls/libm.so.6 (0x00d8a000)
libdl.so.2 => /lib/libdl.so.2 (0xf7ff2000)
libpthread.so.0 => /lib/tls/libpthread.so.0 (0xf7fe0000)
libX11.so.6 => not found
libXtst.so.6 => not found
libXext.so.6 => not found
libXt.so.6 => not found
libICE.so.6 => not found
libSM.so.6 => not found
libXrender.so.1 => not found
libz.so.1 => not found
libc.so.6 => /lib/tls/libc.so.6 (0x00b86000)
/lib/ld-linux.so.2 (0x00b6d000)
This program cannot tell for sure, but you may need to upgrade libc5 to glibc
before you can run VMware Server.
Some info about my OS:
# uname -mrs
Linux 2.6.9-42.0.0.0.1.ELsmp x86_64
#/cat /etc/enterprise-release
Enterprise Linux Enterprise Linux AS release 4 (October Update 4)
Thanks! -
Hp 9500 printer configuration on solaris 10 on vmware server
hi,
i installed solaris 10 on vmware server when i am going to configure the network printer 9500 hp (its having print server that also i am giving in the print server properties ) , but still i am unable to give print out from staroffice application,
can you write me steps in details Please as soon as possible,
Thanks,
Zubair.> Please, can somebody give me the way, step by step to
configure a DNS server on solaris 10. i want to have
the directories and files that it is necessary to
modify and the modification to have a domain name
"deptech.lan" with ip adress of the DNS
server 192.168.100.2.
>
> thankDo this in this way,
1. unconfig your system
# sys-unconfig
2. Then press " Y" after that it wil reboot..
3. Then it will start config.
4. you can see like that,
Network ( y/n)
Network Interfence ( acc. 2 ur NIC , e.g. rstl0 /nge0 etc..)
select it. If you have two NIC in your system. then you choose any one..
5. Enter your " Host name"
6. then system ip
7. Then some stpes wll appear, it shows,, DHCp, Enable Ipv6 etc.. select acc. 2 ur configartion.
8. Then it will appear ' name service"
then select " Dns"
9. Give your DNS server name
10 . enter " server ip "
then search domain ( enter acc. 2 ur config/ may leave blank)
N.B: for going next stages / contiues you have to use " F2" key..
then it will configured..
Let me know if its ok or for any problem..
Thanks
Partha -
Screen resolution for OEL 5 on VMware Server 1.0.3
Hi
I have installed Oracle Enterprise Linux 5 in a VMware Server 1.0.3 virtual machine.
The problem is that I can only run the virtual machine in 800x600 or 640x480.
Anyone who has tried this and made it work?
I have VMWare Tools installed and I have run the vmware-tools-config, or what its called.
When choosing 1024x768 as the screen resolution. Linux is unable to start the Xserver. Sorry, but I don't have the error message when writing this.
The Virtual Machine i setup as a Red Hat Enterprise Linux 4.0 server.
Regards
Nick
Message was edited by:
NickeHi
This is how the system works right now.
I also tried to add manually the 1024x768 resolution with the Mode option. but this didn't work.
Thx in advance.
/n
Section "Device"
Identifier "Videocard0"
Driver "vmware"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(II) Primary Device is: PCI 00:0f:0
(--) Assigning device section with no busID to primary device
(--) Chipset vmware0405 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] 0 0 0x000b8000 - 0x000bffff (0x8000) MX[B]
[1] 0 0 0x000b0000 - 0x000b7fff (0x8000) MX[B
(II) Setting vga for screen 0.
(--) VMWARE(0): VMware SVGA regs at (0x1060, 0x1061)
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(--) VMWARE(0): caps: 0x000083E2
(--) VMWARE(0): depth: 24
(--) VMWARE(0): bpp: 32
(--) VMWARE(0): vram: 16777216
(--) VMWARE(0): pbase: 0xf0000000
(--) VMWARE(0): mwidt: 2360
(--) VMWARE(0): mheig: 1770
(--) VMWARE(0): depth: 24
(--) VMWARE(0): bpp: 32
(--) VMWARE(0): w.red: 8
(--) VMWARE(0): w.grn: 8
(--) VMWARE(0): w.blu: 8
(--) VMWARE(0): vis: 4
(**) VMWARE(0): Depth 24, (--) framebuffer bpp 32
(==) VMWARE(0): RGB weight 888
(==) VMWARE(0): Default visual is TrueColor
(==) VMWARE(0): Using HW cursor
(==) VMWARE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VMWARE(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) VMWARE(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) VMWARE(0): Unable to estimate virtual size
(II) VMWARE(0): Clock range: 0.00 to 400000.00 MHz
(II) VMWARE(0): Not using default mode "640x350" (vrefresh out of range)
(II) VMWARE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
. For any screen resolution
(II) VMWARE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
(II) VMWARE(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode "2560x1600" (width requires unsupported line pitch)
(II) VMWARE(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(--) VMWARE(0): Virtual size is 800x600 (pitch 800)
(**) VMWARE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) VMWARE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 hsync vsync
(**) VMWARE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) VMWARE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 hsync vsync
(**) VMWARE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) VMWARE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) VMWARE(0): DPI set to (75, 75)
[17] -1 0 0x00001050 - 0x0000105f (0x10) IX[B]
[18] -1 0 0x00001060 - 0x0000106f (0x10) IX(B)
(II) VMWARE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000)
(II) VMWARE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
(==) VMWARE(0): Backing store disabled
(==) VMWARE(0): Silken mouse enabled
(II) VMWARE(0): Initialized VMWARE_CTRL extension version 0.1
Maybe you are looking for
-
PLEASE!!!! I need Some Help, Its not my Ipod
A siters friend, lend my her Ipod for a music uploads, It´s the Ipod whit the four buttons and the wheel. exactly at the time I conect the Ipod to my lap a message from update appears. I downloaded ipod updater 2005-09-23 and selected update. but the
-
SAP BW Key figures displayed 100 times larger than it should
Dear all, I'm using Crystal Reports 2008 SP2 und SAP Intetegration Kit X3.1 SP2 to create a report upon a BW Query (7.01). Several key figures are displayed exactly 100 times larger than it should. Only the formatted value is displayed correctly. Is
-
I can't print company name to labels using address book. I've tried and tried. I've tried for hours! It prints contact name and address but not company name. Very frustrated! Anyone have a fix. Thanks very much for your help! Matt
-
Newbie question - how to format timeline to not show hours?
Hello - trying out Premiere after giving up on (gasp) iMovie I make very short videos - from 30+sec to 5 minutes. I don't need the timeline to show so much detail. The hours are meaningless. I also am not yet trying to sync audio with precision I d
-
I purchased ScanSnap and it came with Adobe Acrobat Professional. It was for a club. I am now leaving the club and transferring the scanSnap back to the club. BUT i can't find my Acrobat Pro disk. What should I do? Thanks Ron 6