VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Ok. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Similar Messages

I have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. show i buy a new snow leopard disc fromapple

i have zero out all data on my imac, as i brought it second hand and the disk the guy supplied dont seem capatable with my imac to install the operating system again so it is frozen at the grey start up screen. should i buy a new snow leopard disc from apple and install that as my new operating system. please help as had the computer a month now and still cant use it yet.

You can call AppleCare and request a replacement set of the original DVD's that shipped with the computer for a nominal charge. You will need the serial number (look on the bottom of the stand) and a credit card. Click the AppleCare Contact Info link. Without knowing which iMac you have it's very difficult to say if a new SL disc would work or not.

I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

I bought a second hand Macbook Pro and colorful stud
Only after a few months I decided to reformat it
Bad movie started here I did not get it with a disc and I come to install the operating system
And he asks the name of Apple's user ID financed had been bought Lion OS Now
And who sold me does not answer then I found the phone number of his mother
She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
And I'm not from USA

Unless you go back to the original owner, yes you need to pay for it again.
You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do. If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple). If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8. You didn't purchase it so that's not you.
The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
And it's a good idea to know you have restore media before you reformat your machine.

Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

Can I run the Photoshop CC and Lightroom with Windows XP professional as the operating system?

The tech specs for Phtoshop CC and Lightroom indicate Windows 7 with SP 1 is required as a minimum, so XP would not be sufficient to run them. Here's the Photoshop specs:
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor (2GHz or faster)
Windows 7 with Service Pack 1, Windows 8, or Windows 8.1*
1GB of RAM
2.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on removable flash storage devices)
1024x768 display (1280x800 recommended) with OpenGL® 2.0, 16-bit color, and 512MB of VRAM (1GB recommended)†
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.‡

Re-installing Adobe Lightroom with cd software after re-installing the operating system?

i wiped my computer clean and re-installed the operating system on my macbook pro because it's old and i hadn't done it in a long time. now i'm putting all of my old software back onto the computer. everything else had no problem. adobe lightroom 2 will not let me re-install it and keeps giving me an error message, telling me to contact the software manufacturer. the cd is not damaged at all and i have the serial number for the software, etc... what's wrong? why can't i put it back on my computer? i've done this at least twice before and had no problems.

What version of Mac you are installing and what is the exact error message ?

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even h

I had to delete everything on my computer and install the operating system again , but I had to install Snow Leopard because it was the cd that came with the computer when I bought it. The problem is that I had already paid for the OS Lion and even had upgraded to the Mavericks . I do not think it's fair to have to pay again and I would like to upgrade my operating system without having to pay again for the same system.

Hi anatuta,
Thanks for visiting Apple Support Communities.
It sounds like you are trying to upgrade your Mac to a newer version of OS X, after completing a fresh install of Snow Leopard.
If you have already purchased and downloaded OS X Lion and Mavericks, you should be able to find these items in the Purchased section of the Mac App Store.
You may find the steps in this article helpful with finding the items:
Mac App Store: Finding your purchased apps - Apple Support
If you do not see the items in the Purchased section, they may be hidden:
Hide and unhide purchases in the Mac App Store - Apple Support
All the best,
Jeremy

Am upgrading to Lion. Does anyone know if this new system will replace the operating system presets for printing that are on Leopard?

Having trouble with my print operating system. It will not hold presets. If I upgrade to Lion, will Lion replace Leopard's print operating system?

harrietny wrote:
Having trouble with my print operating system. It will not hold presets. If I upgrade to Lion, will Lion replace Leopard's print operating system?
It'll likely replace the printer drivers too since some older drivers may rely on Rosetta, which Lion eliminates. Along with new drivers, you may loose printing capabilities, as I did with a legacy Epson printer. Since you're in the Mac Pro forum, if you actually have a Mac Pro, it might be wise to install an additional hard disk and run the Lion upgrade on that. Try it out and see if you actually get an improvement. If not, you've still got Leopard to retreat to and an extra disk to back up on.

App installation fails with error 0xE8000004

hello,
i have purchased a navigation (GPS) application for iphone and ipad but installation fails with error 0xE8000004, even if the application is the only one (i have removed all other apps). I have tried on iphone and ipad and using different OS: Windows 7 professional 64 and Windows XP 32.
Has anyone an idea of the problem ?

Already done and this was the reply:
Response (Frederick) - 03/01/2011 12.59 PM
Dear Ettore,
Thank you for contacting CoPilot Technical Support.
If you are experiencing download issues between two Apple platforms (here between the iPhone and iTunes), I advise you contact Apple directly from your purchase history in iTunes then 'Report a problem' as ALK is not in charge of the installation on this device.
Then i contacted Apple and the reply was:
Ettore, please call up to the iPhone technical support. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
I am a little bit disappointed.

DB installs fails with [INS-30060] Check for group existence failed

Hi folks
as user jjayet I'm running on OEL 5.6 64 bits the following command to install DB 11gR2 :
$ /mntmats/SOAVM0504/AUTO_WORK/dbzip_shiphome/database/Disk1/runInstaller -ignoreSysPrereqs -invPtrLoc /ade/jjayet_dte9672/oracle/work/DATABASE1/oraInst.loc -force -silent -waitforcompletion -responseFile /ade/jjayet_dte9672/oracle/work/DATABASE1/db.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15258 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16454 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_06-07-54AM. Please wait ...[FATAL] [INS-30060] Check for group existence failed.
CAUSE: Unexpected error occurred while trying to check for group existence.
$ id
uid=511053(jjayet) gid=8500(dba) groups=8500(dba),59031(oinstall)
the problems seems relater to accessing /tmp
as the local disk is not enough to use the default /tmp (the DB install will fail with full disk error as the local disk space is very low )
I've created a partition from new disk to /tmp which I have then mounted (default is nfs3) :
# mount /dev/xvdc1 /tmp
# mount
/dev/xvdc1 on /tmp type ext2 (rw)
the result of DB install into /tmp is :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-xr-x 2 jjayet dba 4096 Apr 5 06:36 CVU_11.2.0.2.0_jjayet
drwxrwxrwx 7 root root 4096 Apr 5 06:36 .
if I umount /tmp but use the local /tmp
re-running the DB installer as user jjayet it does not raise the error above
and now local /tmp contains :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-x--- 10 jjayet dba 4096 Apr 5 06:25 OraInstall2012-04-05_06-25-28AM
drwxr-xr-x 3 jjayet dba 4096 Apr 5 06:25 CVU_11.2.0.2.0_jjayet
drwxrwxrwt 5 root root 4096 Apr 5 06:25 .
do you know how to use tmp over nfs with user jjayet so that the DB can install properly ?
it seems that the files created as user jjayet into mounted /tmp are not identified properly
thks in advance
jean

thks for the pointer
I found the post you mention but it does not help
it does not explain the root cause of the problem but just propose a workaround to pass an option to installer which will popi\up an interactive messgae at install time
as installation is done automatically through ADE / DTE I cannot use this workaround
any expert in oracle DB install can help ?
thks
Jean

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

Installation fails with "internal error 2502"

I have a client running Windows Vista Home Premium Edition (32 bit) and my app's CVI-built installer fails with "Internal Error 2502".
This installation kit has been successfully deployed on hundreds of computers with various versions of Windows and I have never seen this one. No device drivers or advanced libraries - just the standard runtime. I use CVI 9.0.1.
Searches reveal very little - some old issues with Office installation, date/time settings etc. but I have yet to find anything that indicates what this error represents.
Any insights or ideas very welcome.
Thanks,
Ian
Solved!
Go to Solution.

That appears to be a Windows Installer (MSI) error, and can have many different causes. Can you confirm that anyWindows installers (perhaps try newest Adobe Reader) work on that system? Is the system's date/time set correctly? Could there be a permissions restriction with C:\Windows\system32 or C:\Programs\National Instruments\Shared?
I'd also try doing an internet search for "installer error 2502" and see what other tips you might find. If all else fails, try running the installer from the command line like this:
setup.exe /log install_log.txt
That will generate a log file that might contain a hint for us.
Mert A.
National Instruments

Installation failed with error code 1603

Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
Naveed

I have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

VS 2013 Build tools installation fails with error "Signature or catalog could not be verified"

VS 2013 ultimate - Build tools installation fails with error "Signature or catalog could not be verified" for MSBuild assemblies. Any idea what could be the problem?
Thanks
NM

Hello,
Do you mean you are trying to use this tool:
https://www.microsoft.com/en-us/download/details.aspx?id=40760
Can you navigate to your %temp% folder and filter by date to see the log of the Build tool?
I want to know which assemblies failed to be verified.
By the way, since MSBuild is embed in Visual Studio why you want to install this again? Do you have any error about this Build Tool when you install Visual Studio 2013 Ultimate?
“Signature or catalog could not be verified” is always related to corrupt source
, please double check you have a healthy network and then try the web installer again.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Similar Messages

Maybe you are looking for