Vmware vsphere health check report v5.1.0

Hi,
I'm currently using the vmware vsphere health check report v5.1.0 script. I switched from another perl script to this and the report provide much more information. There is one thing that don't seem to work properly though..
I currently have a failed disk in my server and the report is showing "unknown" status next to 3 disk / disk day. If I run the other script I have used in the past, I have 3 alerts in red clearly showing that something has failed. Would any of you know why it's showing as unknown instead of critical in the report?
Old Script
o Disk or Disk Bay 15 Drive 15 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 15 Drive 15 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 14 Drive 14 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 13 Drive 13 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 12 Drive 12 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 11 Drive 11 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 10 Drive 10 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 9 Drive 9 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 8 Drive 8 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 7 Drive 7 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 6 Drive 6 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 5 Drive 5 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 4 Drive 4 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 3 Drive 3 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: Drive Fault - Assert: 0
o Disk or Disk Bay 2 Drive 2 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: In Critical Array - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 2 Drive 2 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: In Critical Array - Assert: 0
o Disk or Disk Bay 1 Drive 1 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 1 Drive 1 0: Rebuild In Progress - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Drive Fault - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Predictive Failure - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: In Critical Array - Assert: 0
o Disk or Disk Bay 0 Drive 0 0: In Failed Array - Deassert: 0
o Disk or Disk Bay 0 Drive 0 0: Rebuild In Progress - Deassert: 0
New Report
BIOS 1 ABR Status 0: Unspecified - Deassert
0
OK
BIOS 1 Firmware Error 0: Unspecified - Deassert
0
OK
BIOS 1 Firmware Error 0: Unspecified - Deassert
0
OK
Cooling Unit 1 Cooling Zone 1 0 - Fully redundant
0
OK
Cooling Unit 2 Cooling Zone 2 0 - Fully redundant
0
OK
Cooling Unit 3 Cooling Zone 3 0 - Fully redundant
0
OK
Disk or Disk Bay 0 Drive 0 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: In Critical Array - Assert
0
UNKNOWN
Disk or Disk Bay 0 Drive 0 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 0 Drive 0 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: In Critical Array - Assert
0
UNKNOWN
Disk or Disk Bay 1 Drive 1 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 1 Drive 1 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 10 Drive 10 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 11 Drive 11 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 12 Drive 12 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 13 Drive 13 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 14 Drive 14 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 15 Drive 15 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Drive Fault - Assert
0
UNKNOWN
Disk or Disk Bay 2 Drive 2 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 2 Drive 2 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 3 Drive 3 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 4 Drive 4 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 5 Drive 5 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 6 Drive 6 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 7 Drive 7 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 8 Drive 8 0: Rebuild In Progress - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Drive Fault - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: In Critical Array - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: In Failed Array - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Predictive Failure - Deassert
0
OK
Disk or Disk Bay 9 Drive 9 0: Rebuild In Progress - Deassert
0
OK

Thank you for the follow up. I do understand that a completly unreadable disk might throw an unknown status but the status is different from one report than the other. On one side, it clearly shows in red that the disk has something and on the side, it just throws a "I don't know what's going on with the disk". I ran both report the same day and i'm expecting some red in the report to warn me if a disk fail.
Is there a way to change that behavior from the health check script?

Similar Messages

Vsphere health check report 5.1 vs ESX 5.5u1

Hi,
The script has been working without issues for quite some time. I recently upgraded my hosts to ESX 5.5u1 and now the scheduled task is returning an error -->
Can't load class 'HostSriovInfo' at C:/Program Files (x86)/VMware/VMware vSphereCLI/Perl/lib/VMware/VIMRuntime.pm line 52.
Any idea as to how to make it work again?
Thanks

Noone?

How to automate DB health check report using OEM 11g

Hi,
I have been asked to share the DB health check report using OEM 11g. Could you please let me know how to achieve this and the report should go to his email.
Thanks in advance,
Bala

check,
manually you can schedule it through dbms_hm
http://www.oracle.com/technetwork/articles/sql/11g-resiliency-091703.html

SCOM health Check report

please suggest me how to generate SCOM health check report and automation for the same. I am using scom 2007 R2.
And need all windows servers health check report from scom as well...?

Hi
As a good starting point you could use these reports
http://www.systemcentercentral.com/scc-health-check-reports-management-pack-v2/ and some Details here
https://blogs.technet.com/b/kevinholman/archive/2010/07/21/system-center-central-some-really-cool-opsmgr-health-reports-available.aspx. Which give you a pretty good picture of your environment.
For a MG check up on the SQL side see here
http://blogs.technet.com/b/kevinholman/archive/2010/06/16/management-group-checkup-a-database-perspective.aspx
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

ASA 5550 Health Check report..

hi,
am a biginner with Network Security,
please let me know what are the infromation required to make a Health Check report for ASA and IPS ,
thanks,
Anvar

hi,
this is link will help us to answer my above question,,i got it today only.
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080b8e100.shtml

SAP Early WatchHealth Check Report

Hi Folks,
I am trying to generated SAP Early Watch Health Check Report from my dual stack system but the JAva data are not populated. On the other hand, the JAva data are populated in EWA report.
Does SAP Health Check Report not support Java data?
Thank you so much,
Mari

Hello,
I haave a dual stack Solution Manager system. The EA reports fine on both ABAP and Java, so I have Java data in my EWA reports.
When I create an Earlywatch HEalth Check Service session, I see the section "Definition of System SLM in SMSY" and I see teh Application Server ABAP Stach and Application Server Java Stack, both checked as relevent. Under the section "Servers in current Landscape" I see both ABAP and JAva checked. So this system is clarly identified in the EWHC as a dual stack system.
What I do not see in the service session are any Java checks that I would see in the EWA report. I mean I am not seeing it in the structure of the service session. This would indicate to me the the checks are not done, as opposed to data missing. If the data was missing the place to contain the data would be there, and its not in the structure.
I performed the same on a Solution Manager 7.1 system, and have the same results, no Java
Again, beause I do not see the tree structure in the service session having any nodes for Java data that are just empty, this does not look like missing data, but looks like it is not reported intentionally.
Perhaps someone who deliivers this service on a regular basis can add their input, or a developer, but based on my testing, on a dulal stack system, where the EWA reports Java data, I cannot see that the Java data is even being considered, or it would have a place int eh session tree of the Earlywatch Health Check, and would have entries int eh tree that would be grey if it was just missing. Additionally it is reporting a Java and ABAP stack, so it does know there is a Java stack. Based on this, it would seem the EWHC does not report on Java.
Unfortunately I do not have a java only stack system in my landscape, as it would be interesting to see what this service would report on a Java only system. Should the report generate no data and the Session not initilaize of just have no nodes, then you could say for certain. Unfortunately I do not know this for certain and can only draw conclusions based on the test I performed on my two test Solution Manager systems . One being 7.0 EHP1 SP 27 and the other 7.1 SP03.
Regards,
Paul

Early Health Check - missing data

Hi folks,
My Early Health Check reports are generated with a couple of data missed. For example, SQL expensives don't appear and also the CPU Graphics.
Do you guys know what it could be?
tks a lot
Re

Hello,
Here is a question, this same data should be in the Earlywatch Alert reports (EWA).
Is it in the EWA reports or is it missing there too?
The services are different, but report much of the same information, and the Early Watch Alert should have the same
data you mentioned is missing int he Early Watch Health Check.
So is it there or not?
Regards,
Paul

DB Health Check Scripts

Hi all,
Oracle 9i, 10g, 11g
Can you share me your "health check" scripts which you have used in your PROD database and is proven to help you in carrying out your desired tasks being a good DBA :)
Does AWR be able to generate health check report?
Thanks a lot,
Kinz

KinsaKaUy? wrote:
Thanks sb,
http://www.orafaq.com/wiki/Scripts
Wow this one site is complete, But it will take years for me to read all these. And I dont know if this is for 8i, 9i, 10g, or 11g.
Can you tell me which of these scripts will list the Top 10 most resource consumers queries? in terms (CPU,Memory,I/O).If you enable SQL_TRACE prior to launching AWR report, then you capture EVERY SQL statement to build the report.
You could easily observe the answer to your question if you were only willing to actually did some lilttle work instead of asking to be spoon fed.

Exchange 2010 Health check

Dear all,
if the exchanger 2010 run DAG (two servers). How to mak the health check very day and health check report will be sent by email .
thank you
john

Hi
Maybe you can run exbpa everyday and export it share folder.
You can read this blog.
How to Schedule an Exchange BPA Scan in Exchange Server 2010
If you want to send email, you have to write script for it.
Terence Yu
TechNet Community Support

Graphical Reports for Database Health Check or Database Statictics

Hello
we are using oracle 10g on Solaris.
Is there a way I can get the Database health check or database statictics report in graphical form like to represent the growth of database (in a week or month), log size etc..
Thanks

You'll have to develop your own method/application/script as per your requirement. To some extent Enterprise manager may help you but I think this is not your requirement.

Sequencing multiple versions of the VMWare vSphere client (and reducing the size of the final sequence)

Application Name: vSphere client
Application Version: 4.1, 5.0, and 5.5 (all in one package)
Company Name: VMWare
Sequencer Version: 5.0 SP1 or SP2
App-V Client Version Tested On: 5.0, 5.0 SP1, 5.0 SP2
Operating System Sequenced On: Windows 7 (64bit)
Pre-requisites: Orca
Client Operating Systems Successfully Deployed To: Windows 7 (64bit), Windows Server 2008 (64bit)
*Posted by non-Microsoft Employee: Cody Lambert (a Fortune 100 company)
If Posted by Microsoft Employee, the Corresponding KB Article Reference:
N/A
Steps to Prepare and Sequence the Application:
Phase 1: Prepare vSphere install to be used in your sequence (to be performed prior to sequencing)
Clear %TEMP% directory on machine you are using to prepare the install
Create a folder that will be referred to as "vSphereInstDir"
that install files are copied to
Download the vSphere 5.5 client from your vSphere management server
Run the installer for the vSphere Client
Once at the Language Selection portion of the installer,
using windows explorer browse to the %temp% directory and copy the files that were just created when the vSphere installer extracted to a directory (name it vSphereInstDir)
Kill the installer
Find VMware-viclient.exe in the files you just copied
and run it
Once at the "Welcome to the installation
wizard" stage of the installer, using windows explorer browse to the %temp% directory and copy the files that were just created into the vSphereInstDir
Kill the installer
Find the VMware vSphere Client 5.5.msi in the vSphereInstDir,
in the second set of files you copied over
Using Orca, open the VMware vSphere Client 5.5.msi
Drop the following rows from the msi (some of the rows may have additional text at the end of the names) (InstallExecuteSequence/VM_InstallHcmon,
InstallExecuteSequence/VM_InstallHcmon_SetData,
InstallExecuteSequence/VM_InstallUSB,
InstallExecuteSequence/VM_InstallUSB_SetData,
InstallExecuteSequence/VM_InstallUSBArbritrator,
InstallExecuteSequence/VM_InstallUSBArbritratorSetData,
InstallExecuteSequence/VM_StartUSBArbSvc)
Save the VMware vSphere 5.5.msi in place
Copy the vSphereInstDir to a network location that
can be used during sequencing on your Sequencer
Phase 2: Sequence the vSphere Client
Pre-requisites: All of the latest available VC++ redist (x64 and x86) are installed on the Sequencer VM
Copy vSphereInstDir to your temporary install directory on your Sequencer (mine is C:\temp)
Start up the Sequencer
Click Create a New Virtual Application Package
Click Next with Create Package (default) selected
Click Next on the Prepare Computer screen, taking
note of any findings
Click Next with Standard Application (default) selected
Choose Perform a custom installation, then click Next
Input the Virtual Application name (vSphere Client
5.5 for example)
Enter the Primary Virtual Application Directory (C:\vSphere55
for example) and click Next
Using Windows Explorer find the Visual J# install (vjredist64.exe) in the vSphereInstDir you copied over. Install using defaults
Using Windows Explorer, find and install the vSphere client using the VMware vSphere Client 5.0.msi located in the vSphereInstDir you copied over.
Change the installation directory to use the Primary Virtual Application Directory you configured above (C:\vSphere55 for example). Install using
defaults
While the sequencer is still monitoring changes connect to the 4.1 environment to get the files needed. To do this, launch the vSphere client and connect
to your 4.1 environment. When prompted, choose RUN to install the files needed for the 4.1 environment.
While the sequencer is still monitoring changes connect to the 5.0 environment to get the files needed. To do this, launch the vSphere client and
connect to your 5.0 environment. When prompted, choose RUN to install the files needed for the 5.0 environment.
With the sequencer still monitoring changes, after the additional environments have been installed, delete all of the language folders from the install locations
that are not required. You will find that there are language folders in each of the different modules that are installed. Make sure look in every folder. This will free up approximately 300mb from the package.
When done, check the box to finish the sequence and continue cleaning up the sequenced application.
Known Issues/Limitations:
Functions that require the USB Arbritration Service will not work
Approximate Sequencing Time:
20 minutes
Descriptive Tags:
App-V, 5.0, VMWare, vSphere, Recipe, Guidance
Credit Due: Thanks to Rorymon and Aaron Parker for accurate information that allowed for me to put together this recipe.

Can you double check the that the following were removed from the MSI:
InstallExecuteSequence/VM_InstallHcmon
InstallExecuteSequence/VM_InstallHcmon_SetData
InstallExecuteSequence/VM_InstallUSB
InstallExecuteSequence/VM_InstallUSB_SetData
InstallExecuteSequence/VM_InstallUSBArbritrator
InstallExecuteSequence/VM_InstallUSBArbritratorSetData
InstallExecuteSequence/VM_StartUSBArbSvc

Health Check in Exchange 2007 Scripting

Hi All,
I have been looking around for scripts which would help me perform regularised health checks in my enviornment. After lot of googling i was able to get a script which would meet my requirements. However i have a few challenges involved in extracting some
more information:
1. Mailbox Store Size, Free Diskspace percentage for mailbox servers
2. Remote Mail flow Tests & Mailflow test to every exchange 2007 mailbox servers in org.
3. Automating Email of collected data (in HTML) to Administrator.
4. Executing the script Automatically without triggering it from Exchange Management Shell.
Script Below
param( [string] $auditlist)
Function Get-CustomHTML ($Header){
$Report = @"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Frameset//EN" "http://www.w3.org/TR/html4/frameset.dtd">
<html><head><title>$($Header)</title>
<META http-equiv=Content-Type content='text/html; charset=windows-1252'>
<meta name="save" content="history">
<style type="text/css">
DIV .expando {DISPLAY: block; FONT-WEIGHT: normal; FONT-SIZE: 8pt; RIGHT: 8px; COLOR: #ffffff; FONT-FAMILY: Arial; POSITION: absolute; TEXT-DECORATION: underline}
TABLE {TABLE-LAYOUT: fixed; FONT-SIZE: 100%; WIDTH: 100%}
*{margin:0}
.dspcont { display:none; BORDER-RIGHT: #B1BABF 1px solid; BORDER-TOP: #B1BABF 1px solid; PADDING-LEFT: 16px; FONT-SIZE: 8pt;MARGIN-BOTTOM: -1px; PADDING-BOTTOM: 5px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; WIDTH: 95%; COLOR: #000000; MARGIN-RIGHT:
0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; BACKGROUND-COLOR: #f9f9f9}
.filler {BORDER-RIGHT: medium none; BORDER-TOP: medium none; DISPLAY: block; BACKGROUND: none transparent scroll repeat 0% 0%; MARGIN-BOTTOM: -1px; FONT: 100%/8px Tahoma; MARGIN-LEFT: 43px; BORDER-LEFT: medium none; COLOR: #ffffff; MARGIN-RIGHT: 0px; PADDING-TOP:
4px; BORDER-BOTTOM: medium none; POSITION: relative}
.save{behavior:url(#default#savehistory);}
.dspcont1{ display:none}
a.dsphead0 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#FFFFFF; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #CC0000}
a.dsphead1 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead2 {BORDER-RIGHT: #B1BABF 1px solid; PADDING-RIGHT: 5em; BORDER-TOP: #B1BABF 1px solid; DISPLAY: block; PADDING-LEFT: 5px; FONT-WEIGHT: bold; FONT-SIZE: 8pt; MARGIN-BOTTOM: -1px; MARGIN-LEFT: 0px; BORDER-LEFT: #B1BABF 1px solid; CURSOR: hand; COLOR:
#ffffff; MARGIN-RIGHT: 0px; PADDING-TOP: 4px; BORDER-BOTTOM: #B1BABF 1px solid; FONT-FAMILY: Tahoma; POSITION: relative; HEIGHT: 2.25em; WIDTH: 95%; BACKGROUND-COLOR: #7BA7C7}
a.dsphead1 span.dspchar{font-family:monospace;font-weight:normal;}
td {VERTICAL-ALIGN: TOP; FONT-FAMILY: Tahoma}
th {VERTICAL-ALIGN: TOP; COLOR: #CC0000; TEXT-ALIGN: left}
BODY {margin-left: 4pt}
BODY {margin-right: 4pt}
BODY {margin-top: 6pt}
</style>
<script type="text/javascript">
function dsp(loc){
   if(document.getElementById){
      var foc=loc.firstChild;
      foc=loc.firstChild.innerHTML?
         loc.firstChild:
         loc.firstChild.nextSibling;
      foc.innerHTML=foc.innerHTML=='hide'?'show':'hide';
      foc=loc.parentNode.nextSibling.style?
         loc.parentNode.nextSibling:
         loc.parentNode.nextSibling.nextSibling;
      foc.style.display=foc.style.display=='block'?'none':'block';}}
if(!document.getElementById)
   document.write('<style type="text/css">\n'+'.dspcont{display:block;}\n'+ '</style>');
</script>
</head>
<body>
<b><font face="Arial" size="5">$($Header)</font></b><hr size="8" color="#CC0000">
<font face="Arial" size="1"><b>Version 1 |M & C | <A HREF='http://mail.exchange.com'>mail.exchange.com</A></b></font><br>
<font face="Arial" size="1">Report created on $(Get-Date)</font>
<div class="filler"></div>
<div class="filler"></div>
<div class="filler"></div>
<div class="save">
Return $Report
Function Get-CustomHeader0 ($Title){
$Report = @"
<div class="dspcont0">
<h1><a href="javascript:void(0)" class="dsphead0" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h1>
<div class="dspcont0">
Return $Report
Function Get-CustomHeader ($Num, $Title){
$Report = @"
<h2><a href="javascript:void(0)" class="dsphead$($Num)" onclick="dsp(this)">
<span class="expando">show</span>$($Title)</a></h2>
<div class="dspcont">
Return $Report
Function Get-CustomHeaderClose{
$Report = @"
  </DIV>
  <div class="filler"></div>
Return $Report
Function Get-CustomHeader0Close{
$Report = @"
  </DIV>
  <div class="filler"></div>
Return $Report
Function Get-CustomHTMLClose{
$Report = @"
</div>
</body>
</html>
Return $Report
Function Get-HTMLTable{
param([array]$Content)
$HTMLTable = $Content | ConvertTo-Html
$HTMLTable = $HTMLTable -replace '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">', ""
$HTMLTable = $HTMLTable -replace '<html xmlns="http://www.w3.org/1999/xhtml">', ""
$HTMLTable = $HTMLTable -replace '<head>', ""
$HTMLTable = $HTMLTable -replace '<title>HTML TABLE</title>', ""
$HTMLTable = $HTMLTable -replace '<', "<"
$HTMLTable = $HTMLTable -replace '>', ">"
$HTMLTable = $HTMLTable -replace '</head><body>', ""
$HTMLTable = $HTMLTable -replace '</body></html>', ""
Return $HTMLTable
Function Get-HTMLLink ($activeURL){
$Report = @"
<a href=$activeURL>$activeURL</a>
Return $Report
Function Get-Ink ([String]$inData){
[String]$inclPercentage = @(35..100)
$positive = ($inclPercentage, 'Success', 'Ready', 'Running', 'OK', 'True', 'Information')
If ($positive -match $inData)
$Report = @"
<font color='#009900'>$inData</font>
Else
$Report = @"
<font color='#FF0000'>$inData</font>
Return $Report
Function Get-HTMLBasic ($Detail){
$Report = @"
<TABLE>
<tr>
  <td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
Function Get-HTMLDetail ($Heading, $Detail){
$Report = @"
<TABLE>
<tr>
<th width='25%'><b>$Heading</b></font></th>
<td width='75%'>$($Detail)</td>
</tr>
</TABLE>
Return $Report
$input | foreach {$targets += @($_)}
If ((Test-Path variable:\targets) -eq $True){
   Write-Host "Server list input detected on pipeline" -ForegroundColor Yellow
Else{
if ($auditlist -eq ""){
   Write-Host "No server list specified, getting all Exchange 2007 servers" -ForegroundColor Yellow
   $targets = Get-ExchangeServer | Where-Object {$_.IsExchange2007OrLater -eq $True}
  else
   if ((Test-Path $auditlist) -eq $false)
    Write-Host "Invalid server list specified: $auditlist" -ForegroundColor DarkRed
    exit
   else
    Write-Host "Using Audit list: $auditlist" -ForegroundColor Cyan
    $Targets = Get-Content $auditlist
$now = Get-Date
#Custom Expressions
$latencyMS = @{Name="Latency(MS)";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$MessageLatencyTime = @{Name="MessageLatencyTime";expression={[Math]::Round(([TimeSpan] $_.Latency).TotalMilliSeconds)}}
$hotLink = @{Name="URL";expression={Get-HTMLLink ($_.URL)}}
$colourResult = @{Name="Result";expression={Get-Ink ($_.Result)}}
$colourStatus = @{Name="Status";expression={Get-Ink ($_.Status)}}
$colourType = @{Name="Status";expression={Get-Ink ($_.Type)}}
$newResult = @{Name="Result";expression={If ($_.Result.ToString() -ne 'Success'){Get-Ink ('Failure')} Else {Get-Ink ('Success') }}}
$fullReport = Get-CustomHTML "Exchange 2007 "
$fullReport += Get-CustomHTMLClose
Foreach ($Target in $Targets){
Write-Host "Collating Detail for $Target" -ForegroundColor Yellow
Write-Host "..getting basic computer configuration"
$ComputerSystem = Get-WmiObject -computername $Target Win32_ComputerSystem
switch ($ComputerSystem.DomainRole){
  0 { $ComputerRole = "Standalone Workstation" }
  1 { $ComputerRole = "Member Workstation" }
  2 { $ComputerRole = "Standalone Server" }
  3 { $ComputerRole = "Member Server" }
  4 { $ComputerRole = "Domain Controller" }
  5 { $ComputerRole = "Domain Controller" }
  default { $ComputerRole = "Information not available" }
$OperatingSystems = Get-WmiObject -computername $Target Win32_OperatingSystem
$TimeZone = Get-WmiObject -computername $Target Win32_Timezone
$Keyboards = Get-WmiObject -computername $Target Win32_Keyboard
$SchedTasks = Get-WmiObject -computername $Target Win32_ScheduledJob
$BootINI = $OperatingSystems.SystemDrive + "boot.ini"
$RecoveryOptions = Get-WmiObject -computername $Target Win32_OSRecoveryConfiguration
$exServer = Get-ExchangeServer | where {$_.Name -eq "$Target"}
$exVersion = "Version " + $exServer.AdminDisplayVersion.Major + "." + $exServer.AdminDisplayVersion.Minor + " (Build " + $exServer.AdminDisplayVersion.Build + "." + $exServer.AdminDisplayVersion.Revision + ")"
switch ($ComputerRole){
  "Member Workstation" { $CompType = "Computer Domain"; break }
  "Domain Controller" { $CompType = "Computer Domain"; break }
  "Member Server" { $CompType = "Computer Domain"; break }
  default { $CompType = "Computer Workgroup"; break }
$LBTime=$OperatingSystems.ConvertToDateTime($OperatingSystems.Lastbootuptime)
$MyReport += Get-CustomHeader0 "$Target - Role(s): $($exServer.ServerRole)"
$MyReport += Get-CustomHeader "2" "Basic Server Information"
  $MyReport += Get-HTMLDetail "Computer Name" ($ComputerSystem.Name)
  $MyReport += Get-HTMLDetail "Computer Role" ($ComputerRole)
  $MyReport += Get-HTMLDetail "Exchange Role(s)" ($exServer.ServerRole)
  $MyReport += Get-HTMLDetail "Last System Boot" ($LBTime)
  $MyReport += Get-CustomHeaderClose
  Write-Host "..getting logical disk configuration"
  $Disks = Get-WmiObject -ComputerName $Target Win32_LogicalDisk
  $MyReport += Get-CustomHeader "2" "Logical Disk Configuration"
   $LogicalDrives = @()
   Foreach ($LDrive in ($Disks | Where {$_.DriveType -eq 3})){
    $Details = "" | Select "Drive Letter", Label, "File System", "Disk Size (GB)", "Disk Free Space", "% Free Space"
    $Details."Drive Letter" = $LDrive.DeviceID
    $Details.Label = $LDrive.VolumeName
    $Details."File System" = $LDrive.FileSystem
    $Details."Disk Size (GB)" = [math]::round(($LDrive.size / 1GB))
    $Details."Disk Free Space" = [math]::round(($LDrive.FreeSpace / 1GB))
    $Details."% Free Space" = Get-Ink ([Math]::Round(($LDrive.FreeSpace /1GB) / ($LDrive.Size / 1GB) * 100))
    $LogicalDrives += $Details
   $MyReport += Get-HTMLTable ($LogicalDrives)
  $MyReport += Get-CustomHeaderClose
  if ($exServer.ServerRole -like "*ClientAccess*")
  {$MyReport += Get-CustomHeader "2" "OWA Connectivity"
   Write-Host "..performing OWA connectivity test"
   $colOWAResults = Test-OwaConnectivity -ClientAccessServer $Target
   $MyReport += Get-HTMLTable ($colOWAResults | select MailboxServer, $hotLink, Scenario, $colourResult, $latencyMS, Error)
   $MyReport += Get-CustomHeaderClose
Write-Host "..getting queue details"
  if ($exServer.ServerRole -like "*HubTransport*")
  $MyReport += Get-CustomHeader "2" "Queue Information"
  $colQs = Get-Queue -server $Target
  $MyReport += Get-HTMLTable ($colQs | Select-Object NextHopDomain, $colourStatus, MessageCount, NextRetryTime)
  $MyReport += Get-CustomHeaderClose
  Write-Host "..getting mailbox database information"
  $spaceLog=[System.Diagnostics.EventLog]::GetEventLogs($target) | where {($_.LogDisplayName -eq "Application")}
  $db = @{Name="database";Expression={$_.ReplacementStrings[1]}}
  $freeMB = @{Name="MB";Expression={[int]$_.ReplacementStrings[0]}}
  $whiteSpace = $spaceLog.entries | where {($_.TimeWritten -ge $now.AddDays(-1))} | where {($_.EventID -eq "1221")} | select $db,$freeMB
  $ws = @{Name="White Space";expression={}}
  if ($exServer.ServerRole -like "*Mailbox*")
   $MyReport += Get-CustomHeader "2" "Mailbox Stores"
   $colMailboxStores = Get-MailboxDatabase -Server $Target -Status | Sort-Object Name
   $storeTable = @()
   Foreach ($objMailboxStore in $colMailboxStores)
    [string]$totalUsers = (get-mailbox -database $objMailboxStore).count
    [string]$empty = $totalUsers.Length -eq 0
    if ($empty -eq 'True')
     [string]$totalUsers = "0"
    $storeDetails = "" | Select Name, Mounted, "Total Users", "White Space", LastFullBackup
    $storeDetails.Name = $objMailboxStore.Name
    $storeDetails.Mounted = Get-Ink ($objMailboxStore.Mounted)
    $storeDetails."Total Users" = $totalUsers
    $storeDetails."White Space" = (($whitespace | where {$_.database -match $objMailboxStore.Name} | select -last 1).mb)
    $storeDetails.LastFullBackup = $objMailboxStore.LastFullBackup
    $storeTable += $storeDetails
    $MyReport += Get-HTMLTable ($storeTable)
   $MyReport += Get-CustomHeaderClose
   $MyReport += Get-CustomHeader "2" "MAPI Connectivity"
   Write-Host "..performing MAPI connectivity test"
   $colMAPIResults = Test-MAPIConnectivity -Server $Target
    $MyReport += Get-HTMLTable ($colMAPIResults | select Database, $newResult, $latencyMS, Error)
   $MyReport += Get-CustomHeaderClose
   $MyReport += Get-CustomHeader "2" "Mailflow Test"
   Write-Host "..performing Mailflow test"
   $colMailflowResults = Test-Mailflow -Server $Target
    $MyReport += Get-HTMLTable ($colMailflowResults | select TestMailflowResult, $MessageLatencyTime)
   $MyReport += Get-CustomHeaderClose
  Write-Host "..getting Exchange services"
  $ListOfServices = (gwmi -computer $Target -query "select * from win32_service where Name like 'MSExchange%' or Name like 'IIS%' or Name like 'SMTP%' or Name like 'POP%' or Name like 'W3SVC%'")
  $MyReport += Get-CustomHeader "2" "Exchange Services"
   $Services = @()
   Foreach ($Service in $ListOfServices){
    $Details = "" | Select Name,Account,"Start Mode",State,"Expected State"
    $Details.Name = $Service.Caption
    $Details.Account = $Service.Startname
    $Details."Start Mode" = $Service.StartMode
    If ($Service.StartMode -eq "Auto")
      if ($Service.State -eq "Stopped")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("Unexpected")
     If ($Service.StartMode -eq "Auto")
      if ($Service.State -eq "Running")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("OK")
     If ($Service.StartMode -eq "Disabled")
      If ($Service.State -eq "Running")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("Unexpected")
     If ($Service.StartMode -eq "Disabled")
      if ($Service.State -eq "Stopped")
       $Details.State = $Service.State
       $Details."Expected State" = Get-Ink ("OK")
     If ($Service.StartMode -eq "Manual")
      $Details.State = $Service.State
      $Details."Expected State" = Get-Ink ("OK")
     If ($Service.State -eq "Paused")
      $Details.State = $Service.State
      $Details."Expected State" = Get-Ink ("OK")
    $Services += $Details
    $MyReport += Get-HTMLTable ($Services)
   $MyReport += Get-CustomHeaderClose
    $eventLogs=[System.Diagnostics.EventLog]::GetEventLogs($Target) | where {($_.LogDisplayName -eq "Application") -OR ($_.LogDisplayName -eq "System")}
    $warningEvents = @()
    $errorEvents = @()
    $LogSettings = @()
$MyReport += Get-CustomHTMLClose
$fullReport += $MyReport
$MyReport = $null
$Date = Get-Date
$Filename = ".\" + "Exchange_Health" + "_" + $date.Hour + $date.Minute + "_" + $Date.Day + "-" + $Date.Month + "-" + $Date.Year + ".htm"
$fullReport | out-file -encoding ASCII -filepath $Filename
Write "Audit saved as $Filename"
Invoke-Item $Filename

please refer to my scripts below, it should get you started.
http://www.myexchangeworld.com/2010/03/powershell-disk-space-html-email-report/
http://www.myexchangeworld.com/2010/07/powershell-script-to-monitor-exchange-server-2010-services-email-report/
you can customsise this to your needs and add relevant information.
cheers
thiyagu
Thiyagu | MCTS/MCITP - Exchange 2007 | MCSE 2003[Messaging] | http://www.myExchangeWorld.com. This posting is provided "AS IS" with no warranties, and confers no rights.

1:N Replication Health Check

Hello,
When we run the check of 1:N Replication Health Check We are getting the following:
We cant replicate the tables mentioned in this report.
How should we proceed to fix this issue?
Thanks,
Amir

Hi Roy,
look at this note. it describes how to setup 1:n once you already created the config without "multiple usage" flagged.
Best,
Tobias
SAP Note 1898479:
SLT replication: Redefinition of existing DB triggers

Database Health Check Enquiry

Hi all,
Some enquires regarding database health check. I did some research regarding health check, got overwhelmed by the information available out there.
Currently I don't have any report on hand, but currently working and starting on one. This report serves as a report for reference, to understand if there's any database performance issue, and as a report for management.
Wish to check with you folks, what are the typical things that I can look at on a daily basis to understand my database health status, eg. Buffer Hitrate, database I/O etc, especially those that may/will contribute to impact on the database performance. Or is there any good reference link whereby I can do some readup regarding such a health check?
Thanks in advance for any input.
Eugene

Hi Eugene,
Well that's a pretty open question and I guess you will get a lot of replies which I look forward to monitoring as there should be some very interesting ones there.
Anyway, let me just open with one point that I have found very useful in the past. As regards Database Performance , you can look as much as you like at the statistics and a great deal of discretion is required in interpreting them but the real test for me of how well a database is performing is in terms of the user (or application) perception. Are the responses from the database good enough to meet the users expectations. Check the average response time for example and set guidellines for what is acceptable, very good response , very bad response etc.
I use this as a guideline so then once the database is perfoming in the sense that the user is satisfied (or better still happy with the performance) we can gather the statistics (from Oracle 10g onwards there are lots of tools built in like ADDM and AWR for gathering and storing the database statistics) and create baselines. Once we have baselines for a normally performing system, as soon as problems are reported we can run off a diagnostic tool like ADDM for that period , compare it against the baseline and look for the striking differences. From there we can start an analysis of individual numbers, buffer hit ratios etc. to delve further.
Hope this helps , I am sure lots of other people will chip in to this
Regards

DPM 2007/2010 Health Check Tools

Hi there,
I've had a look through the existing forum threads, but am unable to find an answer to my query.
I am looking to find a range of DPM health check tools, or Powershell Scripts, that would help me perform a Health Check on a 2007 environment, with a view to an eventual upgrade path to 2010/2012
I am hoping to avoid analysing each event ID and every backup operation in order to make a report to management.
Many thanks in advance
Rory

Hi,
This is the only DPM Health Check script available. Here is the link:
https://gallery.technet.microsoft.com/DPM-Health-Check-9628e68f
My Blog | www.buchatech.com | www.systemcenterportal.com
If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion
in a test environment before implementing!

Vmware vsphere health check report v5.1.0

Similar Messages

Maybe you are looking for