VNC with a modem and NOT a router

I know there have been similar questions to this but none reflect my situation. I want to use Chicken of the VNC to control my mother's computer as she is a rank newbie. She has a modem ONLY and there is no option for port forwarding.
I've read some methods that are beyond my experience involving Terminal sessions that frighten me off!
The ISP allocates a static IP but the modem allocates a 192.168.0 type of IP through DHCP which is greyed out and I can't change.
Can anyone help?

Open routers set up page ..... click status & see the firmware version ...... if required update ....download the latest firmware from http://www.linksys.com/download ........

Similar Messages

I have one PC with a modem and linksys router #BEFW11S4 i...

I have one PC with a modem and linksys router #BEFW11S4 installed. I have 3 other PC's which connect to it via Linksys wireless-G adapters. Things have been working just fine until recently when now at least twice a day my Pc's with the adapters lose connection with the router. Any suggestions?

Open routers set up page ..... click status & see the firmware version ...... if required update ....download the latest firmware from http://www.linksys.com/download ........

Ichat video works with some people and not others

Can someone help me? I can video Ichat with some people and not others. HOwever, if the people I can video ichat with put me in a three way chat with someone I can't Icaht video with, it works. Here is the first half of the error I get when I try to call someone with whom it doesn't work:
Date/Time: 2008-05-08 20:59:35.554 -0400
OS Version: 10.5.2 (Build 9C7010)
Report Version: 4
iChat Connection Log:
2008-05-08 20:59:21 -0400: AVChat started with ID 2203145046.
2008-05-08 20:59:21 -0400: scddean8: State change from AVChatNoState to AVChatStateWaiting.
2008-05-08 20:59:21 -0400: 0x1946a450: State change from AVChatNoState to AVChatStateInvited.
2008-05-08 20:59:24 -0400: 0x1946a450: State change from AVChatStateInvited to AVChatStateConnecting.
2008-05-08 20:59:24 -0400: scddean8: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-05-08 20:59:32 -0400: 0x1946a450: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: 0x1946a450: Error -7 (0x1946a450 cancelled the connection.)
2008-05-08 20:59:32 -0400: scddean8: State change from AVChatStateConnecting to AVChatStateEnded.
2008-05-08 20:59:32 -0400: scddean8: Error -7 (0x1946a450 cancelled the connection.)
Video Conference Error Report:
950.806728 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.000000 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK253ca464241b86c5
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 443
v=0
o=SDEAN 0 0 IN IP4 68.109.25.62
s=skiier526121
c=IN IP4 68.109.25.62
b=AS:2147483647
t=0 0
a=hwi:17412:2:2400
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 110
a=rtcp:16402
a=rtpmap:110 X-AAC_LD/22050
a=rtpID:163897054
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:160:120:320:240
a=framerate:20
a=rtpID:4247390608
0.130320 @SIP/Transport.c:347 type=2 (00000000/0)
[ACK sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK758f935e51030677
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.3
Content-Length: 0
0.131540 @SIP/Transport.c:2362 type=1 (00000000/0)
[SUBSCRIBE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.258925 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK3c1d470911bfc4fc
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>;isfocus
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0
0.266139 @SIP/Transport.c:347 type=2 (00000000/0)
[NOTIFY sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
Contact: <sip:[email protected]:16402>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.3
Content-Type: application/conference-info+xml
Content-Length: 0
[<c-i v="0" st="f" en="sip:user@lip:16402">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
0.267647 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK07f3cf2d27e5dc4f
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.3
Content-Length: 0
0.489410 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from 24.9.170.64:16402]
0.809558 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=98115.00, NSDev=6.54%]
1.049428 @:0 type=1 (00000000/1)
[Bandwidth Detection]
[Avg=1063830.90, NSDev=55.48%]
1.396681 @:0 type=1 (00000000/2)
[Bandwidth Detection]
[Avg=1218589.60, NSDev=19.06%]
1.555003 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 8
[SECUPD:0]
1.555264 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK7a3f72b46979010e
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 3 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
22.411383 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
Max-Forwards: 70
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
22.552977 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 68.109.25.62:16402;branch=z9hG4bK225017670f058825
To: u0 <sip:user@lip:16402>;tag=242696585
From: 0 <sip:user@lip:16402>;tag=1748993363
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
23.667085 @SIP/Transport.c:347 type=2 (00000000/0)
[MESSAGE sip:user@lip:16402 SIP/2.0
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
Max-Forwards: 70
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
[PING]
23.667857 @SIP/Transport.c:2362 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 24.9.170.64:16402;branch=z9hG4bK0d3ce7637235b638
To: 0 <sip:user@lip:16402>;tag=1748993363
From: u0 <sip:user@lip:16402>;tag=242696585
Call-ID: f7d46dbe-1d60-11dd-9664-c634114a4012@lip
CSeq: 4 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0

I found the following comment the other day that goes some way to explaining why iChat might have problems with some NAT routers:
http://www.technologyevangelist.com/2007/02/ichatav_the_bestun.html#comment-53326
While it doesn't offer any solutions it might be worth firing off some iChat feedback to Apple referencing it. It seems like it might be a trivial bug for Apple to fix and could well alleviate many of the problems people are having.
In the mean time if your router is one that has SIP ALG you could try disabling it and forwarding all relevant ports to your machine.

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

How do I determine if the memory problems are with my imac and not the RAM?

I've heard of some vague problems with intel imacs and their memory slots. I'm about to replace (for the 3rd time) RAM, and think I need to test further to see if the problem is with my imac and not the RAM. Right now I put back in the original 2-512 sticks that came with the imac, and the rember test is only showing 594mb (odd amt!) testing OK. But, in "about my mac" it will show as 1gb.
Problems I've had with each set of RAM: occasional KP's, excessive spinning beachballs, sudden closing of apps (esp. if I have several apps running), won't fax usually (will hear a fax tone instead of a dial tone at the onset), disappearing documents section under my username.
I bought this imac refurbed thru the apple store last fall: 2.16 C2D 20" imac
Any ideas before I have to separate myself from my imac to send it in??

Hi Toodles
The pin strips on the new modules maybe a little thicker than your original modules, and it's going to take more force to seat them properly. If the new Memory Specifications are correct I would try them again. Slide them in untill they stop, then push real hard untill you feel them seat into place.
I've never seen a report about an odd amount of ram shown. If reinstalling the ram modules does not solve your issue, and may be a indication that there is something wrong with one of the slots.
Dennis
17" iMac Intel Core Duo - 2GB Ram - Mac OS X (10.4.10) - Maxtor 300GB FireWire - Creative Inspire 2.1 - 2G Nano

When trying to view a pdf from IE10 I get a small square with an X and not the document.

When trying to view a pdf from IE10 I get a small square with an X and not the document. I have removed reader completely from the control panel and reinstalled version 11.0.4. I have IE 10 10.0.9200.16721. Need assitance in getting Reader XI setup.

Hi,
We have heard few users having similar issue as yours and found out the problem for one of the users is this: http://support.microsoft.com/kb/2716529 .
I was able to reporduce this problem(square with a 'X') by changing the TabProcGrowth registry entry to 0.
This tool provided by Microsoft is for Win 8, to run this on Win 7 you can manually change the registry setting : please see " Let me fix it myself" in above url.
Before running these steps please make sure yours indeed is the same problem.
Please be very careful as some registry settings (not this one) can create serious problems on a Windows system including causing it to no longer boo
Let me know how it goes.
Thank You.

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup

Does airplay mirror only work with the ipad2 and not ipad1

does airplay mirror only work with the ipad2 and not ipad1

But can it still stream video wirelessly?
For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
I'd like a wireless option.

Help export the graphic with transparent background and not braking the quality

hi I'd like some help please if its possible.
I've created a monitor graphic in Fireworks that looks like iMac and I would like to export it with transparent background.
the jpeg format looks great with no damage to the graphic at all but I can't have transparent background, although I changed the canvas fill to none. the png-8 format can apply transparent background, but damages the graphic.
Here are the previews
1st - the png-8 format
2nd - thejpeg format
A ny ideas on how I can export the graphic with transparent background and not braking the quality??

Fireworks questions are best answered at this link:
<http://forums.adobe.com/community/fireworks/fireworks_general>
Good luck.

I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??

I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??

Are you using a Mac? It sounds like you are using his computer to sync to. If this is the case, then it will sync to all of his stuff unless a new user is created with your personal stuff on it.
When you want to sync your iPhone to that computer, switch to your user first, and then everything will sync with your stuff. If he wants to hook up his iPhone to sync it, then he needs to switch back to his own username first.

Code works with Dreamweaver CS6 and not with CC

<p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
[Edited Title and moved to Dreamweaver- JTS]

I'm not quite sure I understand your point.
I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
<p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
</p>
Dreamweaver CC also adds the following code to the <head> of the page:
<script type="text/javascript">
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.adobe.com/products/dreamweaver
Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC.

Setup 1941 router with cable modem and 2 vlan?

hello everyone,
i need a little help setting up my new 1941 router with cable modem using 2 vlns.
this is what i have:
1- 1941 router configured as g0/0 wan port facing isp configured as (dhcp). g0/1 is lan facing the switch (192.168.1.1)
dhcp pool (192.168.1.x)
2- sg300-28pp switch.
3- wap371 AP/ 11pcs..
now everything is working perfect except sometimes we have more than 250 to 300 people trying to connect to the wifi, the router will have no enough ip addresses.
i heard that i can setup 2 vlans to solve this problem? and is there any setup that i have to do on switch and Access points?
please i will appreciate any little help
Regards

hello Andre Neethling i added network 192.168.0.0 255.255.254.0 to dhcp pool config and it seems that it is working but i am concern that i am going to have problem in the future so please take a look at the running config and let me know if i have everything done right. also we want to order static ip address from the provider for our security camera system and we will not longer receive dhcp ip from them and my router setup is to receive it as dhcp on g0/0 so what i should do about changing the settings on g0/0?
i appreciate your help
Building configuration...
Current configuration : 1163 bytes
! Last configuration change at 00:46:35 UTC Wed Apr 15 2015
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Abdullah
boot-start-marker
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
ip cef
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp pool Local
import all
network 192.168.0.0 255.255.254.0
default-router 192.168.1.1
multilink bundle-name authenticated
license udi pid CISCO1941/K9 sn FTX1523022E
redundancy
interface GigabitEthernet0/0
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
interface GigabitEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 101 interface GigabitEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
access-list 101 permit ip 192.168.1.0 0.0.0.255 any
control-plane
line con 0
line aux 0
line vty 0 4
login
scheduler allocate 20000 1000
end

How do I set up Airport Extreme with cable modem and router?

Hi--
I'm having a house built and all of the wiring for TV, phone, and internet will be centralized in a closet. The cable modem can be placed there as well. In one room in the basement I want to use my Airport Extreme for my iMac and USB external hard drives. In another location of the basement, I'd like to set up a Time Capsule for another desktop and USB printer. If the cat5e comes out of the wall at each location, I "think" I need a router at the closet location. I also thought I might need an Airport Express upstairs on first or second floor to boost signal for my laptop. The house isn't that big so maybe that's overkill. So beyond the router question, do I want to set up a roaming network and have the Airport Express connected via ethernet or just wireless if the thought is that I need this? Finally, if I should connect cable modem to router to Airport Extreme, Time Capsule, etc., in what order and ports does the equipment get connected? Many thanks!!

Welcome to the discussions, Forum Girl!
It would be best to position the cable modem and main router in the central location like the closet if possible. The other devices would connect via ethernet to the wall jacks in each room.
If you could setup a "roaming" wireless network as you mention, this will give you better wireless performance and coverage. This is the way commercial establishments like airports, businesses, etc. are configured for wireless.
The order of connection would go something like this: ethernet connection > cable modem >main router>devices. Devices could be computers, routers, a backup device, etc. Since the Extreme has only 3 LAN ports for ethernet connections, you will also need to plan to install an "ethernet switch" near the location of the main router to provide enough ethernet jacks. If you are planning to use DirectTV, etc or your audio/video devices require ethernet connections (most new products do for updates and extra features), be sure to plan for that as well.
Make sure that CAT5e or CAT6 wiring is run so you will be able to take advantage of faster gigabit speeds.
Finally, it would be a good idea to work with an IT specialist to go over your plans to make sure all the bases are covered. This would be money well spent.

I have a modem and a separate router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect?

I have a modem, and a separate (hard wired from modem) router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect? It does see the router in my wi-fi connections list - just won't connect. !

This article will provide a troubleshooting framework.
http://support.apple.com/kb/TS1398

VNC with a modem and NOT a router

Similar Messages

Maybe you are looking for