VO does not distinguish between subscript or superscript text

I find it strange that VocieOver in Mac OS X (10.5.8) does not distinguish between subscript and superscript. Subscript and superscript hold a lot of meaning and was wondering if there was maybe a setting somewhere that enabled subscript and superscript text to be easily identified.
Thanks

Hello, man with the spoof hobbitname,
Try doing it the other way around: put your legacy instruments in the main folder, after you've removed the new ones with the same names - including their samples folders.
*Like so:*
+(the folders are empty - I don't actually have them)+
It should work this way...
regards, Erik.

Similar Messages

OWB-Import does not distinguish between nls_length_semantics char and byte.

We have a 10g-DB with UTF8 charset and nls_length_semantics=char and we've created an OWB warehouse module for 10g with several tables in it. After deploy operation for a table the column length attributs are looking nice. But if we re-import this table the varchar fields have the threefold length!
This makes life hard for us, because sometimes it's necessary to reconcile discrepancies in development cycle and some tables have about 150 columns.
Does anybody have suggestions?
The OWB version is 10.1.0.3.0.
Regards
Ralf

Ralf,
Oracle stores the length of VARCHAR columns in two ways in its metadata. One is the length as required by the application, and the other is the length required to store UTF data.
One UTF character can take upto 3 characters of storage. When OWB reads in the definition from data dictionary, it uses the actual characters allocated to the column, and thus u see a three fold increase in VARCHAR columns.
Try this for your table
select
column_name, data_length, char_length
from
user_tab_columns
where
table_name='nameOfTable'
And that is how Oracle designed the database, but unfortunately OWB does not have that twin way of seeing things.
- Jojo

Sent mail does not sync between devices

My sent mail does not sync between devices. For example, if I send an email from my Iphone it does not show in my sent box on the MAC mail (postage stamp). If I send mail from MAC mail it does not show on my phone. But if I go to Yahoo (mail) I can see all sent mail.
What am I doing wrong? Is there a setting that allows them to snch sent mail??

From reports on this site, Yahoo mail doesn't work reliably with Mail. The following steps may help.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Mouse pointer does not move between monitors

my mouse pointer does not move between displays all of a sudden !

ok, I am using magic mouse, mac mini with two displays,
was working fine, but now when I started the computer recently it does not want to move the mouse to the other screen.
the other screen is open but it is not possible to move anything over to it !!
tried to restart reset the display settings etc. but no luck !!

My photos "favorites" folder does not sync between devices

my photos "favorites" folder does not sync between devices

Hi
Try Settings> Itunes & App Stores> Automatic Downloads - Turn on Music and Apps
http://www.apple.com/itunes/inside-itunes/2012/04/automatically-download-your-bo ok-music-and-app-purchases-to-the-devices-you-choose.html
This is how iPhone 4 works running on IOS 6.0.1...I'm less familar with iPAD 2
Cheers

OSX 10.6 does not differentiate between PS or illustrator .eps files

Have other people encountered this problem?
I have found that snow leopard does not differentiate between photoshop and illustrator .eps files in order to double click and open them.
Does anyone know how to correct this?

Hello Chris,
Thanks so much for clarifying about OSX 10.6 opening .eps files in illustrator or photoshop.
I was wondering if you knew out how
to create a droplet that opens multiple PDFs and saves as .gifs.
When I
try to do it, all of the .gifs end up having the same name as the file
that I created the script with, and a "-1" at the end.
Actually
there are two droplets that I want to create (to be able to
drop multiple pdf files):
Portrait/Square
script:
Final thumbnail file to be 51 pixels wide by (x?) pixels
tall
Final thumbnail file should be 72 dpi,
Final
thumbnail file should be flattened(no transparency in white areas),
Final thumbnail file should have a 1 pixel wide Grey border to all
sides
Final thumbnail file should be saved as a GIF file, RGB
Landscape script:
Final thumbnail file to be 65 pixels wide by (x?)
pixels tall
Final thumbnail file should be 72 dpi,
Final
thumbnail file should be flattened(no transparency in white areas),
Final thumbnail file should have a 1 pixel wide Grey border to all
sides
Final thumbnail file should be saved as a GIF file, RGB
Thanks,
Matthew
Date: Wed, 14 Apr 2010 14:48:11 -0600
From: [email protected]
To: [email protected]
Subject: OSX 10.6 does not differentiate between PS or illustrator .eps files
Given EPS files are "really" Illustrator files (Photoshop not being a
vector application), you probably want to make Illustrator the default.
No.
EPS files can be produced and read by many applications.
And most EPS files cannot be read by Illustrator.
Frequently EPS files in particular need to be edited in the application which created them (Freehand vs. AI vs. Quark gradients anyone?).
>

I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted landline number. My old Nokia many years ago used to show an arrow symbol when it was a call thats source was diverted. I really need to

I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted landline number. My old Nokia many years ago used to show an arrow symbol when it was a call thats source was diverted. I really need to know when a call has come from my landline so I can greet the caller in the appropriate way and also so I can be sufficiently short as I am getting charged for the call from my BT landline to my mobile.

That is not a feature that's available on the iPhone. Sorry.

Notes does not sync between iPhone 6 plus and iPad Air

The Notes app does not sync between iPhone 6 plus and iPad Air. These used to sync before when I had an iPhone 4. I have been trying to troubleshoot this for about an hour now, so all the basics such as deciding on a default Notes account, to turning on and off iCloud functions for both devices, as well as signing out of of my apple account on both devices, then back in. Nothing seems to be working - is this a fault in the current iOs?? It's driving me nuts.

You can't pair iOS devices.
that's not how continuity works.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

My CC account does not show my subscription. How do I fix that?

My CC account does not show my subscription that I have been paying for. It just says that I have a free account. So, now that I have a new computer (the old one died dramatically), I can't install Photoshop, Illustrator, bridge or indesign. I can't seem to get in touch with an actual adobe person who could fix this billing problem.

telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted number.

I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted number.

RKVN wrote:
I have my landline diverting to my iPhone. However, it does not distinguish whether the call has come from my diverted number.
Correct.
This has nothing to do with your iPhone.
Forwarded calls are not identified.

The lower row of my iphone does not respond to tapping. i.e. texting; the space bar, return

The lower row of my iphone does not respond to tapping. i.e. texting; the space bar, return and number tabs and for phone; emergency, 0, and delete tabs.
I've updated my phone, turned it off and on, charged it. Nothing. Help!

Sounds like a hardware problem. When you updated, that would have wiped the device and installed the latest iOS, thus pretty much eliminating a software issue. You could try to restore as new, i.e. without your backup and see if it works factory fresh. If still a problem, it's most likely a hardware issue.

WCCP does not work between WSA and ASA

I have configured WCCPv2 between WSA S160 ( 6.3.1-025) and ASA5540 (8.2(1)109).
Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
Does anybody have any idea what the problem is and how I can resolve it ?

IronPort Support team helped me to find the trouble:
If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
The WSA guide doesn't clearly say about it.
So the Discussion can be closed ...

Home Sharing does not work between a new computer and old computers

Hello Guys,
I recently brought a new sony vaio laptop however it does not seem to work with my current homesharing system. My old laptop and the old computers which worked together, still work fine across different versions of itunes including the newest one. However my new laptop has the new itunes but it doesn't work. The old computers/laptops can pick up the new laptop and homeshare across however this new one cannot sense any. All are on same network as well as all have been athorised and on same homesharing. Doesn't seem to be firewall either. Help Windows 8 to Windows Vista to iOS newest one.

Fixed my problem. I just needed to upgrade the firmware on my router.

Annotation does not transfer between android and windows....

I originally asked this question in June.
I bought a Kindle Fire.
I downloaded Adobe for Android.
I read some pdf's for work.
I annotated them.
I plugged the kindle into my desktop.
I opened a file explorer on my desktop and went to look at the annotated files on my desktop using Adobe 11 reader.
There was no annotation.
There was no annotation when I copied the file onto my desktop.
There still is annotation when I open the file on my kindle!!!!!!!!!!!!!!!!
There is no sync problem because I am not moving the file through the cloud.
I need the annotation to transfer so I can put it back into my library and continue using the annotated file for research and writing..
Unless this software can do this kind of an operation it is useless to me and severely limits my ability to use my kindle.
Is there a solution?
Is there an update?
My conversation in June was closed by staff after telling me to send the files to [email protected] because the discussion groups don't accept attachments.
They promptly neglected to reply to me.
I have searched my spam folder and found nothing.
Someone dropped the ball.....
please pick it up....
tell me what I have done wrong or that the software does not actually support this....
or someone who can get this software to work under the conditions I described above please tell me how they did it....
Awaiting your solutions.....
solvemyproblemnow

Hi,
We are still investigating this issue and wanted to share few initial results with you.
We are able to see this happening on device having Android version 4.4. Can you please confirm Android version on your device?
And the good news is that things start working fine if we restart the device before connecting to the desktop.
Quick steps you need to follow -
1. Restart your device
2. Now attach it to desktop
3. Try to open files having highlighted text.
It should work after following these steps. Please try and it should solve your problem for now.
Thanks

E4200/E3200 in bridge mode...Guest access works, but does not roam between routers...any ideas?

I have installed wireless in my church...main router is E4200 in the office set up as follows:
IP: 192.168.0.1
Subnet: 255.255.255.0
DHCP enabled (Range = 192.168.0.4-192.168.0.103)
Guest network enabled
Static DNS (for content filtering)
NAT: Enabled
Second router E3200 (in bridge mode) - connected LAN to WAN
IP: 192.168.0.2
Subnet: 255.255.255.0
Guest Network enabled
DHCP (obviously disabled)
Static DNS (for content filtering)
NAT: Enabled
Third router E3200 (in bridge mode) - Connected LAN to WAN
IP 192.168.0.3
Subnet: 255.255.255.0
Guest network enabled
DHCP (obviously disabled)
Static DNS (for content filtering)
NAT: Enabled
The 2 routers in Bridge mode are connected to a 16-port unmanaged switch (with other PCs, etc.), which is then plugged into the main router in Port 1.
SSIDs on all 3 routers are exactly the same for both main and Guest networks.
The main network works flawlessly. The router in the office hands out IPs in the 192.168.0.XX range and you can wander throughout the church and maintain a persistent Internet connection. File and print access works fine too from anywhere in the building.
For the Guest network, you can set up a laptop next to each router, obtain an IP address, reach the logon page and surf the Internet without issue. So, the Guest Network works fine from each router.
However, if you wander around the church while on the Guest network (such as with a smart phone), the following happens:
-On either of the E3200 routers (in bridge mode) you get the login page as you wander into the range of each router. I would have thought that if you logged in once, you would be good to go.
-You get a different IP from each router. On the E3200's in Bridge mode, you get a 192.168.33.XX address. Additionally, the gateway is 192.168.33.1. On the E4200 (main router) you get a 192.168.3.XX IP and a gateway of 192.168.3.1.
-As a result of getting different IPs, the smart phone becomes confused and generally won't connect to the Internet.
So, it looks like each router maintains a separate list of who has entered the correct password to get onto the Guest network. Additionally, it appears as if each of the 2 routers, supposedly in Bridge mode, is still handing out IP addresses on the Guest Network, rather than deferring to the router in the office like they do for the main network.
I have seen a lot of postings about how to put routers into Bridge mode and problems with the Guest Network, but posts that I've seen point to the Guest network not working at all, as opposed to this issue where it works; the bridged routers, though, continue to like to hand out IP addresses on it, making wandering around the church while connected to the Internet not possible while connected to the Guest network.
Anyone else experience as similar situation? Any possible solutions out there?
Thanks!
-Gil
Solved!
Go to Solution.

I do understand what you were trying to do here since you would like to have only 2 SSIDs (main & guest) for perhaps easy connectivity. The reason why you were not having problems getting online wirelessly when you were connected to the main network it’s because the computer was connected to only one DHCP server since the 2 bridge routers were just acting as a switch or a passthrough device. Now with guest network access it is a different scenario, a guest network is a virtual network meaning to say it’s like your having another router embedded on your router. Since it is a virtual network, then it does not follow the parameters of the main network, hence even if the router was set to bridge mode those routers will still have their own ip address of either 192.168.33.1 or 192.168.3.1.

VO does not distinguish between subscript or superscript text

Similar Messages

Maybe you are looking for