VO's and load balancing question

Hi guys,
As anyone got any experience in load balancing a web application using ADF BC's (EO's and VO's) and any problems that I face?
I am researching possible problems that will pop up while deploying my application. I want to have my app running on two servers and put some form of load balancer (hardware or software) in front of them. One issue I can think of is that when someone commits something on one server the VO cache on the other server will not get updated. This is a problem if there is a user on each server and they are both accessing the same row.
Regards
Barry
JDev: 10.1.3.2
JHS: 10.1.2.26

Hi,
this is what you want to read :
http://download-uk.oracle.com/docs/html/B25947_01/bcstatemgmt.htm#sm0318
You can handle state across instance of an AM within BC using a database
Frank

Similar Messages

  • Clustering problems and load balancing question

              I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
              machines, 2 App. Server machines and one database server machine. I have defined
              one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
              so it should be when I fix my problems!
              My questions/problems are the following:
              1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
              clusters? That is, the client-simulator machines send the requests to the software
              dispatcher which performs workload balancing between the 2 Weblogic clusters. The
              clusters perform round-robin amongst all instances. Note that the documentation only
              talks about Hardware Balancing.
              2. I am having problems with my multicast IP addresses. For instance, on one App.
              Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
              I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
              Time Out". I have used the utils.MulticastTest utility which shows the packets not
              being received:
              I (S1) sent message num 1
              I (S1) sent message num 2
              I (S1) sent message num 3
              I (S1) sent message num 4
              What am I doing wrong?
              3. Re. the cluster configuration:
              NOTE: I have executed my workload using 2 independent App. Server machines with a
              software dispatcher - no clustering. Each App. Server used a jdbc connection pool
              of 84 database connections. The db connections happened to become my bottleneck.
              When I tried to increase the number of connections in the jdbc pool, throughput decreased
              dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
              of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
              not been that simple a task - probably because I am totally new to the Web Application
              Server world!
              Here is what I've got so far:
              I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
              I wish to run within the cluster. All servers in the cluster use port number 80.
              There is a corresponding DNS entry for each IP address. My base assumption is that
              one of these instances will double up as the Administration Server... Is it true,
              or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
              (each with a connection pool of 84 database connections for a total of 252 database
              connections)?
              Do I need to re-deploy my applications for the cluster? And if so, would this explain
              why I am having problem starting my Admin Server?
              I think this is it for now. Any help will be greatly appreciated!
              Thanks in advance,
              Guylaine.
              

              Guylaine Cantin wrote:
              > I am using Weblogic 6.1. My Windows NT environment consists of 10 web client-simulator
              > machines, 2 App. Server machines and one database server machine. I have defined
              > one cluster on each app. server. Each cluster is running 3 Weblogic instances, or
              > so it should be when I fix my problems!
              >
              > My questions/problems are the following:
              >
              > 1. Can I use a software dispatcher to perform workload balancing between the 2 weblogic
              > clusters? That is, the client-simulator machines send the requests to the software
              > dispatcher which performs workload balancing between the 2 Weblogic clusters. The
              > clusters perform round-robin amongst all instances. Note that the documentation only
              > talks about Hardware Balancing.
              >
              We also support software load balancers (for e.g. resonate)
              The software dispatcher should be intelligent enough to decode the
              cookie and route the request to the appropriate servers. This is
              necessary to maintain sticky load balancing.
              > 2. I am having problems with my multicast IP addresses. For instance, on one App.
              > Server machine, I am using the multicast IP address: 239.0.0.1 for MyCluster. When
              > I start the Admin Server, I get a JDBC error: "... multicast socket error: Request
              > Time Out". I have used the utils.MulticastTest utility which shows the packets not
              > being received:
              >
              > I (S1) sent message num 1
              > I (S1) sent message num 2
              > I (S1) sent message num 3
              > I (S1) sent message num 4
              > ...
              >
              > What am I doing wrong?
              >
              You should run the above utility from multiple windows and see if each
              of them being recognized or not.
              i.e. java utils.MulticastTest -N S1 -A 239.0.0.1
              java utils.MulticastTest -N S1 -A 239.0.0.1
              > 3. Re. the cluster configuration:
              >
              > NOTE: I have executed my workload using 2 independent App. Server machines with a
              > software dispatcher - no clustering. Each App. Server used a jdbc connection pool
              > of 84 database connections. The db connections happened to become my bottleneck.
              > When I tried to increase the number of connections in the jdbc pool, throughput decreased
              > dramatically. Thus, I decided to add a cluster of Weblogic instances to each one
              > of my 8 x 900Mhz machines in order to scale up. Unfortunatly, adding clusters have
              > not been that simple a task - probably because I am totally new to the Web Application
              > Server world!
              >
              You have to stress test your application several times and set
              maxCapacity of the conn pool accordingly.
              > Here is what I've got so far:
              >
              > I have obtained 3 static IP addresses for the 3 instances of Weblogic instances that
              > I wish to run within the cluster. All servers in the cluster use port number 80.
              > There is a corresponding DNS entry for each IP address. My base assumption is that
              > one of these instances will double up as the Administration Server... Is it true,
              > or do I need to define a separate Admin server if I wish to run 3 Weblogic instances
              > (each with a connection pool of 84 database connections for a total of 252 database
              > connections)?
              BEA recommends to use Admin server for administrative tasks only
              like configuring new deployments, jdbc conn pools, adding users etc..
              It's not a good idea to have admin server part of cluster.
              >
              > Do I need to re-deploy my applications for the cluster? And if so, would this explain
              > why I am having problem starting my Admin Server?
              >
              You have to target all your apps to the Cluster.
              > I think this is it for now. Any help will be greatly appreciated!
              >
              > Thanks in advance,
              >
              > Guylaine.
              >
              

  • BIP and Siebel server - file system and load balancing question

    1. I just need to understand whenever the reports are generated through BIP, are there reports stored on some local directory (say Reports) on the BIP server or Siebel File system? If on a File system how will archiving policy be implemented.
    2. When we talk of load balancing BIP Server. Can the common load balancer be used for BIP and Siebel servers?
    http://myforums.oracle.com/jive3/thread.jspa?threadID=335601

    Hi Sravanthi,
    Please check the below for finding ITS and WAS parameters from backend :
    For ITS - Go to SE37 >> Utilities >> Setting >> Click on ICON Right Top Corner in popup window >> Select Internet Transaction Server >> you will find the Standard Path and HTTP URL.
    For WAS - Go to SE37 >> Run FM - RSBB_URL_PREFIX_GET >> Execute it >> you will find PRefix and PAth paramter for WAS.
    Please refer to this may help step-by-step : How-to create a portal system for using it in Visual Composer
    Hope it helps
    Regards
    Arun

  • Cache and Load Balancing with Oracle APEX Listener

    Hi,
    I intend to use only HTTP access.
    How to implement a Cache and Load Balancing with the Oracle APEX Listener?
    Is it possible to do with the the standalone running APEX Listener?
    Thanks by advance for any tips/documentation/references.
    Kind Regards.

    Hi,
    I think this question is best asked in the APEX Listener forum:
    ORDS, SODA & JSON in the Database
    Kind regards
    Sandro

  • SO Load Balancing Question

    Hi all,
    I have a service object (SO1) which has been set to Load Balancing.
    This service object has an attribute which serves as a number allocator
    (NA1).
    This NA1 provides a unique number across the whole application for each of
    the record that require to store into DB.
    The problem is, will the NA1 get replicated if the SO1 is replicated?
    If yes, will NA1 crash?
    Regards,
    Martin Chan
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Senior Analyst/Programmer
    Dept of Education and Training
    Mobile : 0413-996-116
    Email: martin.chandet.nsw.edu.au
    Tel: 02-9942-9685

    Hi Serge,
    Could you prefix it with the PID of the load balanced process ?No I can't. At least not at the moment.
    When a service object is replicated, it is automatically replicated into adifferent partition...
    Thanks.
    An advice, make the NA1 shared. So if you get to do multithreaded accessto
    it, you won't screw up things.I am thinking it may be better off to create it as a service object on it's
    own.
    How is the number returned by the NA1 generated ?It gets generated by Forte's code.
    ... Try to make it so that the
    load balanced partitions don't need to access the database more than onein
    5 min. to get a new Seed Key. This would not need to PID.Thanks for your advise.
    Regards
    Martin Chan
    -----Original Message-----
    From: Serge Blais [mailto:Serge.BlaisSun.com]
    Sent: Tuesday, 3 April 2001 14:17
    To: Chan, Martin
    Subject: RE: (forte-users) SO Load Balancing Question
    Your right, they can generate the same number. How much control do you have
    over the ID being generated? Could you prefix it with the PID of the load
    balanced process ?
    Just a note: When a service object is replicated, it is automatically
    replicated into a different partition, possibly on the same machine or on a
    different one.
    An advice, make the NA1 shared. So if you get to do multithreaded access to
    it, you won't screw up things.
    How is the number returned by the NA1 generated ? If NA1 is using a stored
    procedure, or something like:
    Start TRX
    read number
    newnumber = number+5000
    write back newnumber
    End Trx
    Something like will be very safe. The Database Index Table is taking care
    of the critical section. Then you can be sure that each replicate can be
    independent (not hit into each other) for 5000 iterations. Depending on the
    frequency, you may want to up this number or lower this number. Too high it
    would make the key very high very soon with wholes in the sequence. Too low
    and you would have hit between the replicates. Try to make it so that the
    load balanced partitions don't need to access the database more than one in
    5 min. to get a new Seed Key. This would not need to PID.
    Serge
    At 01:59 PM 4/3/2001 +1000, you wrote:
    Hi Serge,
    The number return by the NA1 is used as a primary key for each of therecord
    that stores in the DB.
    The Number Allocator NA1 is required to access to DB to update an ID table
    which carry the next available sequence number. NA1 will only update this
    table for every 5000 records.
    For example, the initial value of the sequence is: 1
    The next update will change the value to 5001, next will be 10001 and soon.
    >
    The properties of this NA1 class at runtime
    Shared - Disallowed
    Distributed - Disallowed
    Transactional - Is Default
    Monitored - Disallowed
    Unfortunately, this attribute is not a handle but is instantiated by theSO1
    itself.
    I have been thinking, if SO1 is replicated within the same partition, and
    each replicate will carry its own NA1. NA1 and the replicate of NA1 may
    return a same number if their initial values of the sequence are the same.
    Correct?
    Regards
    Martin Chan
    -----Original Message-----
    From: Serge Blais [mailto:Serge.BlaisSun.com]
    Sent: Tuesday, 3 April 2001 13:11
    To: Chan, Martin; forte-userslists.xpedior.com
    Subject: Re: (forte-users) SO Load Balancing Question
    Let's see if I understand right.
    You have a service object that keep a handle to an object that either keep
    state information, or that generate state information. Now the thing to
    figure out is which is it. Let's assume that NA1 is a number generator,
    that does not need to be synchronized or that doesn't need to access any
    external resource. It would still work, depending on the algorythm you are
    using.
    Will they share the same NA1? It depends on the nature of NA1, but for sure
    NA1 would have to be an anchored object. An if multiple partitions would
    share the same object "only" for key generation, you would bring down your
    performance on key generation or key update (by adding one inter-process
    call).
    In short:
    1. Many scenarios can happen, you need to be clearer on your description.
    2. If you are sharing an object by load balanced partitions, this greatly
    reduce the gain of load balancing the partition.
    3. If NA1 is keeping state, any access to it would need to be controlled
    "shared".
    Have fun now...
    Serge
    At 12:30 PM 4/3/2001 +1000, Chan, Martin wrote:
    Hi all,
    I have a service object (SO1) which has been set to Load Balancing.
    This service object has an attribute which serves as a number allocator
    (NA1).
    This NA1 provides a unique number across the whole application for each
    of
    the record that require to store into DB.
    The problem is, will the NA1 get replicated if the SO1 is replicated?
    If yes, will NA1 crash?
    Regards,
    Martin Chan
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Senior Analyst/Programmer
    Dept of Education and Training
    Mobile : 0413-996-116
    Email: martin.chandet.nsw.edu.au
    Tel: 02-9942-9685
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comSerge Blais
    Professional Services Engineer
    iPlanet Expertise Center
    Sun Professional Services
    Cell : (514) 234-4110
    Serge.BlaisSun.comSerge Blais
    Professional Services Engineer
    iPlanet Expertise Center
    Sun Professional Services
    Cell : (514) 234-4110
    Serge.BlaisSun.com

  • VPN device with dual ISP, fail-over, and load balancing

    We currently service a client that has a PIX firewall that connects to multiple, separate outside vendors via IPSEC VPN. The VPN connections are mission critical and if for any reason the VPN device or the internet connection (currently only a T1) goes down, the business goes down too. We're looking for a solution that allows dual-ISP, failover, and load balancing. I see that there are several ASA models as well as the IOS that support this but what I'm confused about is what are the requirements for the other end of the VPN, keeping in mind that the other end will always be an outside vendor and out of our control. Current VPN endpoints for outside vendors are to devices like VPN 3000 Concentrator, Sonicwall, etc. that likely do not support any type of fail-over, trunking, load-balancing. Is this just not possible?

    Unless I am mistaken the ASA doesn't do VPN Load Balancing for point-to-point IPSec connections either. What you're really after is opportunistic connection failover, and/or something like DMVPN. Coordinating opportunistic failover shouldn't be too much of an issue with the partners, but be prepared for lot of questions.

  • Web Dispatcher - Reverse Proxy and Load Balancing

    I'm finding limited docs on Web Dispatcher with regard to reverse proxy and load balancing.  Are you aware of some recent presentations or docs in this area?  The info on help.sap.com is not what I'm looking for.
    Thanks.

    Hi,
    best thing is that you look at your scenarios and test the web dispatcher against each of it, like:
    - SSL
    - Portal only
    - Web Dynpro ABAP / Java
    - BSP
    - Different backend systems like SRM, MDM
    - Several backends with 1 Web Dispatcher
    After getting a list of use cases that you can test quite easily (installation of Web Dispatcher is done fast and can be done on a local PC), you can contact SAP Support and ask them about the specific problems and questions you encountered. This way, you'll get the official answer, sometimes they will even inform you about "secret" parameters and options.
    As of the reverse proxy functionality: there are several version of Web Dispatcher available that differ from the functionality offered. The latest version - 7.2 - is the one that offers the most, i.e. allows you to create rewrite rules like Apache.
    SAP Note 908097 - SAP Web Dispatcher: Released releases and applying patches
    br,
    Tobias

  • Reverse Proxy and Load Balancer for SMP 2.3 and Agentry Application

    Hi Expert,
    I'm putting in place a mobile solution composed by SMP 2.3 SPS 4 and SAP ECC 6.0. In the SMP 2.3 I created the agentry server and I have deployed my agentry application.
    My SMP/Agentry infrastructure is composed by two servers therefore I need a load balancer for balance the load into the several servers. Furthermore I need to use a reverse proxy in my DMZ zone.
    Based on what indicated in the SAP note "1904213 - SAP Mobile Platform Server Release Information" the Apache Reverse Proxy is not supported for Agentry clients. Agentry uses nginx for Reverse Proxy.
    I also found the following document How-to-Guide for Reverse Proxy and Load Balancing in SAP Mobile Platform 3.x that explain how to set-up a reverse proxy and load balancer with nginx and apache.
    Both the SAP note and the HOW to document are refereed to SMP 3.0 and not to SMP 2.3.
    I would know if the NGINX must be used also for SMP 2.3.
    Any suggestion/information is appreciated.
    Thanks in advance
    g.

    Please see Agentry Network Landscapes

  • Cache and Load Balancing for the Oracle APEX Listener

    Hi,
    I intend to use only HTTP access.
    My database is Oracle 11gR2, SE, 32 bit.
    How to implement a Cache and Load Balancing with the Oracle APEX Listener?
    Is it possible to do with the the standalone running APEX Listener?
    Thanks by advance for any tips/documentation/references.
    Kind Regards.

    Error. To be closed.

  • Cache and Load Balancing for Oracle APEX Listener

    Hi,
    I intend to use only HTTP access.
    The database I use is Oracle11gR2 SE 32bit.
    How to implement a Cache and Load Balancing with the Oracle APEX Listener?
    Is it possible to do with the the standalone running APEX Listener?
    Thanks by advance for any tips/documentation/references.
    Kind Regards.

    Error. To be closed.

  • PIX Redundant Internet Line and Load balancing

    I would like to find out if it's possible to configure my Cisco PIX 525 to use a secondary internet line from a different provider and perform load balancing. I'm using PIX Version 6.3(1)

    PIX version 6.3 does not support Redundancy and load balancing. but PIX/ ASA with version 7.0 supports Redundancy.

  • Data Centre Interconnection - firewall and load balancer deployment

    Hi all,
    I've read lots of Cisco docs/white papers on DCI - Layer 2 extension between DCs, but as yet I cannot find any decent information on how best to deploy firewalls and load balancers in such a design. I've seen refs to FHRP isolation on Nexus 7k (and possible 6k if you use DCI block) but nothing on the services elements.
    The services element seems to be a complete minefield here:
    - active/standby across sites, or deploy resilient pairs in each site?
    - how to align optimal traffic flows inbound and ooutbound (RHI, SNAT, etc.)
    - best practice suggestions ideally.
    Cisco DCI docs seem to always gloss over the fact that most customers would have to deal with firewalls and load balancers here, and simply refer to 'coming soon' for that info.
    If anyone has any good suggestions/links to docs explaining detailed implementation info would be much appreciate
    Thanks
    Phil

    You might want to check out this new product called ITD.
    Simple and faster solution:
    ITD provides :
    ASIC based multi-terabit/s L3/L4 load-balancing at line-rate
    No service module or external L3/L4 load-balancer needed. Every N7k port can be used as load-balancer.
    Redirect line-rate traffic to any devices, for example web cache engines, Web Accelerator Engines (WAE), video-caches, etc.
    Capability to create clusters of devices, for example, Firewalls, Intrusion Prevention System (IPS), or Web Application Firewall (WAF), Hadoop cluster
    IP-stickiness
    Resilient (like resilient ECMP)
    VIP based L4 load-balancing
    NAT (available for EFT/PoC). Allows non-DSR deployments.
    Weighted load-balancing
    Load-balances to large number of devices/servers
    ACL along with redirection and load balancing simultaneously.
    Bi-directional flow-coherency. Traffic from A-->B and B-->A goes to same node.
    Order of magnitude OPEX savings : reduction in configuration, and ease of deployment
    Order of magnitude CAPEX savings : Wiring, Power, Rackspace and Cost savings
    The servers/appliances don’t have to be directly connected to N7k
    Monitoring the health of servers/appliances.
    N + M redundancy.
    Automatic failure handling of servers/appliances.
    VRF support, vPC support, VDC support
    Supported on both Nexus 7000 and Nexus 7700 series.
    Supports both IPv4 and IPv6
    N5k / N6k support : coming soon
    Blog
    At a glance
    ITD config guide
    Email Query or feedback:[email protected]

  • What does per Wlan Band select and load balancing do ?

    Good morning.....We recently upgraded our controllers from 4.2.185 to 6.0.188 and have noticed many clients having connectivity issues. We have Aggressive load balancing turned off globally but have noticed that band select and load balancing are enabled on the
    Wlan. Are these settings mutually exclusive or do they do the same thing ?  Does the Wlan setting override the default ? We have noticed that there is
    output doing "debug dot11 load-balancing"
    Thanx.....Dave

    I believe we never had load balancing turned on when running 5.2 code. We jumped from 5.2 to 6.x temporarily and then to 7.0 within a 30 day time frame this summer. We're a large university and we had very few users on WiFi during that time.
    The Macintosh laptops are having nothing but trouble since school began, and I have gone over everything and found that band select is turned on as well as load balancing. Since band select didn't exist in 5.2 (I believe) I know it wasn't on. As for load balancing, I don't believe it was on, and I discovered it was turned on when recently reviewing our configs.
    The Macintosh laptops have been debugged and our Mac gurus tell us they're getting a message that equates to "the AP is busy, or the AP is full". This leads me to believe that load balancing got turned on during the upgrade and we didn't notice, which caused the Macintoshes to have issues.
    We don't have any VoWiFi clients so we don't have to support them, and we don't officially support smartphones, either.
    I turned off load balancing and will see how it goes....
    Thanks!

  • ARFC: Single Server and Load Balancing

    Hi All,
    I am trying to create aRFC model. In SAP logon screen, I can see two tab pages - Single Server and Load Balancing.
    Can you please let me know when we have to use which tab?
    Thanks
    TG

    Single Server Connect or Load Balancing connect is completely independend from the location where SAP Gui Client is installed.
    Single Server connect means that your are directly connecting to an ABAP Server using hostname and systemnumber you have to provide.
    Load Balancing Connect means that you specify the message server of the central instance of an ABAP Server group. The SAPGUI first connects to the message server which will provide the SAPGUI with the information about the best performing ABAP server. SAPGUI will then connect to this ABAP server.
    Single Server is suitable for small landscapes with lets say less than 4 application servers. In huger configurations (and those which I know will grow to more than 3 servers)I would prefer to use logon groups - aka Load Balancing.
    Peter

  • Reverse Proxy plug in and Load Balancer Plug in

    Hi,
    Can anyone please provide me with an example obj.conf file showing how to combine the reverse proxy plug-in and Load Balancer plug-in.
    I would like to use the reverse proxy plug in to detect when static content is requested and provide this from the web server. Requests for dynamic content would then be forwarded to an Application server via the Load balancer plug-in. I have found plenty of documentation on how to configure these plug-in separately but nothing on how to combine the two.

    smiking
    reverse proxy plugin - its job is to forward the requests to another server for a specific task. you can use the webserver 7 . it does forward and limited load balancing (using round robin ) based on the number of servers you provide in the configuration. i would say this is a poor man's setup.
    load balancer plugin - some app servers like sun java system app server or web logic provide this plugin so that you can effectively use the back end app server
    with both these setup, you can <if> constructs to determine which requests need to be forwarded to the back end server.
    I wonder, why do you need both - if both of them is designed to do the same thing.

Maybe you are looking for