Vocabulary maintenance during 4.6C-ECC6

Hi Experts,
We are doing upgrade project from 4.6C to ECC6.
Since we are MDMP system so we have to maintain system vocabulary.
We have copied PRD system to a sandbox SDB. in SDB 4.6C, we did the vocabulary maintain task and export the vocabulary as a transport request (table contents of UM4PMDIT), after that, SDB was upgrade to ECC6 successfully.
Currently we are starting to upgrade PRD now, my question is: do we need to manually maintain the system vocabulary again in PRD or just import the transport request which contain the exported vocabulary in SDB?
Thank you in advance.
Fresh_man

Hi Fresh_man,
You can import that transport into production to avoid manual steps again.
Thanks,
Siva Kumar

Similar Messages

ZSearch Help: will it remain during upgradation from ECC6 to higher version

Hi,
During upgarde from ECC6 to higher versions, will zserach help be moved to higher version automatically or will it be removed and I have to create ZSearch Help again in the higher version.
What about the ZTable, will it be there in higher version or I need to create it again in the higher version.
Thanks,
Priyanka.

Hello Priyanka
Upgrading your SAP system will <b>not affect</b> your Z-objects <b>directly</b>.
However, if your Z-objects reference (i.e. use) SAP standard objects that are changed (or, rarely, are deleted) during upgrading then you may have to adjust your Z-objects. Therefore, keep your (automatic) test scripts available (e.g. eCATT) and run them immediately after the upgrade has been finished.
Regards
Uwe

Table Maintenance, during upgrades

Experts,
How do we handle table maintenance generator screens and t-codes during upgrades (for Z tables)? Do they come up in the SPAU list post upgrade or is there anything to do in SPDD during ACT_<version> stage?
Tx, in adv.

Hi,
Shaji is correct. Table maintenances are corrected after the upgrade is applied by the BASIS team. You will just have to re-test those table maintenances.
If you are also doing Unicode Conversion as well. Then you need to make sure to set Unicode Checks Active for the function pool related to your table maintenance.
i.e you have in table maintenance stored in function group ZMYFUNC. Then you need to go to the "generated" function pool SAPLZMYFUNC and set Unicode Checks Active.
Unless your table maintenances have lots of custom logic in them, you generally would not encounter any errors at all.

Error during installation of ECC6- system call failed

Dear all,
i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
thank
ERROR      2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
           syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
TRACE      2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
           handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE      2009-03-17 10:07:25.813
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException

problem fix after reboot the server

Report writer issue during upgrade to ecc6

Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve it as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma.

Hi all,
On generating report of report writer through GR5G (we are regenerating because we were getting dump for this report after up gradation from 4.6c to ecc6)we found one syntax error. The error is in auto generated program we can see that error but cant fix it as it needs a key and maybe that might not also be the right method to resolve it as auto generated codes should not be touched . So what would I like to ask is how can error come in auto generated program and how do I fix it (error is in data declaration QUOTDATE_MAX(08) TYPE C VALUE '). Here u can see that instead of only is used there is no closing inverted comma.

For an SAP enterprise(4.7), how to add java stack during upgrade to ECC6.0?

Source release: an R/3 4.7 32bit
Target release: ECC6.0 64bit (abap+java)
My plan is to go over the following upgrade steps:
4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.
Is this the best way?
Thanks a lot!

Hi,
Its always best to go to the enhanced and latest version.
_+4.7 32bit-> ECC abap only 32bit ->ECC abap 64bit -> install java stack.+_
the above step will increase only only the cost.
If ur going for just practice purpose, then no issues u can go for it.
But its always good to go for
4.7------> Ecc(ABAP + JAVA) together.
coming to 32bit and 64 bit. Some constraints are there. If u look at Ecc 6- SR3, it will only support 64 bit.
Look at all those sections and go for upgrade.
Regards,
Ravi

Error in phase START_SHDI_FIRST during upgrade to ECC6

Hi Expert,
When I upgrade from R3 46C to ECC6NU on Windows server 2003 64bits with SQL SERVER 2005 64bits, in phase START_SHDI_FIRST, it is failed.
Here is the log:
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Apr 08 17:18:28 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      01
M sid        BXT
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    80
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        2516
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 2516) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          20608     (896)
M DpShMCreate: sizeof(tm_adm)          4663200     (23200)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm)          552064     (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1496)
M DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Tue Apr 08 17:18:29 2008
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:404
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Apr 08 17:18:32 2008
I MtxInit: 21 0 0
M SHM_PRES_BUF               (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA          (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA          (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM               (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM          (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM   (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA   (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR   (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S    using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c   205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c   211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c   217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A
A Tue Apr 08 17:18:33 2008
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:18:33 2008
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code TEXTENV_INVALID.
A Module $Id: //bas/700_REL/src/krn/runt/ablocale.c#3 $ SAP.
A Function DoSetTextEnv Line 225.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when generating text environment..
A
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
S *** ERROR => sap_dext: Spoolworkprocess aborted! [rspodynp.c   113]
S T100-key: SY   , type '65'
S variable 0: Error when generating text environment.
S Exitcode 4
S *** ERROR => restarting work process (spool will not work after sap_dext [rspodynp.c   135]
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c   15883]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 4, th_errno 5, action 2, level 1) [thxxhead.c   10169]
M
M Info for wp 21
M
M    stat = 4
M    reqtype = 5
M    act_reqtype = 5
M    rq_info = 8576
M    tid = 21
M    mode = 0
M    len = 2040
M    rq_id = 14
M    rq_source = 1
M    last_tid = 21
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    control_flag = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M    vm = no VM
M
M Modeinfo for User T21/M0
M
M    tm state = 2
M    uid = 22
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >000<
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    imode = 0
M    mode state = 0x42
M    mode clean_state = 1
M    task_type = ZTTASPO
M    lastThFc = THFCSPO
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 5
M    rollout_reason = 0
M    last_rollout_level = 0
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 0
M    roll state = 2
M    abap state = 2
M    em state = 3
M    eg state = 1
M    spa state = 3
M    enq state = 0
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    tcode = >                    <
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 000007FF51285070
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M    async_receives = 0
M    vm = no VM
M
M Adresse   Offset Data from input buffer
M -
M 0000000010EE2C00 000000 00000000 02000000 4a000000 00000000 |........J.......|
M 0000000010EE2C10 000016 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C20 000032 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C30 000048 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C40 000064 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C50 000080 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C60 000096 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C70 000112 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C80 000128 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2C90 000144 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CA0 000160 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CB0 000176 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CC0 000192 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CD0 000208 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CE0 000224 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2CF0 000240 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D00 000256 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D10 000272 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D20 000288 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D30 000304 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D40 000320 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D50 000336 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D60 000352 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D70 000368 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D80 000384 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2D90 000400 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DA0 000416 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DB0 000432 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DC0 000448 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DD0 000464 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DE0 000480 00000000 00000000 00000000 00000000 |................|
M 0000000010EE2DF0 000496 00000000 00000000 00000000 00000000 |................|
M -
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M Entering ThSetStatError
M ThIErrHandle: incomplete previous roll out, do a full roll out
M ThRollOut: roll out T21/U22/M0/I0 (level=7, short_roll_out=0)
M ThRollOut: call rrol_out (1)
M ThRollOut: act roll state = DP_ROLLED_OUT
M ThRollOut: roll level <> 0, don't call ab_rollout
M ThRollOut: full roll out of U22 M0 I0 (Level 7) ok
C SQLBREAK: DBSL_CMD_SQLBREAK: CbOnCancel was not set. rc: 1
M ThIErrHandle: don't try rollback again
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=1)
M ThIErrHandle: Entering ThReplyToMsg
M ThIErrHandle: Entering ThErrHdlUser
M ThErrHdlUser: set th_errno (5)
M ThErrHdlUser: save context
M ThEmContextDetach2: detach T21/M0 from em memory (em_hdl=0, force=0)
M ThEmContextDetach2: reset local em info
M call ThrShutDown ...
B Disconnecting from ALL connections:
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 021 000 R/3              000000000 INACTIVE     NO YES NO 000 255 255 20080408 171829 SHSAPSRV05
B Disconnected from connection 0
B statistics db_con_commit (com_total=6, com_tx=1)
B statistics db_con_rollback (roll_total=2, roll_tx=1)
M ***LOG Q02=> wp_halt, WPStop (Workproc21 2516) [dpnttool.c   327]
trc file: "dev_w21", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Tue Apr 08 17:19:07 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\put\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\put\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\put\exe\dbmssslib.dll' is "700.08", patchlevel (0.72)
B New connection 0 created
M sysno      01
M sid        BXT
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    80
M intno      20050900
M make:      multithreaded, ASCII, 64 bit, optimized
M pid        832
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc21 832) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          20608     (896)
M DpShMCreate: sizeof(tm_adm)          4663200     (23200)
M DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm)          552064     (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1496)
M DpShMCreate: sizeof(wall_adm)          (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010610050, size: 5329360)
M DpShMCreate: allocated sys_adm at 0000000010610050
M DpShMCreate: allocated wp_adm at 0000000010611AB0
M DpShMCreate: allocated tm_adm_list at 0000000010616B30
M DpShMCreate: allocated tm_adm at 0000000010616B90
M DpShMCreate: allocated wp_ca_adm at 0000000010A89330
M DpShMCreate: allocated appc_ca_adm at 0000000010A8D980
M DpShMCreate: allocated comm_adm at 0000000010A8F0F0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B15D70
M DpShMCreate: allocated gw_adm at 0000000010B15DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B15E20
M DpShMCreate: allocated wall_adm at 0000000010B15E30
X
X Tue Apr 08 17:19:08 2008
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host shsapsrv05
M calling db_connect ...
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C Thread ID:3980
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\put\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      72
C    patchcomment MSSQL: Thread check in DbSlDisconnect (969143)
C np:(local) connection used on SHSAPSRV05
C CopyLocalParameters: dbuser is 'dbo_shd'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28000000 bytes), 500 dynamic statements (2752000 bytes), total 30752088 bytes
C Using shared procedure name cache SHSAPSRV05_BXT_BXT_SHD_MEM initialized by another process.
C Connected to db server : [SHSAPSRV05] server_used : [np:(local)], dbname: BXT, dbuser: dbo
C pn_id:SHSAPSRV05_BXT_BXT_SHD
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080408 171908 SHSAPSRV05
C Warning: Env(MSSQL_SERVER) [SHSAPSRV05] <> Prof(dbs/mss/server) [shsapsrv05]. Profile value will be used.
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 21 0 0
M SHM_PRES_BUF               (addr: 0000000017540050, size: 4400000)
M SHM_ROLL_AREA          (addr: 000007FFF3410050, size: 59801600)
M SHM_PAGING_AREA          (addr: 0000000017980050, size: 32112640)
M SHM_ROLL_ADM               (addr: 0000000019830050, size: 598700)
M SHM_PAGING_ADM          (addr: 00000000198D0050, size: 525344)
M ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 0000000019960050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at 00000000199B0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 21 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 21, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 000000001E830160, size: 30000000, end: 00000000204CC4E0)
B dbtbxbuf: Buffer TABLP (addr: 00000000204D0160, size: 10240000, end: 0000000020E94160)
B dbexpbuf: Buffer EIBUF (addr: 0000000020EB0170, size: 4194304, end: 00000000212B0170)
B dbexpbuf: Buffer ESM   (addr: 00000000212C0170, size: 4194304, end: 00000000216C0170)
B dbexpbuf: Buffer CUA   (addr: 00000000216D0170, size: 3072000, end: 00000000219BE170)
B dbexpbuf: Buffer OTR   (addr: 00000000219C0170, size: 4194304, end: 0000000021DC0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012DFAFB0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0000000029DA00C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029DA06E0
S    using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1184 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 5744kb, dir_size: 5656kb.
A Attached to PXA (address 000007FFF6D20050, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FE7E000 leng=20955136 end=000007FF5127A000)
A >> Shm MMADM area (addr=000007FF5024A2E0 leng=261120 end=000007FF50289EE0)
A >> Shm MMDAT area (addr=000007FF5028A000 leng=16711680 end=000007FF5127A000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 23982 bytes at 0000000029EC0050
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\put\BXT\DVEBMGS01\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\put\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E
E Tue Apr 08 17:19:09 2008
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M ThCheckPrevUser: clean previous user T21/U22/M0/I0/V-1
M
M Modeinfo for User T21/M0
M
M    tm state = 2
M    uid = 22
M    term type = 0x2
M    display = 0x0
M    cpic_no = 0
M    cpic_idx = -1
M    usr = >SAPSYS      <
M    terminal = >                    <
M    client = >000<
M    conversation_ID = >        <
M    appc_tm_conv_idx = -1
M    session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    ext_session_id = >4607E181F7C64060AFEFDB1D30B83BCE<
M    imode = 0
M    mode state = 0x42
M    mode clean_state = 1
M    task_type = ZTTASPO
M    lastThFc = THFCSPO
M    lastAction = TH_IACT_NO_ACTION
M    th_errno = 5
M    rollout_reason = 0
M    last_rollout_level = 7
M    async_receives = 0
M    cpic_receive = 0
M    em handle = 0
M    roll state = 3
M    abap state = 3
M    em state = 2
M    eg state = 1
M    spa state = 3
M    enq state = 0
M    next hook = T-1/U-1/M255
M    master hook = T-1/U-1/M255
M    slave hook = T-1/U-1/M255
M    debug_tid = 255
M    debug_mode = 0
M    mode type = 0x1
M    debug = 0
M    tcode = >                    <
M    client conversation_ID = >        <
M    server conversation_ID = >        <
M    lock = 0
M    max enq infos = 0
M    act enq infos = 0
M    em_hyper_hdl = 000007FF51285070
M    plugin_info = NULL
M    act_plugin_hdl = -1
M    act_plugin_no = 0
M    max_plugin_no = 0
M    async_receives = 0
M    vm = no VM
M
M ThCheckPrevUser: reset spa state for user T21/U22/M0
M LOCK WP ca_blk 276
M LOCK APPC ca_blk 92
M set task type ZTTASPO
M ThCleanPrevUser: clean U22 T21 M0 I0 V-1 from previous wp
M ThCleanPrevUser: saved MODE_REC = 40
M PfStatDisconnect: disconnect statistics
M ThRollIn: roll in T21/U22/M0/I0 (level=7, abap_level=1, attach_em=1)
M ThCheckEmState: check ATTACH for em hdl 0
M ThCheckEmState: call EmContextAttach (em_hdl=0)
M ThRollIn: U22 M0 I0 (Level 7) ok
M ThRollIn: roll in abap store
M ThIAMDel: delete tid/mode 21/0 (th_errno 23, release 1)
M ThTSCancel: set T21/M0 in status MODE_CANCEL
M ThIDeleteMode (21, 0, 3, ><, 0, 255, TRUE)
M ThIDeleteMode: no modes found ..
M    no sub modes
M ThSUsrDel: delete system user
M RstrNotifyUserChange: user/client = (SAPSYS      /000)
M ThResFree: free resources of U22 M0 I0 (normal mode, complete free) at level 3, errno=23, db_action=TH_DB_NO_ACTION, pooling=1
M ThResFree: reset spa state for user T21/U22/M0
M ThCallHooks: call hook >HttpClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >abRtmClearSession< for event BEFORE_SESSION_CANCEL
M ThCallHooks: call hook >SpoolHandleHook< for event BEFORE_SESSION_CANCEL
M PfStatDisconnect: disconnect statistics
M ThDealComm: T21/U22/M0 has no cpic conns
M clean up all internal modes of T21/U22/M0
M call ab_endmode (END_MODE_CLEAR_ALL)
M RstrNotifyUserChange: user/client = (SAPSYS      /000)
M ***LOG R47=> ThResFree, delete (001023) [thxxmode.c   1357]
M ThVmcCleanMode (deleteOfMainMode=1, AoS=0)
M ThSesGetSessionType: no associated entry
M ThSesIsJavaSessionId: no associated entry
M ThVmcCleanMode o.k.
M ThGetEnqInfo: no enq info found
M ThVBIRollBack: initialize TH-hooks
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_COMMIT
M SosRegisterHook: add hook >ThVBICmRbHook(00000000005BE2C0)< for event AFTER_ROLLBACK
M ThRmLocQueue: no async request found
M ThPageFree: free (22,0,0, mode = 3)
M ThRollFree: free (22,0,0, mode = 3)
M ThRmFree: cleanup resources for T21 M0
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000001068DEC8/0000000000000000/0/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21 M0
M ThRmFree cleanup resources for T21
M RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 0000000010693420/0000000000000000/1/1/0
M RmCleanUpResources3: no resources registered
M ThRmFree: reset eg state of T21
M ThIEmFree: delete hyper context (hyperHdl=000007FF51285070)
M ThIEmFree: call EmContextDelete (em_hdl=0)
M ThResFree: save spa pointer 000007FFF3135B20 and install dummy spa
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >dyKeyTableReset< for event AFTER_COMMIT
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M ThISend: (tm/type/info = 21/0x41/0x0, mode_deleted=1)
M abap strategy ROLL / O.K.
M ThRqOutCheck: o.k.
M ThNewWpStat (type=0x41, task_switch=1, inline_hold=0, hand_shake=0, debug=0, ..)
M ThNewWpStat: new MODE_REC = 0x40
M ThNewWpStat: set mode wait
M ThNewWpStat: new state of T21/M0 = 0x49
M ThISend: new wp stat: 0x2
M rdisp/wp_auto_restart = 0 sec
M rdisp/wp_abap_restart = 0
M ThSetThToolParam : restartable_wp[0] = FALSE
M ThSetThToolParam : restartable_wp[1] = TRUE
M ThSetThToolParam : restartable_wp[2] = TRUE
M ThSetThToolParam : restartable_wp[3] = FALSE
M ThSetThToolParam : restartable_wp[4] = TRUE
M ThSetThToolParam : restartable_wp[5] = TRUE
M ThSetThToolParam : restartable_wp[6] = TRUE
M ThMkReq: send output to canceled mode
M ThDtWpBlk: detach WP ca_blk 276
M ThISend: complete stat record
M ThISend: stat_state = TH_STAT_WRITE
M ThISend: th_wp_waits_for_rq = TH_WP_WAITS_FOR_RQ
M make DISP owner of wp_ca_blk 276
M DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 49)
M -OUT- sender_id WORK_PROCESS      tid 21    wp_ca_blk   276     wp_id 21
M -OUT- action    SEND_TO_DP        uid 22    appc_ca_blk -1      type NOWP
M -OUT- new_stat WP_WAIT           mode 0     len         8       rq_id 49
M -OUT- req_info CANCELMODE
M REL APPC ca_blk 92
M ThDtAppcBlk: detach APPC ca_blk 92
M PfClearAllRec: clear statistic area
M PfStatDisconnect: disconnect statistics
M ThISend: set inPrivMode = 0 for T21/M0
M ThSysUsrCheck (1,1): check system user T21/U22/M0
M ThIEmFree: em state of T21/M0 (em_hdl=-1) is DP_EM_NO_CONTEXT
M ThSysUsrCheck: clear T21
M DpITmSlotClear: clear slot 21
M DpListRemove: elem 21 not in tmadm_free_list
M DpListInsert: elem 21 already in tmadm_inuse_list
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_TASK_SWITCH
M TrThHookFunc: called for task switch
M ThCallHooks: call hook >ImcResetPtr< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >DbgBeforeTaskSwitch< for event BEFORE_TASK_SWITCH
M ThCallHooks: call hook >HttpResetPtr< for event BEFORE_TASK_SWITCH
M save task type/act rqtype ZTTASPO/5 of T21/M0
M TskhLoop: switch back to normal tracel level 1
A
A Tue Apr 08 17:19:27 2008
A *** ERROR => TEXTENV_INVALID environment: [ablocale.c   205]
A *** ERROR => Locale=`unsupported' Lang=`E' [ablocale.c   211]
A *** ERROR => Country=`0AU' CodePage=`6200'. [ablocale.c   217]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c   13168]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Tue Apr 08 17:19:28 2008
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Tue Apr 08 17:19:28 2008
Please help me out!
Thank you very much!
Edited by: lucy YANG on Apr 8, 2008 11:31 AM

Check to see whether the profile parameter "zcsa/system_language" is set to a value other than D or E in the instance or default profile of the shadow system. If this is the case, change this parameter to D or E. Stop the shadow system and repeat the phase.
How to Stop and Start Shadow sytem :
Stopping the shadow instance
           Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
             R3up (SAPup) stopshd
           Alternatively, you can stop the shadow instance as follows:
             <upgrade_directory>/<SID>/homeshd/< SID>/stopsap DVEBMGS<SHDSYSNO> r3
           where <SHDSYSNO> is the instance number of the shadow system.
Starting the shadow instance
           Start R3up (as of Basis 700: SAPup) as the user <sid> adm as follows:
             R3up (SAPup) startshd
           Alternatively, you can start the shadow instance as follows:
             <upgrade_directory>/<SID>/homeshd/< SID>/startsap DVEBMGS<SHDSYSNO> r3
           where <SHDSYSNO> is the instance number of the shadow system.
Edited by: Shaji Jacob on Apr 8, 2008 4:38 PM

How to switch back to old depreciation calc method during upgrade to ECC6.0

Hi Everyone,
We are doing a technical upgrade from 4.6C to ECC 6.0 and we have activated the enterprise extension EA-FIN via SWF5 (switch framework) to use the functionality of accrual engine, closing cockpit etc. However, activating EA-FIN has activated the new depreciation calculation method (Period based depreciation calculation) which, we do not want. We still want to continue using old depreciation method (transaction based depreciation calculation).
So, is there a customization that turns off the new depreciation calculation? Or an OSS note? I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place. Is that how it is? Had anyone got into this issue before? Please help me in this regard.
Thanks in advance,
K

You already found your answer on the Wiki:
I read in SDN Wiki and it said, one has to post a customer message (OSS) to SAP and they in turn provide the notes to switch back to old depreciation method and also it is mentioned that these notes are not available in service market place.
What is not clear about that?

Address Maintenance during new Co Code Creation

Dear Experts,
I am implementing some new additional company codes in our system. We went live few years back and have got a requirement for few new company codes to be setup.
When I copy creation of a new company code using EC01, an address pointer gets created in Table T001 in field ADRNR. However the problem for me is the value in this ADRNR field in my development system is not the latest available number in Production System. The number in Development system is already in use in Production system.
So when I send the transport request to Prod system, the ADRNR field with the value overwrites the existing address data there. In Prod system that ADRNR value might represent a vendor address or a customer address.
My question is how to tackle this ADRNR creation at the time of copying a new Co Code using EC01?
Please provide your expertise.
Regards,
Sanjay Barnwal

Hello
Can you re set the current number in number range series in SA01, No 01 in DEV at par to Prod
go to T code SA01
go to ststus
change the current number in DEV as per PROD.
Thanks
Kameshwar Rao

Spool table space maintenance during mass print of forms

Hi Experts,
I need a solution to this as a high priority. Can you guys please help ? I am doing mass prints of forms where the form data is being passed on to the spool tables. How this spool table space is managed ?? Where the smart form data is being stored in the spool tables ?
Thanks,
GM.

pls check out this table ITCPO - SAPscript output interface
regards
nag

SPUM4 Vocabulary

Dear All,
We are in the process of sap upgrade 4.6 C à ECC6.0 Combine Upgrade and Unicode Conversion (CU and UC).
The active languages in our system UK,CS,DE,EN,FR,HU,IT,DLA,PL,NL,NO,PT,SK, RU,ES,FI,SV.
As per sap note 756535(SAP Vocabulary for Vocabulary Maintenance for SPUMG & SPUM4), we have auto assigned Vocabulary delivered by SAP.
And then as per sap note: 871541(Frequently used text patterns), we have imported SAP delivered frequently used text patterns extracted from 11 European and Asian languages.
Also after assigning all vocabulary provided by sap, there are still 65000+ words which are not covered by the any of the provided language vocabulary.
Is there any sap standard way/notes/guides to handle this situation and assign language for remaining 65000 words as this information is not provided in the guide.
Thanks & Regards
Rahul

Hi Rahul,
There are various methods to maintain the vocabulary with the correct language keys (which are also listed in the CU&UC guide):
a. Import of existing vocabulary (see SAP note 756535)
b. Language dependent scan (optional - would skip it for PRD)
c. Creation and use of hints (see SAP Note 1034188)
d. Statistical methods based on technical attributes (not available for 4.6c)
e. Statistical methods (see SAP note 756534 / not available for 4.6c)
f. Use of vocabulary patterns (see SAP note 871541)
g. Manual Maintenance (made by native speakers)
For all automatic or semi-automatic methods it is important to check the result with native speakers. This is especially valid for methods b) u2013 f). The manual maintenance should be executed by native speakers.
The sequence of the methods listed above can be used as a hint how to do sequencing during the actual maintenance (of course this is just a proposal - variations are possible). It is pretty clear, that e.g. the manual maintenance should be minimized and therefore should be executed at the end of the list. On the other hand side, existing vocabulary (SAP vocabulary and / or customer vocabulary from earlier scans) should be added at the beginning of the vocabulary maintenance.
For some of the methods described in b. to f. it is possible that the results are not as expected and words are assigned wrongly. Therefore customers need to check the outcome after each step and it is advisable to decide whether to skip the step or make use of it.
In your case it might be useful to have a detailed look into point c: Hint creation
Vocabulary words caused by Company Code dependent tables can be usually assigned to a specific language via company code. Therefore in case of many vocabulary words from this type of tables, it might be useful to create according hints. SAP Note 1034188 lists some more fields (next to company code BUKRS), which are capable to be used for assigning the language via hints. However it needs to be verified with application experts that the selected attributes can be used properly to assign a code page.
Usually it makes sense to create hints only for tables, which contribute a high number of words in the vocabulary. This can be identified via report UMG_VOCABULARY_STATISTIC or UM4_VOCABULARY_STATISTIC
It is recommended to execute UMG_DISTRIBUTE_ASSIGNED_LANGS (see SAP Note 938374) after using the hints.
Best regards,
Nils Buerckel
SAP AG

MDMP 46C Combined UC/UPG, vocabulary assignment required pre-upgrade?

I have a question about SPUM4 when doing an Combined UC&UPG on a 46c system.
As per the manual you have to run all the scans to complete SPUM4 in Prepare before starting the upgrade.
But do you have to perform the language assignment of the vocabulary list before the upgrade?
Is it possible to do this using SPUMG after the upgrade?
Basically I am being pushed for time and the project team is not ready to do the language assignments during Prepare. So it would be easier for me if I could do the scans and collate all the information required then perform the upgrade. Once the upgrade is complete, then allow the upgrade team to assign the languages post upgrade using the SPUMG transaction.
I am right in thinking that the vocabulary list has to be completely processed before conversion, this is because the words will use the global fallback which may not be right?
Thanks
Chris

Hi Chris,
you have to do the vocabulary assignment in the SPUM4 environment (on 4.6c), if you decide to use CU&UC. In CU&UC it does not make sense to do the assignment after the upgrade.
In case you go for TU&UC, you have to do the upgrade first and then do the vocabulary assignment.
Regarding vocabulary maintenance:
It would be possible to even leave ALL language fields empty in the vocab and go on with the scans. However this will probably produce millions of entries in the reprocess logs (after the reprocess scan), which cannot be handled. The same will be valid for transaction SUMG, which needs to be executed after the conversion (see UCG). This will result in a completely meaningless test for the SPUM4/SUMG.
If your scope for this test is 100% concentrated on export / import downtime, then this might make sense. However if you are looking for a complete CU&UC test, this does not make sense.
On the other hand side, there are only a few customers who really manage to maintain the vocab 100% - so a small percentage of unassigned words is usually left over. But the goal should be, to get this as low as possible !
Normally in the first trial, the number of the unassigned words in the vocab can be relatively high. But the result of the reprocess scan can be used to assign additional words in the vocab (and rerun the reprocess scan after additional maintenance).
Of course this will take time ! But if you want to avoid problems with many reprocess logs and repair logs, I would recommend to spend some time on maintenance of the vocab.
What happens, if a word is not assigned in the vocab ?
1) It will produce at least one (probably multiple) reprocess logs
2) R3load will use the fallback code page for the conversion of one or multple entries and it will write a message in the according xml-file
3) In SUMG, the according entries (again one or multiple) will show up in the manual repair
Best regards,
Nils Buerckel
Solution Management
Globalization Services
SAP AG

CJS-30196 Connect to SAP gateway failed: Error during installation

Dear Experts,
Please Help me with the following error i am getting during installation of ECC6 with MAXDB,
ERROR 2009-08-04 08:28:43
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=node1 SYSNR=03 GWHOST=node1 GWSERV=sapgw03 PCS=1
LOCATION    CPIC (TCP/IP) on local host with Unicode
ERROR       partner 'node1:sapgw03' not reached
TIME        Tue Aug 04 08:28:43 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2764
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1
ERROR 2009-08-04 08:28:43
FCO-00011 The step createADSUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_ADS|ind|ind|ind|ind|2|0|createADSUser was executed with status ERROR .
Regards,
Ritesh Bhatia

Hi Guys,
I am installing Ecc6 on my laptop. While installing i have got a below error...
ERROR 2012-01-24 06:58:02
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A
ASHOST=ecc6 SYSNR=04 GWHOST=ecc6 GWSERV=sapgw04 PCS=1LOCATION
CPIC (TCP/IP) on local host with UnicodeERROR       partner
'ecc6:sapgw04' not reachedTIME        Tue Jan 24 06:58:02
2012RELEASE     700COMPONENT   NI (network interface)VERSION
38RC          -10MODULE      nixxi.cppLINE        2764DETAIL
NiPConnect2SYSTEM CALL connectERRNO       10061ERRNO TEXT
WSAECONNREFUSED: Connection refusedCOUNTER
ERROR 2012-01-24 06:58:02
FCO-00011 The step createJSF with step key
NW_Onehost
ind
ind
ind
ind
0
0
NW_Onehost_System
ind
ind
ind
ind
1
0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind
|ind|ind|ind|3|0|createJSF was executed with status ERROR .
Could you please provide some solution for this?
with regards
Vinayak

Dump in ecc6

hello!
During upgrade to ECC6 , i came across a problem i function group Z_MM.
there is new include WSTR_LMEDRUCKF1H, this include is missing in our prod syst in 46C.
In this include there is field USER_EXIT_EINE which is not defined, and is part of
class CL_EXITHANDLER method get_instance in the changing parameters, it has type any.
I tried to defined it in the top include, but i dont know how to do it.
does anyone has a clue?
regards
yifat

The data type 'Any' will accept all types.... Try the below one...
DATA INSTANCE TYPE REF TO CL_EXITHANDLER.
DATA SEEX_FALSE TYPE BOOLEAN .
DATA IMP_EXISTING TYPE BOOLEAN.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
EXPORTING
    EXIT_NAME                     = 'HRBAS00INFTY'
    NULL_INSTANCE_ACCEPTED        = SEEX_FALSE
IMPORTING
    ACT_IMP_EXISTING              = IMP_EXISTING
CHANGING
    INSTANCE                      = INSTANCE
EXCEPTIONS
    NO_REFERENCE                  = 1
    NO_INTERFACE_REFERENCE        = 2
    NO_EXIT_INTERFACE             = 3
    CLASS_NOT_IMPLEMENT_INTERFACE = 4
    SINGLE_EXIT_MULTIPLY_ACTIVE   = 5
    CAST_ERROR                    = 6
    EXIT_NOT_EXISTING             = 7
    DATA_INCONS_IN_EXIT_MANAGEM   = 8
    OTHERS                        = 9.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,

Email down for maintenance?

why can't apple do "routine" maintenance during non-business hours? why can't they give us advance notice? we are, after all, paying for this email - it ain't free.
iMac G4 Mac OS X (10.3.7)

If no advance notice was provided at the .Mac website, this is probably not "routine" maintenance even though it is being called "routine".
Regardless the ISP or email account provider, server problems can and do occur which usually don't last long.

Vocabulary maintenance during 4.6C-ECC6

Similar Messages

Maybe you are looking for