Vocal comp I have recorded sounds delayed

Hello everyone,
I need some help with delayed playback...
the audio sounds delayed and I am worried about the overall groove so I would like to have this thing clear before I can start mixing
I am sure that there must be a proper solution than just moving the track randomly on the timeline by ear....
these are my current settings:
Thanks a lot

Check the output settings in GarageBand's preferences > Audio/Midi pane.
And in the System Preferences > Sound  panel.
Also check the settings in Audio Midi Setup Utility.

Similar Messages

  • N81 8gb sound delay in java and sis games

    Hi i need some answers about this problem. There is a 0.75 second sound delay when i try and play any java or sis, sisx game, even the new ngage demos have this sound delay, i am not the only one having this problem either, check out ngage forum and there are at least 5-10 who say they also have this sound lag. Could anyone have any ideas if this will be remedied in fw updates or will have to send my phone off and hope it is replaced with a unit which does not have this problem, if it is replaced at all. I have called nokia careline and they have no record of any such bugs but i find this amzing to hear, if it is a faulty batch shouldnt nokia post this on their web pages so consumers can do something about it, after all enough people are mentioning this problem its not just me. Any help is welcomed.
    regards

    Well, 0.75 seconds isn't too bad. I have a few suggestions. Don't keep too many applications on, Don't use up too much battery power and don't use all the memory of your memory card.
    That's right people, I'm back. Where have I been? I have been getting a life, away from this electric madness.

  • I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks

    I have recorded a vocal track, but have no playback sound. The meter shows it's there, but no sound even after un-muting the track. I'm using Garage Band 10.0.2/Mac Mini ~Thanks

    Check the output settings in GarageBand's preferences > Audio/Midi pane.
    And in the System Preferences > Sound  panel.
    Also check the settings in Audio Midi Setup Utility.

  • I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

    I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.  I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it).  The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

    Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes  with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
             I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

  • Garageband - "System Overload. The audio engine was not able to process all required data in time. (-10011). Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play.

    Im making a song on Garageband and I have recorded guitar, drums recorded on the musical keyboard, and vocals. It now says this, and won't play. Ive worked so hard on this and I don't know how to fix it. I am not very skilled or knowledgable in computers and barely know how to operate Garageband as it is. I have many different tracks in this song for different drums and beats. Please someone tell me how to fix this, I'm not even finished it! And again I am not very informed on how to work computers as well as most of you are, just saying. thanks!!!
    P.S.: In my about this mac thing, it says i have version 10.9.1, 2.26 GHz Intel Core 2 Duo, and Memory is 2 GB 1067 MHz DDR3

    Could you do this?
    Go to Finder
    Go to Applications
    Go to Utilities folder
    Launch Activity Monitor app
    go to its Memory tab on top
    tell us what you see at the very bottom?
    Here is a sample of mine.
    I bet your page/swap amount will be huge.
    If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time.

  • Says I can't import recorded sound into iMovie because I the files don't have iLife preview

    Hi,
    I am trying to either record sound directly onto iMovie to use as a voiceover or record on Garageband and then import it to iMovie. I have not found a way to record on iMovie, so I was trying to do it on garageband, but when I try to open the file on iMovie, it says I can not because it does not have iLife preview. I have a new Macbook Pro with Retina Display.
    Thank you!

    Hi avalewinter,
    Welcome to the Apple Support Communities!
    I understand that you would like to record a voiceover directly in iMovie. To accomplish this, please use the instructions located in the attached article.
    iMovie (2013): Add audio and music
    Record a voiceover
    You can record your own narration to add to your movie.
    Position the playhead where you want to start recording in the timeline, and choose Window > Record Voiceover.The voiceover recording controls appear below the viewer.
    To adjust the recording settings, do any of the following:
    To change the input device: Click the Voiceover Options button, and choose an option from the Input Source pop-up menu.
    To adjust the input level of the microphone: Click the Voiceover Options button, and drag the Volume slider right to increase the volume of what is being recorded, or left to decrease it. You can monitor the audio levels by using the built-in audio meter on the Record button. You should set the volume so that the audio meter in the microphone (the Record button) stays green, even when your voice is at its loudest.
    To mute sound from other clips while recording: Click the Voiceover Options button, and select the Mute Project checkbox.
    To start recording, click the Record button.
    To stop recording, click the Record button again (or press the Space bar).The recorded audio appears as a new clip in the timeline, above the background music. The voiceover clip is attached to the clip that was below the playhead when the recording was started. The track is named VO: Movie Name - Date, where “Movie Name” is the name of your movie, and “Date” is the date of the recording.
    Click the close button to dismiss the voiceover recording controls.
    Best regards,
    Joe

  • Movies I record with the iphone have no sound

    I've recorded a few movies with the iphone where the sound was fine, and now suddenly the last few have no sound when I play them back. I know I'm not covering the microphone...they are next to the charging dock on the bottom...
    any ideas??

    Connect to iTunes.
    Do a sync as each sync makes a back up.
    When done click restore this time instead of sync (right there in iTunes)
    It will reinstall the OS.
    You can restore from back up to see if just the fresh OS fixed it and thus your backup will be put back too with all your data.
    If doesn't fix, repeat but when it asks ifyou want to use backup, say no this time and restore it as a new phone.
    If that still fails, then take it to Apple.
    Restoring is what they suggest first and they will try in the store as well if you didn't.

  • HT1430 I have no sound playing videos from YouTube or playback of videos recorded with this iPad. Suggestions please

    Hello, I have no sound playing videos and no sounds when playing videos r escorted with this iPad. Sound. Is turned on under settings would appreciate any help please

    Sound is not turned on in Settings (except for alerts). Sound is controlled by the volume up and down buttons on the side of the iPad (in portrait mode). Make sure that sound is turned up with those buttons.
    Another thing to check: if earphones are plugged in the iPad speaker is silenced.

  • IMovie HELP! I can't record sound!

    AAARGH!!! I really HATE my Mac lately. So I'm doing a school project, making a documentary, right? And iMovie is working just fine. I can record sound, put in pictures, the usual. Then, I added a picture to the beginning of the 7:00(ish) minute documentary, and deleted the narraration to redo it, as I had added something and made some changes. It was very delayed, and kept getting messed up. So, I turned my computer (Mac OSX Lion) off and back on again. This allowed me to fix the problem I had with the beginning, but now iMovie won't let me record sound at the end of the project. I tested my microphone, and it's fine, so there's not a problem there. I also started a new iMovie Project, and it allowed me to record sound there, as well. Please help me! I really need to finish this project!!! What could possibly be wrong with my program? What can I do to fix it?!

    The fireware port on the A2 soundcard is something completly separated. There is no direct connection in between those two (soundcard and fireware port), the fireware chip it is just added on the board and is sharing the same PCI slot/intrerupt. If you want is exactly like another fireware port from motherboard or add-on card.
    So you will need an extra software to capture the digital sound via fireware, Creative is providing just the hardware (the driver is generic in WindowsXP). I am using my fireware port to capture video from my miniDV camcorder.
    For you I think you have to look into the mixer software.
    Message Edited by SoNic2367 on 0-6-2006 07:35 PM

  • Recording using Delay Designer

    I am new to logic, so please forgive me if this is obvious. I am using Delay Designer to play with tape looping, using one if the simple infinite repeat presets. When I record i only get the exact notes that I am playing, not the delay sounds. I tried bouncing the track to audio but that didn't help, the same exact notes were recorded. On the same track i am using Space Designer and all of that information seems to be captured in the recording. Is there any way to do what I am trying to do? Or is Delay Deisgner only provided for performance in MainStage?

    Sorry it has taken me so long to get back to this. You English is not at all the problem! I finally was able to make this work. It took me quite a while to realize that the volume knob next to the bus had to be up to get the aux track effects. Thanks alot, this is great to know and it got me going with using a bus.
    But I still have the original question. Now I have three instrument tracks and I have recorded a set of staggered bits on each one. When I hit play I hear the delay and reverb effects just like I want. What I am still not getting is how to I record what that sounds like if I let it play for a full minute? Do I have to do some kind of routing to an audio track and record that for a full minute or something? I am not seeing how to do this.

  • Problem with sound delay from mic to speakers with quickplay on HP Pavilion dv5-1145ev

    I have an HP Pavilion dv5-1145 ev. When I try to use karaoke with HP's quickplay there is a significant sound delay from the microphone to the speakers. I also noticed the same delay, even when I am recording my voice with other programs such as audacity. There is a voice delay too. I have windows vista and I have tried to change the settings of the sound from control panel, without any luck. Any suggestions please?

    I have an HP Presario CQ61 that I bought to record my own music in tracks and it's useless to me because I have about a second delay from the mic to my recording program and headphones. You would think that with all the brainy knowlage Bill Gates and the computer industry has someone can come up with a downloadable fix for this problem. If I knew I would have this problem before I bought the thing I wouldn't have wasted my money.  If anyone finds a fix for this please let me know.

  • Can you record sounds and save as a ringtone with the IPhone4?

    I'm new to the IPhone. All other phones I' ve used in the past I could save sounds and use them as a ringtone. I just can't seem to figure it out with the I4. Can it be done?

    You can record sounds with the Voice Memos app, then sync them to your computer by selecting "Include voice memos" on the Music tab of y0ur iTunes sync settings and syncing your phone.  Once synced to your computer they will appear in a Voice Memos playlist that iTunes creates on the left sidebar.  Then you have to convert it to a ringtone using iTunes as shown here: Create free ringtones with iTunes 10.  After this is done, you can check the ringtone in your iTunes library, then check Sync Tones on the Tones tab of your iTunes sync settings and sync.  Custom ringtones will appear in Settings>Sounds>Ringtone at the top of the list.

  • Applet that records sound

    Hi all.. I am developing an applet that records sound and stores it in a WAV file... The applet is signed and loads in the browser well but it does not give the output, i.e. the WAV file in the specified directory.
    Can you please have a look at my code and tell me where Im going wrong?
         public void init()
              b1=new Button("Record");
              add(b1);
              b1.addActionListener(this);
              b2=new Button("Stop");
              add(b2);
              b2.addActionListener(this);
         public void run()
         public void start()
              try
              audioFile = new File(filename);
              audioFormat = new AudioFormat(AudioFormat.Encoding.PCM_SIGNED,44100.0F, 16, 2, 4, 44100.0F, false);
              info = new DataLine.Info(TargetDataLine.class, audioFormat);
              targetType = AudioFileFormat.Type.WAVE;
                   targetDataLine = (TargetDataLine)AudioSystem.getLine(info);
                   targetDataLine.open(audioFormat);
              catch (LineUnavailableException e)
                   msg="Exception occured"+e;
              repaint();
         public void actionPerformed(ActionEvent ae)
              String cmd=ae.getActionCommand();
              if(cmd.equals("Record"))
                   try{
                   virtual_line           = targetDataLine;
                   virtual_audioInputStream= new AudioInputStream(virtual_line);
                   virtual_targetType     = targetType;
                   System.in.read();
                   virtual_outputFile     = audioFile;
                   virtual_line.start();
                   AudioSystem.write(virtual_audioInputStream,virtual_targetType,virtual_outputFile);
                   }catch(Exception e)
                        msg="Exception here"+e;
                   msg="Recording..";
              if(cmd.equals("Stop"))
                   virtual_line.stop();
                   virtual_line.close();
                   msg="Stopped";
              repaint();
         public void paint(Graphics g)
              g.drawString(msg,8,80);
    }

    how can i will play a .wav file in applet

  • How to use a recorded sound in voice memos as a ringtone.

    How to use a recorded sound in voice memos as a ringtone.

    You may have better luck dumping those to computer and using an application that includes the ability to scrub.
    Try the Mac App Store for choices.

  • In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

    In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
    i have been provided with this info
    You can find troubleshooting tips, how-to articles, and moderated
    > > discussion forums on our support website:
    > >
    > > www.apple.com/support
    > >
    > > iPhone: Basic troubleshooting
    > > http://support.apple.com/kb/HT1737
    > >
    I did every step in the link that i have been provided with (thank you), but I’m
    still experiencing the same issue. My experience with Apple has been
    excellent and this has been the first time I have experienced something
    like this with an Apple product. I hope we can find a quick solution.
    In order to get the iPhone 5 as soon as it launched (being a major fan of
    Apple products!), I purchased my iPhone 5 from the UK through a friend of
    mine who lives there.
    My question is: can I have the faulty device replaced within Saudi by one
    of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
    avoid the disruption, complication and expense of sending it back to the
    UK.
    Could you advise whether this is possible or not, and if not how should I
    go about having the device replaced?
    Thank you in advance for your cooperation.

    Nice try! Take a hike.

Maybe you are looking for