Vocals on M-audio fasttrack panned all the way to left (only in left ear)

I record vocals using an m-audio fasttrack. When i listen back to the vocals they only play in the left ear, in other words, they are panned all the way to the left. When i turn the pan knob all the way to the right, i can't hear the vocals, and when i turn it back to the middle, it only plays in the left ear again.
anybody know the problem?

http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly

Similar Messages

When track is panned all the way to the left....

when track is panned all the way to the left there is no sound....
any help would be appriciated....
thanks

alright thanks alot This helps me quite a bit....

When i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

when i plug in my charger to my macbook and have it charged all the way i can only use it for an hour before it dies on me again. what is wrong with my macbook? what can i do to fix it?

Go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7), then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.
Also it would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report in 10.7).When System Profiler comes up check the Model Identifier.

I purchased a song a few days ago and downloaded the whole song and the song will not play all the way through it only plays 23 seconds. How do I fix this problem?

I purchased a song a few days ago and downloaded the whole song and the song will not play all the way through it only plays 23 seconds. How do I fix this problem?

Thanks for this post. It corrected my similar issue. Note that you need to exit from/re-enter iTunes after deleting the song from your Purchased list.

Extending width all the way to left and right?

If you look into the website :
http://mcec.my/
You scroll down and under the sponsor section where you see a pink background, how do you extend the background all the way across the browser screen when the page load?
Because now the left and right side is white and looks weird...
Thanks for any help in advance

The reason that the pink area does not stretch accross the page is because it is constrained by the outer container div.
Your site structure is a typical method of centering a website in the browser. Everything gets placed in a container which is give a width and a left and right margin of auto.
The way to change it is to get that section of the page out of the container. Place it under the rest of the page in it's own container and then add the pink background to that. You might then need to put the content of that section in another div and use the same technique to centre it.
You can see that with the top section of the page, the effect is achieved with a graphic. You could to the same again with a pink graphic and then try to set that in the CSS. However, this won't be easy if the content of your pages changes.
Martin

Why header does not stretch all the way from left to right?

I am using Dreamweaver CS3. I am a newbie. I modified a dreamweaver two column template.
Now I find that there is always a gap between the header and the left and right edge of the web page! I am enclosing the css stylesheet. Please tell me where I went wrong. Thank you very much.
@charset "utf-8";
body {
    font: 100% Verdana, Arial, Helvetica, sans-serif;
    background: #666666;
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #000000;
.twoColFixLtHdr #container {
    width: 90%; /* using 20px less than a full 800px width allows for browser chrome and avoids a horizontal scroll bar */
    background: #FFFFFF;
    margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
    border: 1px solid #000000;
    text-align: left; /* this overrides the text-align: center on the body element. */
.twoColFixLtHdr #header {
    background: #a4c2c2;
    padding: 0 10px 0 20px; /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
#logo {
    height: 71px;
    padding-bottom: 12px;
    width: 100%;
    background-color: #999966;
    padding-top: 12px;
#nav {
    height: 28px;
    padding-top: 12px;
    padding-bottom: 12px;
.twoColFixLtHdr #header h1 {
    margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
    padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
    font-family: Geneva, Arial, Helvetica, sans-serif;
    color: #000000;
    text-align: center;
    font-size: 36pt;
.twoColFixLtHdr #sidebar1 {
    float: left; /* since this element is floated, a width must be given */
    width: 40%; /* the actual width of this div, in standards-compliant browsers, or standards mode in Internet Explorer will include the padding and border in addition to the width */
    background: #EBEBEB;
    padding-top: 15px;
    padding-right: 10px;
    padding-bottom: 15px;
    padding-left: 20px;
    font-size: 14px;
    line-height: 21px;
.twoColFixLtHdr #mainContent {
    float: right;
    width: 42%;
    margin-top: 0px;
    margin-right: 0;
    margin-bottom: 0;
    margin-left: 0px;
    padding-top: 15px;
    padding-right: 10px;
    padding-bottom: 0;
    padding-left: 20px;
    font-size: 14px;
    line-height: 30px;
.twoColFixLtHdr #footer {
    padding: 0 10px 0 20px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
    background:#DDDDDD;
    clear: both;
.twoColFixLtHdr #footer p {
    margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
    padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
    float: right;
    margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page */
    float: left;
    margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
    clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;

.twoColFixLtHdr #header {
    background: #a4c2c2;
    padding: 0 10px 0 20px; /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
The instructions (comments) above give you a clue. Zero out the left (20px) and right (10px) padding.
.twoColFixLtHdr #header {
    background: #a4c2c2;
    padding: 0;

FarmTown in Facebook will not open all the way? Why? I can't use Firefox :(

I just downloaded Firefox for the second time. I uninstalled it the first time because it would not open Farm Town all the way. I only get the bottom part, and not the farms.
I figured I would try downloading your program again, and the same problem. I can't use Farm Town. I downloaded it the standard way, I didn't try to change anything when it was going to be downloaded....I am using Windows 7. I'd appreciate hearing from you at your earliest convenience
Sandy

You are saying Firefox opens full size, but when you what the smaller
window, you can't change it's size?
Do you have any other problems with Windows or Firefox?
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there?

Panning issues.. Left works fine, Right all the way the track silenced

I have a panning problem. I'm fairly new to Logic Studio. I started with 8 and upgraded to 9. Just recently I've noticed that if I pan left everything works fine. If I pan to the right all the way the track becomes silenced. I have recorded a lot of music and hadn't noticed this problem until now. I saw something about project panning rules. Can anyone help me out with this?

It will be nice if you can provide a download link of this song project ( with out no audio stuff ), so we can test if it is a software issue or not...
!http://img59.imageshack.us/img59/4967/aglogo45.gif! [www.audiogrocery.com|http://www.audiogrocery.com]

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

Final Cut Pro X - Share - Export Media - H.264 - Audio is panned to the left?!

My video has a soundtrack that is a stereo .WAV that I can play in QuickTime with no problem.
I added the .WAV to my FCPX project, exported H.264 of the finished video, and when I play the resulting file in QuickTime, the audio is panned to the left. There is still some stereo separation but it's like the right channel has been turned down. Alternately playing the video and the original .WAV in QuickTime makes it extremely obvious, but it's actually noticeable (and very annoying) even without the comparison.
Does this happen to anyone who exports H.264 via the Share -> Export Media menu item, or is it something in my project? (I didn't do anything to the audio apart from dragging it onto the timeline - I tried deleting the audio and dragging the file back on again but it still ends up panned to the left in the output).

It was set to Surround and 48Khz. I set it to Stereo (and 44.1Khz for good measure, as that is the sample rate of my soundtrack) and then re-exported to H.264, and now the audo is perfectly centered.
So that's perfect, thanks.
Now the only thing wrong with FCPX is how it crashes every ten minutes or so!

I have purchased two separate audio books and they just skip around and wont play all the way thru. how do i redownload them without buying them again?

I have purchased two separate audio books and they just skip around and wont play all the way thru. how do i redownload them without buying them again?

How to report an issue with Your iTunes Store purchase

TS3274 After updating to the latest version of itunes I now have no audio . The volume button is all the way up and it says "headphones". I never saw that before and can't find where to change it.

I updated to itunes 7.02 yesterday and now I have no audio. The side switch says mute or headphones. How do I listen to anything without headphones?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Mini Dvi to hdmi problem, the mini dvi doesn't even plug in all the way?

hi,
i have a mid 2007 macbook, i just bought a mini dvi to hdmi cable, i tried to plug it in and it doesn't even plug on all the way, 1/3 of the conector is still hanging out, and it doesnt display anything anyways, nothing is detected on the macbook or the TV.
somone seem to have the same exact problem as me with the laptop, but his query wasn't answered it was the last post on this thread.
https://discussions.apple.com/thread/3660057?start=0&tstart=0

Thanks for that. I have a Y adapter (3.5mm stereo headphone jack to RCA sound just like you said). Under input options on my TV, I can select either HDMI1 input (which gives me video only) or AV1/S input (which gives me audio only) - not both at once...Could you explain how I can get stereo audio on my TV?

Having a problem with mini dvi to hdmi. Can see the background, but must move all screens all the way to the right to see on tv. Any solutions?

I'm having an issue with setting up mini dvi to hdmi. I can connect and see the background picture from my macbook (approx 4 years old) but in order to see any screens or video, I have to move the screen almost all the way off the macbook display to the right. Any ideas why this would happen? Also, there is no audio, although when I bought the adapter and cable at the Mac store, they assured me it would handle both.

You have the display set in Extended Desktop mode. In System Preferences>Displays on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will makethe second monitor your main screen. You can now use your MacBook in ClamshellMode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
No Mini-DVI adapter can carry audio. The only MacBook that sends audio is the Mid 2010 model 7,1 through a Mini DisplayPort.
If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

QT doesn't open all the way...can't see the video

I get a the thing to open but not all the way as a video would with at least the opening frame. I get just a narrow box that look like an audio file.

Videolan client - one of the single-most used video playback programs there is. It is open-source, goes on ANY Operating System, is free and is constantly being worked on and updated.
VLC is my fall-back to play really old and unusual file formats with. I have a few ancient videos - .mpg movies I made on my Sony Cyber-Shot camera that won't play in anything else.
If VLC cannot play a file, and it is not a proprietary format locked to a specific player (like a RealMedia file or Apple's .mov file container) it means the file is corrupt.
It's really a nifty program and it offers lots of options

Vocals on M-audio fasttrack panned all the way to left (only in left ear)

Similar Messages

Maybe you are looking for