Vocals won't play, backing track will - HELP!

My iPod mini plays perfectly well through the computer but when I try to listen thro earphones I can only hear the backing track and backing vocals (like a karaoke version!). This is not an earphone issue as I have tried different earphones. Can anyone help?

good news indeed!
keep an eye on it though. i'm no expert on the issue, but it can be caused by a dodgy jack connection. (i've seen a case of PC speakers being hit by it too.) so if it happens again, the repair option might be worth investigating.
love, b

Similar Messages

MIDI regions won't play back in Logic X

Suddenly my MIDI regions won't play back. I can hear the notes when when I play on my MIDI controller and when I mark the MIDI notes in the piano roll, but not when play it back in the arrange window. This worked fine the last time I opened the project.
- I have done a restart of all my equipment, computer and Logic.
- Nothing is muted - not the track or the regions.
- The MIDI in/out in the piano roll is ON.
- The channel strip setting is set to ON.
- This applies to all instruments.
- It works as usual for MIDI written using the pen tool, but not for MIDI played on the keyboard.
- MIDI channel are set to 1 (as seen in the event window).
- Instrument channel is set to "all".
Logic X 10.0.2
OSX 10.8.4
iMac early 2009
2.66 GHz Intel Core Duo
4 GB ram
SATA disc
M-Audio Fast Track Pro, with M-Audio Radium 49.
Does anyone know what could be wrong? Any help is appreciated.
Thanks!

See if this is the problem.
Is this an imported Logic 9 project file?
Check the track Inspector settings and see if you have any over the top values for some of the settings (like Delay)

PPro CS4 won't play back

Suddenly video in Premiere Pro CS 4.0.0 for Mac won't play back from source window, program window, or timeline, except for an occasional playback of < 1 second. Scarily this was described by a bunch of users in a thread started two years ago. Only one solution was offered there, which didn't apply to my Mac.
I was involved in another thread on a related subject in this forum once before but that setup seemed connected to the use of a Dazzle Bridge for capturing. There's no such complication now...it's just not playing any video more than a few frames.
An editor who can't playback any video is in trouble, and after paying as much as I did for this program and a Mac Pro, it is disheartening. Any ideas out there?

I appreciate everyone's help but I'm afraid the situation has gone from bad to worse, since Premiere suddenly disappeared.
Yesterday, following one bit of forum advice, I tried using a separate user account labeled Premiere Pro and the program did play the files--though it wouldn't let me save the project file where it resided. Now, however, the program is nowhere to be found. I have the original installation disk but I have heard of problems arising from reinstallations.
To answer some other questions, I did try to download the latest update for PPro CS4. I am using PPro for Mac on a Mac Pro with a 10.5.8 OS. I can't say for certain exactly which version I "have" of PPro CS 4 since the update because the program has disappeared and is not turning up in the Finder anywhere, nor can I recall the exact wording of the error message saying I couldn't save my project as edited under the alternate user. The program and system worked fairly problem free for almost four years before the last few days. I use a variety of source footage, including .avi, .mov, .flv, .mp3, .wav.
One Snow Leopard user has recommended using a Root User account which doesn't seem to apply here. For example, he referred to a "Network Account User" option that was supposed to appear in Accounts/Login Options but doesn't on my Leopard. Also, as per another user at Trafford College, I revised permissions to select Everyone...however since the program isn't appearing on my computer, there's no telling if that worked.
Community help is greatly appreciated--especially in light of one forum report of someone who was on the phone with Adobe for hours with this kind of problem but without getting it solved.

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

HT2375 Hi I can't play back track from the middle of a software track

Hi I can't play back track from the middle of a software track, and hear what I have played.

MarsDaretoDream wrote:
Hi I can't play back track from the middle of a software track, and hear what I have played.
For this you need to look at chase functions. Project settings>Midi>Chase button

HDV4 in a .mov file won't play back using any software

Issue:
I had 4 DVDs sent to me containing a bunch of .mov files that won't play back in any of the following apps:
QuickTime 7 Pro (includes Mpeg2 codec from Apple's Web site) - sends me to Apple.com's QT plugins page
Mpeg Streamclip - loads only some on batch import, but mostly displays white and plays the audio
HandBrake - Says not a valid source
VLC Player - error says that HDV4 files cannot be played
QuickTime Player - says format isn't a format that QT recognizes
I need to get this into a format usable by FCE. I'm running the most up-to-date 10.6 Snow Leopard, and the last version of FCE. How can I do this without losing my current version of iTunes or Final Cut Express?
Vent:
As videographers gradually move to hard-drive based cameras, their ability to submit their footage becomes more and more difficult. As a result, we get DVDs, flash drives, 64 GB memory sticks, and more. It seems like each one uses a different file format, and every format is proprietary. Where is a standards committee when you need one? Where is the open-source format?

from: http://xkcd.com/927/
In the words of my favorite engineer: "Standards are wonderful ... and there's so many to chose from"
-DH

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

Logic Pro 8 mutes newly recorded tracks and won't play back until reload...

Seems like this has happened within the last couple of months. When I record audio in Logic and try to play it back, it won't play the audio. The arrange window shows it is there and the regions do NOT show that they are muted (nor does the channel strip). In essence, it acts as if it is muted, but there are no signs that it is. (I even select the regions and mute then unmute them, and mute and unmute the channel strip, but nothing changes. Still no audio.)
So I have to close the project and reopen it. When I reopen it, every region in the previous recording session (audio) is greyed out (muted) in the arrange window. Once I select them and unmute them, they play back perfectly.
This is a very weird situation. Anybody have any ideas about what the issue is?
Thank you!

A lot of people have reported this, and it happens to me pretty frequently. Gotta be a known bug, but of course since Apple is always mum about this stuff with absolutely no communication to its customers, we won't know until the next version of Logic is released.

IPod won't play album tracks consecutively, only one at a time

So I was trying to listen to some Brian Eno last night.
How do I tell my iPod that Brian Eno soundtracks are, um, soundtracks - as in, intended to be played piece after piece, one through thirteen? For example, if I go into eg a Kasabian album, I can play the whole thing without having to re-find the album for each individual track, + the tracklisting in the 'Now Playing' window on the iPod shows '1 of 13', '2 of 13', etc.
But if I try to play Eno's The Pearl, the 'Now Playing' display tells me each track is '1 of 1' - so it will only play one track + I have to go back into the iPod + manually select track 2, track 3, etc (which are all still '1 of 1'). And here's the weird part, if I look at the same tracks in the 'Get Info' window on iTunes on my laptop, each track is clearly labelled '1 of 13', '2 of 13', etc. Whassup with that then? It seems as if that info simply isn't making it as far as the iPod.
I tried designating the album as a compilation, but this just made Eno vanish from the Artists menu + didn't solve the problem.
Double weirdly, this seems to be a problem I have only with Brian Eno - is he on some sort of Apple blacklist??!
For the moment I've got a workaround, in that I've made Eno into a playlist - but surely there's got to be a correct solution?
Any help gratefully received. Thanks.
Fi

Did you ever get a sensible answer to this problem, I have a similiar problem on my Mac. I have one track from iTunes Store, which refuses to play on my iPod......have downloaded stack of music before, this has never happened previously!
iMac 20" Intel Core 2 Duo, 250 gig HD, 1 gig Ram Mac OS X (10.4.8) Seagate 320 gig & LaCie 80 gig EHD's. Using Boot Camp with Vista Premium

Video won't play but audio will.

Whenever I try to playback my video, the playhead will move but it will stay in the frame I started from and won't play the video, but the audio will play. I;ve tryed rendering everything, restarting my computer, and cleaning the cache but none of that will work. I tried exporting the video and it played fine but it still would do the same thing when I went back to editing. Does anyone have any idea on how to fix this? Does it have anything to do with me only having 4gb of ram?

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Installed iMovie 7.1 projects won't play/event clips will play-no volume

I just installed the iMovie 7.1 (506) update, and now I can't use the software at all.
1. My PROJECTS will not play at all. I can click on a clip and expand it (like I'm going to trim it), and play it from there... but I get no volume.
2. In the EVENTS window my clips will play, but I get no volume.
3. Even the iTunes music I put in the background on my projects won't play, so the sound issue is obviously not related to the clips.
Before I installed this new update, everything was working fine!
I've had nothing but problems since I bought iLife08 and installed iMovie. It's just not working. The previous update fixed all my problems (from the software out of the box), but I had to re-enter all the clips into new projects. Now this new update I did tonight has set me back again. This is costing me time. I've been trying to edit my trip to Europe... and this software is just not working.
HELP!!!!
Apple if you are reading these posts... your new update has problems! PLEASE FIX IT ASAP!
Also can you put a bug report on this software so I can let the developers know there is a problem.

Did you also install the iLife Support 8.1 upgrade? That upgrade is required, according to the iMovie 7.1 upgrade page.
http://www.apple.com/support/downloads/ilifesupport81.html
Where it says this about iLife Support 8.1:
What’s New in this Version
This update supports system software components shared by all iLife ’08 applications, improves overall stability, addresses a number of other minor issues, and supports general compatibility issues. It is recommended for all users of iLife ’08.
Karl

Purchased music won't play on ipod! Help!

Hi,
I've posted this before, but not found a good response that solves the problem. Thought I'd try again - any help would be appreciated.
My original ipod died just b/4 the warranty expired, so I got a new one from the apple store. Now, my ipod will not always play music I've purchased from the itunes store. There are two "fixes" I've found for this. The first is to plug my ipod into my computer and let it update. This seems to restore the files (?) but only works for a day or two, then the ipod skips right over the purchased files. The song file info (artist, song title, album, etc...) pops up on the screen for a second or two, but then goes right to the next file.
A better fix was to drag the "itunes music" folder from the finder into the library view of itunes on my desktop. This seemed to be a better "update" and worked for several months, but I recently noticed that once again, my ipod is simply skipping over any purchased music.
As you can imagine, this is quite frustrating, and also, since I've purchased a fair amount of music from itunes that I can't reliably listen to, very expensive!
I've noticed that in my "itunes music" folder in the finder of my computer any purchased music has the file extension ".m4p" whereas any music that I have ripped from a CD that I already owned has the file extension ".m4a". Is it possible that this has something to do with it?
My guess is that because I'm on my second ipod, the songs are protected somehow so that they "lock" after a certain amount of time if the file doesn't recognize the ipod device? Does this make sense? Does apple protect these files so that you can't permanently share them with other peoples' ipods? That would seem to be a fair thing, but I can't listen to them on my own ipod! I've been to the local apple store several times, and they have no idea what's going on.
I have a mac G4, and a 5th gen ipod (20G). All the software updates are current.
Again, any help would be appreciated.

"oh, and i also downloaded the free song of the week to see if downloading something new would help it out. nope."
Into a new user account with a separate iTunes library? That's the idea.
1. Deauthorize the computer.
2. Create a new user in the system.
3. Download the free song of the week from the iTMS in the new user account.
4. Play the song in that user account to authorize again.
5. Restore the iPod (using the iPod updater) in the new user account.
6. Sync just the free song of the week and see if it plays on the iPod.
If it does, you appear to have a corrupted iTunes library file, and you should recreate the iTunes library file in your normal user account, and then sync your music back to the iPod and all should be well.
The following articles will help you.
Authorization and Deauthorization.
How to create a new user account in Windows.
How to restore the iPod.
How to recreate your iTunes library.

IPhone 5s shut itself off shortly after unplugging charger. Won't turn back on. Help!

I charged it for 15 mins, unplugged it, set an alarm, and 5-7 minutes later the screen was black and won't turn back on. The case/phone is still hot, and it still won't turn on after 2 hours. It hasn't cooled at all either, and my AC is blaring in this house.
When can I expect it to turn back on? That is, if it's even off at all.... Is there a reset button-pattern I can push to expedite the process? Is there anything I can do?
Should I just make an appointment for the Genius Bar? Help!

Hi MeMDz97,
If you are having issues with your iPhone powering off unexpectedly you may want to follow the steps in this article for troubleshooting -
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
In particular this section -
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L

Subtitles won't play back off disk image or DVD player.

Hello,
I am running into problems seeing the sole subtitle track that I have thru a TV DVD Player or a burned disk image. All is fine in DVD SP's Simulator. So the bottom line is that I am doing something wrong, heh?
My set-up is very straight forward: one main menu page, from which I have a "Subtitle Yes No" set of buttons to respectively enable/disable the subtitle track. The "Yes"/"No" buttons enable/disable the subtitle track by checking/unchecking the "View" box of the Button Inspector as described in the first part of this article: http://www.kenstone.net/fcphomepage/dvd_sp2subtitles.html
Furthermore, other menu pages are accessed, playing back media from a single track with numerous chapters in it, and stories made out of that track. I was hoping I could refrain from needing to duplicate all stories, e.g. One set of stories with the subtitling track enabled, the other set disabled, but it seems like this is the way to go to make it work.
Is there another approach to this? I am rather new to DVD SP and am not familiar with Scripts - would a script help this out?
Thanks in advance for any help you could provide...
Cheers,
Alain
MacBook Pro 2.16GHz Intel Core Duo Mac OS X (10.4.8) 2 GB Memory

OK so I've answered my own question, thought I'd post it here if ever this can help someone else...
Duplicating menus and stories toggling on/off the "View" checkbox of my subtitle stream did not work, which is a good thing in a way because it was an ugly scene to work with.
I guess I was impressed by the "Script" term and refrained from using it, but it turns out to be very easy and simple to use... On my "Subtitle - Yes" button, I targetted a 2-liner script that enables "SPRM 2" (the "Subpicture Stream") with the "On" value of 64 for Stream 1. On my Subtitle - No button, I targetted another 2-liner script that disables "SPRM 2" by assigning it a value of 0.
I find the DVDSP documentation on scripting a little lame though, I guess I would have liked some more examples to help the scripting "science" sink in...
Cheers,
Alain

Audio won't play back after recording.

After recording with my BEHRINGER 1204FX though USB, I can see the audio in its track but it won't play the audio until I unplug my 1204 FX and set my input as built in or something else.
Why can't I listen to my recordings whithout doing this?

You need to create an aggregate device.
This link should help:
http://discussions.apple.com/thread.jspa?messageID=8813763&#8813763

Vocals won't play, backing track will - HELP!

Similar Messages

Maybe you are looking for