Voice activated commands

turn off voice activated commands for visually impaired how?

Hi newonoj,
If you are having issue turning off the Accessibility features on your iPhone, you may find the following article helpful:
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Regards,
- Brenden

Similar Messages

Using voice activation commands for Illustrator

I was searching this forum to see if you can scroll (zoom) with the mouse wheel. I found a couple of short cuts that accomplishes the task (but not as easy as PS CS3 does).
In PS CS3, I created a whole bunch of Dragon Naturally Speaking commands which, in effect, allowed me to speak the various PS commands (as opposed to clicking, dragging etc) with eh mouse and Wacom Pen.
WITHOUT A DOUBT, this is the way to fly in PS. Speaking commands and having the program perform the function allows you to concentrate on the creation as opposed to what tool and when etc.
Just being able (using the scrolling wheel example), to say "zoom" or "zoom out" instead of looking for the zoom icon clicking it and then clicking the work area helps tremendously.
So, while looking for a way to Scroll in Illustrator, I got to thinking I will do the same thing for this application.
Therefore, I was wondering if anyone had done the same thing here in Illustrator.
I also posted this in the Windows forum.
Anyway, just wondering.
Bob

Hi Jean,
first, I had to let you know, and I am by no means connected in any form shape or manner with Dragon Naturally Speaking software.
Second, I am actually dictating this message to you utilizing this voice activation software. I have been utilizing the Dragon for many years and this particular version happens to be one of the best that they have ever marketed.
To give you an idea of the different commands that I utilized when creating very simple voice commands in the Dragon, here are some of the commands I created:
Adjust color, adjust contrast, adjust curves, adjust hue saturation, adjust levels, auto color, (for the brushes if I wanted to increase them, bigger 1 bigger 2, bigger 5, bigger 7 (as you can see, it would increase the size of the brush dependent upon the number that followed the word bigger)), clone, copy, copy layer, crop, curves, cut, delete layer, deselect, duplicate layer, feather, erasure, eyedropper, etc., etc., etc)
Once again, I am dictating this message and not typing it.
Hopefully you can see we have a mouse in your hand, or a pen tablet and you are looking at the screen and reciting commands, and not having to look at the keyboard or the mouse or the walkom pen or what ever, and when you speak a command the application does exactly what you want, this allows you to concentrate on what you are trying to create as opposed to how to create it!
This is the major differentiator between working manually (and trust me the pros on this forum can work very very fast manually), and working allowing your creativity to come to the front as opposed to your technical specific knowledge of the application and how to maneuver it.
Anyway, I come out of many many years of information technology and this is probably one of the best combinations of applications that increases the efficiency of the individual working with said applications.
I probably should go back and correct any recognition errors that the Dragon might have made (which were probably made because of my poor pronunciation were slurring of words), but I would rather not.
It would be better for you to see (and I guess the other members of the form to see) the voice activation software can do for you.
In closing, and once again I have to stress I am in no way affiliated with the Dragon, combining these two applications increases your productivity tenfold.
Good luck, and I hope you shoulder feels better.
Bob
ps., ok so i lied, I corrected 5 small errors the Dragon made.... but you would have understood what I was trying to say anyway....

6233 voice activated dialling feature. TERRIBLE!!!

For the last 30 mins I have been trying to find a way of recording my own voice tags for voice activated-calling on my 6233. What a waste of time. I think it is ridiculous that Nokia has not included this feature and according to the previous posts they are not going to put it into an firmware updates. I still have my Nokia 6230i which I think I will start using again. There are things I like about the 6233 but there are to many glitches, also the font for the time whilst in stand-by mode not only looks terrible but is hard to read. What are the people at Nokia thinking? They have put a load of junk on to the 6233 and not put the useful stuff that was on the 6230i on it. I've used Nokias for 8 years and I am now seriously considering getting a Sony Ericsson next time I can get an upgrade. WISE UP NOKIA!!

03-Mar-2007
11:45 AM
kludgefactor wrote:
The new voice recognition that appears in almost all of Nokia's latest products does have built-in training, called adaptation, which means over time and with use the accuracy should increase.
The trouble with speaker independent voice recognition is that for some people, the accuracy is good enough from the outset, but for others it is not. This is why adaptation is included in the Nokia version to help improve the accuracy - but it is hidden from the menus.
You can test this adaptation by using the voice dialler and if it gets the name or command correct, select that name or command. This tells the voice recognition to adapt to your voice. If you don't select, then it won't adapt.
If this is repeated for several names or commands, then the accuracy should start to improve.
Another problem is that sometimes people have strange names in the phonebook that can sometimes spoof the voice recognition - it is worth listening to any strange phonebook names using the "playback voice tag" just to make sure.
Kludge
that's alot to do especially when you don't have lots of time on your hands. its kind of ridiculous IMO. if it wasn't like that then names wouldn't make a difference whether its french or spanish or transfered from your sim, that's the names that confuses the voice dialler and causes it to come back empty, with the wrong name or a list of names. a headache while driving.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

Making a call with voice activation

I have been using a Palm for 5 or 6 years that has allowed me to make calls by either naming the individual (voice command) or saying the numbers. It is invaluable (and much safer) while driving. Does either the iPhone or any Third Party software support this capability?

Hello,
We can't even have the phone in our hands while driving in Québec. I currently have a Blackberry pearl and wanted to switch to the Iphone but without voice activation calls I won't... I only have to push on the main button on my bluetooth headset and tell my contact to have the call placed. Does this apps allow for some "automation" like when I get in the car I activate it and then I don't need to push any buttons on the phone ?
Thanks

Nokia 7100 Voice activation

I have just bought the Nokia 7100 Supernova - I wanted to stay with Nokia because of the voice activation and having a hands free kit in the car. Firstly I can't figure out how to set up voice activation & secondly, although I have twinned the phone with my active device in the car & they look connected, when I try & make or receive a call nothing happens - usually the radio cuts out & the voice comes through the speakers & this isn't happening - help!!!!!

1. In the standby mode, press and hold the right selection key or the volume down key.
A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of the first match
on the list. If it is not the correct command, scroll to another entry.

HT1430 my brother pressed the voice activation and now i dont know how to turn it off.... any advice?

my brother pressed the voice activation and now i dont know how to turn it off... any advice?

Do you mean Voice Control, which lets you speak commands, or VoiceOver, in which a voice speaks items on the screen?
For Voice Control, just press the home button to exit.
For VoiceOver:
Turning VoiceOver On or Off

Voice Activated Software

I am currently exploring the potential of allowing a user to access SAP and process various transactions through Voice Activated Software.
Has anyone had any experience of this or know of any solutions that are proven to integrate with SAP?

Does MacListen take over general control of the computer? I mean does it do commands such as "Switch to Firefox" and will it run application-specific applescripts?
How does MacListen compare with say Dragon Naturally Speaking, traditionally best in the field?
Is McListen any more reliable than the speech recognition software bundled with apple? Can it be trained so that when, for the tenth time I say "switch to firefox" and for the tenth time it switches to x-code, I can press a button saying "no you got it wrong", and when at last it gets it rigfht I can reward it by pressing an equivalent button?

Voice Activated Calling

I purchased a Treo 700 WX today and I'm trying to activate the voice activated calling. Is this model equipped with the appropriate software for this action or do I need to download/purchase it?
Post relates to: Treo 750 (AT&T)

Hi.. Welcome to the Palm forums. Voice command is part of windows mobile, to set it up follow this link. You may have to copy it into your browser but it will explain the process. http://forums.palm.com/palm/board/message?board.id=software&thread.id=7279 . Hope that helps..
Post relates to: Centro (Sprint)

Voice activated music selections

I purchased the Ipod Touch 4th generation. Howcome I do not have the 'voice activated' icon available?

have you pressed and held the Home button? From the Users Guide:
Use Voice Control: Press and hold the Home button until the Voice Control screen
appears and you hear a beep. Then use the commands described below to play songs.

How do I unlock voice activation on iphone

How do I unlock voice activation on iPhone 4

Hi Kilted Tim, thank you for your quick response.
Yup, I've had the unlimited plan for about 4-5 years, and I do everything I can to keep from losing it, for obvious reasons.
As you advise, I've been using the iphone in airplane mode with wifi activated which works fine when I am in wifi range. But of course when I'm out and about I want to use my data roaming for internet, maps, skype, whatever so I take it out of airplane mode.
The trouble is that I get incoming calls and am charged international rates even when I dont answer. I havent looked lately but I think AT&T charges me for one minute even for unanswered incoming calls.
Any ideas?
Many thanks!

HT1438 i keep getting SIM locked message on my iphone 4s and I need to unlock it please please can someone help me? The voice activation is on and when I type in what I think is the code It wont even put in the numbers

I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?

If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier). Is this your situation?
Otherwise I'm not sure what you mean by "trying to unlock my SIM". In which country did you buy the iphone? Who's your carrier?

How to turn off voice over command in mac book pro 10.6.8

how to turn off voice over command in mac book pro 10.6.8

Open Universal Access preferences and disable it there.

Voice activation button

Is there a way to disable the voice activation button ( middle button ) on the side of the device.
This button is easily depressed accidentally.
Bobexit0
Solved!
Go to Solution.

Try turning the mute button to off where you see 'open with the mute key' under ' settings/voice control '

Can Quicktime be set to record on Voice activation?

Can Quicktime or Quicktime Pro be set up to be Voice Activated, and stay on during a sleep mode to moniter suroundings? Is there any other Programs that would serve the purpose??
bobt

I tried this setup, Jeff... gets me to the login page fine... but doesn't seem to recognize any of my email logins (all which are virtual).
I have a website setup as MAIL.MYDOMAIN.COM... port 80...performance cache OFF... and pointing to /usr/share/squirrelmail. I tried these settings with OPTIONS-->WebMail both checked and unchecked. Doesn't seem to make any difference.
So, does the problem have to do with the fact that I have Mailstore partitions setup by domain, as per Alex's guide to Making Virtual Users?
As Alex mentioned, turn off the performance cache.
You can change the port in ServerAdmin to something
else (you mentioned 8010, which is fine).
You may need to create a seperate Site for Webmail if
you don't have one already.
To take this a step further....
My preferred (non-SSL) setup is this:
- Assuming you already have DNS of mail.domain.com
- Create a site for mail.domain.com (port 80)
- In Sites/General, port 80
- In Sites/General Web Folder
"/usr/share/squirrelmail"
- In Sites/Options, turn off Perf Cache.
If you do the above, when you hit
http://mail.domain.com
You will go straight to Squirrelmail without having
to add a /webmail to your url and without having to
use a different port #.
Jeff

HT204389 IPad is in "voice activation mode" and it will not open. I did not change any settings.

IPad Air -32 suddenly is working in "voice activation" mode. The ipad is locked and I cannot figure out how to unlock it. Using OS7.1-Any thoughts?

Try triple clicking the home button.

Voice activated commands

Similar Messages

Maybe you are looking for