Voice activated music selections

I purchased the Ipod Touch 4th generation. Howcome I do not have the 'voice activated' icon available?

have you pressed and held the Home button? From the Users Guide:
Use Voice Control: Press and hold the Home button until the Voice Control screen
appears and you hear a beep. Then use the commands described below to play songs.

Similar Messages

I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected.

I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected. As well Ive deselected all the music in itunes so when I sync there will be none on my phone but itunes also ignores this request and puts purchased music back on. I do not have autofill selected. Also wondering where the backup of my iphone 4s is located on my hard disk. Any help greatly appreciated.

Sorry thats itunes 11.5

6233 voice activated dialling feature. TERRIBLE!!!

For the last 30 mins I have been trying to find a way of recording my own voice tags for voice activated-calling on my 6233. What a waste of time. I think it is ridiculous that Nokia has not included this feature and according to the previous posts they are not going to put it into an firmware updates. I still have my Nokia 6230i which I think I will start using again. There are things I like about the 6233 but there are to many glitches, also the font for the time whilst in stand-by mode not only looks terrible but is hard to read. What are the people at Nokia thinking? They have put a load of junk on to the 6233 and not put the useful stuff that was on the 6230i on it. I've used Nokias for 8 years and I am now seriously considering getting a Sony Ericsson next time I can get an upgrade. WISE UP NOKIA!!

03-Mar-2007
11:45 AM
kludgefactor wrote:
The new voice recognition that appears in almost all of Nokia's latest products does have built-in training, called adaptation, which means over time and with use the accuracy should increase.
The trouble with speaker independent voice recognition is that for some people, the accuracy is good enough from the outset, but for others it is not. This is why adaptation is included in the Nokia version to help improve the accuracy - but it is hidden from the menus.
You can test this adaptation by using the voice dialler and if it gets the name or command correct, select that name or command. This tells the voice recognition to adapt to your voice. If you don't select, then it won't adapt.
If this is repeated for several names or commands, then the accuracy should start to improve.
Another problem is that sometimes people have strange names in the phonebook that can sometimes spoof the voice recognition - it is worth listening to any strange phonebook names using the "playback voice tag" just to make sure.
Kludge
that's alot to do especially when you don't have lots of time on your hands. its kind of ridiculous IMO. if it wasn't like that then names wouldn't make a difference whether its french or spanish or transfered from your sim, that's the names that confuses the voice dialler and causes it to come back empty, with the wrong name or a list of names. a headache while driving.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

6233 Voice activated calls

Hi,
The voice activated function on the 6233 works quite well and recognises most of the names in my phone book. The system behaves inconsistently when a contact has more than one number linked to them.
For contacts with only one telephone number, the system dials their number within a second of me selecting their name entry.
However, for contacts with two or more numbers such as Mobile and Work, I choose the number to dial (after selecting the right contact) and have to wait for 6 seconds for the system to display the "calling...." screen. Is there a short cut? Why is there such a long delay for contacts with multiple phone entries?
I have version 4.91 of the software.
Thanks
David

Actually, the 6233 DOES have voice recognition. The phone will recognise the name you say and find the contact for you without you having to record voice tags. Just press and hold down "Names" and speak after the beep.

Voice Activation

After turning on voice activation, I am now unable to slide to unlock screen or enter passcode. Can anyone help??? Thank you...

click on the slide to unlock and double click on it open. to select something you have to click on it and to open you have to double click it.
hope this helps
to scroll you have to swipe with three fingers

Nokia 7100 Voice activation

I have just bought the Nokia 7100 Supernova - I wanted to stay with Nokia because of the voice activation and having a hands free kit in the car. Firstly I can't figure out how to set up voice activation & secondly, although I have twinned the phone with my active device in the car & they look connected, when I try & make or receive a call nothing happens - usually the radio cuts out & the voice comes through the speakers & this isn't happening - help!!!!!

1. In the standby mode, press and hold the right selection key or the volume down key.
A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of the first match
on the list. If it is not the correct command, scroll to another entry.

Voice Activated Dailing

Will an iPhone based Voice Activated Dialing be available soon? The AT&T system is clunky and difficult to deal with. Voice Activated Dialing is they only application that I miss from my Motorola Razor. The iPhone is very visual and difficult to use while driving without Voice Activaed Dialing.
IMAC Mac OS X (10.4.9)
IMAC Mac OS X (10.4.9)
IMAC Mac OS X (10.4.9)
IMAC Mac OS X (10.4.9)
IMAC Mac OS X (10.4.9)

If you absolutely need Voice Dialing don't get a different phone. The AT&T provided Voice Dialing feature requires that you do the following:
1. Remove the iPhone from your pocket or holster.
2. Press the Home button to wake up the phone.
3. Slide the Arrow to Unlock the iPhone.
4. Point to the Phone icon (more steps if you aren't already on the home view) to activate the Phone interface.
5. The next step could be several points of the finger depending on how you have configured your iPhone.
Option A. Select Favorites and select your favorite for the AT&T voice dialing feature "*8" if you previously set this up.
Option B. Point to the Keypad Icon to bring up the keypad and dial the voice dialing option by pressing "*8".
6. Speak the pre-setup voice dial name (this is done by entering or importing phone numbers and names from Outlook).
7. Hope that the Voice Dialing understood what you said.
Basically if you need this feature because you don't want to have to remove the iPhone from your pocket while driving just to dial; forget the AT&T Service it *****.
What is needed is for the iPhone to support a native ability to allow voice dialing. It should work by just going to the Keypad icon and then dialing without entering a number; if you are manually using the iPhone or you should be able to just initiate a call by pressing the Talk button a Bluetooth headset and speaking the voice dial name that you want.
The iPhone is a dangerous device to use in a moving vehicle. Voice Dialing is a must for a device that supports Bluetooth whose main benefit is the ability to use it with your vehicle.
This is just my opinion; I could be wrong. But considering that I've been in the software development business for 25 years specifically in telecommunications based products it is unlikely that I am wrong.

"Cannot play media while voice activated dialing is active"

When i downloaded the youtube app today, i wasnt able to play it, and the notification came up that it "Cannot play media while voice activated dialing is active". The same thing happened when i tried to listen to music, and when i recieve a call it only vibrates, due to the fact that voice dialing is on. However, when i try to open the voice dialing app, it wont open, not even when i press the convenience button. Ive also changed the options on the voice dialing options and disabled everything i could, but the same message comes up. Its quite annoying, and when i phoned vodafone they told me they had no information on this matter... great help! so id be glad if someone could figure this out for me. Im a bit of a technology-**bleep**, so it might be the easiest thing ever, but im clueless!
thanks

Hi, i have the same problem on my BB 9700 (v5.0.0.351). I can´t resolve this by pulling the battery! When i boot the BB by pulling the battery, everything works fine for a time, then the error comes again. When i try to play media, alerts or ringtones, the error message as obove appears. Has anyone a solution? I´ve installed on this BB the following:
AddToContact (Test)
bbCard (Test)
ColorID
Evernote 3.0.249
Fuze Meeting 3.1.917
Google Maps 3.2.1
Google Mobile App 3.4.16
IdeaMatrix
Imagining Theme
iSkoot
klicktel
leoorg
Mobile Auction Manager ebay
Mobiscope
OntheMove
Opera Mini
Paypal
Phone Activity Log
Restart Me
Rexconnect
Shozu
Sky2 Prime Theme
Snaptu
Soonr
ToDoMAtrix
Twitvid
Ubertwitter

How do I unlock voice activation on iphone

How do I unlock voice activation on iPhone 4

Hi Kilted Tim, thank you for your quick response.
Yup, I've had the unlimited plan for about 4-5 years, and I do everything I can to keep from losing it, for obvious reasons.
As you advise, I've been using the iphone in airplane mode with wifi activated which works fine when I am in wifi range. But of course when I'm out and about I want to use my data roaming for internet, maps, skype, whatever so I take it out of airplane mode.
The trouble is that I get incoming calls and am charged international rates even when I dont answer. I havent looked lately but I think AT&T charges me for one minute even for unanswered incoming calls.
Any ideas?
Many thanks!

HT1438 i keep getting SIM locked message on my iphone 4s and I need to unlock it please please can someone help me? The voice activation is on and when I type in what I think is the code It wont even put in the numbers

I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?

If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier). Is this your situation?
Otherwise I'm not sure what you mean by "trying to unlock my SIM". In which country did you buy the iphone? Who's your carrier?

"Music selected can't be found or can't be opened" ??

This is not quite like other posts I have seen on iTunes-iPhoto integration. I am using iPhoto 5.0.1 and iTunes 4.9.
I have my iPhoto and iTunes libraries on an external harddrive. Both work just fine within each application. However, when I select music from my iTunes library to be played during a slideshow, a) it can not be played for previewing purposes (in the selection mode), and b) if I do select a song or songs, when the slideshow is started I get the following error "Music selected can't be found or can't be opened".
Let me add one last bit of detail... I had this external harddrive situation before and things worked fine, but the harddrive decided to hiccup some time ago and I didn't have a backup ;-( Luckily DiskWarrior bailed me out for the most part and now I have a backup drive. That being said, I had to reconstruct my iTunes and iPhoto libraries. The former was in pretty good shape though there are a number of tunes that are still missing (and show the little warning icon in iTunes if they are). The tunes I am picking for the slide show are not among these. As for the iPhoto library, I created a new one and added all my old photos to the new library. I don't know if this situation is the cause of this or not. Any ideas?
One last thing: there is one song I can play in iPhoto, it is part of an album that is intact though none of the other songs on that album can be played or used in the slideshow. This song happens to be one that I'd tried a handful of times to test things out. All of a sudden, iPhoto works only with this one song.

Alberto,
I have Quicktime Pro also and paid for the upgrade.
You can try it without upgrading Quicktime, but I think the newer version of iPhoto is going to want the latest Quicktime. I am pretty sure iTunes is going to want it too. Compressing with the new H.264 codec is great. I am sure you will like the new features of QTPro.

My 2nd gen ipod touch will only sync some of the music selected. How do I get to synch all the music I have selected from i-mac with itunes 11

My ipod touch will only sync some of the music selected. It only wants to sync the newest music and will not sync previous music even though some of these songs were previously on the ipod touch.   I am connecting to a imac with itunes 11.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I am editing an idvd slideshow to have some of the music selections from itunes fade out at the end of each vacation segment using music reflecting the country visited. Is there a way to fast-forward the slideshow to observe the where the music ends.

I am editing an idvd slideshjow to have some of the music selections fade out at the end of each vacation segment. Is there a way I can fast-forward through the slideshow so I can see where the music is ending and adjust the time to end properly? (without repeatedly clicking the forward button on the e-remote)

Thanks very much, varjak paw. I checked half a dozen tracks on my iMac from different albums which did not copy over, plus several which did copy over. They all show the same location:
Users/Christina/Music/iTunes/iTunes Media/Music/Brandenburg Concertos etc. (one example)
What does this mean relative to the music which didn't copy? Is there another step? or somewhere else I should look?
And wow, thanks for the info about not having legal right to keep the tracks from the CDs. I am embarrassed that I didn't know. I gave most of my CDs to my sister. Before I delete all this highly prized music (400-500 tracks) -- if I get the CDs back from her and keep them at my house, can I continue to keep those tracks on my iMac? (Sister does not have iTunes or even know what an mp3 is, so it's not like she has copied or imported the CDs -- I just didn't realize I needed to retain possession.)
Or do I still need to remove all that music from my library?
Thank you again for your help.
C.

Message says my slideshow music selection can't be found or opened?

I created a Slideshow complete with music from my iTunes library and played it a number of times yesterday. Last night when I tried to run the slideshow for an event, I kept getting the message my music selection can't be found or can't be opened. The folder and all selected songs are still there and none are highlighted, but iPhoto's slideshow just won't recognize it for some reason. Some of the songs on the playlist are stored on an external harddrive as well as my main drive. Any suggestions would be appreciated.

Jim:
Welcome to the Apple Discussions. First make sure you've selected only the Playlist icon and nothing else.
If still unavailable see if you can create a new temporary slideshow and access that playlist or track. If it works there then it's something with that particular slideshow.
Can you play those songs in iTunes?

Error During Activation while activating Report Selection Texts

Hi,
I've developed a report and the Transport Request for the Report has been migrated to Quality and Production Systems. Now, I have to make some more changes where I had to create another request.
Now, while activating the Selection Texts for the Report under the New Transport Request, it gives me an error message saying "Error During Activation". Could somebody tell me the reason and resolution for this error?
Thanks and Regards,
Venkat

Hi ,
Try activating it through se80 , as it activates the complete object .
In inactive head , with your user id see all the inactive object , may be there you can find the program , or the texts . Activate and see.
Regards,
Sureshp.

Voice activated music selections

Similar Messages

Maybe you are looking for