Voice activation detection for mic?
Is there anything like voice activation detection as in where it will mute the audio input untill it goes over a certain threshold? I'm trying to use OBS but you can hear everything my mic hears. (breathing, mouth sounds, background noise) I have pulseaudio and alsa.
I'm sorry if this makes no sense.
Any help would be appreciated!
Is there anything like voice activation detection as in where it will mute the audio input untill it goes over a certain threshold? I'm trying to use OBS but you can hear everything my mic hears. (breathing, mouth sounds, background noise) I have pulseaudio and alsa.
I'm sorry if this makes no sense.
Any help would be appreciated!
Similar Messages
-
Dual-active detection for VSS via enhanced PAGP
Hello,
What is the configuration needed on an etherchannel PAGP trunk to enable dual active detection for VSS on 4500X ?
I have enabled it on my vss in global mode but I don't know which vlan to allow on the trunk towards my switch in PAGP.
Is it the native vlan that I should allow on the trunk ?
Thanks for the help
JeremyHi Jeremy,
You can allow all the vlans of specific vlans under the portchannel that connects to the access switches. Usually, best practice is to allow only the vlans you are using on that specific access switch.
Dual-active detection command is applied under the VSS domain for the specific portchannel connecting to your access switches. It is not per vlan.
Have a look
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/15.1.2/XE_340/configuration/guide/vss.html#wp1063913
HTH -
How to perform Voice Activity Detection (VAD) ?
Hi everybody,
I need an application to detect whether human voice is present on the soundcard's input or not. The audio is fed to the Mic or Line-in via a telephone
line, so the bandwidth is limited to 4Kz, without any complex audio sounds.
This is not Speech Recognition per-se' as I donot need any intelligent processing or analysis of the meaning of what is spoken.
Just, whether or not a voice activity is present would do.
I have come across implementations like Sphinx, TalkingJava (Cloud Garden) but they are complex Speech Recognizers, not mere
"Voice Activity Detectors".
So, studying the whole API of them seemingly does not make it worth the while for a fundamental level requirement like this.
If anyone has tried something similar, could you kindly advice me if this could be accomplished by some simple means ?
Something like, just firing an event when a human voice frequency is detected ?
Your help on this is highly appreciated please.
Thank you.If you want to execute an screenflow from an external application the only way I know is with WAPI.
You can check the WAPI possibilities in your installation in /weabapps/workspace/wapi/urlActionsExample.jsp
HTH -
Using voice activation commands for Illustrator
I was searching this forum to see if you can scroll (zoom) with the mouse wheel. I found a couple of short cuts that accomplishes the task (but not as easy as PS CS3 does).
In PS CS3, I created a whole bunch of Dragon Naturally Speaking commands which, in effect, allowed me to speak the various PS commands (as opposed to clicking, dragging etc) with eh mouse and Wacom Pen.
WITHOUT A DOUBT, this is the way to fly in PS. Speaking commands and having the program perform the function allows you to concentrate on the creation as opposed to what tool and when etc.
Just being able (using the scrolling wheel example), to say "zoom" or "zoom out" instead of looking for the zoom icon clicking it and then clicking the work area helps tremendously.
So, while looking for a way to Scroll in Illustrator, I got to thinking I will do the same thing for this application.
Therefore, I was wondering if anyone had done the same thing here in Illustrator.
I also posted this in the Windows forum.
Anyway, just wondering.
BobHi Jean,
first, I had to let you know, and I am by no means connected in any form shape or manner with Dragon Naturally Speaking software.
Second, I am actually dictating this message to you utilizing this voice activation software. I have been utilizing the Dragon for many years and this particular version happens to be one of the best that they have ever marketed.
To give you an idea of the different commands that I utilized when creating very simple voice commands in the Dragon, here are some of the commands I created:
Adjust color, adjust contrast, adjust curves, adjust hue saturation, adjust levels, auto color, (for the brushes if I wanted to increase them, bigger 1 bigger 2, bigger 5, bigger 7 (as you can see, it would increase the size of the brush dependent upon the number that followed the word bigger)), clone, copy, copy layer, crop, curves, cut, delete layer, deselect, duplicate layer, feather, erasure, eyedropper, etc., etc., etc)
Once again, I am dictating this message and not typing it.
Hopefully you can see we have a mouse in your hand, or a pen tablet and you are looking at the screen and reciting commands, and not having to look at the keyboard or the mouse or the walkom pen or what ever, and when you speak a command the application does exactly what you want, this allows you to concentrate on what you are trying to create as opposed to how to create it!
This is the major differentiator between working manually (and trust me the pros on this forum can work very very fast manually), and working allowing your creativity to come to the front as opposed to your technical specific knowledge of the application and how to maneuver it.
Anyway, I come out of many many years of information technology and this is probably one of the best combinations of applications that increases the efficiency of the individual working with said applications.
I probably should go back and correct any recognition errors that the Dragon might have made (which were probably made because of my poor pronunciation were slurring of words), but I would rather not.
It would be better for you to see (and I guess the other members of the form to see) the voice activation software can do for you.
In closing, and once again I have to stress I am in no way affiliated with the Dragon, combining these two applications increases your productivity tenfold.
Good luck, and I hope you shoulder feels better.
Bob
ps., ok so i lied, I corrected 5 small errors the Dragon made.... but you would have understood what I was trying to say anyway.... -
Voice activation number for Adobe required
I want to obtain a valid authorization number for Adobe speech/voice
Message was edited by: rzorniakHi David,
As you haven't mentioned the version for the application, please refer to the link below to locate your serial number:
Find your serial number quickly
In case, if it is a part of Creative cloud, there are no serial numbers associated.
Regards,
Sheena -
Free voice activation software
Does anyone know of any free voice activation software for iMac 2007 model?
Note, not that it makes a difference for this question, no 2007 iMac is PPC. They are all Intel in 2007. 2006 was when the PPC to Intel shift happened.
-
6880-X VSS dual-active detection with Enhanced PAgP
Hello,
I plan to use Enhanced PAgP for dual-active detection for a VSS consisting of 6880-X.
Has anybody tested it?
What about the 6800IA switch - does it have a similar feature that can help the active switch in the VSS to find out if the former standby has become also active?
Thanks, kind regards,
Eduard Gheorghiuhey, i ran this up in the lab, the FEX itself runs dual active detection without the need for PAGP.
see below info:
switch#show fex dual-active
FEX dual-active detection enabled: Yes
Channel Group 101 (FEX 101)
Splitbrain detection capable: Yes
switch 1 member port state:
Te1/5/2 - Interface Up. state: bound
Te1/5/3 - Interface Up. state: bound
switch 2 member port state:
Te2/5/2 - Interface Up. state: bound
Te2/5/3 - Interface Up. state: bound
Channel Group 102 (FEX 102)
Splitbrain detection capable: Yes
switch 1 member port state:
Te1/5/4 - Interface Up. state: bound
switch 2 member port state:
Te2/5/4 - Interface Up. state: bound
switch#show switch virtual dual-active summary
Pagp dual-active detection enabled: Yes
Fast-hello dual-active detection enabled: Yes
FEX dual-active detection enabled: Yes
No interfaces excluded from shutdown in recovery mode
In dual-active recovery mode: No
switch#
switch#show fex
FEX FEX FEX FEX
Number Description State Model Serial
101 FEX0101 online C6800IA-48FPD FOC1740Y33Y
102 FEX0102 online C6800IA-48FPD FOC1741S58T -
turn off voice activated commands for visually impaired how?
Hi newonoj,
If you are having issue turning off the Accessibility features on your iPhone, you may find the following article helpful:
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Regards,
- Brenden -
What app for voice-activated recording?
Does anyone know of an app that does voice-activated recording, and allows the user to set a threshold of background noise (during which not to record) such that if the sound level gets above it, then it starts recording for a while?
voice activated recording iPhone
-
Voice activated/transcription software for MacBook Pro?
Can anyone recommend any voice activated and/or transcription software for my Mac Book Pro? I have interviews to do and transcribe!!
Any help gratefully received....
Thanks
SCheck http://www.roaringapps.com/ for alternatives, and Running Windows on a Mac, and Connecting it to Mac.
Note, you posted to the 10.3 forum, which does not run on the MacBook Pro. Yosemite software is still beta, and 10.6 software on Roaringapps is not complete. Go to Apple menu -> About this Mac to verify which operating system you have. -
How do I unlock voice activation on iphone
How do I unlock voice activation on iPhone 4
Hi Kilted Tim, thank you for your quick response.
Yup, I've had the unlimited plan for about 4-5 years, and I do everything I can to keep from losing it, for obvious reasons.
As you advise, I've been using the iphone in airplane mode with wifi activated which works fine when I am in wifi range. But of course when I'm out and about I want to use my data roaming for internet, maps, skype, whatever so I take it out of airplane mode.
The trouble is that I get incoming calls and am charged international rates even when I dont answer. I havent looked lately but I think AT&T charges me for one minute even for unanswered incoming calls.
Any ideas?
Many thanks! -
I am trying to unlock my SIM from my iphone 4s, as I am getting a mesage SIM locked. How do I unlock this?Also I am typing in what I think my code is and it is not working. The voice activation wil not allow me to type in the numbers for some reason. I have turned it off and on about 7 times now. please please please can someone help me?
If you bought the iphone in the US and it is locked to a specific carrier, then you can't use a different sim (from another carrier). Is this your situation?
Otherwise I'm not sure what you mean by "trying to unlock my SIM". In which country did you buy the iphone? Who's your carrier? -
Unable to release transport - Null predecessor activity detected
Hi all,
I'm not able to release my activities for transport.
I get this error in NWDS when I rightclick my activity and choose "Release":
Null predecessor activity detected
I tried via the cms tool. This tool returns an error message:
:cms>rel -s all -u GEN_Portal
Contacting DTR to get all waiting activities in software component spe.com_INTRANET for user GEN_Portal. Please be patient.
Printing all activities in software component spe.com_INTRANET of user GEN_Portal that can be released.
First column shows the displayname, second column the objectID and third columnthe owner of the activity.
Upgrade intranet: fix detailed navigation 9440656cbf1911df847900144f7912d8 GEN_PORTAL
Intranet upgrade: detailnav faa147b9bf1b11dfce8300144f7912d8 GEN_PORTAL
Upgrade intranet: fix detailed navigation c5c709ccbf0d11df81ca00144f7912d8 GEN_PORTAL
Do you really want to release all activities in software component spe.com_INTRA
NET of user GEN_Portal? (y/n)y
Releasing following activity(s) for software component spe.com_INTRANET (First c
olumn shows the displayname, second column the objectID and third column the own
er of the activity):
Upgrade intranet: fix detailed navigation c5c709ccbf0d11df81ca00144f7912d
8 GEN_PORTAL
Upgrade intranet: fix detailed navigation 9440656cbf1911df847900144f7912d
8 GEN_PORTAL
Intranet upgrade: detailnav faa147b9bf1b11dfce8300144f7912d8 GEN_POR
TAL
Calculating predecessor activities.
Exception while reading predecessor activities. Abort release of activities.
<--Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionM
essages', ID='CalculatePredecessorException_NullPredecessorActivity', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Ca
lculatePredecessorException_NullPredecessorActivity
What can I do to solve this issue?
thanks,
JoachimHi Ervin,
We are still facing the same problem.
At the moment there is no time to investigate this problem.
In our case this track contains only 3 portal apps, so we are deploying these applications manually.
kr,
Joachim -
Can Quicktime be set to record on Voice activation?
Can Quicktime or Quicktime Pro be set up to be Voice Activated, and stay on during a sleep mode to moniter suroundings? Is there any other Programs that would serve the purpose??
bobtI tried this setup, Jeff... gets me to the login page fine... but doesn't seem to recognize any of my email logins (all which are virtual).
I have a website setup as MAIL.MYDOMAIN.COM... port 80...performance cache OFF... and pointing to /usr/share/squirrelmail. I tried these settings with OPTIONS-->WebMail both checked and unchecked. Doesn't seem to make any difference.
So, does the problem have to do with the fact that I have Mailstore partitions setup by domain, as per Alex's guide to Making Virtual Users?
As Alex mentioned, turn off the performance cache.
You can change the port in ServerAdmin to something
else (you mentioned 8010, which is fine).
You may need to create a seperate Site for Webmail if
you don't have one already.
To take this a step further....
My preferred (non-SSL) setup is this:
- Assuming you already have DNS of mail.domain.com
- Create a site for mail.domain.com (port 80)
- In Sites/General, port 80
- In Sites/General Web Folder
"/usr/share/squirrelmail"
- In Sites/Options, turn off Perf Cache.
If you do the above, when you hit
http://mail.domain.com
You will go straight to Squirrelmail without having
to add a /webmail to your url and without having to
use a different port #.
Jeff -
6233 voice activated dialling feature. TERRIBLE!!!
For the last 30 mins I have been trying to find a way of recording my own voice tags for voice activated-calling on my 6233. What a waste of time. I think it is ridiculous that Nokia has not included this feature and according to the previous posts they are not going to put it into an firmware updates. I still have my Nokia 6230i which I think I will start using again. There are things I like about the 6233 but there are to many glitches, also the font for the time whilst in stand-by mode not only looks terrible but is hard to read. What are the people at Nokia thinking? They have put a load of junk on to the 6233 and not put the useful stuff that was on the 6230i on it. I've used Nokias for 8 years and I am now seriously considering getting a Sony Ericsson next time I can get an upgrade. WISE UP NOKIA!!
03-Mar-2007
11:45 AM
kludgefactor wrote:
The new voice recognition that appears in almost all of Nokia's latest products does have built-in training, called adaptation, which means over time and with use the accuracy should increase.
The trouble with speaker independent voice recognition is that for some people, the accuracy is good enough from the outset, but for others it is not. This is why adaptation is included in the Nokia version to help improve the accuracy - but it is hidden from the menus.
You can test this adaptation by using the voice dialler and if it gets the name or command correct, select that name or command. This tells the voice recognition to adapt to your voice. If you don't select, then it won't adapt.
If this is repeated for several names or commands, then the accuracy should start to improve.
Another problem is that sometimes people have strange names in the phonebook that can sometimes spoof the voice recognition - it is worth listening to any strange phonebook names using the "playback voice tag" just to make sure.
Kludge
that's alot to do especially when you don't have lots of time on your hands. its kind of ridiculous IMO. if it wasn't like that then names wouldn't make a difference whether its french or spanish or transfered from your sim, that's the names that confuses the voice dialler and causes it to come back empty, with the wrong name or a list of names. a headache while driving.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/
Maybe you are looking for
-
Hello Everybody, I'm having a little problem with the initial view. Upon opening, my converted PDF document (Smart Draw) continues to open in Portrait instead of Landscape. Ive created the original document in landscape before I converted to PDF.
-
[JS][CS2]Find/Change loop
Hello Scripters, I need to find a specific character style in my document then process its content and replace it with the processed content. How can i make a loop so that it process all of the instances of that style? To make the picture clearer, le
-
Vendor Classification data table in ERP
Hi, With regards to Vendor Classification assignmentu2026u2026u2026.. A vendor is assigned to a Class and then assigned with a Values to characteristics of that class Now AUSP table gives me Vendors and their characteristics & characteristics values
-
DATE type returned from function does not return the time component
Hi, I'm dealing with a strange problem. I have a PL/SQL function (running on Oracle 8.1.4.7) which returns a DATE value. Like we all know the DATE datatype includes a date component and a time component. The function I used for testing is like this:
-
Parsing levels in ODI substitution API
Hi, where can I find documentation about the different levels of tags in substitution API (<%, <?, <@) ? I don't find it is very clear in the documentation I could find (ID 753818.1) Thanks, Bruno