Voice command doesn't work

I loved the fact that the Motorola Droid Razor would have voice command but it hasn't worked right since we bought them a week ago. Anytime I attempt to send a text, note to self, call...it pop's up "server problem". The voice command feature will do a google search but I have that widget on my home screen. Has anyone else had this problem?! I have went to the store and I am so sick of hearing, it must just be the local network, wait 24 hours and see what happens. IT HAS BEEN A WEEK!
Frustrated!!

Mamashep, I want to make sure you have full use of your Droid Razr. The voice command is a great feature! Are you still having this issue? Are you able to access the internet and other data applications on your phone? Are you using the voice command from the widget? If so, try removing the widget and re-add. If no change, try clearing the cache from the Voice Search by going to Settings, Applications, Manage Applications, All, Messaging, Clear data/cache.
Let me know if you need further assistance.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Similar Messages

X1 Voice Remote - Voice part doesn't work well

So I just got the X1 Voice Remote yesterday (7/30/15). Beautiful remote btw. It comes with a setup guide which I followed word for word (that's important for people to understand, I literally did the setup instructions to the letter) .... the remote works great....except the voice command part of it, you know the whole main feature of the remote -- doesn't work with much reliability. At initial setup voice commands worked perfectly for a good 20 minutes..... then it stopped working. In frustration I powered off my entire X1 cable box...waited a minute or two and powered it back on. The voice commands worked again until I went to bed. This morning before I went to work voice command worked (I only gave one command this morning). Tonight I'm trying it out again...voice command is not working again. During this whole time it should be noted -- ALL other aspects of the remote works perfectly....plus it controls my tv on/off and volume perfectly as well as that for my receiver. The only thing that seems sketchy is the voice feature.....To be honest the voice command is more a gimmick feature to me than anything...but it does annoy me that its not working. I mean the thing is BRAND NEW.

I must admit, it has been quite a while since I have tried voice command on my XR11. I tried saying channel names vs. channel numbers and it worked just fine. With most channels but not all.
However, it occured to me the mic in the XR11 could be responding to background noise including the TVs (or audio systems) own volume level.
Maybe you could pay attention to the sound levels in the background and see what happens...
Anon1573450 wrote:
It is supposed to be that smart. And I even saw it work in the store. The rep said "Watch ESPN" and it changed the channel to espn, without explicitly telling it the channel number. Comcast even has this type of feature listed for the remote. What boggles me is the it does kinda work sometimes, it just goes to the wrong channel.

6120 classic:My voice commands do not work

Please help.
Don’t know if I'm just being stupid or there is something not right with my 6120c.
My voice commands do not work.
If I press the button for a voice command, it says that there are no voice tags saved.
If I go into the voice command application (Which should create the voice tags on opening), I cant playback the voice tags, its give a 'voice system error' error message.
Is there something that is not set up properly? In the voice command settings, the synthesizer is 'on'?
Also, I don’t have voice tags on my contacts??
I read somewhere that this is a firmware problem and the phone should be taken back to nokia. Is this the case?
Somebody please help.

I formated my nokia n6120 using the code *#7370#. It deletes !everything! (settings, aplications...), but I have no voice sytem error now.

Visually handicap, needs to increase font size in logic pro, Command doesn't work

Hi,
I'm visually handicapped, and new to logic-pro. I'm having a miserable time reading the internal logic-pro fonts. Command + doesn't work, and I can't find any preferrence or settings options that affect the default font sizes, any ideas?

Unfortunately you cannot change the font size of the main fonts in Logic...
However, there are a couple of other settings you may not be aware of...
1) Under Logic Pro's preferences... go to Display
Now you can change the size of the playhead and Local Windows under the General Tab
You can increase the size of the Logic plugin windows/fonts sizes under the Mixer Tab (I have mine set to 200%)
Note: This setting does not apply to 3rd party plugins.. only Logic's own plugins...
Under the Piano Roll tab you can change the size of Bar/Beats/Division Lines...
2) Using the screen zoom command... Hold down control and scroll on your mouse... will zoom in the screen...
Note: as you are using Mountain Lion there is also a new setting under System Preferences/Accessability
Choose Zoom on the left hand side
Now choose Zoom Style/Picture in Picture and instead of a full screen zoom it provides you with a magnifying glass of sorts to just magnify the area arund your mouse pointer. I find this setting very useful....
Hope this helps...

HT1338 Safari Hide command doesn't work

Now my Safari 6.0 "Hide Safari" command doesn't work (whether clicking the command-H or going up under the Safari menu and down to the Hide Safari command.
Any suggestions anyone? I am about one more issue away from abandoning Safari altogether and just using Chrome and Firefox.

I've made a number of iWeb websites. I notice that I can't "Command +" the text larger or smaller. Is this a function of an iWeb site .. or is there something I'm missing?
What browser are you talking about? If Safari, is it the same with the other major browsers (Firefox and Opera)? Could you provide the url of an example?

Bash command doesn't work after update

I just ran pacman -Syu as normal, but some got many errors like below:
( 3/11) upgrading binutils
error: command failed to execute correctly
and every package except kernel-headers got a error message like that. and then i found most of my bash command doesn't work any more, just like ls and vim. However, some others like pwd and cd still work correctly.
Any one any ideal?
Last edited by ranjiao (2009-11-12 13:26:01)

ranjiao wrote:I removed /lib64 and make a soft link from /lib64 to /lib, as Matlab09 requires a /lib64 containing crt libs.
is this the cause?
Yes.
I've done that before and got into the same problem when updating glibc, the lesson here, don't mess with the default directory structure.

Unhide library command doesn't work

Unhide library command doesn't work in terminal

Open the Terminal application in your Utilities and paste the following at the prompt:
sudo chflags nohidden ~/Library
Press RETURN. Enter your admin password when prompted. It will not be echoed.
The "sudo" may not even be required, but if it is and you don't use it, then you'll get an error message. Just try again using the above command.

Safari 6.0 command- doesn't work

Command+ works fine but command- doesn't work. I'm running 10.7.5

Just add the following to the file com.apple.WebProcess.sb.
Please add it below the Basic system paths and above the FIXME: or System and user preferences:
;; Plugins
(subpath "/Library/Internet Plug-Ins")
(home-subpath "/Library/Internet Plug-Ins")
And it's fixed!

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

I have a few desktop icons that won't allow me to move them to trash or relocate them on desktop. A PDF, a DOCX and a PART. Not locked under get info or get info command doesn't work. Suggestions?

This any help?
http://support.apple.com/kb/HT1526

Iphone 4s visual voice mail doesn't work

I set up new iphone 4s and visual voice doesn't work
I wiped it out and restored..still no working
tried set up as new phone and still not working
companion Iphone 4s works fine

Voice mail, including visual voice mail, is a carrier feature. Contact your carrier again and escalate the call until you get hold of someone with a clue.
This is assuming you're using a Straight Talk CDMA iPhone. If you're using an unlocked iPhone with a Straight Talk GSM SIM card, that's not supported by either StraightTalk or Apple.

Bluetooth w/ voice commands is not working correctly after 2.2 update and factory default.

I have been having numerous problems with my phone and now a problem with the Bluetooth. I have a Sony Xlopd Stereo in my car with built-in Bluetooth capability. I have been able to use the phone connected to the Sony flawlessly for several weeks. On an in coming call the Caller's name and the ringer would go through the speakers in my car. When I wanted to place a call from the car I would press the Bluetooth button on my stereo, this would launch the voice command program on the Droid X and output the voice commands responses through the stereo and then dial the phone number I was trying to call. Then I updated the phone to 2.2 and still maintained all the same Bluetooth capability. However, after having other problems with the phone after the update I decided to do a Factory Rest. After the rest it seemed to clear up some of my issues; except now when I re-paired the phone to my Sony stereo I have lost a lot of functionality. For example, now when a call comes it does not announce the caller or ring through the stereo. When I try to place a call through the stereo, the voice command program is no longer launched on the phone and it will not place a call. I have to initiate the call through the phone itself and then the Bluetooth automatically picks up the call. I have tried to wipe the paring from the phone and stereo and pair again with no luck. I have also checked the volume settings and most settings on the phone. This frustrating when trying to place a call. I would not be so bad if I never had the capability, but now knowing that it was possible at one time I want it to work again.
Does anyone know if this functionality was lost after the update and my phone was still "stuck" between 2.1 and 2.2?
Or is there another problem with my device that can't be resolved?
I am open to any advice, since Verizon will not replace my phone that has signal and reception issues dropped calls, reboots randomly among other things and now this issue even though I pay $8 a month for warranty and pay my bill with four other phones.
I am really hating the Driod X with all the flaws and inconsistency..I miss my Blackberry.

ridgey115 wrote:
I was having the same problem with my X right out of the box. Using a Motorola T505 handsfree device. Turns out that it acts exactly as you describe if the screen lock security is enabled. Once I disabled that, it worked fine. It does take a few seconds for the voice prompts to activate, but other than that it works. Not sure if you use the extra screen lock security, but if you do, you may want to disable it.
Its been so long that I thought about that issue but that is correct, when the device is locked using the password or swipe feature it does restrict the voice dialed from activating from bluetooth...

Unix Command doesn't work in Tiger

Hi,
I've got labs of eMacs that I'm finally upgrading to Tiger. My image seems to work fine, but I'm running into a weird quirk with my "Send Unix" commands via ARD. We're doing NWEA testing and LOVE the unix commands because we can login to machines, turn on TestTaker, login to TestTaker, and select the correct test (math or reading) and the right version of the test.
The script below works fine on a panther eMac.
osascript
tell application "System Events"
keystroke "1" using command down
delay 3.0
keystroke ASCII character 31
delay 2.0
keystroke return
keystroke "n" using command down
end tell
On my Tiger machines, the command stops on the:
"Keystroke ASCII character 31" line (this should arrow down to next test version).
A report window comes up in ARD with this error message:
86:104: execution error: System Events got an error: 31 doesn't understand the ASCII character message. (-1708)
This used to work perfectly, but now I can't get ASCII 31 (or arrow down to work). The real killer is that other techs in my school district have eMacs running tiger with same commands that work (some have to arrow down 16 times to get to correct test version). The other commands (like command 1 and returns, command n) all work fine! Hate to have to touch 80 machines each day to select proper test version when we log in.
Any Suggestions????

Try this form of the line:
keystroke (ASCII character of 31)
That's worked for some people. Hope it works for you. If it doesn't work as given, try without the parentheses.
Regards.

Since i installed mavericks, voice command no longer works, since i installed mavericks, voice command no longer works

Since installing Mavericks, voice command no longer works

i have Fixed the problem, Had to go into dictation and speech preferences and actually shut the dictation microphone off. Once that was done I turned it back on and it automatically began to download new software for the microphone. Once that was done I re-booted my computer and it is now working beautifully.

Restart command doesn't work

I believe the following problem began when I updated to 10.4.9. I can't be absolutely sure but the timing seems about right. I've since updated to 10.4.10 in an effort to fix it, but haven't succeeded.
The problem is that when I select the Restart command in the Apple menu the computer will begin the process, all open apps will be quit, the finder will quit, my desktop will go to blue to a few seconds. Then the monitor will go blank. Then nothing after that. I DO NOT get the startup chime. The machine is still powered on, the light above the power button is still lit. If I leave the machine for any length of time the fans will start speeding up gradually until they're at full tilt. After 4 or 5 minutes it becomes obvious that nothing is going to happen, so I need to manually shutdown via the power button.
Does anyone know what logs I can post here to help in the diagnosis? This also happens if any installer application needs to perform a restart, ie Software Update.
Thanks,
Chris

Hi chris catalano-
I have had updates make my machine do some crazy stuff just as you describe. I would actually let it go for 15 or 20 minutes before declaring it a no-go.
If that doesn't work, try resetting the SMU and see if that helps: How to reset the SMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005)
Luck-
-DaddyPaycheck

Find command doesn't work

The find command F or just Find doesn't work any ideas on fixes? I tried trashing kybrd and finder prefs. This is on a G3 running 9.2
Thanks

Hi, Bookalaka -
If Sherlock, or an alias to it, is not in the Apple Menu Items folder (in System Folder), then the Find function (Command-F) will not work. If that is the case, replace that item - move either Sherlock itself, or place an alias to it, into the Apple Menu Items folder.
Note - if you use Internet Explorer, and want to be able to use the supplemental toolbar icon for Sherlock, then Sherlock itself must be placed in the Apple Menu Items folder (IE does not recognize an alias to it).
If for some reason you are missing Sherlock completely, you can replace it fairly easily. Look in the System Folder on any OS 9.1 or later Install CD; you'll find it in the Apple Menu Items folder. Just copy it to your hard drive.

Voice command doesn't work

Similar Messages

Maybe you are looking for