Voice command for Contacts doesn't work after a re...

Voice command for Contacts doesn't work after a reboot or a contacts restore.
Steps to reproduce:
1. Backup contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Back up now.
2. Edit/save a contact, press and hold the call button, speak contacts name. The voice recognition works fine.
3. Restore contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Restore.
4. Reboot phone when prompted.
5. Press and hold the call button, speak contacts name. The voice recognition does not work.
Work around:
Edit and save each contact.
Additional Information:
Social integration with contacts also does not work after a reboot. The facebook icon and "See what xxx is up to on Facebook" is not displayed. The same work around "Edit and save each contact" also applies. This occurs using the Nokia N8 and Nokia 808 Pureview.

Nancy2015 wrote:
I have my phone paired with my car, I can do everything except it does not recognize any of my contact names. If I try say a contact name, it says "not recognized" but if I say the contacts phone number, the name pops up onthe display in my car.
Has anyone had this issue, is there a setting I am missing in my phone?
Hello, 
This is not necessarily and issue with the phone. It could also be an issue with the car`s bluetooth software that is only limited to some functions like reading your contacts list, last calls, missed calls, etc. which is most likely the basic 2.0 version. 
The Z30 has the 4.0 version that has a lot more communication capability but if the car`s bluetooth its a lower version, then you will not be able to take full advantage of it unless you upgrade the bluetooth software in your car. Call your dealer and inquire about the bluetooth software upgrade in your car   

Similar Messages

  • E61 voice command for contacts not working

    I have not been able to get the voice command function on the E61 to work when trying to call contacts.
    I can get it to go to the contacts application by speaking the word "Contacts", but nothing else.
    Any idea?

    It doesn't work on my E61 either. The hit rate I have so far is Zero. Not to mentioned I have a few person call John Smith (e.g.)
    100.34.20
    29-09-2007
    RM-244
    Nokia E51 (14.1)
    2.0633.65.01
    03-10-07
    RM-227
    Nokia E61i-1

  • Why wont Siri understand anything I am saying? The voice command in texting doesn't work either... Even if I just say no it doesn't work.

    I'm using a 4s

    Having the same issue. Microphone seems to work on a phone call perfectly fine. Called multiple people to make sure it wasnt a microphone issue. Even called my phone from my google voice number, just to speak into the microphone and see how clear it was, and it was crystal clear..... what now?

  • Gnome3.6 shortcuts for "switch to next source" doesn't work after lock

    If you have two or more input sources, once you have locked the screen, when typing password for re-login, the "switch to next source" shortcuts ("Ctrl+Space" for me) doesn't work.
    I don't know whether it is a feature, or a bug? In fact I wonder if ALL THE SHORTCUTS DO NOT WORK AFTER LOCK.
    Have anyone come up with this problem? If it is a bug, have it been reported to GNOME Bugzilla?

    Hello there,
    How are you reviewing the course? What is the action associated with 'Review Course' button? Also, can please share the screenshot of Preferences>Quiz>Settings?
    Thanks.
    Vish

  • E65 - voice commands - no voice tags for contacts ...

    Is there any chance to add voice tag for a contact?
    I had voice tags for contacts, but it dissapeared.
    Now - no chance to call sbdy using voice com.
    What to do?

    I have a E72 and got the same problem.

  • [Solved] Network doesn't work after hibernate?

    Hello!  This is my first legit Linux install so excuse me if I'm a bit slow.  I installed Arch last night and everything went smoothly.  However, after I tested out hibernate on my machine, the network doesn't seem to work.  Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
    I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver.  Running "dmesg | grep e1000e" says that it is up.
    I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd.  I am using wicd so I did the following (or at least I think I am only using wicd):
    #rc.d stop network
    #rc.d stop dhcpcd
    #rc.d stop networkmanager
    Similarly, I put a ! in front of network in rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="America/New_York"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=()
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="Vicious"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
    Restarting eth0 through wicd-cli still did not work.  I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
    I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work.  Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved?  But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work.  As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
    mkinitcpio.conf:
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run first, so it may be used to
    # override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten if already added)
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect pata scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
    # COMPRESSION
    # Use this to compress the initramfs image. With kernels earlier than
    # 2.6.30, only gzip is supported, which is also the default. Newer kernels
    # support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
    # compression.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is.  Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
    fstab.conf:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
    /dev/sda1 / ext4 defaults,noatime,discard 0 1
    /dev/sda2 /home ext4 defaults,noatime,discard 0 2
    /dev/sdc1 /boot ext4 defaults 0 1
    /dev/sdc2 /var ext4 defaults 0 0
    /dev/sdc3 swap swap defaults 0 0
    /dev/sdc4 /media/data ext4 defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
    Is wicd causing these problems or did I configure something else improperly?  Would appreciate any help to get eth0 up again!
    Last edited by TheBigCow7 (2011-09-13 17:57:20)

    Ok, I think I've made some progress!  Hibernate definitely affects my network connection.  Could this be a kernel 3.0 problem?
    I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time.  e1000e seemed to be loading up ok.  I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
    Trying to use dhcpcd like the instructions here did not work.  By some chance, one attempt did work and while it did, I downloaded and installed dhclient.  After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
    Luckily though, I found that running "dhclient eth0" worked.  My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot.  Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
    Now, eth0 works after a boot.  However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before).  I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
    I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings). 
    Is this the correct/most efficient way to fix my DHCP problem?  Can I fix my "eth0 after hibernate" issue?  Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

  • Macbook air adoble flash player doesn't work after installation

    macbook air adobe flash player doesn't work after installation

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 7. Back up all data before making any changes.
    Step 1
    You might have to log out or reboot before a Flash update takes effect.
    Step 2
    In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    If you get a warning of a "blocked" or "outdated" plug-in, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch the browser.
    If the warning persists, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 5
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
    Flash Player (failing).plugin  
    You may be prompted for your login password.
    Step 6
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 7
    If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked
    Allow (or Enable) plug-ins
    Then click the button marked
    Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 8
    Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

    I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

    You can't merge Apple IDs.  You also can't cancel (delete) and existing ID, you can only choose to stop using it.
    If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance.  Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

  • IMac - Display doesn´t work after restart

    My iMac 21 Display doesn´t work after restart. If I turn it off and 1 hour later I want use it again the iMac shows the white screen with the mac logo and then the display goes off. I connected an external display to check if the iMac was ON and with the external display I can login and do everything but the iMac Display doesn´t work .
    If I turn it off and wait 3 or 4 hours  and then turn it back on the display works OK.
    This is very strange behavior I have spent hours and hours trying to fine the solution or a similar issue but nothing so I am looking help here at apple.com
    BTW When I bougth the iMac 21 there were some spots over the display so the display was replaced by the provider. The warranty has expired by now.

    To tell you the truth, I don't know if they have to repalce the LCD panel or what they do for a bad backlight. In this reality of block or assembly replacement it probably involves repalcing the panel and not the backlight component. Don't know what it would cost. You'd have to ask that of a service center.

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • My cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

    my cable doesn't work after two months I bought my iphone 6. Whether could I get a new one from apple free charge?

    It's covered under the same warranty as the phone. So long as it's not physically damaged, they should replace it for you.

  • Sirius Internet Radio doesn't work after Snow Leopard

    Sirius Internet Radio doesn't work after I installed Snow Leopard. It works on my Firefox. I emptied the cache on my Safari, but still nothing. Any solutions?

    The reason why Sirius Radio online won't work with Safari anymore is because Sirius radio online is only supported by a 32-bit browser. Snow Leopard and all its applications are 64-bit. The best solution is to use firefox. If you still insist on using safari..... Go to adobe.com reinstall adobe flash player. Install/update Flip4Mac. Go to setting for Flip4Mac and check off all the options under the browser tab. Then when you go into Sirius Radio online, you will get an error message, just click okay. Then when you click a station, a quicktime player will come up and you will be able to listen to sirius online radio.
    [email protected]

  • Executing command on startup doesn't work

    Hello,
    I'm trying to execute this script when X starts:
    xmodmap -e " keycode 118 = Delete"
    which works, when is executed manually from console. I tried to run it automaticaly after login and starting X by putting it into .zprofile, /etc/profile, /etc/profile.d/***, .xinit or to my awesome wm config (all other scripts here are executed normally - eg pulseaudio --start). But this command is never executed. I tried even variant with adding this to .Xmodmap and then add xmodmap .Xmodmap to .xinit, but without success.
    Thanks

    Kotrfa wrote:
    Here is how my .xinitrc looks like:
    #! /bin/bash
    xmodmap -e " keycode 118 = Delete"
    exec awesome
    When I manually type this command, everything works. But it doesn't work after reboot (and .xinitrc is surely executed, because awesome starts ok).
    xmodmap seems to be time sensible. Anyhow, on my WM startup file I have:
    (sleep 10; xmodmap ~/.Xmodmap; sleep 5; xmodmap ~/.Xmodmap) &
    I come to this by trial and error.
    Has said I have it on my WM startup file, but having it on .xinitrc is also OK.
    Mektub

  • IPhoto 8.1.2 doesn't work after reinstalled the OS 10.6.8?

    iPhoto 8.1.2 doesn't work after reinstalled OS 10.6.8?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • IMessage doesn't work after the installation of the update 5.1

    iMessage doesn't work after the installation of the update 5.1

    I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
    I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
    I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
    Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
    Thanks
    Jo

Maybe you are looking for