Voice commands not working since V2.3.340 update

Voice Commands has stopped working since the upgrade. When voice commands is activated, it flashes a "please wait" screen then goes back to my home screen. I tried power reset and data clear for the voice commands app. Any other suggestions?
Thanks

Recently, I also had a small issue with Voice Command on my Droid X. Although, it wasn't the same as your issue.
My issue was with the audio response of Voice Command. Voice Command could understand me but the Voice Command "voice" was muted and not available.
I eventually traced the cause to the Droix X being "paired" with a Panasonic "Blue Tooth" 6.0 Land Line telephone system.
Turning off Bluetooth on the Droid X corrected the Voice Command audio issue.
I am sure it could have also been corrected by "un-pairing".
So, my point of posting is to keep searching for the cause. It's there somewhere. Have you done the 30 second Battery Pull procedure?

Similar Messages

TS1702 Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Any suggestions

Certain apps on my iphone are not working since the IOS 6 update, all at tempts to resolve this issue have failed. Has anyone got any suggestions. Thanks

If you don't tell us what solutions you've already taken, we're probably going to waste a lot of time telling you to do things you've already done.

Voice Commands Not working

I have an N85. I recently upgraded my firmware version (well actually juts reinstalled same version) and now I cannot get Voice commands to work. When I press and hold the right key the screen flashes but does not give me the beep for voice commands. Also I cannot add a voice tag to anything, it just returns to the same screen.
This feature used to work fine. Is there something I need to do to enable it again?

You could try a hard reset, which may remove any conflicts, usually advisable after software install.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Voice commands not working on my 6131

When I try to activate my voice commands from the phone it says unlock.
From my headset it just turns the volume down.
Worked fine this morning.
Any ideas please!!!

Manas1988 wrote:
it was under the "Tap and hold for more options" section.
Pardon? ‘Download’ was hidden in the invisible context menu, you had to tap-and-hold to open the Options menu, and then you were able to download that Speech Language? We are still collecting information about this issue because, I was not yet able to reproduce your situation myself.

My I message is not working, since IOS 8.3 update.

My messages is not working properly, since IOS 8.3 update. Message are left hanging as undelivered. When I tap on "try again" nothing happens. Even messages to known contacts with I phones, appear in green and does not get delivered anyway. I have reset my i phone several times to no avail. I like my I phone 6+ as a camera. All other functions are less than impressive.

Hi iambackbaby,
In order to help resolve this issue where you are unable to send messages from your iPhone, please follow the directions in the link below.
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Program not working since 8.0.8 update

The application has not worked (connected my mac to windows 7 PC) since the 8.0.8 update. 8.0.9 has since been released and has still not fixed the problem. Any suggestions as to what is wrong? I see this is a common issue with other users.

I am having the same issue and it is becoming a problem for our users as the updated App no longer connects, I have pasted the log from my latest connection attempt below, can you please advise as the current App state needs resolving. Thanks
[2014-Aug-11 17:04:45] RDP (0): Final rdp configuration used: redirectcomports=1
server port=3389
use multimon=1
redirectdrives=1
promptcredentialonce=1
full address=SRV-WA.OLCHS.LANCS.SCH.UK
session bpp=32
prompt for credentials on client=1
redirectprinters=1
drivestoredirect=*
alternate shell=||Notebook
gatewayusagemethod=2
workspace id=SRV-WA.olchs.lancs.sch.uk
alternate full address=SRV-WA.OLCHS.LANCS.SCH.UK
allow font smoothing=1
gatewaycredentialssource=0
remoteapplicationname=Smart Notebook
use redirection server name=1
devicestoredirect=*
remoteapplicationmode=1
remoteapplicationprogram=||Notebook
redirectsmartcards=1
redirectclipboard=1
span monitors=1
gatewayprofileusagemethod=1
gatewayhostname=gateway.olchs.lancs.sch.uk
remoteapplicationcmdline=
loadbalanceinfo=tsv://MS Terminal Services Plugin.1.OLCHSApps
[2014-Aug-11 17:07:01] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Aug-11 17:07:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Aug-11 17:07:01] RDP (0): ------ END ACTIVE CONNECTION ------

My adobe flashplayer latest version will not work since firefox 7.0 update

I know there is a problem with this because I have already seen it many times on the internet. Not happy that I can no longer watch any videos since the update. I have downloaded the latest version of adobe. I can see the"flash player" under my control panel but it is not listed in my plugins under the tools/add-ons.
I also followed the procedure shown on mozilla support to download the add on manager but it did not work either. It does also state on the mozilla website that they are quite aware that this has caused a problem for many. When is this going to be corrected?
So, I finally went back to Firefox version 3.6 just so I could still see my videos.

Hello, first update Firefox to v17.0.1 (or in the next days v18) please.
Are your drivers and DirectX up to date (very important) ?
Do you have tried to disable Flash Player Protected Mode (since v11.3) ? (that could explain why it is working with Flash Player v11.2)
Do you have tried to disable Hardware Acceleration (Flash Player or/and Firefox) ?
Do you have tried to disable all other extensions and plugins in Firefox ?
Do you have tried to use the Firefox safe mode ?
Do you have tried to disable your antivirus / firewall programm ?

Why is my Siri not working since OIS 8.2 update

My siri seems to have stopped working since 8.2 update any idea's???

Hello Boberoone,
That is interesting that you are not able to get Siri to respond to you. It could be a microphone issue or maybe an internet connection issue but to start you on your way of resolving this, take a look at the article below.
Get help with Siri
https://support.apple.com/en-us/HT203548
Regards,
-Norm G.

Airport express not working since today's itunes update

Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG

CAC not working since 4.0.5 update.

I performed the following updates and have not been able to successfully use my CAC card to access DoD webmail and restricted sites since:
Java for OS X 10.6 update 1
Safari 4.0.5
I configured my MacBookPro using the CAC on Mac website http://militarycac.com/apple.htm which had worked great prior to Safari 4.0.4.
Can I revert or can someone help me?

I'm having a similar problem with my CAC card and outlook web access. Mine however, goes a little further into my own OS. First off, my webmail used to work, and now doesn't. I never used to have problems with the keychain, nor did I have to use the ID pref workaround mentioned below.
I've gotten to the point where I cannot even open keychain with my CAC card inserted without getting a beachball of death. 95% of the time it results in keychain locking up an having to be force quit. I can occasionally coax keychain to let me click on the CAC card to see the certificates, but the second I click on one, poof keychain is dead. Interestingly, if I first click on the encrypted email cert, and then highlight the other two, it won't lock up and I can copy them to one of my other keychains. I can't click on either the DOD or DOD-EMAIL certs by themselves tho. Also, if I create an identity preference, the only way to get it to work is to create one based on the encrypted cert, and then edit it and change it to one of the other two. After that the cert, typically, works fine
I'm also using Safari 4.0.5 and performed the Java update, and a subsequent update. I'm trying to pin down when it stopped working and I'm thinking it was late December or early January.
Looking back at my software update history, I installed 10.6.2 and Safari 4.0.4 in November. I recall the card worked until at least early/mid December, so thats not the issue. I installed Java for Mac OS X 10.6 Update 1 (1.0) in mid December and the 2010-001 Security Update a few days later. The next relevant update was Safari 4.0.5 in mid March, but it was long broken by then. I'm convinced that the problem was the security update as my CAC/OWA login was working just fine in early December.
I can click on my identity preferences, delete them, once in a blue moon after a fresh restart I can even right click on the CAC certificate and create a few new identity preferences.
After tooling around on militarycac.com/apple.htm I noticed a blurb about certain websites reporting an incompatibility. The instructions directed me to use the develop menu (turn the menu on in the advanced tab in safari prefs) to change the reported browser type from Safari to IE. I got https://nrows.sscno.nmci.navy.mil/nrows/ to work, by following the instructions. For sh*ts and grins, I tried webmail with safari reporting as IE and still nothing. It still won't even recognize that it should be asking for a CAC certificate.
Interestingly enough, for the NROWS page, I didn't have to create a new identity preference. I was prompted to select a certificate in safari, in the background I had keychain open and noticed that it automatically created an identity preference. In that vain, I deleted my identity pref for webmail and just tried hitting the link, hoping it would auto create one. It didn't. Interestingly, I get the same 500 internal server error when I have an identity preference for webmail as I do without one. Weird.
The following excerpt doesn't really apply in my case as I'm not using those versions of the card, but might be helpful to someone, so I'll report it here. Excerpted from militarycac.com/apple.htm: +If your new CAC (the one you were just issued) does not work, you may have received one of the new PIV II CAC's. You can tell if yours is this type by looking on the back at the top for either of these: "Gemalto TOP DL GX4 144K" or "Oberthur ID One 128 v5.5 Dual." A possible fix for you is to download the updated TOKEND from MAC OS FORGE.org download the CAC-NG (BETA v0.96)+
+INFORMATION: The Smart Card Services Project Team is pleased to provide access to theBETA for CAC Next Generation (a.k.a. CAC-NG) Tokend support for Mac OS X 10.5 "Leopard". Support for Snow Leopard is forth coming, but you can proceed to test with your Mac OS X 10.5.6+ machines with this installation.+
Surprisingly, for https://secure.bol.navy.mil/menu.aspx I simply clicked the CAC login button. I was surprised that I wasn't prompted for a CAC certificate, nor was a prefrence created in keychain, but it worked just fine. That got me clicking on some other websites I haven't been to on my laptop since the problems started and which I used to have ID prefs for. I've listed them below, these are mostly navy sites, one army, and all work fine.
https://ntmpsweb.ntmps.navy.mil/fltmps/ no preference used/created
https://npc.navy.mil/ no preference used/created
https://secure.bol.navy.mil/menu.aspx no preference used/created
https://wwwa.nko.navy.mil/portal/home?cacLogin=true preexisting preference
https://infosec.nacy.mil/ no preference used/created
https://www.us.army.mil/ no preference used/created
https://nrows.sscno.nmci.navy.mil/nrows id pref auto created
I'm just experiencing some weirdisms with keychain, and a total no-go for webmail... any thoughts? I've tried to give all the info I've found out. Here is some other misc info as per my system.
Installed/configured/misc troubleshooting:
- cookies deleted
- ID prefs deleted and recreated
- disk verify / permissions fixed
- Keychain 4.1 (37196)
- CAC card version Oberthur ID One V5.2a Dual 2050...
- SCR3310 v2.0 (driver version 2.4.1 http://www.txsystems.com/scmdrivers.php)
- DOD Root CA 2
- DOD EMAIL CA-19 (corresponds to the email cert CA-19 on my CAC card)
- CAC certs installed/copied to login (also tried them with system)
- CAC certificates recently reinstalled on the CAC card by PSD and the certs/prefs in keychain are updated
- X509 Anchors installed in keychain (tho it worked fine without as well, this seems to be optional)
Not using parallels, this is strictly in Mac OS X running safari. Permissions have all been repaired and using my root login or my standard one there is no difference. I have five other mac users who I've personally set up their cards/webmail access and all stopped working at about the same time. We're all using various versions of iBooks, MacBooks, MacBook Pros and OS versions from 10.5 thru the latest build of 10.6.3. According to https://infosec.nmci.navy.mil/PKI/appendixa.pdf the reader we're using should be fine.
Something else is going on here. Not sure what tho. Hopefully the info I've posted can help someone knowledgeable shed some light on something.
Message was edited by: wakazashi

The home button on ipad2 is not working since the iOS 6 update

I've updated to the latest IOS 6 system and now the home button is either freezing or not working. Can't get out of apps unless I reboot. Upon rebooting, it doesn't work & if I open an app, it doesn't work again.
Need a fix.

Hello ipadisbroken,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Have a nice day,
Mario

IMessage not working since 10.10.3 update

- Beginning two days 04/14 (after I updated to OS X 10.10.3 and iOS 8.3, iMessage stopped syncing with other OS X and iOS devices on the same iCloud account. All on the same network.
- Continuity and Handoff also do not work on the MBP...(worked great a couple days ago)
- MBP is on WiFi.
- I have cycled power, turned on and off wifi, logged out of iCloud, logged out of iMessage (on all devices).
- I did get notice on the other devices when I turned iCloud back on and wanted my keychain restored.
- MPB is also updated to 10.10.3 and no issues. All features work.
- iPhone and iPad are at iOS 8.3 (12F69)
Also, when attempting to send to known iMessage account holders I was not getting the blue, rather the red highlight on the names and the "not registered with iMessage" notice.
I am constantly being asked to login to iCloud

On the iPhone in Settings > Messages > Send and Receive
my iPhone Number is ticked/checked and greyed out. None of my other iMessage emails are listed, though. So when I tap "Use your Apple ID for iMessage" on this same screen, input my password, it acts like it's signing in, then stops whirling and it goes back to the same screen, as if it's waiting for me to sign in again. My password has been reset multiple times and it works when signing into my iCloud account at iCloud.com. So it's not the password. Also, in my iCloud account it confirms that all of my devices are
The same process occurs when trying to sign in to iMessage on my iPad. No go -- just returns the screen that prompts me to sign in.
When trying to sign in to iMessage on my MacBook Pro, I get the error message: "Could not sign in to iMessage. An error occurred during activation. Try again."
This is the same error message now for the past five days. Apple iMessage is NOT working!!
Also: in my iCloud account (settings screen), it confirms that all of my devices are properly signed in to iCloud.
Anybody out there getting this error message? ***!!

Bluetooth audio not working since 4.4.2 update

Since the update to 4.4.2 bluetooh audio no longer plays to my Marley Bag of Riddim portable bluetooth speaker...
http://www.thehouseofmarley.com.au/audio-systems/bag-of-riddim-bluetooth-portable-audio-system.html
But it does still work with my LG HBS730 bluetooth headset...
When on 4.3 it worked fine...with both the Bag & Headset
Interesting to note that my old HTC Desire (android 2.3.3) still streams audio via bluetooth fine to the Bag and also to my LG HBS730 bluetooth headset.
How can i fix it please? It is clearly releated to the 4.4.2 android update...
Thanks
Paul
Edit: Is it possible to roll it back to official droid 4.3 ??

I have same problem, after update no sound from my car player pioneer Mvh-350bt.

Wifi sync will not work since 5.0.1 update

since i did the IOS 5.0.1 update, itunes now will not wifi sync on my mac.
I've restored, ive reinstalled the IPSW manually...ive ticked and unticked sync in the options, ive deleted the backup file and set up as a new phone...
ive ran out of ideas...
PS, this seem to only be an issue with macOSx as wifi sync works on a PC with this restore...
Theres no new software installed and seems to be a mac vs iphone issue as my other half also has the same issue now with the mac.
Any ideas or is it a trip to the apple geeks?
thanks in advance
zesty2k

Same problem here with iPhone 4 and iPad 2.
Apple have just released iTunes 10.5.1 which I hoped was a fix but no.
Wired sync still works fine on both devices.
Ran iTunes diagnostics and the sync test caused iTunes to crash on several with both devices so there obviously seems to be a problem with the software.

Mail, Settings, iChat and other programs not working since 10.6.2 update

Since the 10.6.2 update some programs can't be opened any more.
They have a special sign on the program icon. The error message says something like:
The program "Preview" can not be opened because this type is not supported from a mac computer.
Thanks for your help!

in the package contents it says:
<dict>
<key>BuildVersion</key>
<string>4</string>
<key>CFBundleShortVersionString</key>
<string>5.0.1</string>
<key>CFBundleVersion</key>
<string>503</string>
<key>ProjectName</key>
<string>Preview</string>
<key>SourceVersion</key>
<string>5030000</string>
</dict>
</plist>
i didn't restore any older files.

Voice commands not working since V2.3.340 update

Similar Messages

Maybe you are looking for