Voice control no longer works after upgrade to iOS 4

Everything about iOS 4 has been great so far on my 3Gs, except that voice control no longer works. Holding the home button still brings up the voice control, and the "voice" confirms whatever action I say, but then instead of doing whatever it is supposed to, the phone just goes back to the home screen. Everything in voice control worked fine before I updated to iOS 4, so obviously it is a software issue. Has anyone else having the same issue?

I'm having the same problems. I have a 32GB iPhone 3GS which I upgraded to iOS 4.0 (previously running 3.1.3).
I've tried a full restore as well as changing the Voice Control language settings in General > International > Voice Control. I'm English and based in the UK and had my Voice Controls previously set to English (British). The weird thing is if I set my Voice Control to English (American) and then impersonate an American accent - then it works fine! Change it back and it's just the same - takes an age to finish recognising anything and then it's nowhere near what I said.
Hope that info helps out in diagnosing the problem.
J.

Similar Messages

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

TouchID no longer works after upgrading to iOS 8.1 on iPhone 6 Plus

TouchID no longer works for unlock after upgrading to iOS 8.1
I have tried removing my fingerprints on file and re-adding without any noticed improvement in performance.

Try a quick and rissoles Reset by holding the Sleep / Wake button and the Home button at the same time until the Apple logo shows then release the buttons and wait until the lock-screen returns. Now open you iPhone with your code and then click the Sleep / Wake button and then depress only the Home button. Now try you finger print.

Keyboard shortcuts no longer work after upgrade to ios 6

After upgrading to iOS 6, the keyboard shortcuts on my iPhone 4S no longer work. Not only that I can't change them either. If I add or delete a shortcut, it simply goes back to the way it was when I exit the settings and go back in. My iPad 2 doesn't have this problem, only my iPhone 4S.
I tried restarting as well as doing a reset (hold home and power button).
Any idea how to fix this?

If you want to go through all the steps I took:
1. Restart
2. Soft reset (hold home and power until Apple logo appears)
3. Reset keyboard dictionary
4. Reset all settings
5. Clear autofill
Only after the last step did things start working. Prior to that I couldn't make any changes I made to the keyboard shortcuts stick, though every now and then changes would take. Sometimes trying to delete a shortcut would crash the settings app. In all cases the shortcuts didn't work.

Remote app no longer working after upgrade to iOS 4.3 and iTunes 10.2.1 (1)

I am unable to use my Remote app 2.1.1 with my iTunes 10.2.1.
I recently updated all software/firmware as follows:
1st Gen iPad - iOS 4.3 (8F190)
iTunes - 10.2.1 (1)
Remote - 2.1.1
I am using an iMac circa 2005 (6.1)
Mac OS X 10.6.7
2.33 Ghz Intel Core Duo; 2 GB 667 MHz DDR2 SDRAM
Wirless Router: Netgear WNDR3400, SSIDs off, WMM enabled.
I have turned on Home Sharing on both iTunes and the Remote app.
I have made sure that both iMac and iPad are on same network.
I have made sure that iTunes is allowing incoming connections through the firewall settings in system preferences.
I have deleted and reinstalled both iTunes on the iMac and Remote app on the iPad.
I have trashed the preferences for iTunes.
I have gone to Settings on the iPad and turned on Home Sharing through the iPod app.
I no longer see "Automatically search for iPods, iPhones, or iPads" in the iTunes preferences...ANYWHERE.
I have reset the router.
I have reinstalled iTunes 10.1.1 - didn't work, re-updated to 10.2.1
Installed Mac OS X 10.6.7 combo update.
Nothing seems to work.
iTunes does not show my iPad when the Remote app is launched and gives me the 4 digit code to type in to pair it.
Anyone else having this issue?
Any solutions?
Thank you,

same issue iphone 4

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

Microphone no longer works after upgrade to windows 8.1

After upgrade to windows 8.1 my internal microphone no longer works.
I tried installing updates suggested in other posts with similar driver problems but they did not work.
HPSupportSolutionsFramework-en-11.51.0048 did not work.
My internal microphone is IDT High Definition Audio Codec
When I go through the control panel and look at it - it shows a status of "not plugged in"
Please help
thanks

OK I am a little confused.
There has been no response on this subject in over a week. Not since I responded to your questions regarding product name and number.
However I just received the following email from you:
Hello gordml,
The questions you posted on the HP Support Forum recently received one or more answers.
Question: Microphone no longer works after upgrade to windows 8.1
Date: Sun Dec 21 01:01:56 PST 2014
View the answer(s).
Did this reply resolve your post or question?
If yes, then share the good news! Let others know this reply was helpful by accepting this solution.
You can also show your appreciation by giving kudos.
We appreciate your feedback. It's what keeps our community such a helpful, vibrant place for our members.
Thanks for being a member!
The HP Support Forum Team"
Why would this be sent to me if there has been no recent replies on this issue?

IPhoto no longer work after upgrading to Mavericks.

My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?

kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps.

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Ipod Worked by voice control in my Ford Sync, then I connected to Itunes to update and voice control no longer works!

My Ipod worked by voice control when it was connected to my Ford Sync. I connected to Itunes to update and transfer music and voice control no longer works. Help?

Its is a 5th Generation Ipod Classic with video NOT a NANO!

Script no longer works after Upgrade to 10.4.6

The following script worked fine using 10.4 thru 10.4.5 but no longer works after upgrading to 10.4.6.
When I highlight a folder and then run the script the highlighted folder is moved to a specific "Achive" folder, depending on whether the highlighted folder has a ".0" or ".1" or etc in its name.
When I run the script using 10.4.6 I get an error indicating that the highlighted folder already exists in the destination.
Anyone else having Applescript problems with 10.4.6?
--Bob
tell application "Finder"
activate
set fname to selection as string
if fname contains "0." then
move selection to folder "ARCHIVE" of folder "0JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "1." then
move selection to folder "ARCHIVE" of folder "1JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "2." then
move selection to folder "ARCHIVE" of folder "2JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "3." then
move selection to folder "ARCHIVE" of folder "3JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "4." then
move selection to folder "ARCHIVE" of folder "4JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "5." then
move selection to folder "ARCHIVE" of folder "5JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "6." then
move selection to folder "ARCHIVE" of folder "6JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "7." then
move selection to folder "ARCHIVE" of folder "7JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "8." then
move selection to folder "ARCHIVE" of folder "8JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
else
if fname contains "9." then
move selection to folder "ARCHIVE" of folder "9JobsArchive" of folder "Archived_Files" of disk "Preflight_Only"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end tell

I, too, immediately started having problems with my scripts immediately after updating to OS 10.4.6. I put my scripts in "Library/Applications/..." so that the scripts associated with particular applications are available in the menu bar. I don't know if that has any bearing on the problem, but for me, it was not any particular script, but just about every one that started going funny.
First, I noticed that my scripts would typically work right once, but fail in some odd manner the second time I tried to use one. The second thing I noticed was that the modification dates of my scripts were changing to the time that I last executed the scripts, even though I had not altered and recompiled any of them in weeks. Finally, I noticed that the scripts that were failing were ones in which I had used property statements to initialize some of my variables.
What I think is happening is this: for some strange reason 10.4.6 is recompiling scripts every time they are run, and variables are being initialized, not to the values specified in property statements, but to whatever the variable was the last time the script ended.
I discovered that I could prevent this from happening by (1) recompiling all my scripts to make sure all the property statements were back in effect, and then (2) setting the permissions of all my scripts to read only. This seems to prevent whatever in 10.4.6 is recompiling the scripts from doing this each time the script is run. At least, the modification dates are no longer changing inexplicably, and all my scripts are running reliably again.
It's a bit of a pain to have to remember to reset script permissions to read/write whenever I want to make a change, and then change them back to read only before executing, but it seems to be a reliable workaround. I'd appreciate hearing if anyone else can replicate this phenomenon, or tell me if I'm on the right track.
Jeff Johnson
Dual 1.2 GHz Mac OS X (10.4.6)
Dual 1.2 GHz

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion. They DO work on a lenovo machine but not my imac

On 2011 iMac, External Altec Lansing speakers no longer work after upgrading to Mountain Lion.
They DO work on a lenovo machine but not my iMac. reset Pram - no luck. took speakers from wife's desktop, they
do not work when jack plugged into my iMac - Sys Prefs "SOUND" only lists "internal speakers/ built in" as available options.
I used my altec lansing speakers on 3 macs including this one for 5-6 years.....now with Mountian Lion I can only get internal speakers???
Ideas? Any/All help would be greatly appreciated - been going nuts with this for 2 days now.

Hi,
When you start Messages fro the first time you are asked for an Apple ID
When this is verified and entered it appears in Messages Menu > Preference > Accounts and is Enabled.
The App should have also picked on on those iChat Accounst you had before.
These should be Enabled if they were when you last used iChat.
Exactly which "Accounts" are logged in can be seen in Message Menu > Accounts and will include the iMessage "Account" and Bonjour.
In the Window menu you will see CMD +0 for the Messages window and CMD+1 for the "Buddies" window which is a combined list at this stage.
Go to the Preferences > General Section and Untick the "Collect all accounts into one list".
This will give you separate iChat type Buddy lists.
You can check if that account/Buddy list is set to Invisible or if in the Preferences > Accounts > Security you have settings that will block some people from seeing you as On line.
You are saying Buddies can see you as On Line which implies they are still sending to your AIM based Names (@Mac.com is a valid AIM Screen Name)
I am not sure from your post if you are trying to iMessage their email IDs thinking they are Apple IDs and that they are using Messages as well.
There is no Buddy list for iMessages side
No-one can tell you are "On Line" until they have your details in the "To" spot in Messages with the correct iMessaged contact info (iPhone Number or Apple ID)
Obviously an Apple ID can be an email or look like one.
In some cases they are also valid AIM Screen Names as well.
In the case or the @mac.com name you may have linked this Apple ID to iMessages as well.
11:31 PM Saturday; August 11, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why does the ipad 2 speaker stopped working after upgrading to ios 8

WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

Hi A_S85,
It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Voice control no longer works after upgrade to iOS 4

Similar Messages

Maybe you are looking for