Voice Control Volume

Using Voice control via pressing the headphones and asking "what's playing?" continues to be
accurate but the volume is suddenly way way lower than it used to be. It's out of whack with the
music volume where before the speaking voice was comparable to the music level. Is there a way of
changing the volume on the voice control voice?

Same here
Please help
Music is loud but when I use voice control the voice of the voice control lady is barely audible.
I have ipod touch 3rd gen on ios 4.0

Similar Messages

  • Voice over - volume

    Need help.
    volume of ringtone and music is ok but can't setup the volume of voice control.
    the voice control lady is barely audible and volume bar is at maximum
    iphone4
    iOS5

    Hi there,
    Not sure if this will help, but I think you can use a mic to do a voice over. You can use the line in option when setting up the voice over. But you must have a quarter inch jack on the mic.
    Saxman10

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • Voice control does not kick in place of SIRI when there is no internet connection

    i have an iPhone 4s. i mainly use WIFI at both home and work. and am quite happy with SIRI. but when i leave home for work or am on my way back home after work quite often i press and hold the volume button to give voice command to call my wife. but SIRI does not work!
    well, because SIRI needs internet connection and i dont bother using mobile internet (cause then i will need to turn on 3G which drains my battery like nothing on earth) it can not work.
    but why does not my ordinary voice control kick in? since 4S is such a great gadget and is so smart in every way (apart from the pictures taken with the volume button could not be turned to adjust orientation in windows!) i was expecting this would be a normal thing to expect from it.
    anyways, hope someday they would fix this. 

    I'm assuming you can either use Siri or Voice Control, but not both.  I think if you turn Siri on the activation used to use Siri is removed from Voice Control and vice versa.  This is just my own theory.  Maybe a future software update might allow this.

  • IPod touch suddenly fast forwarding through songs and videos + voice control screen cutting in

    Hi
    In the last couple of days, it has started fast forwarding through songs and videos randomly. The voice control screen is also cutting in randomly. It happens as soon as I turn it on and play my first track or video. The only other problem I have noticed is that the volume controls on my headphones are no longer working. The headphones would be less than 6 months old and are genuine Apple ones. I don't think the problem is related because if I unplug them the fast forwarding still happens. I've tried powering it off and then re-starting it and I have been keeping the software up to date on it so I'm not sure what else I can try.
    In saying that, this morning it seems to be working properly but I'm worried the problem will return. I still can't adjust the volume via the headphones though.
    If anyone has any ideas about what I can do to resolve the fast forwarding problem, I would appreciate the feedback. The headphones I don't really care about because I can replace them.
    I've had my iPod touch for a few years and use it pretty heavily so part of me is wondering whether it is just getting to the end of its life. I'm not sure what sort of lifespan I can expect from my iPod touch.
    Thanks

    Try:
    - Try a regular pair of headphones
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Does the Sennheiser MM50 work with Voice Control?

    I'm not double posting -- over at "using 3Gs" I asked if anyone had any idea what other earphones I could use with voice control, but after researching these Sennheiser MM50 iP phones look like just the ticket... except I'm not sure they work with the voice control itself.
    They have a mic and a pause/answer button -- has anyone tried theirs to see if it will do the same job on voice control as the Apple earbuds do? (Which, IMHO, is superb). I do hate to give up volume control, but I can live without it for better overall sound (too bad the VC doesn't allow you to just say "louder" or "softer" <g>.

    Mike Kelley wrote:
    I'm not double posting -- over at "using 3Gs" I asked if anyone had any idea what other earphones I could use with voice control, but after researching these Sennheiser MM50 iP phones look like just the ticket... except I'm not sure they work with the voice control itself.
    They have a mic and a pause/answer button -- has anyone tried theirs to see if it will do the same job on voice control as the Apple earbuds do? (Which, IMHO, is superb). I do hate to give up volume control, but I can live without it for better overall sound (too bad the VC doesn't allow you to just say "louder" or "softer" <g>.
    I would assume all earphones work that have a mic. No reason why they shouldn't

  • Changed voice control after update.

    After updating my iPhone 4 to iOS 6, the voice control sounds different. The volume is low and the voice is more... robotic! Is it fixable?

    I am having the same problem, looks like apple was to lazy to record all the new speech.

  • My iPad 2 has finally got ios 7 but voice control is not there is there a way to get it back

    Does voice control come with ios 7 for iPad 2

    What are you calling "voice control"? Volume control?
     Cheers, Tom

  • Issues...rattling when back is tapped...voice control just turns on

    Ok...its the first time ive used my iPhone 3GS without a case...just noticed that when i tap the back i get a little rattling noise, when i shake the it i dont hear anything. Also when i use the old iPhone earplugs sometimes the voice control just opens after a couple of taps and calls...
    So for the rattling noise...is this normal?
    For the voice control...is it baecase i use an old iPhone ear plug? I havent even used the new one that came with the GS...since i dont realy care about having volume control...
    Any comments?

    I believe it is the autofocus lens you can hear as my 3GS also does that.
    I am not sure about the voice control problem as I used the ones I got with my 3GS after I upgraded from my 2G and I really like the volume control on the earbuds.
    Your best bet is to try the ones supplied with the 3GS and see if you can recreate the problem then you will know for sure.

  • N95 Problem with voice tag volume

    When playing a voice tag the volume is so quiet it cannot really be heard. The automatically synthesised voice recognition is so poor and even worse company names like Eyeplan or EPS are unreconisable! How can the volume be increased so at least I might then be able to mimic the voice synthesiser?
    Of course when used on the move, handsfree without adequate voice recognition commands or volume control this product has a serious flaw for any business user.
    I hope someone has a fix for this and soon. Can anyone offer me any advice other than to return it for a refund?

    I suspected a firmware upgrade might be the only possible solution to this voice tag volume problem. Quite a shame really. For the life of me I cannot understand why the volume is not adjustable since just about everything else is.
    This is a big problem for people without hearing problems let alone all those with one.
    Can anyone suggest how I should encourage Nokia to address this issue and produce a firmware upgrade?
    As I see it the only alternative appears to be to return the product for a refund. I would caution anyone needing to use voice tags for hands free operation to be aware of this issue before making a purchasing decision.

  • Disable voice controls on 4s?

    i have a 4s and my home button no longer works (thanks to my teething 14 mo old) so i had to disable siri and now my voice control is dialing everyone constantly! help! everything the internet says to do doesn't work!!!

    Hi!
    I will explain exactly my problem:
    I have a simply BT handsfree, when in enter on car it pairs automatically with the n97.
    I have to say that i use the handsfree only to play music on the car... is the main function for my use.
    Ok, when is just paired and i try to push "play" on BT "HF" the mobile starts the voice command tutorial, the last week i've activated by mistake the voice commands and at this moment the phone waits for a command, not plays music.
    It's very curious because when just buyed the handsfree it just directly plays music when i push "play" on it, i want to understand the reason because actually it doesn't works like the first days.
    I've checked that if i push 3 times the volume buttons on handsfree it "activates" the music function and i can push play button to listen music.
    I really don't use voice commands, i don't like so much... this is the reason of my question, if it's possible to disable it totally to avoid voice commands waitings...
    Sorry for my bad english, i try to write as best without using a traductor
    thank you!

  • Voice Control voice very low

    Is there any way to increase the voice control voice level. It is very low relative to other sounds on the phone (music etc). The voice level stays the same even if I increase the iphone volume.

    Yea, I have a friend who has noticed this issue on his Z10.
    I've tested on my Z30, and the voice feedback is loud and clear. We'll have to figure out the differenced in the devices or OS release, or settings.
    What is your Operating System loaded to your device? Look at Options >  From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Silencing the iPhone Voice Control

    My iPhone sounds a confirmation tone whenever I press and hold the home button to activate voice control, even if it's in silent. The only thing I can do is go into voice control, and turn the volume all the way down, but then it stays silent when the phone is in ring mode.
    Is this behavior default? If it is, it makes no sense.
    What can I do about it? (I talked to an Apple representative and he said I could disable voice control via restrictions, but said ability has elluded my efforts)

    saxplayer2192 wrote:
    (I talked to an Apple representative and he said I could disable voice control via restrictions, but said ability has elluded my efforts)
    You can disable access to voice control when the iPhone is locked, Settings>General>PassCode Lock>Voice Dial Off.
    But, that is the only way to disable it. You can leave feedback here:
    http://www.apple.com/feedback/iphone.html
    Message was edited by: wjosten

  • How do you disable voice control on iphone 4

    Voice Control doesnt seem to work to create a text message on iphone 4 like it does on the 4S.  How do I disable Voice Control all together on a 4?

    capsjenwalker wrote:
    How do I disable Voice Control all together on a 4?
    Sorry, you can't. There is no setting to completely disable such.

  • How can i turn off voice control on iphone 5s

    hello
    my home button is not working well. so its stuck on voice control... i would like to turn it off completely, siri and the phone voice control

    Hello there, Yelis2591.
    The following Knowledge Base article offers up some great steps for troubleshooting your home button:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    The Home button is slow to respond
    If the Home button is slow to respond when exiting one application, try another application.
    If the issue exists only in certain applications, try removing and reinstalling those applications. Get further assistance in installing and troubleshooting applications.
    If the issue continues, Try turning iPhone off and then on again. If the iPhone will not restart, try resetting it.
    If the issue is still happening, try to restore the iPhone.
    Seek service is the issue is still occurring.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for