Voice deployment design help required

Hi All,
We have a scenario in which I need to design a voice deployment solution.
The scenario is that we have multiple CUCM v9 clusters interconnected with a CUCM Session manager in Europe. In Asia we have more number of clusters (Cisco CM clusters, Avaya CM clusters and analog PBX) which are not interconnected and no on-net calls happening in between. The plan is to retain the existing Asian clusters (Cisco CM clusters, Avaya CM clusters and analog PBX) as it is and to have on-net call facility to be enabled between EU & Asian clusters. The ISP (service providers) which serves us in EU do not have their service in Asian region but it can be achieved with the local ISP in Asia with some limitations. Both the EU ISP and Asian ISP will be peered in between.
Please let me know how I can achieve this on-net calling facility between the EU clusters & Asian clusters. I have noted down three types of possible solutions down below. Kindly let me know which one would be technically more appropriate.
1. Make all the Asian clusters register with CUCM session manager. In this case I am not sure how it will work with Avaya CM & Analog PBX
2. Introducing a Gatekeeper in Asian region. This will help us in consolidating the dial plans of all the Asian clusters and thus we can add this GK in CUCM session manager. (Not sure if GK can be added here)
3. To have ICTs, SIP and Q.Sig trunks in between all the clusters. I think this is an unsuitable solution.
Any help would be greatly appreciated.
Thank You,
Nish

In this situation, I would use SME (CUCM Session manager) to integrate All cucm and Avaya PBX using SIP trunks between SME and Other cluster/Avaya CM as it would centralize the dial plan and make the integration simple to manage and troubleshoot. The only challenge is to integrate Analog pbx there I would use qsig, if analog PBX and Asia CUCM' gateway are located at same location then simply I would connect e1 cable between Analog PBX and Cisco voice Gateway and adjust the dial plan accordingly.
Suresh

Similar Messages

Ask the Expert: Cisco's 802.11ac Solutions - Deployment, Design, and Interop

Ask your Questions on Cisco’s 802.11ac Solutions - Deployment, Design, and Interop with Cisco Experts: Richard Hamby and Shankar Ramanathan.
Monday, March 30th, 2015 to Friday, April 10th, 2015
Richard Hamby is a senior technical support engineer and Team Lead of the Cisco Technical Assistance Center in Richardson, Texas. He is an expert in Indoor and Outdoor wireless for the full line of Cisco Unified and Converged Access Wireless products, as well as TAC Engineering Engagement Engineer liaison to project engineering teams for new Cisco wireless products. Prior to his current role, Richard was a customer support engineer with the AAA Security TAC team supporting Cisco identity management solutions and been with Cisco since 2009.
Shankar Ramanathan is a Customer Support Engineer at the Cisco Technical Center. He is a Technical Content Engineer and Subject Matter Expert for Cisco Enterprise Unified and Converged Access wireless mobility solution including Wireless LAN Controller 2500/5500/WISM2/7500/8500, Converged access 5760/3650/3850 switches, Access Points Lightweight and Autonomous, VoWLAN (792x/9971) , Cisco Prime Infrastructure SNMP management, Cisco Mobility Services Engine(MSE/ CMX). Prior to joining Cisco in November 2011, he worked as a wireless network engineer at Elan Technologies, responsible for RF wireless network planning, simulation, propagation path analysis, and optimization of Wi-Fi 802.11 mesh and WiMax (802.16 d/e) networks for various system integration and automation projects. Shankar holds a master of science degree in electrical engineering specializing in communications and signal process from the State University of New York, Buffalo. Shankar has a CCIE in Wireless(#40548) and CCNA certified (number 410004168640IMZF) and has over six years of industry experience.
Find other https://supportforums.cisco.com/expert-corner/events.
**Ratings Encourage Participation! **
Please be sure to rate the Answers to Questions

A common question we are asked is 'why is my device not achieving 11ac data rates?'
One of the most common answers relates to client compatibility/capability. To get the highest possible data rates of 11ac (assuming proper distance and RF health), the AP and the client device must both be capable supporting the requirements - 5GHZ, 80MHz Channel, short guard interval, 3 spatial streams. Each spatial stream has a max of 433.3Mb/s (at 80MHz, short GI).
The majority of 11ac-capable wireless cards on the market do not support 3 spatial streams. Most adapters in wireless-capable devices are 1SS or 2SS. For example, the Intel 7260 11ac adapter used in many devices is a 2SS adapter - therefore it's max possible data rate is 866.7. Another common adapter in use is the 11ac Broadcom 3SS that Apple uses in the newer Macbooks. These devices can achieve the 1.3GBs PHY data rate.
This guidance is the same for 11n adapters as well. To achieve max rate, your 11n AP and adapter must both support 40MHz channels, 3SS, short GI.
Note: The 11n and 11ac standards both define support for 4SS. 4SS-capable devices are rare, so 3SS is essentially our reality.
One of the most useful references for questions related to this topic is the AP Data Sheet for each AP. Here's the AP3700 for example:
http://www.cisco.com/c/en/us/products/collateral/wireless/3700-series-access-point/data_sheet_c78-729421.html
Table 1 lists the expected data rate per MCS Index value by #SS at each channel width and GI. Indexes 0-7 are the same for 11n and 11ac (11n limited to 40MHz channels of course). And MCS 8 & 9 are 11ac-only 256-QAM modulations.

Non-profit needs Dreamweaver design help

Small non-profit serving homeless veterans and veterans in crisis needs design help with Dreamweaver website. The website was created as a school project by university students but there are some design issues that we are not able to correct.

It appears to be template driven so the basic layout is inside your site folder's Templates directory -- main.dwt. This file drives the site wide elements such as navigation, common headers, footers and sidebars.
Child pages created from that main.dwt file contain editable regions for content that will change from page to page. Only content in these editable regions are editable from child pages.
Whoever will be responsible for updating content should get familiar with CSS & HTML code. This is required knowledge to work with Dreamweaver.
Start here:
HTML & CSS Tutorials - http://w3schools.com/
Code validation tools
http://jigsaw.w3.org/css-validator/
http://validator.w3.org/
Also thoroughly read DW's Help docs (F1) under working with DW Templates.
It looks like the students did a pretty fair job of building the basic site for you. Now it's up to your org to swap out the generic stuff with relevant content. I don't advise you to alter the basic layout or structure. It's all there. You just need to get up to speed on how to work with it.
Nancy O.

Design Help! Add new lines

Hi All,
I need a design help for adding extra lines on an existing order.
I have a page with 2 subtabs, first one is for order header info inputs and second one is for line info inputs. The line subtab base on user selection may generate mutile lines in lineVO (multiple rows). After user clicked an apply button on line subtab, a header row will be committed into header table and line row(s) will be in line table.
I was trying to have another button to allow user enter extra lines after committed existing header and line VO. After user click the "add extra line" button, I retain AM to keep header VO but flush out line VO, with this way, framework will try to delete lines in line table.
Since there are lots logic requirements, I can't keep adding lines after line VO.last() without committing first round line entering.
How can I keep Header VO, clean line VO, then enter new line(s) info as ADD but not DELETE/UPDATE? any suggestion??
Thanks & Regards,
KJ

Hi Shreya,
I am not sure about giving new line in each and every page, but there is an alternate. You can show all data in one single page. That is how much ever records you have, they will be shown on one single page, instead of spanning across multiple pages. You can achieve this by changing the property "Number of Data rows displayed at once" from default 100 to 0.
Hope it helps.
Regards,
Arunan.C

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

I just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

i just got the iphone 4s and i cant figure out how to get siri to work it seems to be the old voice command. HELP!

Did you enable Siri in settings?
Settings > General > Siri > ON
If Siri is off, all you get when pressing the home button for 1 second is the old Voice Control.

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

Help Required - Oracle AS 10g

hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])

@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir

Help required from JDeveloper Development Team.

HI there,
I Download the JDeveloper 10.1.2 (1811) from OTN, But the downloaded archive file is unable to open. I did the download once again but I am facing same problem. I want to JDeveloper 10.1.2 for the installation of BI Beans 10.1.2.
Help required from JDeveloper Development Team
Thanks For Your Time,
Regards,
ViSHAL.

Please use an informative Subject line, there is more chance that people will read the post.
All we can suggest is that you try the download again.

Voice deployment design help required

Similar Messages

Maybe you are looking for