Voice dial turns on after Update

Hello,
first, sorry for my bad english.
I have an iPhone 5S. I deactivated Voice Dial (Settings - General - Touch ID - Voice Dial) because my little daughter loves to play with my iPhone. But after any iOS Update, the Voice Dial function is turned on. And after any Update i recognized it after my daughter "call" someone. Hope Apple will fix this bug.

Are you sure you lost the app, or did you just lose the widget? Reason I'm asking is that the small square widget that we had in Gingerbread was replaced by a bar-looking widget in ICS; Google Search and Voice Search are now combined on that bar-looking widget (the Google Search widget mentioned in the earlier post). Since you said that the Play Store said it was installed on the phone, have you verified that by going into Manage Apps and seeing if Voice Search is listed under All?

Similar Messages

Mac 10.6 won't turn off after update

Macbook air a1304 won't turn off after updating unless you push on/off button.

Phone your nearest HP Support to request warranty service. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My iphone4 wont turn on after updating to ios5

my iphone4 wont turn on after updating to ios5

Hi
Sounds like it's broken in a potentially major way after the drop. You really should take it to your nearest Apple Store/Apple Authorised Repair Centre a diagnosis and quote.
Can't think of anything else any of us on this user-to-user forum can do for you?
HTH?
Tony

Sony A7 failed to turn on after updating firmware 2.00

As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

I bought the Sony A7II a few days ago. It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer. Neither one would get the charge light to illuminate. Not feeling the love Sony. I just purchased a Flash, wrist belt, filters, etc... I'm definitely not happy. It seems this is a problem!

Ipad air wont turn on after update today?

ipad wont turn on after update today. cannot do a hard reset either...
tried holding the power and home at the same time, still won't turn on suggestions?

How long did you hold the power and home buttons? You need to do that for about 30 seconds, sometimes even more before the apple logo appears.

Iphone does not turn on after update to ios 7

My iphone dies not turn on after update to ios 7
it keeps showing the message : (connect to itunes)

What type of computer do you have?
Were you updated to the latest version of iTunes?
You may need to follow these steps:
http://support.apple.com/kb/TS3281?viewlocale=en_US
Good luck!

My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, even after seeing the low battery image, i tried to charge the iphone. Then I tried to connect to itunes. But itunes cant recognize the device. What should I do?

My Iphone doesnt turn on after updating. It keeps on blinking the apple logo, after seeing the low battery image, i tried to charge the iphone. After charging for 30 minutes, it still wont turn on but keeps on blinking the apple logo. It has been blinking for 2 days. Then I tried to connect to itunes, but itunes cant recognize the device. What should I do?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work.
Unauthorized modification of iOS > http://support.apple.com/kb/HT3743

Voice dial not working after upgrading to iOS 5

After I upgraded my iPhone 4's operating system to iOS 5, voice dial is not working any more. When I press and hold the home button, voice control is enabled but only music-realted features (such as play, pause, etc) and "what time it is" work. The "dial XXX" and "call NAME" option don't work any more, and in the blue screen that is shown for voice control, I don't see the word "dial" appearing any more.
My friend who has iPhone 3GS upgraded and she doesn't have this problem.
Do I have this problem because I made a mistake during upgrade?
Is there some place where you can specifically disable/enable voice dial?
Or, is it Apple who disabled this feature, to temp iPhone 4 users to upgrade to iPhone 4S to have that feature back?

No, because I don't even know how to do that. I just restored the phone to one of the previous backups I had, using iTunes. The OS was unchanged (iOS 5) but the functionality was restored.
In this process, I lost all my applications, but my notes, contacts, etc were untouched (see below). As for apps, all I had to do was to look at the list of my apps in iTunes, and reinstall them.
If you want to do the same thing, note that you may lose your contacts or notes if you simply restore an old backup. Before you do so, enable iCloud and make sure your contacts and notes (and other important things) are backed up in iCloud. Then, after restoring your phone, enable iCloud again and it will fetch all the contacts, notes, etc that you might have added after that backup you just restored.

Voice memos app crashing after updating to iOS 8

After upgrading to iOS 8 today, when I launch the Voice Memos app, it attempts to re-index the memos and then in the middle of the process, it crashes. When I re-launch the app, it simply says "No Recordings".
I was really distressed, because I had some adorable recordings of my 3 year old that I didn't think I had backed up yet. I restarted the phone and it tried to index again and crashed.
If you run across this issue, don't panic - they are still on your file system on your phone. Apple will hopefully fix the bug soon. In the meanwhile, to retrieve them, you can use a program that can read your iphone's file system. I used a tool that turned up after I did a search "download iphone file system reader ifun".
After connecting the phone, I went to the leftmost tab and right-clicked "Voice Memos". There is an option there to copy the files to the computer. After they all copy, try dragging the files into iTunes and you should hear all the memos again.
Good luck!

Yes. Me as well. Did a factory reset on my iPad 3 (because iOS 8 killed speed and was crashing) Now I need to do some reinstalls. When I hit the cloud download icon it spins for a second then goes back to the reinstall cloud icon. Nothing!!

My iphone 4s cannot be turned on after updated to ios 7. can anyone tell me how to solve this

my iphone cannot be turned on after a week i updated it to ios 7. I have tried many solution to turned it on but none of them works. Now it only appear the apple logo on my screen since 5 hours ago. Can anyone suggest me the best solution

Hello Anis Squared,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Icon turned red after update to 12.0.1.26

My iTunes icon on my desktop turned red after I updated to 12.0.1.26. Does that mean something is wrong with my iTunes? It has never been red before.

gaetano259 wrote:
My iTunes icon turned red as well after installation but when I tried to open it came back with an error say it was not installed correctly. Has anyone else had rhis problem?
As given, the red icon is by design.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Q10 Won't Turn On After Update

I am currently on Windows Phone and wanted to try Blackberry 10 as I am fan of my old Blackberry. I wanted to try it out cheap so I bought a Q10 on Ebay for $50 even though the seller said the phone had a water damaged sticker thinking I could fix it. I also bought a brand new battery from Amazon to go with it.
So my issue is when I got the phone, it was having trouble connecting to Link and reloading the OS would fail due to connection loss, so I nuked the phone with a program to clear the phone. I also soaked the phone in isopropyl alcohol after reading that soaking it could get rid of mineral deposits on water damaged phones. After the nuke and clean, the phone does the two quick blinking red lights which (I think) means the phone has no OS on it which is what I wanted after the nuke.
So, I plug the phone into the computer and Link recognizes it as a Q10. I have BB OS 10.2 downloaded and went to reload it. It completes the update all the way with a green LED on the whole time it is updating. When Link says to unplug the phone to let it reboot, the phone does nothing. Holding down power for any length of time can't turn on the phone. Plugging the phone into a wall charger causes the orange charging LED to flash on like it's going to start charging before quickly turning to a red LED while it stays plugged in.
I nuked the phone and tried Autoloader which does the same thing in the end as the phone won't turn on when it unplugs from the computer after updating. Seeing as how the phone is recognized by Link, seems to update correctly with the green LED on, and can be nuked fine, is there any way I can get this phone to work? It seems as though the battery isn't charging because once I unplug from the computer / wall, nothing seems to do anything and the LED doesn't flash. It is a new battery, so could the water have caused an issue on the circuit board which is not letting the battery charge?
Any help is appreciated, and I am willing to try pretty much anything and have decent knowledge of software / hardware. I have done tons of searching for similar issues to no success, but have not found this exact problem. Thanks in advance for any help!

OK, you bought a new battery which I would recommend, and it still is NOT charging or powering on.
You've done this already >> Make sure you let it charge with the wall outlet charger for several hours and then with it still connected to the wall outlet charger, remove the battery and reinsert... what happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS1814 Getting phone to turn on after update

i'm trying to get my phone to turn on after i updated it. I've connected my phone to itunes like it said to do and it says I am not connected to the internet, which i am. What am i suppose to do so i can get my phone to turn on.

Hi isabel1015,
Welcome to the Support Communities!
The article below may be able to help you with this.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
- Judy

Voice dialer installed unsolicitedly after 4.2.2 to 4.3 upgrade

It is about Xperia Z Tablet LTE with Sony original firmware on it.
Upgrade from 4.2.2 to 4.3 has been conducted.
Upon the upgrade the user realized presense of new app, the voice dialer.
It was definitely not installed before the upgrade.
The tablet is a data-only device. Classical voice calls are not supported.
If voice calls than only via packet based connections.
So user wanders how the dialer can help on Tablet.
If it can help while dialing on when VoIP-ing there is no possibility to say the dialer
what a VoIP solution is in use, where installed and where it is to be found.

any idea

IPad won't turn on after update to ios7

After updating to ios7 on my iPad, it would keep resetting itself and show the apple logo until finally starting up. Over a few days this got worse and worse and eventually stopped working where I would have to hold the home and on/off buttons to reset it. I have now reached a point where it no longer starts up. Having went to an apple store they say they can't identify the issue as they can't start it up and offered me to pay £199 to have it replaced (how very nice of them). I have had online chats with an advisor and a senior advisor who have diagnosed this as a 'hardware' issue!!!
Guess what apple, no it is not, this is a result of the updgrade to ios7!!! My iPad worked perfect before and I will not be paying £199 to replace it!!!
If anybody else has had similar problems please let me know.
Thanks.

Try this reset ...
Tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore the iPad > Tunes: Restoring iOS software

Voice dial turns on after Update

Similar Messages

Maybe you are looking for