Voice dictation and no audio output from speaker

I am using a external stereo microphone connect to the macbook pro 2010 and use the dictation for cantonese on chrome browser, all this part is ok, but say for example when I search for a video is ok, after that when I play it the audio is not enable, I have to click system preference then it will come up again.
any idea what might be wrong
it is under osx 10.9.2 with 8g of ram
thanks.

Well, as you have problems with two machines add both machine's details following >>Posting Guide<< as already said.
Reinstall in any case realtek audio: http://www.msi.com/service/download/driver-2584.html
Quote
My video card is an MSI GeForce 9800.
Which?
http://www.msi.com/service/search/?kw=n9800&type=product

Similar Messages

Simultaneous audio output from Ipad and bluetooth ?

Is it possible to have simultaneous audio output from IPAD and a bluetooth speaker? At present I can only get audio from the Bluetooth Speaker and nothing from the IPAD's audio out! My purpose is that my Mom will hold the IPAD to listen to her Audiobooks but my Dad who sits across the room and is hard of hearing needs a speaker close to him, so I need simultaneous audio from both devices.
JW

Use this: http://smile.amazon.com/KOKKIA-A10m-MULTI-STREAM-Transmitter-concurrently/dp/B00 69G1SIC/ref=smi_www_rco2_go_smi_1968491462?_encoding=UTF8&*Version*=1&*entries*= 0&pf_rd_p=1968491462&pf_rd_s=smile-campaign&pf_rd_t=201&pf_rd_i=B0069G1SIC&pf_rd _m=ATVPDKIKX0DER&pf_rd_r=1N57Q0YT9QW7Y1K596YD and use two Bluetooth speakers for them. The speaker output on the iPad is pretty limited and your mother will probably have a hard time hearing it. Get a BT speaker for both and the above device and they both can listen from whatever location they want (within 40 feet) and get better sound.

No audio output from the orange mini j

Hi all,
I am having problem with my Audigy 4.
Hope you know what I mean, there are three 3.5mm mini jacks
of three different colors: green, black, and orange.
I have noticed that there are audio outputs from the green and black mini jacks only, while the orange mini jack seems to be not working at all.
When I plugged an earphone line to the orange mini jack,
I could hardly hear any sound from it.
Any idea?Message Edited by kwfine on 07--2007:03 AM

The orange jack is the center/subwoofer audio jack. If you're using a 5. speaker system. Make sure you have selected 5. speaker setting in the speaker setup software.
Jason

HT1222 my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix))

my iphone 4S no longer plays music output to speaker after updating to version 6.1.3. I am unable to reset the phone to an earlier version! How do I get my audio output to speaker back? (music, audible, youtube, netflix)

So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

Airport Express and the audio output.

I bought an Airport Express sometime last year, when it first came out. I don't have any of the packaging or the manual with me. What I would like to know is if Airport Express had support for both analog and optical audio output right from the start (when it was first released).
Thanks.

Since its release over a year ago, there has only ever been one hardware version of the Airport Express. Therefore - yes - a combo analog/optical digital output has been built into the Airport Express right from the start.
You can download PDF versions of all the manuals at:
http://www.apple.com/support/airport/

Multi channel audio outputs from a laptop such as 5.1 or 7.1

is it possible to get multi channel audio outputs from a laptop such as 5.1 or 7.1 for watching Movies or television while using Windows media Center.

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

Analogue Stereo Audio Output from the New Mac Pro

Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)

It is line-level. You will need powered speakers or an amplifier.

I recently downloaded the latest OS update and now I have a constant "humming" noise from my MBP and my audio output is no longer working. Any suggestions?

I recently downloaded the lastest OS update (Lion X 10.7.4) on my MBP that I purchased in November of 2011, and since downloading it my MBP has been making a constant "humming" noise from the right speaker/disc drive area. I also don't have any audio output for FaceTime or Skype. I attempted to use Photo Booth to record a video and it doesn't record any audio. I attempted to reset SMC and reinstall Lion with no resolution of the problems.

Click the Finder icon on the Dock.
Applications > Utilities > Audio MIDI Setup
Built-in-Output
Output tab
Move the Master volume slider to the right a bit.
Best.

Simultanious audio output from both mini Displayport and Audio Output port?

Hey guys,
I was wondering if someone who already has audio+video output through the mini displayport set up can be so kind and answer the following questions for me:
Can audio be output simultaniously from 3.5mm audio port as well as the mini displayport? That is, if I output both video and audio to my reciever through the 2010 iMac's mini Diplayport, can i use the standard audio output port to provide line input for a further set of (active) speakers (analog would be fine)?
In the case both outputs CANNOT work simultaniously, which one will work if i have both plugged in? If the mini displayport has higher rank (or priority or what whatever i should call the one that works when both outputs are plugged in), and the reciever it is plugged into is switched off, will audio automatically switch to the standard audio port? Same question goes if the standard audio output port has higher rank/priority?
Many thanks in advance!
Just in case you are wondering why the heck i would wanna do that, here's some background:
I am planning on setting up my new 27' iMac on a 'work' desk in my bedroom, where i can comfortably sit and work on the computer as well as use the beautiful screen as my bedroom TV. Since i also wanna use my mac for all my living room multimedia needs (movies, tv shows, music, etc), i plan on running a long (15m) audio+video HDMI cable all the way up to my reciever in my living room. Furthermore, i am also planning on running a USB cable to the living room (through something of this sort: http://www.coolgear.com/images/171632pro.jpg) plugged in to a usb hub mainly for mouse/keyboard availability in the living room, but also for other things such as external hard drives and so on. The problem is that, apart from having my audio play in the living room, i also want to provide line input to my reference monitors that will be located at the iMac desk and i obviously much prefer i get the line input directly from the mac rather than running a third cable from reciever back to the speakers.
Message was edited by: Leeon

Anyone?
Is that so few people are using the new mini displayport for audio, or did i ask the wrong way?
Help will be greatly appriciated as i need this info in order to plan my purchases!

Selecting audio output from iPhone - bluetooth or dock?

Hi
I have a problem selecting audio output on my iPhone 3GS with my incar system
Set up:
Dension ipod dock connected direct to CD changer port on Radio
Bury Bluetooth hands free device.(CC9060)
My preferred option is to have the Dension play my audio.
However when I turn on the iPod function on the iPhone, the audio defaults to the Bury hands free system and tried to stream the audio via bluetooth which the phone cannot do.
On the bottom right of the screen on the iPhone, I see a speaker icon - I click on this and I get the option to select the iPod Dock or the CC 9060 (Which is the Bury Hands free)
I can select the iPod dock and teh audio plays fine, however, how to I force the iPhone to always use the iPod dock and not the Bury hands free.
From what I can tell, its not the Bury which is forcing teh choice - its the iPhone, but I cannot see anywhere where there is an option to choice the iPod dock as the default audio device.
Any one have any ideas?
Thanks
Glenn

Found a quite probable fix.
I've took my dock station under big lens and noticed a stuck contact -- they are supposed to be somewhat movable. So I pick a real small screwdriver and unstuck the contact.
Issue is apparently gone.
Message was edited by: Alex HQuest

No audio output from built in audio

I do a lot of music production/recording on my mac, and to do so I use a firewire audio interface as my audio input and output while recording. When the device is not plugged in my mac usually automatically switches to the built in speakers or headphone jack for audio output. Tonight when I was done recording, I unplugged the interface, opened up iTunes, and went to turn the volume up, but what I got was the little pop op graphic of the speaker, with a little crosse out circle (like a no smoking sign). Now under my system preferences, built in audio is no longer listed as an option for output. After rebooting the machine the problem persists. Any thoughts?

You might try resetting the PRAM:
http://support.apple.com/kb/HT1379?viewlocale=en_US
If this does not work then I would run "Repair Permissions" from Disk Utilities.

Mac Speech Dictate and other Audio Recording Questions

Thanks again for this great resource. I have a Macbook Pro, my first issue is I want to record audio from my stereo system, through the headphone output. I can't use the cables because I have an AV splitter, I have a DVD, Satellite, TV, all going through the splitter and to the stereo system, so I need to record stuff to my Macbook Pro from the stereo headphone output.
How is this accomplished?
My second question, is it possible to use Mac Speech Dictate to pull segments of audio from a radio talk show into typed text? I sometimes write transcripts of talk radio segments for a blog and it takes such a long time to pause, type, pause, etc. I am looking for the best solution to just play the audio and have the program type it out.
Once I have the best program, how would I get the audio in, would the internal mic pick it up if I played the audio through my stereo system at a loud volume?
Thanks for your time and any assitance you can give me.

Hi there,
I'm having issues understanding what you want to do with the cables from your stereo. Do you want to record the talk show from the stereo into your MBP? If so, then you can use a simple Y-adaptor (Stereo RCA -> 1/8" minijack) to connect your stereo's audio output to the MBP's line-in jack. Or, are you trying to go the opposite direction? MBP to stereo? Sorry for my confusion.
Edit: I'm sorry, I completely misread your first post. If you want to go from the stereo's headphone jack to the line-in on the MBP, you only need a 1/8" to 1/8" male-male cable. Is that what you were looking to do?
--Travis
Message was edited by: Travis A. (Thanks)

Question for music producers ! MacBook Pro and my audio interface from Virus Ti doesn't seem to work properly after I updated 10.9.4 Mavericks

Hello
Few days ago I upgraded my Macbook Pro to 10.9.4 Mavericks And I’m using the sound card from the Virus Ti for all audio in/out and when I’m not producing music , I usually close my Logic and I use the Virus Ti as a sound card for listening to Soundcloud or iTunes on my Mac and the audio usually come out of my studio monitors , but right now even when everything is connected , the sounds from the web site is coming out from my Macbook speaker instead of my studio monitors ? and I already checked the “Output/Input” in preference and is already say Access Virus Ti and I already repair disc too ! ,
Right now when I’m using Logic to produced with Virus sound card everything is working fine and the audio is coming out of my monitors but as soon as I turn off Logic to use Youtube or other web site, the audio automatic switch back to laptop speakers ?
If anyone had this problems with their audio interface and OS 10.9.4 , please advise !
Your help is much appreciated : )

@michelle929 don't feel so bad, i too which i never would have upgrade to ff4, OMG, so piss., worse is they deleted the old version from my computer, how dare them..lol... but most of the thing i use now don't wanna work.. i want my 3.6.15 well i think that was the last one i had.. piss piss,,and Michelle your not whining , just stating the fact's.. give me back the old version Mozilla... can't even find it on here,, any one knows where i can find it... if not gonna have to go to a server an get it,,
thanks Lotta firefox. great job, not tell us first hand what won't work....:(

Help!! No AUDIO output from iMac through FW to mixing board (zed r16)

With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?

Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

Voice dictation and no audio output from speaker

Similar Messages

Maybe you are looking for