Voice Issue

Dear Support,
I am using Iphone 3gs, version 5.1.1
from today morning, the sound is not working means voice is coming only on speaker even with hands free.
but without handsfree voice is not coming.
Pl.help me to fix this issue.
Jeevan

I have called to my Operator Orange IL. The told me turn off my mobile for 3 minutes to reset my network connection, they did some with my sim remotely and then turn on, in additional a got a call from Nokia Care Point Israel, they told me to call after 1 week to check the FW again, bacause they just get the FW and do some tests on it.
Message Edited by perlik on 02-Aug-2009 05:05 PM
Everywhere is well, where we weren't yet
Mobile: iPhone 3GS 16 GB
FW: 3.1.2

Similar Messages

Did iOS 4.0.1 Update fix Bluetooth muffled voice issue?

can you guys report if the iOS4 update released Thursday addressed the problems with the Bluetooth connection/sound quality/voice clarity?? I haven't updated my iPhone 4 yet so I can't test for myself. But i'd like to know if the muffled voice issue has been resolved, thanks!
(My bluetooth device: Plantronics Voyager Pro)

omg.. okay.. i thought about going to Costco and buying a Jawbone just to test it out.. but sounds like you guys have tried w/multiple bluetooth devices and it's not helping any .. what's even more sad is you've also stated you've exchanged your phones and it still doesn't get any better. i was hoping an exchange would help~i have read some ppl's stories that they exchanged their phone and their bluetooth problems got resolved (one guy even reporting ,w/a pic to show, being ~40ft away w/no issues!).. i get about 20ft and my bluetooth just straight up disconnects!
but this is the crazy story:: im having a unique issue in my kitchen (which is very very small!).. i put my phone on the dining table and walk 4ft to the sink and ppl say i sound robotic, like the Transformers talk in the movie.. but if i walk elsewhere (not into the kitchen), it seems to work ok. now i have a Nextel phone too.. i can repeat what i do and not have any robotic sounds.. i have never had any problems using my bluetooth with my Nextel or my iPhone 3G, never ever-ever!! whut the heCKKKKKKKKKKK!!!!!!!!!?!?!?!?!

4.3 Upgrade S Voice Issues

With the 4.3 upgrade, the SVoice recognition and audibility is terrible. The previous voice was pleasant sounding and very understandable, but the new voice sounds nasally and is difficult to understand. It also does not recognize my commands as well, and often replies that it can't find a network connection. Is there a way to get the previous SVoice back? Is anyone else experiencing this problem?

I'm also having this along with many other issues brought on by the 4.3 update. Unfortunately, there are no announcments for a fix to these issues. There are many frustrated users out there experiencing much worse (including myself). See below for a short list of 4.3 issues:
Major issues in new Android 4.3 update for Galaxy S III:-
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby and sometimes a few minutes)
- Random Freezing
- Huge battery drain
- Bluetooth Audio issues during playback in car
- Stuttering music playback with stock Samsung music app
- Device freezes as soon a call is received (Black screen issue)
- Poor RAM management (very difficult to multitask)
- Wi-Fi issues

Oneway voice issue problem detected still no solution

Hi,
I'm using cisco3825 as a voice gateway with concerto dialer software for outbound dialing for a call center.Agents are facing voice problems :like they can hear the customer but customer can't hear them.But it's not for all the agents at a time.
I tried out and found some logic.Dsp resources which are using g711ulaw tx is 0, so voice no transmit.However no issue with g729r8 codecs
Attaching my voice cofig and output.
Is there any way only g729 codec use no g711 ???I'v tried several options but still not found any solution.
Regards,
Sourav

Hi Sourav,
Are you using CCM or CCME? Or other Switch?
Which IOS you are using?
So when you only use G711 you experience this problem?
Let me know so we can narrow down the issue.

5s incoming call voice issue

I couldn't receive incoming call voice. Just could receive incoming call voice with ear speaker, headphone or built-in speaker.

Huh? What exactly is your issue?

AIM Voice issue

I have K7N420 Pro MB
Maxtor 80G HD
256MB RAM
AMD 1800+ CPU
ACER CD burner
350W Ps
Using on-board NIC, Sound, Video.
External WebSTAR Cablemodem w/NAT Firewall, DHCP
AIM chat works but AIM voice does not.
I can record and play back using my microphone and speakers attached to the audio connectors on the rear of the computer.
Even setting computer on DMZ in Cablemodem, AIM voice does not work.
Is there anything in MB drivers set that is incompatable with AIM Voice?
Has anybody had success using AIM voice with this MB? :(
Thanks
Blafay

This issue occurs because Advanced Integration Module (AIM)-Cisco Unity Express (CUE) has run out of space. The problem centers around the clean up procedures that run on the module. This process is not running properly, so the module is not cleaning up the database and logs file as expected.To resolve this issue, clean the disk first. This defect applies to CUE versions 2.0.1 and 2.1.1. For a permanent solution, upgrade the CUE version to 2.1.2

Probook 4540s voice issue

My laptop Probook 4540S core i5 , 6 GB ram ddr3 , HD 750 GB , visual card 2 GB Radeon , Windwos 7 ultimate 32 Bit Service Pack 1 .
My problem is the voice is too low at any vedio/audio player otherwise all the drivers installed correctlly so i can't recognize the problem and the solution .
thank you

Hello Carbon55,
Your ProBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Nokia C3 - Voice Issue

I bought a Nokia C3, last month and after 2 days of Purchase, I'm having problem with it's Voice clarity. Echo is there and a lot of distrubance was also there. I got it repaired through Nokia Care, but even after that, the Echo problem has not been solved yet. Some other people who are using Nokia C3, told that, even they are having the Same Problem. Kindly advice what has to be done .

Do you use a bluetooth handsfree or other bluetooth device? If yes, does this echo effect start after disconnected from the bluetooth handsfree and using the standard phone mic/speaker? Does the echo only exist on the caller's line (you don't have it, only the caller say there is a terrible echo on line) or if also you have the echo does the other person has a similar phone?
I have a possible explanation that the echo effect is somehow relating with handsfree devices and appears after disconnected from the device. But it is possible that also something else start it.
I have noticed that the only ways to stop the echo is either:
1) Reconnect the handsfree device then the echo voice is gone and the caller can continue speaking even if you later disconnect the handsfree during the same call.
2) Re-boot the phone and call back. It does not help to call back but you have to shut down the phone before calling back.
The same echo problem seems to appear in C5 and E5 and maybe also E7. I quess that it might be software bug because it always stops after rebooting and also trying to use a handsfree for a while helps.

My Phone 5s has two voice issues

1) Siri stopped,working.
2) I can't use the voice function to create text messages.
Thanks for the help.

Make sure Siri is enabled here:
Settings > General > Siri

6500 slide voice issue

Hi all,
This is my first post so I hope someone can help.
I have a 6500 slide and have been told that you can set the phone to voice the name of a person calling you (if they are in you contact list)
Can anyone advise how I switch this option on
Cheers
MrFish
Solved!
Go to Solution.

some phones may have the application in it but s60 phones are more complex than s40 and there is a great range of apps and tools for these phones check this site out and have a look http://mosh.nokia.com/
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Voice Memos Issue - 3GS

I have an iPhone 3GS and I've had it for about a month.
I have a band and we rehearse in a small storage space. I'd like to use my iPhone to record our rehearsals for when we come up with something good.
Our first rehearsal, everything worked fine (though the recording sounds quite bad since the phone was being overloaded the whole time - but an overloaded recording is better than no recording). But tonight something weird happened. I noticed that Voice Memo stopped recording in the middle of us playing. I tried recording after that and the volume meter was not going up. I tried turning off the iPhone and turning it back on but it kept going in and out of whether it was picking up sound or not. The room was very loud the whole time, so it's impossible that the meter was reacting correctly. I checked the recordings and some parts have audio and some parts are just blank.
I also noticed that sometimes when I was holding the phone it worked, but when ti set it down on my guitar case, the needle stopped moving.
It was like if you have a bad audio cable or something. The sound just pops in and out - that's how the meter was reacting tonight, even after restarting the iPhone.
What could be the issue? Is Voice Memo a buggy app, or is my iPhone defective? I've made a couple calls since the rehearsal, and there were no voice issues, so I know the mic is not broken or at least completely broken.
Thanks

Hi,
I also have this problem on my 3G running os 3.1.3
Any third party app or voice memo doesn't get any audio from the mic (apart from a wierd spike if you blow directly into it) but using the phone app, the voice comes through perfectly.
It there a separate protocol being used by the phone app and other apps?
If it helps, I noticed the problem in EXACTLY the same way (ie, recording a band practice, where one of the recordings just trailed off).
The microphone has been intermittent ever since.
As far as I can tell, this is not a very common problem, but I have seen a few other posts on another topic with this problem.
Hopefully it will be resolved in OS 4, as the standard 3 steps didnt work.

I wish Digital Voice Support would resolve my issue.

So I have had an ongoing Digital Voice issue for a month now, I have had several conversations, several trouble tickets opened and they have been closed and the issue is still not resolved. I spend over $200.00 a month for this triple play and all of a sudden I can't access Digital Voice, I can't block numbers, I can't turn on Do Not Disturb nothing. So I added a topic on here earlier to vent my frustration.
I wonder why Verizon can monitor these boards quickly but can't resolve easy issue as quick. Perhaps they should hire QUALIFIED Technical Reps, rather then these people that have names you can't pronounce, when you call you are on hold for atleast an hour, when 90% of the time you are blindly transfered into another queue where you have another hour long wait. I have reviewed many posts on here so I am just one of many that find that the technical support is lacking at best.
Does anyone have a email or telephone number to a Supervisor at Verizon? Maybe if I can contact a supervisor rather than a glorified operator I may get this frustrating issue resolved once and for all.....
CAN SOMEONE PLEASE HELP!!!!

Good morning rpenman65,
Sorry for the delay in resolving your issue, but we did get it taken care of. Our team got in contact with the online account specialists who were able to merge the old and new account names to properly configure the profile. Please let us know if you need anything else and I hope you have a wonderful day.
Thank you,
Rachel_VZ

Google Voice Won't Work With Bluetooth Headset After Jelly Bean

I am SO frustrated. I had no idea I was installing the Jelly Bean update when I updated the software on my phone. Note to Verizon Communications team: PLEASE do a better job of communicating significant software updates. I would not have installed Jelly Bean. I learned long ago to stick with factory OS on my phones.
Since the update, I noticed that I could no longer dictate texts and emails. Also, my call recording app no longer worked. I switched to Swype and it would work for a few minutes and then stop. I could still use my bluetooth headset to make calls and S voice worked (although, like others here, I noticed that it's now worse--it doesn't recognize any contact names I request anymore). After trolling Android forums I found that the problem is with the bluetooth headset. You can still dictate when the phone's bluetooth is on, but when a device is connected, all bets are off.
I almost did a factory reset, but then I read that a hard reset will not restore ICS, nor did it resolve this bluetooth Google Voice issue for the few people who tried it already. In fact, resetting caused more problems (eg., more battery drain and removal of Adobe Flash, etc.).
Does anyone know how I can go back to ICS? Bluetooth and Google Voice are the two features I value most in my phones. This is a NIGHTMARE.

rcschnoor -
The Bluetooth/Voice Search/Dictation issue is a valid issue for the OP, a valid issue for me and oh yeah, the hundreds of other people affected by the, "Google Voice Search stuck on "Initializing" bug filed here on the Google Android Project page. Here is yet another reference to the same issue from Android Central.
The "Google Music freezing after Jelly Bean Update on Galaxy S3" is also a valid and documented bug located here also on the Google Android Project page.
So I ask, how does sharing with these people that do have these issues, and are affected by them, that you are not experiencing these issues help in any way? Isn't that the whole purpose of a community forum to help others?

Porr Voice on outside call with CME using 7902 & 7970

Dear All,
i'm working on a simple configuration.
I'm using a 2801 with 14.4.t1 for CME 3.4.
All is working fine inside, so i can call without problems others CME users.
The problems come when i call outside trought a BRI, with these calls i hear a lot of noise...any tips?
Here mye config:
dial-peer voice 1 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/0/0
forward-digits 3
dial-peer voice 2 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/0/0
dial-peer voice 3 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/0/0
dial-peer voice 4 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/0/1
forward-digits 3
dial-peer voice 5 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/0/1
dial-peer voice 6 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/0/1
dial-peer voice 7 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/1/0
forward-digits 3
dial-peer voice 8 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/1/0
dial-peer voice 9 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/1/0
dial-peer voice 10 pots
description ** BRI pots dial-peer **
destination-pattern 0113
port 0/1/1
forward-digits 3
dial-peer voice 11 pots
description ** BRI pots dial-peer **
destination-pattern 0T
port 0/1/1
dial-peer voice 12 pots
description ** BRI pots dial-peer **
incoming called-number .
direct-inward-dial
port 0/1/1
telephony-service
load 7902 CP7902060000SCCP050124A.sbin
load 7971 TERM70.7-0-1-0s.LOADS
load 7970 TERM70.7-0-1-0s.LOADS
max-ephones 24
max-dn 72
ip source-address 10.0.0.1 port 2000
system message xxxxxx
user-locale IT
network-locale IT
time-zone 23
time-format 24
date-format dd-mm-yy
create cnf-files version-stamp 7960 Feb 21 2006 23:25:25
voicemail 6000
max-conferences 8 gain -6
call-forward pattern .T
moh music-on-hold.au
web admin system name admin@local password admin
dn-webedit
time-webedit
transfer-system full-consult
directory last-name-first
ephone-dn 1
number 101 secondary 269969201
label 101
description Interno 101
name Interno 101
ephone-dn 2
number 102 secondary 269969201
label 102
description Interno 102
name Interno 102
ephone-dn 3
number 103 secondary 269969201
label 103
description Interno 103
name Interno 103
ephone 1
username xxxx password xxx
mac-address xxxx
speed-dial 1 102 label "Interno 102"
type 7971
button 1:1
ephone 2
username xxxx password xxx
mac-address xxxx
type 7902
button 1:2
ephone 3
username xxxx password xxxx
mac-address xxxxx
type 7902
button 1:3

Try adding the following commands -
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 bri 0/0/0
network-clock-select 2 bri 0/1/0
This will ensure the DSP's use the same clock reference that is coming in on the BRI ports. This often clears up voice issues on Basic Rate Interfaces.

Is it possible to change online 'voice' on the Mac?

Is there any software or hardware that can convert voices while streaming into a real-time role-playing web environment? E.g. female>male, male>female, etc?
As far as software goes there seems to be a lot available for Windows, but nothing for Mac that I have seen. PCs seem superior when it comes to voice issues (for example Dragon is PC-only and yet its the best by miles). Is voice conversion another poor relation? Do I need to buy a PC to do this?
Does anyone have any ideas? I would prefer a hardware solution that I could plug a headset into, but software I would also consider. After all, it should be easy enough - it's just a matter of altering the pitch up or down, while reducing or increasing bass frequencies at the same time. Something a schoolkid could design, but I don't know where to even look for it, so any help would be appreciated.
iMac G5 17" 1.5Gb RAM Mac OS X (10.4.9)

Maybe I wasn't quite clear enough?
I'm talking about streaming voice chat into online environments such as World Of Warfare or Second Life. I want to convert my own voice (from a headset, say) through a piece of hardware, or software, that will take my voice, process it, and output it as an audio stream. I DON'T want it output to a file (as Djay does for instance), I want it as an uninterrupted stream - my voice as input, the processed voice as output - with maybe a half-second delay to allow for the processing.
E.g. I want to change my voice from male to female? Or vice versa?
iMac G5 17" 1.5Gb RAM Mac OS X (10.4.9)

Voice Issue

Similar Messages

Maybe you are looking for