Voice mail for one user with two extensions

Environment:
Cisco Unified CM Administration System version: 7.1.3.30000-1
Cisco Unity Connection Administration Version 7.1.3.10000-68
We have a user this year that will be wearing two hats and will have offices in two different locations. I have both extensions as a line on each phone. Now I just need to point both extensions to the same voicemail box or give the user two mail boxes. It seems that CM Administration only supports one voicemail box per user. I think it would be easier for the user to only have to check one mail box by having both extensions point to the same VM. How can I accomplish this?

Hi Andy,
Let's say the user has numbers 7005 & 8450 but we want only one mailbox
@ 7005. There are a couple of ways to do this.
In CUCM go to> Feature> Voicemail> Voicemail Profile and  create a new Profile called XXXX (whatever name you want) with a  Description called "XXXX username Mailbox" the Voice Mail Box Mask will be 7005> Save
Then  via CUCM go to the Users Phones> under Directory Number Config for 8450> Voicemail Profile and change to XXXX (created previously in  above steps)>Update>Reset
Now when a call routes via forward to Unity Connection it will reach the Mailbox @ 7005.
Or in Unity Connection set up Alternate Extension so that 8450 is an Alternate Extension for 7005 etc.
Cheers!
Rob
"I don't know how, I don't know when
But you and I will meet again " 
- Tom Petty

Similar Messages

  • Unity 3.1(5) prblm retrieving voice mail for single user

    I have a customer with one user who cannot retrieve their voice mail new / saved. When she logs into via their extension it prompts for option 1 new 2 saved. Taking option 1 and it loops back to the begining. I have refreshed and sync MWI and also checked the TSP settings and also the Exchange server. Have rebooted Unity and still the issue remains. Any ideas or possible resolves?

    Did you check the phone? is it same from any phone? re create the mail box and see another option.
    Baseer.

  • Jabber voice mail for some users.

    Dears,
    J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set  for both service profile is Unified CM IM and presence.
    I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
    Thanks

    Dears,
    the profile are different, but if i put the the other users working profile also it is not working.
    The voice mail server is showing not connected in jabber,
    Any hints.
    Thanks

  • Mail stuck - Cant download mail for one use

    My mail server running 10.4.8 was running fine, until yesterday I cant download mail for one user. I know there's mail in the account verified by the usage in Server Admin.
    Using Mail a second account I have still works fine, but one of them wont retreive my mail. For that one account Mail has a spinning wheel for half a minute at least whereas the working account stays on for half a second. Both accounts are POP only.
    I've tried Reconstruct on that account via Server Admin. I've also installed mailbrf and ran -m on that account and -f on the database. I've also restarted my machine. No change.
    I've turned on POP logging to debug, and the log is identical for the working and non-working account.
    Any suggestions?

    MY GAWD! I just got all my mail! lol. Here's what changed....
    Nothing at all was changed with the server.
    However I recently got a new wireless router and swapped them, and after that all my mail came through. I dont understand this.
    Before cloning the router to get it to work, I plugged my new wireless router to my ISP and I was assigned a new IP, so that was one change. Another change is the brand of the router and possibly the settings, however I think I set it up identically (ie. same WAN/LAN IP, same ports forwarded, server still has the same static IP.
    Both mydomain.com and mail.mydomain.com point to my server via my router, and even though I check my mail from within the LAN side, I connect to mail.mydomain.com so it connects outside my network. And nothing changed with my domain settings other than me changing the IP address for both my domain and subdomain.
    So in summary the changes are:
    1. New wireless router (but same configuration for the most part)
    2. New IP address
    I still dont understand why I was unable to retrieve my mail before. I'm going to leave his question as 'unresolved' to see if I can understand what happened so I know for the future.
    Thanks for all your earlier suggestions and I look forward to figuring out what the problem was.

  • How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

    This is complex.  Until today we had one iMac with two user accounts - one for me and the other for my wife.  We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us.  Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd.  (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
    We've finally bought my wife an iPhone and set up an iCloud account for her.  And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff.  But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine.  But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
    Originally I tried a workaround by simply having her iPhone log into my iCloud account.  That works great for the calendars and the contacts.  But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account.  And neither of us want to sync our other things to each other's iMac accounts or iPhones.  Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's.  So we definitely don't want this as the set-up and communications network between our devices.
    We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone).  Does this description make sense to you?  I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work.  If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
    If anyone can help me set this up I'd be most appreciative!  Thanks so much.  Merry Christmas and Happy New Year to all readers in this community!

    BobT.
    I had the same problem, and decided to look into it last night.
    First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing. 
    Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
    1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
       Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
    2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
    From this point on, the 3 devices should sync contacts with each other.
    This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

  • Share calendar on two Ipads (one Imac with two users)

    Hi community,
    I'm looking for some help and where to look for if not here. Let me quickly describe my setup at home and what I try to achieve.
    My partner and I have both their own iPad and iPhone. There is one iMac where we live. We are using it together but each of us has it's own user account on it and therefore it's own Itunes library. Both of us are using the iCal calendar on the iMac which we sync with our iPad and iPhone.
    So there is one iMac with two users on it. Each user syncs his iCal with his iPad and his iPhone. What we would like to achieve though is that we can cross-share our iCal calendar. So that my partner can see my calendar items on her iPad and iPhone and vice versa.
    We do not have a google mail (calendar) account nor are we using iCloud.
    Every help is very much appreciated.
    Legerea

    Dear Dah,
    I now have two iPads, which I also (need to) have separate AppleID's for. I understand I can share apps between them if I authorize iTunes on my iMac with both ID's, but I am not quite sure about the correct way to do that. I already have the iMac authorized for AppleID#1. If I go into iTunes and click on Store/Authorize this Computer... and enter my AppleID#2 information into Account name and Password boxes, does this authorize my iMac's iTunes for BOTH ID's or does it just change the authorization from ID#1 to ID#2?
    If the former is correct, I understand the way to proceed is to xync up both iPads to iTunes and then I can drag and drop apps from one iPad's library listings to the other, right?
    If this is not the correct way to get dual authorizations, what is?
    Thanks!
    pax / Ctein

  • I need to share my Itunes library on one computer with two user accounts

    I have one computer with two IPODS. I would like to share the music I already have stored on one library with another user library. How do I do this?

    See if this helps: iTunes - How to share music between different accounts on a single computer
    There are a few different ways to use two iPods with one computer, have a look at this help page for suggestions: How to use multiple iPods with one computer

  • How to share one laptop with two iPad for iTunes acc

    One laptop with two iTunes acc...

    It's possible. You just have to be very diligent about signing out of one account to use the other.

  • I want to install an app but only for one user on my imac with Lion

    I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

    Setup of iWork in your wife's account should only occur the once.
    Updates can be performed through your account and are usually performed via Software Update.
    Messages should not be popping up in your wife's account if all the iWork updates have been performed.
    Go to Software Update and download and install all the iWork updates.
    Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

  • Unity: Voice-mail for non-Exchange subscribers

    Hi everyone!
    I have this issue: customer wants to enable voice-mail for non-Exchange users, I've created them as Internet subscribers for using with auto attendant, but I can't enable voice-mail for these extensions, basically the customer does not want for this users to receive the messages in their mail just only check it on IP phones. Is there a possible way???
    Thanks in advance for your help

    To add to Hailey's comment, here's the documentation that explains the behavior/limitations of Internet Subscribers in case you're interested in checking it out:
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet040e.html#wp1050583
    Hope that helps,
    Brad

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • Users with two monitors

    Hi:
    I have an application using either JInitiator 1.3.x or Sun Java Plug-In 1.4.2.x which works fine.
    But I have several users with two monitors and if the user move the application to the secondary monitor the menu didn't work (using JInitiator or Sun JPI).
    We are trying to move our iAS configuration to use only Sun JPI.
    Is any solution for that behavior of the application when I have two monitors.
    Abdel Miranda
    Panama.

    Has anyone tried to apply this patch to a middle-tier installation of just Forms and Reports Services, rather than a full Oracle AS installation? Do you know if this patch can be used in this way? The Readme is full of info about things like OID and Metadata Repositories which don't really apply to us.
    I'm also worried (and unclear) about what databases are supported by this patch - in one place it says the minimum db version for patch 10.1.2.2 is DB 10g, whereas elsewhere it talks about only needing DB 9.2.0.7. (Neither of which is good for us, we're still on 9.2.0.6.) But then, for an install of just Forms and Reports Services, maybe I won't need to apply the database part of the patch..?
    I'd be intererested if anyone else has patched a pure Forms and Reports install...
    James

  • Can we perform two actions with one button with two clicks one after other?

    Sir,
    can we perform two actions with one button with two clicks one after other?
    I want that when I click an Add Button first time it add data to the database and when I click again this button it clear the form data to empty fields.
    Regards
    Tanvir

    In code it should be easy.
    The following code adds a button called butman with a text "ADD".
    It then registers a listener that will be called if the button is clicked.
    This listener then calls the runAddData method if you clicked on butman while it contained the "ADD" text and it will call the runClearData method otherwise.
    Therefore it will swap the button's functionality between ADD and CLEAR on every click.
    final Button butman = new Button("ADD");
    butman.setOnAction(new EventHandler<ActionEvent>() {
              @Override
              public void handle(ActionEvent t) {
                        if (butman.getText().equals("ADD")) {
                                  butman.setText("CLEAR");
                                  runAddData();
                        } else {
                                  butman.setText("ADD");
                                  runClearData();
                        } // END IF-THEN
              }});I hope this is what you wanted.
    Some extra food for thought.
    You might want to run the ADD and CLEAR methods in their own threads so that it can run in the back ground, without slowing down your user interface.
    I also like to rather reuse one button for multiple functionality in stead of making an application with hundreds of nodes only used rarely with masses of code to show and hide them if needed.

  • MM01 tcode for SD user with restriction to SD related codes only

    Dear Experts
    How can we assign MM01 Authorisation for SD user with a restriction that he can access only <b><u>SD RELATED MATERIAL ONLY</u></b> ?,     Why because the material master is same for   <u>MM Module</u>   and   <u>SD Module Product Master</u> also.
    There is no listing for Material Group parameter in the Material Object
    Material Type Object : M_MATE_MAR
    Material         Object : M_MATE_MAT
    Thanks in advance
    Please advise me.
    Regards
    PS Prasad

    Dear Corinne Müller 
    First of all, let me say Sorry for the late reply to your post.
    I have gone through the objects you have told to that particular SD User.
    He have been already assigned those objects.    But one thing I have observer
    here is the authorisation object you have given    M_MATE_WGR
    contains 2 parameters those are
    (01) Activity                       01, 02, 03
    (02) Authorization Group
    The above said (02) parameter does not contains any data to select in its dropdown box.   I think functional people does not created material groups
    while doing configuration part.
    So, here I can not distinguish the material whether it related to SD Module OR MM Module. And can not restrict user's to access TCode MM01 basing on their module related material only. Am I right ????
    Any further suggetions ?????
    Thanks for your reply.
    I am just learner in BASIS.   Kindly be in touch with my e-mail id.
    My E-Mail id : [email protected]
    Thanks once again
    PS Prasad

  • UWL Subview does not show for one user

    Hi All - We have a UWL Subview. It is working fine except for one user. He cannot see the entire Subview drop down box at all. It is as if it does not exist. I've verified he has the tasks for the Subview to appear. Can anyone give some ideas as to what other possibilities this can happen? I've tried several things. Verified with security no roles exist for functionality within the UWL. The user have tried going to our QA system and logged in as a test user id - Subview visible. His ID is valid and active in ECC. If you don't have a direct answer, maybe you know of tools on how to debug or trace the UWL. I've seen two threads exactly like my situation and they receive no responses. Hopefully, there is something new to my request.
    Thanks in advance.

    The issue is resolved. In the Portal UWL Admin screen, the user showed personalization settings for the Subview. We decided to delete all entries. He can now see the Subview drop down. It is weird because on his own his access to his own personalization settings is empty.

Maybe you are looking for