Voice Mail Indicator

I can retrieve my voice mail the indicator icon does not appear on my screen.  Also, I just changed my profile setup to vibrate and make a noice when I have a voicemail.  Just tested and nothing happened. 
Please help

Have you tried a "soft reset" on the device by removing the battery then allowing it to reboot?
(VM inticator issue may be resolved.)
www.e46fanatics.com

Similar Messages

  • My Voice mail indicator not working I have no idea I have voicemails how do I get it to work again with out hard reset?

    At somepoint I have been getting voicemails and have not known it because the voice mail indicator is turned off. Called my voicemail and that is not an option when I go to my personal options. I am out of service due to the building that I work in and do not reiceive calls and missed calls do not always show up.. so indicator is needed. PLEEAAASSEEE HEEELLLPPP!!!

    Okay so I did all that and I noticed that when someone calls me and my celullar data is on the voicemail registers..... when my cellular data is off and a call comes in and goes to voicemail.... it does not register until I go to call someone else then the notice comes on for as long as I am on the phone.... if I do not make a call for a few days I never know that I have a phone call. I turn off my cellular data since I only have 250MB for the month... and most of the time I am in a wifi zone....which make me wonder if my cellular data is turned on and I am in a wifi zone and should miss a call since the wifi takes over would I get the notice... I should not have this turned on all the time for the sole purpose of knowing if at some time I am in a dead zone and miss a call or not sitting right next to it.... my office is a dead zone as it is in an industrial building..... this is very disappointing especially since it was working for me at some point..... in conclusion still not working

  • My voice mail indicator is not showing new messages

    The message indicator not lighting up...collecting messages for several days without me knowing it. What do I do?

    this is probably happening because your carrier doesn`t support visual voice mail, so your iphone won`t count your voice mails and show it to you.

  • Voice mail indicator not working I've tried the steps in voice mail - personal options, 1 to set the indicator to on but 1 is an invalid option:

    Documentation says to go into voice mail, select to change the personal options, then 1 to set the indicator on but 1 is not an option on my phone.

    Okay so I did all that and I noticed that when someone calls me and my celullar data is on the voicemail registers..... when my cellular data is off and a call comes in and goes to voicemail.... it does not register until I go to call someone else then the notice comes on for as long as I am on the phone.... if I do not make a call for a few days I never know that I have a phone call. I turn off my cellular data since I only have 250MB for the month... and most of the time I am in a wifi zone....which make me wonder if my cellular data is turned on and I am in a wifi zone and should miss a call since the wifi takes over would I get the notice... I should not have this turned on all the time for the sole purpose of knowing if at some time I am in a dead zone and miss a call or not sitting right next to it.... my office is a dead zone as it is in an industrial building..... this is very disappointing especially since it was working for me at some point..... in conclusion still not working

  • E61 Voice mail indicator at start up - help please...

    I had a problem with my SIM card and had to have it replaced. Now every time i turn the phone on I get a "new voice mail" message on the screen.
    I've worked with my carrier (t-Mobile) and it does not appear to be on their end.
    I lieve in the US but can't get support for the E61 here.
    Can anyone help? Any ideas?

    read my post N73, VMI and SIM problemMessage Edited by supplier on 09-Nov-2006
    10:41 PM

  • How do I reset the visual voice mail indicator on the app?

    I have no vmail in my box, but the icon on my Motorola Droid Turbo shows 1 message.  Is there a way to force a re-synch or reset the vmail counter?

    Clearing cache and app data both did not fix the problem.  A power reset did. Thanks!

  • How do I get the the indicator light to work with Voice Mail

    I recently switched to Digital Voice.  I have a Panasonic Phone that has a light that indicates when I have Voice mail.  The light is NOT working when I get voice mail, however I get the stutter dial tone when I have voice mails.  Is there something that needs to be turned on, if so where do I find it.

    It's something we would have to check on on our end. I have sent you a private message to get more information from you.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Visual Voice Mail not working with Telcel

    I have 2 cell phones with Telcel in Mexico, one iPhone 4 (company) and an iPhone 5S (personal)
    On the company phone, Visual Voice mail works perfectly. But for almost a year I've been trying to get Telcel to fix it on my iPhone 5S with absolutely no success.
    They've reset my Voice Mail service on their end several times.
    They've told me I'm crazy and that the automated recording I get when pressing on Voice Mail is the correct service.
    They've told me they need to take my phone to a service lot and mess with it
    They've told me I need to fully reset the phone and delete everything on it for it to work
    One Rep even said that I needed the most expensive Premium VIP phone plan for it to work...
    It's amazing that the biggest carrier in Mexico has absolutely no training for their reps, or customer care and support technicians regarding iPhones, and scpecifically about this issue...
    About a month ago  the red indicator for new messages turned on, and I've done EVERYTHING and it still stays on, reset the phone, reset network settings, have the carrier reset the voice mail service, used a carrier provided app to reset the service myself (it does disable an enable), upgraded to iOS 8, setup as a new phone, still the same issue.
    Is there something Apple can do to enforce a minimum level of support from their business partners? If Visual Voice Mail did not work on my company phone... I would have no reason to complain, but its amazing that when I show both phones to the technicians with the different VM experience... they look at them like they are Moon Rocks, Asteroids, or a piece of God in my hands...  Frustrating not being able to get an answer from the carrier after almost a year...

    Well I guess we have to write in english although we are from mexico and speak spanish, so I have the very same problem but mine started not log ago when I upgraded to an iPhone 6 Plus, VVM worked fine then the red bubble appeared in the phone icon, I have gone several times and just like you say the reps know nothing, they have activated over and over, reset VVM, I have turned off and on my phone, actually it's 2 phones we have with the same problem.
    I just performed what pakoriv said and at least the red bubble went away but when i tap VVM it still calls *86 in both phones, the second one it's an upgrade from an LG phone so I understand if VMM does't work right away, but the first phone (or line) has been used with iphone since day 1.
    I'll let you know if pakoriv method causes another effect later on my phone.

  • Voice mail alert but no messages in voice mail

    Hi - after switching to new service provider I have voice mail message alerts on my blackberry pearl handset but when I go to my voice mail I have no new messages.
    Any ideas how to delete the message alert? Thanks!
    Solved!
    Go to Solution.

    Hello,
    Sometimes those get stuck. One way to unstick them is to, from a different phone, call your BB and leave a message. Then, from the BB, retrieve the message and delete it. Sometimes that can get the stuck notification indicator to release.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do i clean out my voice mail cache?

    My voice mail has been running slow and the phone store told me to clean my mail cache.

    1. Open your message app as normal and enter your pin code plus #, next listen to voice commands and press 1 to turn your message indicator off. Exit your message app and go into settings and next go to applications manager.
    2. Go to all apps and locate your message app
    3. Tap Force stop and then clear cache not data. Do a restart of your phone and go back to your message app and use as normal.. This should speed up your Voice mail messages .

  • Voice message indicator not working and I am missing calls/messages that I didn't even know I had...OS 8.1.2

    Within the past week or two, I have missed a few phone calls.  Previously, the missed call and voice message indicator number would appear to alert me--now it does not.  Do I REALLY need to constantly call my own voice mail to see if I have a message?  Related, my message list is not appearing, either.  Voice message asks me to submit my password each time and this NEVER happened before.  iPhone 5S, OS 8.1.2

    Hi and welcome to the forums!
    Ringtones:
    Highlight the ringtone/s that won't play, menu key properties, see what format it's in, and the size of the file.
    If it didn't load correctly it probably is  some thing like o-4kb. Basically empty. Second look at the file type
     (.mp3 .mp4 etc). Check the chart below to make sure it's compatible with the BB. You can always highlight the item
    and delete it.
    Screen,
    Pull the battery out while the phone is still ON, leave it for a minute,
    Replace and let the device reboot 1-3 minutes. See if the message indicator returns.
    Here is a list of compatible audio types:
    http://www.blackberry.com/btsc/dynamickc.do?externalId=KB05419&sliceId=SAL_Public&command=show&forwa...
    Please let me know about the screen indicator and the ringtone.
    Thanks!
    I this answers your questions, please resolve the post by placing the green check in the post that answered your questions.
    Thanks
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • BlackBerry Z10 - voice mails not showing on Hub after software update

    I have a BlackBerry Z10 smartphone with Verizon and yesterday I upgraded to the 1.0.4.1 version. Now my voice mails are gone from the Hub and I don't even get notifications whenever somebody leaves me a voice mail. I called Verizon and they were not able to help. Is anybody having this same issue? Can somebody help? Thanks in advance.
    Solved!
    Go to Solution.

    I had the same problem as you - including the missing voicemail option to add to the hub.  No amount of battery pulls or re-starts helped.  Here is what worked for me:  Go to Setup and activate Visual Voicemail.  Agree to the $2.99 monthly fee. Wait 5 minutes as directed and then call yourself and leave a voicemail or two.  You will notice the Visual Voicemail icon (and message indicator) now appears in the Hub.  Go back to Setup and deactivate Visual Voicemail.  Your regular voicemail, and test messages, should now remain.  Not sure if you/I will get charged the $2.99 for 10 minutes worth of Visual Voicemail but it will be worth it to get the regular voicemail back.  Hope this helps.  Post back with your results.

  • Why my iphone 5s voice mail answer call first and my iphone second.

    why my iphone 5s voice mail answer call first and my iphone second.

    Hello celazopdef,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning cellular issues:
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/kb/TS3406
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Jabber call to voice mail fails with fast busy over VPN

    I have an issue that I ran into with CIPC phones over a VPN.  If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail.  I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
    So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail.  I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail.  Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure).  WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711.  With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
    1. CIPC and Jabber share the same line
    2. VPN established and CIPC optimised for low bandwidth un-checked
    3. Over the same VPN the CIPC phone can leave a voicemail
    4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
    5. Voicemail environment is Exchange-UM over SIP trunk
    6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
    7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
    Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise.  Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711.  The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.                  

    We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year!  Every time I call in to report it they 'escalate' the issue but it never gets resolved.  The problem seems to be in the initial connection.  Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal.  I get the same message when I call back:  “I’m sorry – that account is in use at this time.  Please try again later!”  I have even called in with my cell phone and get the same message!  I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later.  If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.”  This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!!  I wonder how many people have the problem and just don’t bother reporting it because of the hassle?  When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!!  NEVER let them talk you into that!!!  It’s their problem and they need to fix it!!!!!!!  I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract!  Good luck if you have Verizon………

  • I Have No Voice Mail Notifications In Z10 Hub

    I have seen issues with Voice Mail Notifications in various threads, but I didn't see one having No Voice Mail Notifications In the Z10 Hub at all. Sorry if I missed a thread that applies.
    From what I was told by Blackberry Technical Support, at the bottom of the BB Hub next to "Calls", "Emergency Alerts" and "PIN", should be "Voice Mail" (or something similar). I have none and therefore do not get any notifications when I receive a Voice Message. I thought this was odd, and figured I had some settings incorrect, but that is not the case. It's just not there.
    I am in the USA on Verizon's network with the latest updated OS 10.1.0.2039 that they offered on a STL100-4, Z10.
    Anyone else have this issue?

    My wife had the same issue on her Z10.
    A quick call to customer service at AT&T and they set it up.
    Rebooted her phone, and all was well.
    I'm sure Verizon customer service can do this for you as well.
    Hope this helps.
    Sincerely -

Maybe you are looking for